Search NASA⌕ Search

SEARCH · Search NASA

Results for “acidic electrolyte”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect and measurement of residual water in CaCl 2 intended for use as electrolyte in molten salt electrochemical processing

We report CaCl 2 has applications for electrochemical processing of nuclear materials. Thermal dehydration leads to formation of oxide ions, which are shown to react and cause precipitation of dissolved CeCl 3 that was selected as a surrogate for actinide chlorides. Thus, measurement of residual water in CaCl 2 is an essential capability. Thermogravimetric analysis (TGA) was shown to underestimate starting water concentration. Subsequent analysis of solid samples via acid–base titration and cyclic voltammetry (CV) of the molten salt yielded consistent values within 5% for residual water. Hydroxides were shown to be unstable, thus oxygen is retained as oxide ions. Thus, total water in a sample of CaCl 2 can be quantified by combining TGA with with either CV of molten salt or titration of salt samples. The importance of quantifying residual water in the salt was demonstrated by showing that cerium chloride (surrogate for actinide chlorides) will react with oxide ions in CaCl 2 to form insoluble oxides and oxychlorides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

p-Block Metal Oxide Noninnocence in the Oxygen Evolution Reaction in Acid: The Case of Bismuth Oxide

The Pourbaix diagrams of p-block Pb, Sb, and Bi establish a robust stability for their oxides in acidic solutions. Such oxides have found utility as stable frameworks to support metals that are active for oxygen evolution reaction (OER) catalysis, but they also possess two-electron redox couples, which can potentially engender OER activity. Thus, the use of p-block oxide supports provides an imperative for understanding the OER activity of the unary oxides. Toward this end, we report BiO x films that are able to perform OER catalysis at moderate overpotentials for extended periods of operation (>110 h) in highly acidic solutions (pH 1.0–2.25) with no sign of decreased OER activity during operation at current densities of 1–5 mA cm –2 . X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and UV-vis spectroelectrochemistry reveal a change in the Bi oxidation state prior to OER catalysis, from predominantly Bi 3+ in the as-deposited films to primarily Bi 5+ in the catalytically active films. Furthermore, this transformation is accompanied by a prominent color change from orange to dark brown. Simulations of the cyclic voltammogram catalytic profiles suggest two OER pathways for BiO x involving Bi IV O x and Bi V O x catalysts with the Bi V O x pathway prevailing after catalyst activation. Together, these results demonstrate the ability of BiO x to facilitate OER in acid with high functional stability and underscore the noninnocent role that p-block metal oxides may play in OER catalysis in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Role of phosphate source in improving the proton conductivity of tin pyrophosphate and its composite electrolytes

Metal pyrophosphates (MPPs) in general, and tin pyrophosphate (TPP) in particular, have received significant interest in the last decade due to their potential as proton conductors for electrolyte application in intermediate temperature (IT)-fuel cells. However, for MPP based electrolytes, despite high reported proton conductivities, achieving good fuel cell performance and high open circuit voltage (OCV) remains a challenge with synthesis methods playing a crucial role in determining the final proton conductivity. Here we report the role of phosphate precursor in determining the TPP proton conductivity by examining five different precursors: (1) phosphoric acid (TPP-PA), (2) ammonium hydroxide + phosphoric acid (TPP-NH 4 OH), (3) diammonium phosphate (TPP-DAP), (4) tetramethylammonium sulphate + phosphoric acid (TPP-TMAP), and (5) tetrabutylammonium phosphate (TPP-TBAP), where a maximum conductivity of 88 mS cm -1 at 200 °C was obtained for TPP prepared from the TBAP precursor. TPP prepared from all of the different precursors formed the crystalline cubic Pa-3 with combining macron] phase after sintering at 650 °C for 2.5 hours. Furthermore, TPP-TBAP/Nafion® composite membranes prepared with a 90 : 10 ratio exhibited an OCV of 0.98 V and produced a maximum peak power density (PPD) of 630 mW cm -2 at an operating temperature of 220 °C. Our results demonstrate the significant impact of the TPP precursor on proton conductivity and fuel cell performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fundamental benchmarking of the discharge properties of negative electrodes in lead acid batteries

The unprecedented scale of energy storage deployment needed to allow high penetration of intermittent renewable energy sources into the electrical grid places significant economic cost and performance targets on battery technologies. Lead batteries, owing to their highly abundant and inexpensive raw materials, can be considered an important solution to grid storage as long as they achieve high material utilization, fast recharge rates, and long cycle life. To address the limitations in material utilization, we need to revisit the electrochemical processes during the discharge step and answer the following question: what are the fundamental limits of the discharge reaction? In this work we discuss how well-defined lead metal surfaces with nanometer scale roughness allow us to resolve the accessible discharge capacity for both faradaic and non-faradaic processes as a function of electrolyte concentration and in the presence of traditional additives. The direct connection between PbSO 4 layer morphology and discharge rates gives us important insights on the mechanism of discharge as related to the dissolution and passivation events. In conclusion, this work sets the stage for reimagining the design of lead batteries with implications to grid storage applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Fe–N–C Boosts the Stability of Supported Platinum Nanoparticles for Fuel Cells

The poor durability of Pt-based nanoparticles dispersed on carbon black is the challenge for the application of long-life polymer electrolyte fuel cells. Recent work suggests that Fe- and N-codoped carbon (Fe-N-C) might be a better support than conventional high-surface-area carbon. In this work, we find that the electrochemical surface area retention of Pt/Fe-N-C is much better than that of commercial Pt/C during potential cycling in both acidic and basic media. In situ inductively coupled plasma mass spectrometry studies indicate that the Pt dissolution rate of Pt/Fe-N-C is 3 times smaller than that of Pt/C during cycling. Density functional theory calculations further illustrate that the Fe-N-C substrate can provide strong and stable support to the Pt nanoparticles and alleviate the oxide formation by adjusting the electronic structure. The strong metal-substrate interaction, together with a lower metal dissolution rate and highly stable support, may be the reason for the significantly enhanced stability of Pt/Fe-N-C. In conclusion, this finding highlights the importance of carbon support selection to achieve a more durable Pt-based electrocatalyst for fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2021

Computational Fluid Dynamic Simulation for Electrolyte Flow in Horizontal EP of Nb SRF Elliptical Cavities

An electrolyte flow velocity on an electropolishingsurface affects a material removal rate where higherremoval is observed with a higher velocity of theelectrolyte. In horizontal EP (HEP) of an ellipticalcavity, an electrolyte flow near the equator positionmight remain slow and responsible for a lowerremoval compared to that on the iris and beam pipepositions. In order to understand the flow dynamicon an elliptical cavity surface in the horizontal EPprocess, a computational fluid dynamic simulationwas conducted. This study was conducted on 1.3GHz cavity with different cathodes and acid flowrates. Final aim of the study is to improve the flowuniformity to attain uniform removal especially inmulticell cavities.

Chouhan, V.↗
DOE OSTI2025

Enabling Solar Water Oxidation by BiVO 4 in Strongly Acidic Solutions

The oxygen evolution reaction (OER) is paired with various electrochemical and photoelectrochemical reduction reactions used for fuel and chemical production. As there is a strong interest in performing many of these reduction reactions in strongly acidic solutions to increase the reaction rate, efficiency, or selectivity, there is also a great interest in enabling efficient and stable OER in strongly acidic solutions. In this study, we report stable photoelectrochemical OER (POER) of a BiVO 4 photoanode in 0.1 M HNO 3 (pH 1). This was achieved by using Nb 2 O 5 as a protection layer. While Nb 2 O 5 was rarely used as a protection layer for photoelectrodes in the past, we show its excellent capability to suppress both the chemical and photoelectrochemical dissolution of BiVO 4 at pH 1. After stabilizing BiVO 4 with a Nb 2 O 5 protection layer, we added Co 2+ ions to the electrolyte as an OER catalyst to enhance the POER. We found that Co (aq) 2+ can serve as a homogeneous OER catalyst without being deposited as a CoO x solid catalyst on Nb 2 O 5 . When we performed the POER using unprotected BiVO 4 with Co (aq) 2+ under the same condition, although POER was enhanced, the enhancement could not be sustained due to the chemical dissolution of BiVO 4 . After the POER, we found that a Co 3+ -containing OER catalyst was deposited on the bare BiVO 4 surface. This result suggested that the use of Co 2+ ions as a homogeneous catalyst was possible due to the inertness of the Nb 2 O 5 surface toward the adsorption or deposition of Co ions. This study enabling stable POER of BiVO 4 in 0.1 M HNO 3 using the combination of a Nb 2 O 5 protection layer and Co (aq) 2+ as a homogeneous OER catalyst provides promising possibilities for acidic POER and OER.

Catalysts↗
DOE OSTI2022

Stability and Activity of Cobalt Antimonate for Oxygen Reduction in Strong Acid

Guided by computational Pourbaix screening and high-throughput experiments aimed at the development of precious-metal-free fuel cells, we investigate rutile CoSb 2 O 6 as an electrocatalyst for oxygen reduction in 1 M sulfuric acid. Following 4 h of catalyst conditioning at 0.7 V vs RHE, operation at this potential for 20 h yielded an average current density of –0.17 mA cm –2 with corrosion at a rate of 0.04 nm hour –1 that is stoichiometric with catalyst composition. Surface Pourbaix analysis of the (111) surface identified partial H coverage under operating conditions. The Sb active site has an HO* binding free energy of 0.49 eV, which is near the peak of the kinetic 4e – ORR volcano for transition-metal oxides in acidic conditions. Furthermore, the experimental demonstration of operational stability and computational identification of a reaction pathway with favorable energetics place rutile CoSb 2 O 6 among the most promising precious-metal-free electrocatalysts for oxygen reduction in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Screening aqueous organic redox couples for spontaneous hydrogen generation on catalysts

Two low-cost redox couples with near neutral or alkaline pH - 7,8-dihydroxyphenazine-2-sulfonic acid (DHPS) and chrome chelated ethylenediaminetetraacetic acid (Cr-EDTA) with ammonia – are identified to generate hydrogen evolution spontaneously on Pt/C catalysts. Cr-EDTA redox couple has two times higher hydrogen evolution rate than that of DHPS, and the charged Cr-EDTA molecules are fully utilized to generate hydrogen gas, while ~ 50% of DHPS molecules are utilized to produce hydrogen spontaneously on Pt/C catalysts. The Cr-EDTA electrolyte enables cost reduction by allowing cheap raw material of Cr and corrosion resistant alloy instead of costly superalloy for catalytic reactor systems. Furthermore, the Cr-EDTA with ammonia as a negolyte for flow batteries was validated to suppress hydrogen evolution side reaction, reach 99% of coulombic efficiency in flow cell operation paired with Fe(CN)6 redox couple near neutral pH.

08 HYDROGEN↗
DOE OSTI2023

Enhancing durability of polymer electrolyte membrane using cation size selective agents

Radical species generated during proton exchange membrane fuel cell operation considerably limit the achievable durability, particularly for heavy-duty vehicle applications. A promising solution to the problem is the incorporation of radical scavenger additives such as cerium which mitigates chemical attacks on the membrane. However, these additives migrate during fuel cell operation causing a loss in durability and performance due to detrimental interaction with various components of the fuel cell. Here, we study cation size selective agents as a means to immobilize cerium within perfluorosulfonic acid (PFSA) membranes. We synthesized an organometallic complex of cerium with 15-Crown-5 and investigated the effectiveness of this complex to immobilize cerium. Over 300% increase in cerium retention and an 80% increase in chemical durability were observed owing to the stabilization effect of crown ethers on cerium. Migration under a potential gradient can be eliminated while the complex also contributes to the enhancement in cerium radical scavenging activity. In conclusion, current challenges with the proposed solution are highlighted and future work is discussed.

25 ENERGY STORAGE↗
DOE OSTI2022

Elementally Resolved Dissolution Kinetics of a Ni-Fe-Cr-Mn-Co Multi-Principal Element Alloy in Sulfuric Acid Using AESEC-EIS

Atomic emission spectroelectrochemistry (AESEC) combined with linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) provided insights on both active and passive dissolution of Ni-Fe-Cr-Mn-Co multi-principal element alloy. Elemental dissolution rates measured by AESEC during open circuit experiment were in agreement with those extrapolated from AESEC-LSV and indicated element-specific dissolution tendencies. AESEC-EIS at open circuit potential showed nearly in-phase elemental dissolution during potential modulation which suggests direct dissolution from the alloy surface to the electrolyte. In the passive potential domain, no oscillation of the elemental dissolution rate was detected by AESEC-EIS, suggesting non-oxidative chemical dissolution of the outer layer of the passive film. In this case, dissolution at the passive film/electrolyte interface was equal to the metal oxidation rate (passive current density) at the metal/passive film interface and the passive current density was independent of potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Few-Atom Copper Catalyst for the Electrochemical Reduction of CO to Acetate: Synergetic Catalysis between Neighboring Cu Atoms

Single-atom catalysts (SACs) are gaining increasing recognition because of their superior catalytic properties for various reactions. However, the performance of SACs is often limited by the lack of neighboring metal centers to cooperate in catalysis. Herein, a synergetic interaction between neighboring Cu atoms of a few-atom catalyst (FAC) on graphdiyne is found to greatly enhance the production of acetate in CO electroreduction reaction relative to Cu SACs. In a 1.0 M KOH electrolyte, this Cu FAC exhibits an acetate Faradaic efficiency of 53.8±1.5 % and an ultrahigh relative purity of up to 97 wt% for liquid products, and excellent stability of over 23 h continuous electrolysis at -0.8 V versus reversible hydrogen electrode (RHE). Theoretical studies suggest that the intersite catalytic communication between two neighboring metal atoms confined in each pore of GDY facilitates the formation of acetic acid through either stepwise hydrogenation of CH 2 CO* or the direct reaction of H 2 O with CH 2 CO*. Our study demonstrates the unprecedented synergetic catalysis of Cu FAC in promoting the selective CO electroreduction toward acetate production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring the Structure–Function Relationship in Iridium–Cobalt Oxide Catalyst for Oxygen Evolution Reaction across Different Electrolyte Media

Renewable hydrogen generation from water electrolysis offers a viable path to decarbonization if the costs can be reduced. The iridium-based anode catalyst is one of the most expensive components in electrolyzers. We propose reducing iridium usage by substituting Ir with Co, a more affordable metal, in the mixed oxide phase to enhance the catalytic activity while minimizing Ir consumption. A modified surfactant-assisted Adams fusion synthesis technique was developed as a scalable method for producing IrCo oxide nanoparticles. The synthesized material outperforms the commercial baseline, iridium oxide with carbon (IrOx_C), in both acidic and alkaline media. Acid etching (IrCo_ae) further enhances activity by selectively removing Co to expose more active sites. IrCo_ae achieved a significantly lower overpotential at 10 mA/cm 2 compared to IrOx_C, with reductions of approximately 18% under acidic conditions and 14% under alkaline conditions. This work demonstrates that the proposed synthesis method enables efficient Ir utilization and can be adapted to enhance catalyst stability for renewable hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Aryl ether-free polymer electrolytes for electrochemical and energy devices

Anion exchange polymers (AEPs) play a crucial role in green hydrogen production through anion exchange membrane water electrolysis. The chemical stability of AEPs is paramount for stable system operation in electrolysers and other electrochemical devices. Given the instability of aryl ethercontaining AEPs under high pH conditions, recent research has focused on quaternized aryl ether-free variants. The primary goal of this review is to provide a greater depth of knowledge on the synthesis of aryl ether-free AEPs targeted for electrochemical devices. Synthetic pathways that yield polyaromatic AEPs include acid-catalysed polyhydroxyalkylation, metal-promoted coupling reactions, ionene synthesis via nucleophilic substitution, alkylation of polybenzimidazole, and Diels–Alder polymerization. Polyolefinic AEPs are prepared through addition polymerization, ring-opening metathesis, radiation grafting reactions, and anionic polymerization. Discussions cover structure–property–performance relationships of AEPs in fuel cells, redox flow batteries, and water and CO 2 electrolysers, along with the current status of scale-up synthesis and commercialization.

25 ENERGY STORAGE↗
DOE OSTI2023

2022 American Conference on Neutron Scattering (ACNS 2022)

The 11th American Conference on Neutron Scattering (ACNS 2022) will be held on June 5-9, 2022, in Boulder, CO. The Conference will provide essential information on the breadth and depth of current neutron-related research worldwide. Hosted by the Neutron Scattering Society of America, this year’s Conference will feature a combination of invited and contributed talks, poster sessions, and tutorials. Topics of the conference are: Advances in Neutron Facilities, Instrumentation and Software: Developments in sources, instrumentation, sample environments and control software. Hard Condensed Matter: Magnetism, correlated metals, quantum/topological materials, superconductors, ferroelectrics, multiferroics, glasses, and disorder phenomena. Submissions outlining examples of neutron scattering in industrial and engineering applications involving hard condensed matter systems are also encouraged. Soft Matter: Neutron studies of soft materials and related fields including in situ and in operando studies. Polymers, surfactants, emulsions, gels, nanoparticles, colloidal suspensions and more. Submissions of computational studies or applications of machine learning beneficial to neutron scattering experiments, as well as examples of neutron scattering in industrial and engineering applications are strongly encouraged. Biology, Biophysics and Biotechnology: Neutron studies of biological and biologically relevant systems. Proteins, bio membranes, biological assemblies, natural materials, nucleic acids, drug-delivery platforms and biomedical systems. Submissions of computational studies or applications of machine learning beneficial to biological neutron scattering experiments, as well as examples of neutron scattering in applied research involving biological systems, are strongly encouraged. Materials Chemistry and Energy: Neutron-based studies of functional materials and materials for energy applications. Examples include porous materials such as metal organic frameworks (MOFs), zeolites; phosphors; novel pigments; electrolytes; catalysts; ionic conductors/cathode materials; photovoltaic materials (hybrid perovskites); thermoelectrics; magnetocalorics/electrocalorics. Structural Materials and Engineering: Neutron scattering studies of materials and engineering processes including structural materials, concrete and metals, as well as engineering processes including combustion, corrosion, additive manufacturing, and others. Neutron Physics: Fundamental physical studies of the neutron and related areas. Emerging Applications in Neutron Scattering: Machine Learning and Data Science: Advances in computing power have contributed to rapidly evolving machine learning and data science fields that can be leveraged to the benefit of the neutron scattering community. The purpose of this session is to highlight recent advances in machine learning and data science and to serve as the foundation of a parallel data and computation track highlighting computation advances and applications in neutron scattering throughout the conference.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine learning-accelerated path integral molecular dynamics simulations of reactive organic electrolytes

Hydrogen bonded electrolytes that exhibit accelerated proton transport via sequential reactive hops have drawn interest for their promise in clean energy applications. Molecular dynamics simulations of these electrolytes offer the opportunity to uncover microscopic mechanistic details that could be used to design and tune the properties of candidate electrolyte technologies. However, accurately modeling the proton transfer reactions and transport properties that give rise to high charge conductivites in these electrolytes proves computationally challenging because of the need to perform lengthy condensed phase simulations, treating both the electronic and nuclear degrees of freedom quantum mechanically. In this paper, we demonstrate that such a modeling task can be efficiently achieved with the use of density functional theory (DFT)-trained machine learning potentials (MLP) to accelerate path integral molecular dynamics (PIMD) simulations. We highlight the practical utility of this approach by using it to benchmark how closely PIMD simulations employing different DFT exchange–correlation functionals reproduce the composition-dependent densities, diffusion coefficients, and electrical conductivities of mixtures consisting of imidazole and levulinic acid. Even with the speedup afforded by our MLPs, PIMD simulations remain quite expensive. Furthermore, in order to render PIMD more computationally tractable, we introduce and benchmark the accuracy of a ring polymer contraction approach that leverages a computationally efficient short-range MLP to accelerate our PIMD simulations by an additional factor of four.

Chemical bonding↗
DOE OSTI2024

Breakthrough Conductivity Enhancement in Deep Eutectic Solvents via Grotthuss–Type Proton Transport

There is an increasing demand for the development of ion-conducting electrolytes for energy storage systems. Much attention is directed toward deep eutectic solvents as potential candidates. In the search for highly conductive systems, the possibility of designing deep eutectic solvents with Grotthuss-type proton transport is widely overlooked. Herein, ethaline, a mixture of choline chloride and ethylene glycol is used in a 1:2 molar ratio, to induce a significant conductivity increase with the addition of water and sulfuric acid (H 2 SO 4 ). The achieved breakthrough conductivity is analyzed experimentally and simulated with ab initio molecular dynamics (AIMD). At sufficient water content, an H-bonding network is formed that leads to a significant breakthrough conductivity based on H 2 SO 4 -derived proton transfer following the long-established Grotthuss proton transport mechanism. This result is substantiated by the positive deviation from the ideal KCl line in the Walden plot. Specifically, the data series positioned above the reference line indicates a Grotthuss mechanism in action. The AIMD simulations demonstrate proton transfer between water and ethylene glycol, supported by simulation frames captured at various times.

36 MATERIALS SCIENCE↗