SEARCH · Search NASA

Results for “aerosol retrieval algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Spaceborne Lidar Retrievals of PM2.5 for Air Quality Studies and Applications

Fine particulate matter (PM2.5) substantially contributes to air pollution and negatively affects human health. While many studies have investigated the use of passive column-integrated aerosol optical depth to infer surface PM2.5, the use of lidar observations for air quality characterization is not nearly as extensive. Lidar measurements are critical, however, due to the vertical aerosol information they provide, including near the surface. In this presentation, we first provide an overview of various lidar-based approaches for estimating PM2.5 concentrations and then discuss how lidar measurements can assist other air quality applications. For example, estimates of PM2.5 have been obtained in a physics-based approach through CALIOP near-surface aerosol extinction retrievals, assumptions on the mass extinction efficiency, and incorporating other parameters (an aerosol hygroscopic growth factor and PM2.5/PM10 ratio). Application of this algorithm over the contiguous United States (CONUS) from 2006 to 2018 yielded larger PM2.5 values over the eastern and western CONUS (~10-15 μg/m³) and lower PM2.5 levels in the central CONUS (~5 μg/m³). These spatial patterns were similar to those from gridded PM2.5 concentrations obtained through in situ measurements at ground stations operated by the US Environmental Protection Agency. In another approach, the Cloud Aerosol Transport System (CATS) lidar was used with the Goddard Earth Observing System (GEOS) model in a 1D ensemble-based variational technique to obtain PM2.5 over the US and Europe, and the spatial patterns of the CATS/GEOS based PM2.5 concentrations generally captured those from surface stations (with corresponding hourly EPA PM2.5 vs CATS PM2.5 statistics of R=0.4 and bias=1.5 μg/m³). In our recent work, as part of the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group, we have applied both the CALIOP and CATS/GEOS based approaches over the highly polluted country of India during the post-monsoon season (September-October 2016). We derived elevated levels of two-month mean PM2.5 (~100 μg/m³) in northern India, especially near New Delhi. These high PM2.5 concentrations in the Indo-Gangetic plain are driven in large part from the seasonal burning of crop residue and meteorological conditions typical at this time of the year, such as low wind speeds and a shallow boundary layer. While the satellite-derived PM2.5 moderately replicates (R = ~0.7-0.9) the spatial variability in the two-month mean of surface in situ PM2.5 from monitoring sites operated by the Central and State Pollution Control Boards, we show results from specific scenes for which there are large deviations between the satellite-derived PM2.5 and in situ measurements. Other current work on this topic focuses on developing PM2.5 estimates using airborne high spectral resolution lidar measurements through machine learning regression algorithms and involves several parameters (e.g., aerosol extinction, color ratio, lidar ratio). Application of this method over major metropolitan areas in the US and Asia have resulted in high correlations (R = 0.93) with surface measurements. This airborne lidar approach can be adapted to spaceborne lidar measurements, and all three of these approaches can be applied to ESA’s EarthCARE Atmospheric Lidar instrument, setting the stage for the future Cloud Aerosol Lidar for Global Scale Observations of the Ocean-Land Atmosphere System (CALIGOLA) mission. Ultimately, beyond estimates of PM2.5, the aerosol vertical distribution from lidars can benefit studies involving passive sensor approaches for PM2.5 proxies (including from geostationary satellites), wildfire smoke plume injection heights, volcanic emissions (e.g., ash height retrievals), and aerosol/air quality model assimilation, evaluation, and forecasts.

Travis D Toth↗

NASA NTRS2002

SAGE (version 5.96) Ozone Trends in the Lower Stratosphere

Ozone retrievals from Stratospheric Aerosol and Gas Experiment (SAGE) II version 5.96 (v5.96) below approx. 25 km altitude are discussed. This version of the algorithm includes improved constraints on the wavelength dependence of aerosol extinctions based on the ensemble of aerosol size distribution measurements. This results in a reduction of SAGE ozone errors in the 2 years after the Mount Pinatubo eruption. However, SAGE ozone concentrations are still approx. 10% larger than ozonesonde and Halogen Occultation Experiment (HALOE) measurements below 20 km altitude under nonvolcanic conditions (and by more than this in the tropics). The analysis by Steele and Turco suggests that the SAGE ozone overpredictions are in the wrong direction to be explained by aerosol extinction extrapolation errors. Moreover, preliminary SAGE 11 v6.0a retrievals suggest that they are partially accounted for by geometric difficulties at low altitudes in v5.96 and prior retrievals. SAGE ozone trends for the 1979-1996 and 1984-1996 periods are calculated and compared, and the sources of trend errors are discussed. These calculations are made after filtering out ozone data during periods of high, local aerosol extinctions. In the lower stratosphere, below approx. 28 km altitude, there is shown to be excellent agreement in the altitudinal structure of ozone decreases at 45 deg N between SAGE and ozonesondes with the largest decrease in both between 1979 and 1996 having occurred below 20 km altitude, amounting to 0.9 +/- 0.7% yr (2sigma) at 16 km altitude. However, in contrast to the fairly steady decreases at 45 deg N, both SAGE measurements and Lauder ozonesondes show ozone increases at 45 deg S over the period from the mid-1980s to 1996 of 0.2 +/- 0.5%/yr (2sigma) from 15 to 20 km altitude. The SAGE data suggest that this increase is a wintertime phenomenon which occurs in the 15-20 km height range. Changes in dynamics are suggested as the most likely cause of this increase. These hemispheric differences in ozone trends are supported by ozone column measurements by the Total Ozone Mapping Spectrometer (TOMS).

Cunnold, D. M.↗

DOE OSTI2024

Statistically Resolved Planetary Boundary Layer Height Diurnal Variability Using Spaceborne Lidar Data

The Planetary Boundary Layer Height (PBLH) significantly impacts weather, climate, and air quality. Understanding the global diurnal variation of the PBLH is particularly challenging due to the necessity of extensive observations and suitable retrieval algorithms that can adapt to diverse thermodynamic and dynamic conditions. This study utilized data from the Cloud-Aerosol Transport System (CATS) to analyze the diurnal variation of PBLH in both continental and marine regions. By leveraging CATS data and a modified version of the Different Thermo-Dynamics Stability (DTDS) algorithm, along with machine learning denoising, the study determined the diurnal variation of the PBLH in continental mid-latitude and marine regions. The CATS DTDS-PBLH closely matches ground-based lidar and radiosonde measurements at the continental sites, with correlation coefficients above 0.6 and well-aligned diurnal variability, although slightly overestimated at nighttime. In contrast, PBLH at the marine site was consistently overestimated due to the viewing geometry of CATS and complex cloud structures. The study emphasizes the importance of integrating meteorological data with lidar signals for accurate and robust PBLH estimations, which are essential for effective boundary layer assessment from satellite observations.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2018

Satellite-Based View of the Aerosol Spatial and Temporal Variability in the Cordoba Region (Argentina) Using over Ten Years of High-Resolution Data

Space-based observations offer a unique opportunity to investigate the atmosphere and its changes over decadal time scales, particularly in regions lacking in situ and/or ground based observations. In this study, we investigate temporal and spatial variability of atmospheric particulate matter (aerosol) over the urban area of Córdoba (central Argentina) using over ten years (2003–2015) of high-resolution (1 km) satellite-based retrievals of aerosol optical depth (AOD). This fine resolution is achieved exploiting the capabilities of a recently developed inversion algorithm (Multiangle implementation of atmospheric correction, MAIAC) applied to the MODIS sensor datasets of the NASA-Terra and -Aqua platforms. Results of this investigation show a clear seasonality of AOD over the investigated area. This is found to be shaped by an intricate superposition of aerosol sources, acting over different spatial scales and affecting the region with different yearly cycles. During late winter and spring (August-October), local as well as near- and long-range transported biomass burning (BB) aerosols enhance the Córdoba aerosol load, and AOD levels reach their maximum values (>0.35 at 0.47 µm). The fine AOD spatial resolution allowed to disclose that, in this period, AOD maxima are found in the rural/agricultural area around the city, reaching up to the city boundaries pinpointing that fires of local and near-range origin play a major role in the AOD enhancement. A reverse spatial AOD gradient is found from December to March, the urban area showing AODs 40–80% higher than in the city surroundings. In fact, during summer, the columnar aerosol load over the Córdoba region is dominated by local (urban and industrial) sources, likely coupled to secondary processes driven by enhanced radiation and mixing effects within a deeper planetary boundary layer (PBL). With the support of modelled AOD data from the Modern-Era Retrospective Analysis for Research and Application (MERRA), we further investigated into the chemical nature of AOD. The results suggest that mineral dust is also an important aerosol component in Córdoba, with maximum impact from November to February. The use of a long-term dataset finally allowed a preliminary assessment of AOD trends over the Córdoba region. For those months in which local sources and secondary processes were found to dominate the AOD (December to March), we found a positive AOD trend in the Córdoba outskirts, mainly in the areas with maximum urbanization/population growth over the investigated decade. Conversely, a negative AOD trend (up to −0.1 per decade) is observed all over the rural area of Córdoba during the BB season, this being attributed to a decrease of fires both at the local and the continental scale.

aerosols↗

NASA NTRS2020

Applying Orbital Multi-Angle Photopolarimetric Observations to Study Properties of Aerosols in the Earth's Atmosphere: Implications of Measurements in the 1.378 µm Spectral Channel to Retrieve Microphysical Characteristics and Composition of Stratospheric Aerosols

We analyze the possibilities of orbital photopolarimetric measurements to study properties of aerosols in the Earth's atmosphere. As an example, we consider the case when such measurements are performed within a narrow spectral channel centered at 1.378 µm that allows to retrieve microphysical characteristics of stratospheric aerosols separately from those of tropospheric aerosols. We consider the case of stratospheric aerosols caused by volcanic eruption, and adopt the model of the stratosphere in the form of a homogeneous plane-parallel layer composed of polydisperse spherical particles. We use numerically exact solutions of the vector radiative transfer equation to theoretically simulate measurements carried out at various numbers of scattering angles, including: (i) radiance measurements alone; (ii) polarization measurements alone; and (iii) radiance and polarization measurements together. The results of computations show that the simultaneous use of radiance and polarization measurements at a sufficiently large number of scattering angles enables one to retrieve the optical thickness, effective radius, and refractive index of aerosols with adequate accuracy. We demonstrate how the accuracy of the derived values of the optical parameters of aerosols depends on the accuracy of measurements of the intensity and polarization of the reflected light, optical thickness of aerosol layer itself, effective radius of aerosols, width of the particle size distribution, and number of viewing angles.

Aerosols↗

NASA NTRS2018

CALIPSO Lidar Level 3 Aerosol Profile Product: Version 3 Algorithm Design

The CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) level 3 aerosol profile product reports globally gridded, quality-screened, monthly mean aerosol extinction profiles retrieved by CALIOP (the Cloud-Aerosol Lidar with Orthogonal Polarization). This paper describes the quality screening and averaging methods used to generate the version 3 product. The fundamental input data are CALIOP level 2 aerosol extinction profiles and layer classification information (aerosol, cloud, and clear-air). Prior to aggregation, the extinction profiles are quality-screened by a series of filters to reduce the impact of layer detection errors, layer classification errors, extinction retrieval errors, and biases due to an intermittent signal anomaly at the surface. The relative influence of these filters are compared in terms of sample rejection frequency, mean extinction, and mean aerosol optical depth (AOD). The “extinction QC flag” filter is the most influential in preventing high-biases in level 3 mean extinction, while the “misclassified cirrus fringe” filter is most aggressive at rejecting cirrus misclassified as aerosol. The impact of quality screening on monthly mean aerosol extinction is investigated globally and regionally. After applying quality filters, the level 3 algorithm calculates monthly mean AOD by vertically integrating the monthly mean quality-screened aerosol extinction profile. Calculating monthly mean AOD by integrating the monthly mean extinction profile prevents a low bias that would result from alternately integrating the set of extinction profiles first and then averaging the resultant AOD values together. Ultimately, the quality filters reduce level 3 mean AOD by −24 and −31 % for global ocean and global land, respectively, indicating the importance of quality screening.

Tackett, Jason L.↗

NASA NTRS2010

Ten Years of Cloud Optical and Microphysical Retrievals from MODIS

The MODIS cloud optical properties algorithm (MOD06/MYD06 for Terra and Aqua MODIS, respectively) has undergone extensive improvements and enhancements since the launch of Terra. These changes have included: improvements in the cloud thermodynamic phase algorithm; substantial changes in the ice cloud light scattering look up tables (LUTs); a clear-sky restoral algorithm for flagging heavy aerosol and sunglint; greatly improved spectral surface albedo maps, including the spectral albedo of snow by ecosystem; inclusion of pixel-level uncertainty estimates for cloud optical thickness, effective radius, and water path derived for three error sources that includes the sensitivity of the retrievals to solar and viewing geometries. To improve overall retrieval quality, we have also implemented cloud edge removal and partly cloudy detection (using MOD35 cloud mask 250m tests), added a supplementary cloud optical thickness and effective radius algorithm over snow and sea ice surfaces and over the ocean, which enables comparison with the "standard" 2.1 11m effective radius retrieval, and added a multi-layer cloud detection algorithm. We will discuss the status of the MOD06 algorithm and show examples of pixellevel (Level-2) cloud retrievals for selected data granules, as well as gridded (Level-3) statistics, notably monthly means and histograms (lD and 2D, with the latter giving correlations between cloud optical thickness and effective radius, and other cloud product pairs).

Platnick, Steven↗

NASA NTRS2022

Inferring iron-oxide species content in atmospheric mineral dust from DSCOVR EPIC observations

The iron-oxide content of dust in the atmosphere and most notably its apportionment between hematite (α-Fe2O3) and goethite (α-FeOOH) are key determinants in quantifying dust’s light absorption, its top of atmosphere UV radiances used for dust monitoring, and ultimately shortwave dust direct radiative effects (DRE). Hematite and goethite column mass concentrations and iron-oxide mass fractions of total dust mass concentration were retrieved from the DeepSpace Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) measurements in the ultraviolet–visible (UV–Vis) channels. The retrievals were performed for dust-identified aerosol plumes over land using aerosol optical depth (AOD) and spectral imaginary refractive index provided by the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm over six continental regions (North America, North Africa, West Asia, Central Asia, EastAsia, and Australia). The dust particles are represented as an internal mixture of non-absorbing host and absorbing hematite and goethite. We use the Maxwell–Garnett effective medium approximation with carefully selected complex refractive indices of hematite and goethite that produce mass fractions of iron oxides species consistent with in situ values found in the literature to derive the hematite and goethite volumetric/mass concentrations from MAIAC EPIC products. We compared the retrieved hematite and goethite concentrations with in situ dust aerosol mineralogical content measurements, as well as with published data. Our data display variations within the published range of hematite, goethite, and iron-oxide mass fractions for pure mineral dust cases. A specific analysis is presented for 15 sites over the main dust source regions. Sites in the central Sahara, Sahel, and Middle East exhibit a greater temporal variability of iron oxides relative to other sites. Niger site(13.52°N, 2.63°E) is dominated by goethite over Harmattan season with median of ~2 weight percentage (wt.%) of iron-oxide. Saudi Arabia site (27.49°N, 41.98°E) over Middle East also exhibited surge of goethite content with the beginning of Shamal season. The Sahel dust is richer in iron-oxide than Saharan and northern China dust except in Summer. The Bodélé Depression area shows a distinctively lower iron-oxide concentration (~1 wt.%) throughout the year. Finally, we show that EPIC data allow to constrain the hematite refractive index. Specifically, we select 5 out of 13 different number of hematite refractive indices widely variable in published laboratory studies by constraining the iron-oxide mass ratio to the known measured values. Provided climatology of hematite and goethite mass fractions across main dust regions of the Earth will be useful for dust shortwave DRE studies and climate modeling.

Sujung Go↗

NASA NTRS2001

Retrieval of Polar Stratospheric Cloud Microphysical Properties from Lidar Measurements: Dependence on Particle Shape Assumptions

A retrieval algorithm has been developed for the microphysical analysis of polar stratospheric cloud (PSC) optical data obtained using lidar instrumentation. The parameterization scheme of the PSC microphysical properties allows for coexistence of up to three different particle types with size-dependent shapes. The finite difference time domain (FDTD) method has been used to calculate optical properties of particles with maximum dimensions equal to or less than 2 mu m and with shapes that can be considered more representative of PSCs on the scale of individual crystals than the commonly assumed spheroids. Specifically. these are irregular and hexagonal crystals. Selection of the optical parameters that are input to the inversion algorithm is based on a potential data set such as that gathered by two of the lidars on board the NASA DC-8 during the Stratospheric Aerosol and Gas Experiment 0 p (SAGE) Ozone Loss Validation experiment (SOLVE) campaign in winter 1999/2000: the Airborne Raman Ozone and Temperature Lidar (AROTEL) and the NASA Langley Differential Absorption Lidar (DIAL). The 0 microphysical retrieval algorithm has been applied to study how particle shape assumptions affect the inversion of lidar data measured in leewave PSCs. The model simulations show that under the assumption of spheroidal particle shapes, PSC surface and volume density are systematically smaller than the FDTD-based values by, respectively, approximately 10-30% and approximately 5-23%.

Reichardt, J.↗

NASA NTRS2014

On the Stratospheric Aerosol and Gas Experiment III on the International Space Station

The Stratospheric Aerosol and Gas Experiment III on International Space Station (SAGE3/ISS) is anticipated to be delivered to Cape Canaveral in the spring of 2015. This is the fourth generation, fifth instrument, of visible/near-IR solar occultation instruments operated by the National Aeronautics and Space Agency (NASA) to investigate the Earth's upper atmosphere. The instrument is a moderate resolution spectrometer covering wavelengths from 290 nm to 1550 nm. The nominal science products include vertical profiles of trace gases, such as ozone, nitrogen dioxide and water vapor, along with multi-wavelength aerosol extinction. The SAGE3/ISS validation program will be based upon internal consistency of the measurements, detailed analysis of the retrieval algorithm, and comparisons with independent correlative measurements. The Instrument Payload (IP), mission architecture, and major challenges are also discussed.

Hernandez, Gloria↗

NASA NTRS2016

An Evaluation of MODIS-Retrieved Aerosol Optical Depth over a Mountainous AERONET Site in the Southeastern US

The literature shows that aerosol optical depth (AOD) derived from the MODIS Collection 5 (C5) dark target algorithm has been extensively validated by spatiotemporal collocation with AERONET sites on both global and regional scales.Although generally comparing well over the eastern US region, poor performance over mountains in other regions indicate the need to evaluate the MODIS product over a mountain site. This study compares MODIS C5 AOD at 550nm to AOD measured at the Appalachian State University AERONET site in Boone, NC over 30 months between August 2010 and September 2013. For the combined Aqua and Terra datasets, although more than 70% of the 500 MODIS AOD measurements agree with collocated AERONET AOD to within error envelope of +/- (0.05 + 15%), MODIS tends to have a low bias (0.02-0.03). The agreement between MODIS and AERONET AOD does not depend on MODIS quality assurance confidence (QAC) value. However, when stratified by satellite, MODIS-Terra data does not perform as well as Aqua, with especially poor correlation (r = 0.39) for low aerosol loading conditions (AERONET AOD less than 0.15).Linear regressions between Terra and AERONET possess statistically-different slopes for AOD < 0.15 and AOD > or = 0.15. AERONET AOD measured only during MODIS overpass hours is highly correlated with daily-averaged AERONET AOD. MODIS monthly-averaged AOD also tracks that of AERONET over the study period. These results indicate that MODIS is sensitive to the day-to-day variability, as well as the annual cycle of AOD over the Appalachian State AERONET site. The complex topography and high seasonality in AOD and vegetation indices allow us to specifically evaluate MODIS dark target algorithm surface albedo and aerosol model assumptions at a regionally-representative SE US mountain site.

air quality↗

NASA NTRSDate not supplied

The PACE-MAPP Algorithm: Coupled Ocean/Aerosol Products

The PACE-MAPP algorithm, under development for combined SPEXone, HARP2 and OCI observations from NASA’s future Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) satellite mission, directly inverts the coupled atmosphere-ocean system to retrieve aerosol optical and microphysical properties and ocean optical properties simultaneously. PACE-MAPP thus retrieves the spectrally-resolved inherent optical properties of the Earth’s waters: the spectral particulate scattering coefficient, b_p (λ), the spectral absorption coefficient for particulates and color-dissolved matter, a_tot (λ), and the spectral particulate backscatter efficiency, b ̃_"bp". From these three spectrally-resolved components, we can derive the spectral particulate hemispherical backscattering coefficient b_bp (λ) and the spectral diffuse attenuation coefficient K_"d" (λ). Direct comparisons of b_"bp" (532) and K_"d" (532) are made to collocated High-Spectral Resolution Lidar (HSRL) in-water measurements. The PACE-MAPP algorithm was tested using PACE-analog datasets collected by Research Scanning Polarimeter (RSP) observations during the NASA NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) and SABOR (Ship-Aircraft Bio-Optical Research) airborne campaigns, both of which also include ship-based in situ measurements.

Snorre Alfred Moen Stamnes↗

NASA NTRS1997

Determination of Aerosol Optical Depth and Land Surface Directional Reflectances Using Multiangle Imagery

Spectral aerosol optical depths, surface hemispherical-directional reflectance factors, and bihemispherical reflectances (albedos) are retrieved for an area of Glacier National Park using spectral, multiangle imagery obtained with the airborne advanced solid state array spectroradiometer (ASAS). The retrieval algorithms are described and are identical in principle to those being devised for use by the multiangle imaging spectroradiometer (MISR) which will fly on the EOS-AMI spacecraft in 1998. As part of its science mission, MISR will produce global coverage of both aerosol amounts an an surface reflection properties. The results in this paper represent the initial effort in applying the MISR algorithms to real data. These algorithms will undergo additional testing and validation as more multiangle data become available.

Martonchik, John V.↗

NASA NTRSDate not supplied

CALIOP Stratospheric Aerosol Typing Performance of Smoke from the 2019-2020 Australian Bushfire Event

A series of pyroCb events occurring in southeast Australia in late December 2019 and early January 2020 injected a large amount of smoke into the stratosphere. CALIOP observations provided critical measurements of the plume in the stratosphere which gave clues about its microphysical properties. An upcoming revised version of the CALIOP level 2 data products (V4.5) will feature improved aerosol typing in the stratosphere. Above the tropopause, the level 2 products discriminate between smoke, volcanic ash, and volcanic sulfate. Accuracy of aerosol typing is critical for automated surveys characterizing distributions of anthropogenic versus natural aerosol and is essential for accurate aerosol extinction retrievals from elastic backscatter lidars such as CALIOP. This poster assesses the performance of the prototype V4.5 CALIOP stratospheric aerosol typing algorithm for the Australian bushfire event.

Jason Tackett↗

DOE OSTI2018

Profiling at Oliktok Point to Enhance Year of Polar Prediction Experiments (POPEYE) Science Plan

The arctic region is rapidly evolving, and enhanced predictive capabilities, for both weather and climate, are urgently required. Therefore, the international community has formulated plans for the execution of an extended period of focused observations and modeling of the arctic environment, dubbed the “Year of Polar Prediction” or YOPP. The YOPP will feature “special observing periods” (SOPs), with the first occurring in the spring of 2018, and a second during the late summer and early fall. This project deploys additional U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) facility resources to Oliktok Point, Alaska during the second three-month special observing period (1 July 2018-30 September 2018). These resources include additional radiosondes (1 more per day), ARM-operated unmanned aircraft (DH2) and ARM-operated tethered balloon systems (TBS). These instruments will conduct routine profiling activities over the course of the SOP to obtain measurements of atmospheric thermodynamic structure, cloud and precipitation properties, and aerosol properties, enhancing the measurements obtained from the third ARM Mobile Facility at Oliktok Point (AMF3). We anticipate that these measurements will be used for a variety of purposes, including: 1) to conduct detailed studies of arctic cloud and aerosol processes; 2) to inform YOPP modeling efforts through real-time availability for assimilation into operational and research analysis products; 3) to evaluate and improve retrieval algorithms involving ARM remote sensors; 4) to evaluate and improve a variety of modeling tools being used to forecast arctic weather and climate; and 5) to initialize and evaluate simulations associated with a potential arctic large-eddy simulation (LES) framework similar to the ongoing LES ARM Symbiotic Simulation and Observation (LASSO) project.

Arctic processes, Oliktok Point, Year of Polar Pre↗

DOE OSTI2019

Profiling at Oliktok Point to Enhance Year of Polar Prediction (YOPP) Experiments (POPEYE) Field Campaign Report

The arctic region is rapidly evolving, and enhanced predictive capabilities, for both weather and climate, are urgently required. Therefore, the international community is executing an extended period of focused observations and modeling of the arctic environment, dubbed the Year of Polar Prediction or YOPP. The YOPP featured two special observing periods (SOPs) (and will feature a third in 2020). The first of the completed SOPs occurred in the spring of 2018, and the second during the late summer and early fall of 2018. Here, we summarize the deployment of additional U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility resources to the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska during the second three-month SOP (1 July 2018–30 September 2018). This deployment, named POPEYE (Profiling at Oliktok Point to Enhance YOPP Experiments), included the launching of extra radiosondes (one more per day) and operation of ARM-operated unmanned aircraft (DataHawk 2s) and ARM-operated tethered balloons. These instruments conducted routine profiling activities over the course of the special observing period to obtain measurements of atmospheric thermodynamic structure, cloud and precipitation properties, and aerosol properties. These measurements are expected to be used for a variety of purposes, including: 1) to conduct detailed studies of arctic cloud and aerosol processes; 2) to inform YOPP modeling efforts through real-time availability for assimilation into operational and research analysis products; 3) to evaluate and improve retrieval algorithms involving ARM remote sensors; 4) to evaluate and improve a variety of modeling tools being used to forecast arctic weather and climate; and 5) to initialize and evaluate simulations associated with a potential arctic large-eddy (LES) simulation framework similar to the ongoing LES ARM Symbiotic Simulation and Observation (LASSO) project.

Oliktok Point, Arctic processes, unmanned aerial v↗

NASA NTRS2012

Accuracy Assessments of Cloud Droplet Size Retrievals from Polarized Reflectance Measurements by the Research Scanning Polarimeter

We present an algorithm for the retrieval of cloud droplet size distribution parameters (effective radius and variance) from the Research Scanning Polarimeter (RSP) measurements. The RSP is an airborne prototype for the Aerosol Polarimetery Sensor (APS), which was on-board of the NASA Glory satellite. This instrument measures both polarized and total reflectance in 9 spectral channels with central wavelengths ranging from 410 to 2260 nm. The cloud droplet size retrievals use the polarized reflectance in the scattering angle range between 135deg and 165deg, where they exhibit the sharply defined structure known as the rain- or cloud-bow. The shape of the rainbow is determined mainly by the single scattering properties of cloud particles. This significantly simplifies both forward modeling and inversions, while also substantially reducing uncertainties caused by the aerosol loading and possible presence of undetected clouds nearby. In this study we present the accuracy evaluation of our algorithm based on the results of sensitivity tests performed using realistic simulated cloud radiation fields.

Rainbow↗

NASA NTRS2021

First retrieval of AOD at fine-resolution over shallow and turbid coastal waters from MODIS

The widely used Moderate Resolution Imaging Spectroradiometer (MODIS) Dark-Target (DT) aerosol product fails to accurately retrieve Aerosol Optical Depth (AOD) over shallow and turbid Coastal Waters (CWs). To fill in gaps, and to improve land to ocean AOD continuity, we developed a coastal water retrieval algorithm at a spatial resolution of 1 km (CW-1km). CW-1km relies on observed top-of-atmosphere reflectance at 2.1 μm (ρ2.1), both to derive AOD and to perform a spatial variation test that enhances the existing DT masks for clouds and land. We show that the CW-1km improves spatial continuity of AOD between land, coast, and open ocean, while also increasing AOD product availability by 47.0%. Comparing with 15 years of marine aerosol network measurements, CW-1km AODs are validated to have a normalized mean bias of 1.0%, which is much smaller than 17.6% for the original DT product.

MODIS AOD↗