Search NASA⌕ Search

SEARCH · Search NASA

Results for “Valorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Atomistic origins of biomass recalcitrance in organosolv pretreatment

Separation of lignocellulosic biomass components for use in sustainable energy and biomaterials applications remains challenging, since biopolymers such as cellulose and hemicellulose carbohydrates and polyaromatic lignin are found in close proximity within the plant secondary cell wall. Organic solvents have been used to pretreat recalcitrant biomass and separate the interacting polymers, solubilizing the lignin fraction for lignin-first valorization approaches. However, no single organosolv pretreatment approach has proven superior for heterogeneous biomass samples. Here we present a complementary atomic view of interactions between biomass components using molecular simulations, specific to lignin and cellulose, resolving mechanistic hypotheses for how lignin-cellulose composition influences separation processes. Further, using lignin-cellulose binding free energy calculated using molecular simulations, we find polar protic solvents such as methanol and ethanol separate lignin from cellulose, irrespective of the charge on the lignin monomer. Aprotic organic solvents (DMSO, THF, 1,4-dioxane) separate uncharged lignin (phenols and monolignols) from cellulose, while charged lignin (cinnamates) prefer binding to cellulose.

09 BIOMASS FUELS↗
DOE OSTI2024

Characterization of coal extracts and their performances as binder for new carbon-based structural units

Coal production and usage have been declining in the past decade due to the transition to renewable energies, environmental regulations to reduce environmental pollution due to direct coal combustion from coal-fired power stations, and administrative policies. This downturn has created tremendous challenges for the coal industry, and many states rely on revenue from coal mining. Developing new valorization routes with high coal demand is essential and using coal-derived materials to make engineered products does offer an eco-friendly, attractive, and value-added use. This paper presents a brief introduction to the extraction process to derive coal deposits, extracts, and residuals (CDERs) and a comprehensive characterization analysis to determine the suitability of CDERs as binders to produce an innovative construction material named the carbon-based structural unit (CSU). CDERs are used to prepare the CSU with or without using mesophase pitch (MP) as binders and selected CDERs are heat-treated and pressure-heat-treated to improve their binding capabilities. The performances of the CSU specimens are evaluated based on compressive strength, density, and thermal conductivity. The CSU specimens mixed with distilled residue (DR) to pyrolysis char (PC) ratio of 1:2 achieve a compressive strength of 54.85 MPa, which is higher than the compressive strength of 30 MPa of normal concrete. The CSU specimens with deposit (De) and tetralin insoluble (TI) require the addition of MP to obtain compressive strengths greater than 30 MPa. Furthermore, these CSU specimens possess a relatively low density of about 1 g/cm 3 and low thermal conductivity of less than 0.25 W/m.K.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Bioconversion of renewable feedstocks by Rhodococcus opacus

The production of fuels and chemicals from renewable feedstocks is necessary for a fossil fuel independent economy. Lignin and other industrial wastes represent sustainable, non-food feedstocks that can be tapped for microbe-based bioproduction. Rhodococcus opacus is a gram-positive bacterium capable of catabolizing a broad range of feedstocks, and recent technological advances have further established its potential for lignin and industrial waste valorization. In the process of developing R. opacus as a platform for bioproduction, metabolic profiling has elucidated its native mechanisms of bioconversion, adaptive evolution has enhanced its tolerance towards inhibitory feedstocks, and genetic engineering has enabled it to produce novel products, such as wax esters, free fatty acids, and long chain hydrocarbons. Furthermore, we present recent examples of broad feedstock utilization and value-added chemical production by R. opacus , demonstrating its potential as an industrially-relevant strain.

09 BIOMASS FUELS↗
DOE OSTI2021

Chain elongators, friends, and foes

Bioproduction of medium chain carboxylic acids has recently emerged as an alternative strategy to valorize low-value organic waste and side-streams. Key to this route is chain elongation, an anaerobic microbial process driven by ethanol, lactic acid, or carbohydrates. Additionally, because these technologies use wastes as feedstocks, mixed microbial communities are often considered as biocatalysts. Understanding and steering these microbiomes is key to optimize bioprocess performance. From a meta-analysis of publicly available sequencing data, we (i) explore how the current collection of isolated chain elongators compares to microbiome members, (ii) discuss the main beneficial and antagonistic interactions with community partners, and (iii) identify the key research gaps and needs to help understand chain elongation microbiomes, and design/steer these novel bioproduction processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Upstream considerations for gas fermentation processes

Gas fermentation enables the production of fuels, chemicals, and foods from gaseous carbon sources and could serve as a technology for valorizing carbon that may otherwise be emitted to the atmosphere. In this review, we focus on upstream feedstock considerations: the supply of carbon and the supply of electrical power. Electrical power serves a dual role, providing both process energy and biochemical redox potential (via hydrogen or reduced intermediates). We define gas fermentation as bioprocesses involving gaseous feedstocks metabolized by microbes, distinct from microbial electrosynthesis. Trends in CO 2 point sources and low-carbon electricity systems are analyzed, highlighting opportunities and challenges for future deployment. This review synthesizes current knowledge and identifies key R&D priorities for process integration at industrial scale.

09 BIOMASS FUELS↗
DOE OSTI2026

A multiscale packed-bed reactor model for sustainable ethylene production via chemical looping oxidative coupling of methane

The rising global warming concerns and shale gas discovery have prompted research in the direction of greenhouse gas (GHG), such as methane, reduction and conversion. Oxidative coupling of methane (OCM) offers a pathway to low carbon-intense valorization of methane while producing ethylene, a chemical regarded as central to the petrochemical industry. Even after decades of OCM discovery, researchers keep understanding the process and underlying chemical reactions in a pursuit to achieve industrial viability for OCM. Here, in general, OCM suffers from low C 2 selectivity, yield and reactor temperature runaways due to highly exothermic nature of its reactions. Computational Fluid Dynamics (CFD) tools help analyze spatial gradients within the reactor to deeply understand the diffusion of species, mass and heat transfer phenomena. Furthermore, challenges associated with scaling up such as hot spot formation and parametric sensitivity can be addressed without having to expend on costly experiments. The current paper presents a multiscale packed-bed reactor CFD model coupled with a chemical kinetic model for the chemical looping OCM. The CFD model includes two scales i.e., macroscale for catalyst bed and microscale for individual pellets. Moreover, a chemical kinetic model based on 10 gas-phase reactions is integrated with the CFD model. An additional surface reaction for the formation of gas-phase oxygen from catalyst surface is added to account for the absence of feed oxygen. The model is calibrated against experimental results. The calibrated model captures trends in CH 4 conversion, C 2 selectivity and C 2 yield within a ± 4.35 % range across a temperature range of 700-900 °C. Moreover, model fidelity is evaluated by varying key computational parameters such as mesh resolution and time step size. The model is also verified by varying the inlet methane concentration and the gas hourly space velocity (GHSV) and comparing the results with literature. A sensitivity analysis and scale-up of the current model is undergoing.

Chemical looping↗
DOE OSTI2026

Techno-Economic Analysis of Recycling Strategies for Catalyst and Acid During Catalytic Graphitization

With the aim of meeting the urgent demand for active anode materials (AAM) in energy storage systems, bio-based graphite (biographite) emerges as an affordable solution to de-risk the turbulent supply chain of critical minerals. Anode grade biographite requires high crystallinity and purity, which can be achieved by catalytic graphitization with iron, followed by acid washing. Therefore, a well-conceived process integration that recycles catalyst can be the starting point to commercialization. This study evaluates closed-loop catalyst recovery, and byproducts valorization scenarios through a technoeconomic framework to help understand the scale-up potential of biographite. For the acid washing, three reactors in series meet the required biographite purity at 99.95%. Iron and acid recovery can reduce material consumption and waste generation by ~95%, albeit at the expense of ~80% increase in capital costs. Recovery scenarios present similar capital and operational expenses, yielding minimum selling prices (MSP) near $6 kg-1 of biographite. Monte Carlo methodology reveals that feedstock price accounts for ~60% of MSP variance, followed by plant capacity ~20%. The likelihood of reaching a competitive profit margin of 30% in the U.S. AAM market sits at 85% average for recovery scenarios, and 103% when iron oxide is sold as byproduct. Additionally, an IRR >= 15% can be achieved for half of Monte Carlo simulations, representing promising early-stage results. Biographite production offers a strategic pathway to stabilize the anode market beyond China by integrating established technologies for a scalable, economically viable, and sustainable process. The role of catalyst recovery and byproducts utilization is critical for advancing the biomaterials industry.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Separation of life stages within anaerobic fungi (Neocallimastigomycota) highlights differences in global transcription and metabolism

Anaerobic gut fungi of the phylum Neocallimastigomycota are microbes proficient in valorizing low-cost but difficult-to-breakdown lignocellulosic plant biomass. Characterization of different fungal life stages and how they contribute to biomass breakdown are critical for biotechnological applications, yet we lack foundational knowledge about the transcriptional, metabolic, and enzyme secretion behavior of different life stages of anaerobic gut fungi: zoospores, germlings, immature thalli, and mature zoosporangia. A Miracloth-based technique was developed to enrich cell pellets with zoospores - the free-swimming, flagellated, young life stage of anaerobic gut fungi. By contrast, fungal mats contained relatively more vegetative, encysted, mature sporangia that form films. Global gene expression profiles were compared from two sample types (zoospore-enriched cell pellets vs. mature mats) harvested from the anaerobic gut fungal strain Neocallimastix californiae G1. Despite cultures being grown on glucose, the fungal zoospore-enriched samples were transcriptionally primed to encounter plant matter substrate, as evidenced by upregulation of catabolic carbohydrate-active enzymes and putative carbohydrate transporters. Furthermore, we report significant differential gene expression for gene annotation groups, including putative secondary metabolites and transcription factors. Understanding global gene expression differences between the fungal zoospore-enriched cells and mature fungi aid in characterizing fungal development, unmasking gene function, and guiding cultivation conditions and engineering targets to promote enzyme secretion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Ferric chloride aided peracetic acid pretreatment for effective utilization of sugarcane bagasse

The synergetic impacts of ferric chloride aided peracetic acid (FPA) pretreatment were investigated to enhance the total biomass utilization through effective cellulose conversion and high-quality lignin production. The sugarcane bagasse pretreatment with 2% peracetic acid (PAA) and 0.1 mol/L ferric chloride (FeCl 3 ) effectively removed 57.3% of lignin and 72.2% of xylan while preserving ~ 97% of cellulose from sugarcane bagasse under mild temperature (90 °C). The FPA pretreated sugarcane bagasse was effectively hydrolyzed with a glucose yield of 313.0 mg/g-biomass, which was 4.5 times higher than the yield of untreated biomass (69.75 mg/g-biomass) and 1.6 and 3.6 times higher than that of individual PAA and FeCl 3 pretreated sugarcane bagasse, respectively. The regenerated lignin (FPA lignin) showed great potential for further valorization by preserving the major interunit linkage (up to 86% of β-O-4) without significant carbohydrate contamination and lignin condensation due to its mild reaction conditions. In this paper, the combination of PAA and FeCl 3 synergistically enhanced the pretreatment efficiency on sugarcane bagasse and resulted in high fermentable sugar and high-quality lignin production.

09 BIOMASS FUELS↗
DOE OSTI2022

Waste to worth: A high-temperature water-gas shift magnetite catalyst with encapsulated core-shell structure from coal fly ash

In this paper, we demonstrate the synthesis of magnetite-based, encapsulated catalyst with a core-shell structure from coal fly ash, an industrial solid waste, and its application to industrially important high temperature water-gas shift reaction (HT-WGSR). The catalyst precursor was first synthesized through a leaching-precipitation-hydrothermal process, leading to the formation of a nanosheet-like hematite precursor consisting of Fe 3+ as primary element and minor cations including Al 3+ , Mg 2+ and other cations (e.g. Ca 2+ and Ti 4+ ). During the WGSR, the nanosheets broke into smaller particles with a core of magnetite with a diameter of ~20 nm, whereas the inherent impurity elements were activated and migrated to the outer surface forming a shell with a thickness of ~4 nm. Due to the protection of shell, the as-synthesized catalyst exhibited improved activity, thermal stability and long-term durability for HT-WGSR at 400 °C and 450 °C. Compared to the pure hematite, this catalyst exhibited much higher activity and stability, i.e., increased CO conversion and decreased deactivation rate constant, by a factor of four and three, respectively. Additionally, through a bottom-up reverse synthesis, we have confirmed that Al 3+ functioned as a textual promoter enhancing the interfacial area of the catalyst. On the other hand, the presence of minor impurity elements, in particular 2.58 wt% Mg 2+ and 0.18 wt% Ti 4+ , were found to increase the basicity, and promote the adsorption rate of CO, the redox of catalysts, and the alteration of the reaction mechanism from regenerative to associative with the formation of a strong intermediate formate. Finally, this study not only opens a new direction on the valorization of solid waste into high-value catalysts, promoting the sustainability of solid waste management, but also provides an alternative, cost-effective and scalable approach for the design and fine-tuning of encapsulated catalysts.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Borate-assisted alkaline extraction of hemicellulose from switchgrass with enhanced structural stability and purity

Valorization of non-cellulosic polysaccharides is crucial for enhancing the economic competitiveness of biorefinery processes. In this study, a mixture of boric acid and sodium hydroxide was employed to efficiently extract hemicellulose from holocellulose switchgrass. Borate-assisted alkaline extraction resulted in a higher xylan content (59.5 %) compared to conventional alkaline extraction. Here, the hemicellulose fractions derived from the borate-alkaline treatment exhibited a higher molecular weight (M w = 51.2 kDa) and a relatively lower degree of polydispersity (1.28), indicating improved structural stability. The presence of borate had a protective effect against chain scission, preserving glucuronic acid residues and increasing galactose content. Additionally, borate improved hemicellulose purity, with up to 74.1 % of the extracted hemicellulose being suitable for further enzymatic applications. Extended extraction time further enhanced hemicellulose recovery, reaching 97.9 % under NaOH/boric acid conditions while maintaining structural integrity, as confirmed by SEM, FTIR and 2D HSQC NMR analyses. These findings provide insights into the role of borate in optimizing hemicellulose extraction and improving its potential for bioconversion processes.

Borate alkaline↗
DOE OSTI2026

Hydrogen production from full-strength corn stover fermentation effluent in single-chamber replaceable-cathode microbial electrolysis cells

Lignocellulosic residual biomass generated by the agricultural sector is an abundant feedstock for biohydrogen production via dark fermentation. However, this process is intrinsically inefficient, converting only ~30% of the reductant energy into H2 and leaving substantial amounts of reduced byproducts. These byproducts, mostly found in the fermentation effluents, can be further valorized in microbial electrolysis cells (MECs) to enhance the overall H2 recovery. However, current MEC configurations are typically dual- or single-chamber systems, yet both suffer from key inefficiencies. Dual-chamber systems rely on proton exchange membranes that are costly and prone to rapid biofouling, whereas single-chamber, membraneless systems are limited by reduced productivity due to H2 recycling and methanogenic consumption In this study, three single-chamber, 50-mL replaceable-cathode microbial electrolysis cells (RC-MECs) were 3D-printed and equipped with a physical separator to isolate anode and cathode compartments and limit H2 migration. Full-strength milled corn stover (MCS) fermentation effluent (COD of ~23.8 g-COD/L) was treated in fed-batch mode over two operational periods spanning 21 (Run 1) and 80 (Run 2) days. The RC-MECs exhibited comparable performance in both runs: after biofilm maturation, current densities exceeded 100 A/m²_cathode, COD removal reached up to 43%. Notably, extended RC-MECs operation led to a substantial methanogenic activity with the CH4 fraction in the cathode gas increasing to as high as 80% of the total biogas. Additions of a methanogenesis inhibitor 2-bromoethanesulfonate (2-BES) produced transient increases in hydrogen yields (11.51 and 5.12 L-H2/L_reactor/day in Runs 1 and 2, respectively); however, sustained 2-BES addition in subsequent cycles reduced total biogas production, decreased COD removal, and led to volatile fatty acid accumulation. Overall, single-chamber MECs can treat high-strength dark fermentation effluents while improving H2 recovery, but methanogenesis remains a key bottleneck, and complete long-term inhibition may be operationally unsustainable.

Hydrogen Production↗
DOE OSTI2020

Lignin extraction and upgrading using deep eutectic solvents

Deep eutectic solvents (DESs) are a class of green solvents exhibiting low vapor pressure, high thermal stability,low toxicity, and biodegradability. These features make them attractive solvents for lignocellulosic biomassprocessing, especially for lignin valorization. DESs not only solubilize lignin from lignocellulose biomass, butalso confer extracted lignin with properties favorable to its further upgrading. This review summarizes recentadvances in biomass fractionation using DESs for lignin extraction. It also covers lignin upgrading in DESs interms of depolymerization and functionalization. The challenges of tailoring lignin properties by DESs for differentvalorization routes are also discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Natural deep eutectic solvents (NADES) assisted deconstruction of oilcane bagasse for high lipid and sugar recovery

In a novel approach, metabolically engineered sugarcane “Oilcane” has been investigated for fractionation of lipid and cellulose-rich pulp, using certain Natural deep eutectic solvents (NADES). The exploration of eco- friendly solvents are at the forefront of harnessing the biofuel potential of modern bioenergy crops. For this, six combinations of NADES were prepared using choline chloride (ChCl) as HBA and lactic acid (LA), oxalic acid (OA) and glycerol (Gly) as HBD and were further explored for pretreatment of oilcane bagasse in a molar ratio of 1:1 and 1:2. The impact of NADES ratio, biomass loading (10–50%), residence time (1–2 h), and temperature (90–140 °C) were evaluated for delignification, lipid content, sugar release after enzymatic hydrolysis. The finding demonstrated that under the optimal condition of ChCl: LA (1:2 molar ratio), 140 °C with 2 h retention time, the lipid content in the pre-treated substrate was increased to 2.5-fold (~8% w/w) and > 80% glucose yield was achieved after 72 h of hydrolysis of pre-treated bagasse. High solid loading (~50%) during pretreatment resulted in a similar glucose yield. Furthermore, recycling studies demonstrated that nearly 95 to 98% NADES could be recycled after each pretreatment for up to five consecutive cycles without any significant loss in chemical structure as confirmed by 1 H NMR and FT IR. FT IR and XRD analyses of native and pre-treated biomass were performed to visualize the morphological changes during NADES pretreatment and their impact on sugar yield. The findings of the study may be used to establish NADES-based biorefinery for the valorization of lipids, and carbohydrates for fuels and chemicals production.

09 BIOMASS FUELS↗
DOE OSTI2025

Structure-performance relationships in lignin-based transesterification vitrimers: The role of lignin structural features

Lignin has been hailed as an ideal renewable alternative for petrochemical-based prepolymers in material synthesis for a sustainable and circular economy, due to its abundant aromatic network and high carbon content. However, the properties and performance of lignin-derived macromolecules are strongly influenced by the lignin itself. While numerous studies have explored the impact of lignin content on the thermomechanical performance of lignin-based vitrimers, literature on how the inherent structural features of lignin affect these properties is scanty. In this study, hardwood organosolv lignin was fractionated in ethyl acetate, ethanol, and acetone to obtain lignin fractions with varying structural characteristics. These fractions were then modified through carboxylation and crosslinked with epoxidized soybean oil (ESO) at a hydroxyl to epoxy group ratio of 1:1 to produce lignin-based transesterification vitrimers (LVs). The thermal properties (i.e. glass transition temperature and thermal stability), tensile strength, storage modulus, and stress relaxation behavior of the LVs were studied and carefully related to the structural features of lignin. The results revealed a positive relationship between strong hydroxyl content in modified lignin and the tensile strength (5.10–9.71 MPa), storage modulus (1099.4 – 1372.8 MPa), crosslinking density, and stress relaxation of the LVs. Additionally, both the storage modulus and tensile strength exhibited a positive relationship with the ratio of rigid linkages in modified lignin, while lignin molecular weight was found to significantly impact the thermal properties of LVs (i.e Tg and thermal stability). This study not only highlights the valorization of lignin in vitrimer synthesis but also provide insights for designing lignin-based materials with tailored properties for specific applications.

Bio-based polymer↗
DOE OSTI2026

Synergistic effects of chemical-free hydrothermal pretreatment on the recovery of cellulosic sugars and pectin from sugar mill-derived sugar beet pulp

Sugar mills processing sugar beet generate large amounts of sugar beet pulp (SBP), a carbohydrate-rich byproduct composed of 22–30% cellulose, 24–32 % hemicellulose, and 15-20% pectin. Mild, chemical-free hydrothermal pretreatment offers a promising approach to recover these compounds while minimizing pectin degradation, reducing chemical use, and lowering operating costs for value-added applications. This study evaluates the effects of chemical-free hydrothermal pretreatment on cellulosic sugars recovery and its synergy with subsequent pectin extraction under pretreatment conditions ranging from 80°C to 120°C for 15-45 min. Results show that increasing pretreatment severity preserved most glucans with 4% decrease in galacturonan content. Optimal pretreatment (100°C for 45 min) followed by enzymatic hydrolysis achieved the best glucose (95%) and pentose (74%) yields, while galacturonan remained concentrated in the residual solids. Subsequent citric acid extraction at 80°C for 3 hr and a solid-to-liquid ratio of 1:15 yielded up to 85% pectin, significantly lowering water, chemical, and energy requirements compared to conventional industrial extraction. The integration of mild hydrothermal pretreatment with enzymatic hydrolysis thus maximized sugar recovery and enabled efficient downstream pectin extraction without compromising product yields. These findings advance low-impact valorization strategies to reinforce SBP’s values in biorefinery.

09 - BIOMASS FUELS↗
DOE OSTI2025

Co-depolymerization of lignin and plastic waste using hydrothermal liquefaction process

Sustainable valorization of underutilized lignin and plastic waste beyond incineration is critical for producing renewable fuels. Hydrothermal liquefaction (HTL) provides a promising approach to convert wet lignin and plastics into high-quality oils without the need for prior drying of wet lignin. Here, this study examines the effects of temperature (300–400 °C), residence time, and polymer molecular weight on product yield and composition during HTL of polyethylene (PE), polypropylene (PP), and lignin under subcritical and supercritical water conditions. For PE, oil yields increased with temperature, with low molecular weight (LMW) PE achieving a maximum of ∼93 % at 400 °C for 30 min, while high molecular weight (HMW) PE reached ∼86 % at 400 °C for 1 h. Lignin and PP exhibited optimal oil yields at intermediate temperatures, decreasing at higher temperatures due to secondary reactions and char formation. Lignin yielded a maximum of ∼22 % oil at 300 °C for 30 min, LMW PP ∼88 % at 375 °C for 1 h, and HMW PP ∼83 % at 400 °C for 1 h. GC–MS analysis revealed that lignin oils were rich in phenols and alkylphenols, while PE and PP oils were dominated by paraffins and olefins. Oxygenated compounds in PE decreased at higher temperatures, improving oil quality. Co-liquefaction of lignin with plastics enhanced oil yields and energy content under specific conditions, demonstrating synergistic effects dependent on plastic type, molecular weight, and HTL conditions. These findings highlight the potential of HTL to produce high-energy, value-added fuels from lignin–plastic mixtures.

09 - BIOMASS FUELS↗
DOE OSTI2019

A Perspective on Catalysis in Solid Acids

Solid acids are among the most important heterogeneous catalysts, finding many applications ranging from hydrocarbon cracking and alkane isomerization [1] in petroleum refining to valorization of biomass [2]. Even though the subject is quite old, new materials and applications are still being developed. Some of the new applications involve solid Lewis acids, such as metal-substituted, siliceous zeolites (e.g. Sn-BEA [3-5]); but new Brønsted acids [6] and applications for Brønsted acids [7-9] are appearing as well. Although there have been many excellent reviews of solid acidity and methods for characterizing solid acids [10-12], there is still much that we do not know about the nature of acid sites in solids and the factors which are most important for influencing catalytic activity. In this perspective, we will discuss some concepts that we feel are important for understanding these materials and the reactions they catalyze. Because our understanding of Lewis acids is much less advanced, we will restrict our comments to solids with Brønsted acidity and refer the reader to other recent publications on Lewis acids [13-15].

36 MATERIALS SCIENCE↗