SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Priority inversion occurs when a process is delayed by the actions of another process with less priority. With atomic transations, the concurrency control mechanism can cause delays, and without taking priorities into account can be a source of priority inversion. In this paper, three traditional concurrency control algorithms are extended so that they are free from unbounded priority inversion.
This report covers work performed at Pratt & Whitney on development of copper-based materials for long-life, reusable, regeneratively cooled rocket engine thrust chambers. The program approached the goal of enhanced cyclic life through the application of rapid solidification to alloy development, to introduce fine dispersions to strengthen and stabilize the alloys at elevated temperatures. After screening of alloy systems, copper-based alloys containing Cr, Co, Hf, Ag, Ti, and Zr were processed by rapid-solidification atomization in bulk quantities. Those bulk alloys showing the most promise were characterized by tensile testing, thermal conductivity testing, and elevated-temperature, low-cycle fatigue (LFC) testing. Characterization indicated that Cu- 1.1 percent Hf exhibited the greatest potential as an improved-life thrust chamber material, exhibiting LCF life about four times that of NASA-Z. Other alloys (Cu- 0.6 percent Zr, and Cu- 0.6 percent Zr- 1.0 percent Cr) exhibited promise for use in this application, but needed more development work to balance properties.
The past funding period was productive for the group. The progress in the mechanosensitive channel field was critically affected in the end of 1998 by the solution of the crystal structure of the mycobacterial homolog of MscL by our colleagues from Caltech. Having the structure of TbMscL in the closed state, we developed a detailed homology model of EcoMscL, and related the structural model with the wealth of functional phenomenology available for the E. coli version of the channel (EcoMscL). The biophysical properties of the open MscL helped to model the open conformation and infer the pathway for the entire gating transition. The following experiments provided strong support to the atomic model of the gating process, and allowed to make further predictions. The work has advanced our understanding of tension-driven conformational transitions in membrane-embedded mechanosensory proteins, determine major energetic contributions and set the stage for further exploration of the whole family of mechanosensitive channels. The results have been published in seven experimental and theoretical papers, with three other papers currently in press or in preparation.
SiGe is an important semiconductor alloy for high-speed field effect transistors (FETs), high-temperature thermoelectric devices, photovoltaic solar cells, and photon detectors. The growth of SiGe layer is difficult because SiGe alloys have different lattice constants from those of the common Si wafers, which leads to a high density of defects, including dislocations, micro-twins, cracks, and delaminations. This innovation utilizes newly developed rhombohedral epitaxy of cubic semiconductors on trigonal substrates in order to solve the lattice mismatch problem of SiGe by using trigonal single crystals like sapphire (Al2O3) as substrate to give a unique growth-orientation to the SiGe layer, which is automatically controlled at the interface upon sapphire (0001). This technology is different from previous silicon on insulator (SOI) or SGOI (SiGe on insulator) technologies that use amorphous SiO2 as the growth plane. A cubic semiconductor crystal is a special case of a rhombohedron with the inter-planar angle, alpha = 90 deg. With a mathematical transformation, all rhombohedrons can be described by trigonal crystal lattice structures. Therefore, all cubic lattice constants and crystal planes (hkl) s can be transformed into those of trigonal crystal parameters. These unique alignments enable a new opportunity of perfect lattice matching conditions, which can eliminate misfit dislocations. Previously, these atomic alignments were thought to be impossible or very difficult. With the invention of a new x-ray diffraction measurement method here, growth of cubic semiconductors on trigonal crystals became possible. This epitaxy and lattice-matching condition can be applied not only to SiGe (111)/sapphire (0001) substrate relations, but also to other crystal structures and other materials, including similar crystal structures which have pointgroup rotational symmetries by 120 because the cubic (111) direction has 120 rotational symmetry. The use of slightly miscut (less than plus or minus 10 deg.) sapphire (0001) substrate can be used to improve epitaxial relationships better by providing attractive atomic steps in the epitaxial process.
Mercury is surrounded by a tenuous, collisionless exosphere where the surface of the planet is directly exposed to the space environment. As a consequence, impacts and space weathering processes are expected to eject atoms and molecules from the surface into the exosphere, implying a direct link between the exospheric composition and the planet's regolith material. However, observational evidence demonstrating this link has been elusive. Here we report that exospheric magnesium, a species recently discovered and systematically measured by the Mercury Surface, Space ENvironment, GEochemistry, and Ranging mission, is enhanced when observed over a portion of the planet's surface regolith rich in magnesium. These observations confirm a direct link between Mercury's magnesium exosphere and the underlying crustal surface composition, providing strong evidence supporting theoretical arguments that impact vaporization can directly supply material to the exosphere from the regolith of a rocky, airless body.
Mercury is surrounded by a tenuous, collisionless exosphere where the surface of the planet is directly exposed to the space environment. As a consequence, impacts and space weathering processes are expected to eject atoms and molecules from the surface into the exosphere, implying a direct link between the exospheric composition and the planet's regolith material. However, observational evidence demonstrating this link has been elusive. Here we report that exospheric magnesium, a species recently discovered and systematically measured by the Mercury Surface, Space ENvironment, GEochemistry, and Ranging mission, is enhanced when observed over a portion of the planet's surface regolith rich in magnesium. These observations confirm a direct link between Mercury's magnesium exosphere and the underlying crustal surface composition, providing strong evidence supporting theoretical arguments that impact vaporization can directly supply material to the exosphere from the regolith of a rocky, airless body.
Mercury is surrounded by a tenuous, collisionless exosphere where the surface of the planet is directly exposed to the space environment. As a consequence, impacts and space weathering processes are expected to eject atoms and molecules from the surface into the exosphere, implying a direct link between the exospheric composition and the planet's regolith material. However, observational evidence demonstrating this link has been elusive. Here we report that exospheric magnesium, a species recently discovered and systematically measured by the Mercury Surface, Space ENvironment, GEochemistry, and Ranging mission, is enhanced when observed over a portion of the planet's surface regolith rich in magnesium. These observations confirm a direct link between Mercury's magnesium exosphere and the underlying crustal surface composition, providing strong evidence supporting theoretical arguments that impact vaporization can directly supply material to the exosphere from the regolith of a rocky, airless body.
"Sputtering" is the process of applying film-like metal coatings onto a surface by bombarding the coating material with electrocharged ions. This causes the material to disintegrate and relocate on the substrate an atom layer at a time. The process allows a variety of coating materials to be deposited on various surfaces. Deposition Technology, Inc. (DTI) uses "sputtering" for window films, packaging materials, etc. Valves installed on two vacuum chambers which are part of DTI's system, were developed by Lewis Research Center and detailed in Tech Briefs. The valve protects the environment and frees the operator from monitoring the chamber venting.
Oxidation-driven carbon erosion does not occur uniformly but rather through the development of localized etch pits at active surface sites. These active sites form due to atomic defects on the carbon surface, making them significantly more reactive than the surrounding, non-defective areas. As a result, these sites are the first to react during ablation, leading to their removal. This process creates new defects in neighboring atoms, increasing their reactivity and causing localized carbon removal around these active sites. In this way, the highly reactive defective areas serve as nucleation points for the formation and growth of etch pits, which can have adverse effects on structural integrity of FiberForm. To better understand how these etch pits impact the material properties of carbon fiber microstructures, we have developed a new capability within the direct simulation Monte Carlo (DSMC) framework to capture the etch pit formation process. This capability, integrated into the DSMC code SPARTA (Stochastic Parallel Rarefied-gas Time-accurate Analyzer), models material removal in the presence of active sites, leading to the formation of etch pits. The current work focuses on studying the effects of these etch pits on the material properties of FiberForm, a widely used base material in thermal protection systems (TPS). The microstructure of virgin FiberForm, obtained via X-ray microtomography, is imported into SPARTA to generate the ablated geometries with etch pits. These modified microstructures are then analyzed using the Porous Microstructure Analysis (PuMA) software to compute various material properties, including elasticity, thermal conductivity, and permeability. We investigate the variation of these properties due to the complex surface topology changes caused by etch pit formation. Additionally, we compare the effects of pitting with the conventional model of shrinking fibers, traditionally used to simulate the ablation of carbon structures. Significant differences emerge between the two approaches. Consequently, this physically realistic model of material removal through etch pit formation offers improved accuracy in predicting the degradation of carbon-based TPS during oxidation. It also provides insights into other mechanisms, such as spallation, where chunks of material are removed into the flow due to etch pit growth. Ultimately, this model enhances our understanding of failure modes in these materials during ablation.
The purpose of this project was to quantify the rates of two processes which are crucial to our understanding of radiative energy balance in the upper atmosphere. The first process is radiative emission from vibrationally hot OH radicals following the H + O3 reaction in the upper mesosphere. The importance of this process depends strongly on the OH radiative emission coefficients. Our goal was to measure the OH permanent dipole moment in excited vibrational states and to use these measurements to construct an improved OH dipole moment function and improved radiative emission coefficients. Significant progress was made on these experiments including the construction of a supersonic jet source for vibrationally excited OH radicals. Unfortunately, our efforts to transport the OH radicals into a second lower pressure vacuum chamber were not successful, and we were unable to make improved dipole moment measurements for OH. The second key kinetic process which we attempted to quantify during this project is the rate of relaxation of bend-excited CO2 by oxygen atoms. Since excitation of the bending vibrational mode of CO2 is the major cooling mechanism in the upper mesosphere/lower thermosphere, the cooling rate of this region depends crucially on the rate of energy transfer out of this state. It is believed that the most efficient transfer mechanism is via atomic oxygen but the rate for this process has not been directly measured in the laboratory at appropriate temperatures and even the room temperature rate remains controversial. We attempted to directly measure the relaxation rate Of CO2 (010) by oxygen atoms using the discharge flow technique. This experiment was set up at Aerodyne Research. Again, significant progress was achieved in this experiment. A hot CO2 source was set up, bend excited CO2 was detected and the rate of relaxation of bend excited CO2 by He atoms was measured. Unfortunately, the project ran out of time before the oxygen atom kinetic studies could be implemented.
By the use of a new theory developed for collisions between atomic hydrogen and arbitrary ions or atoms, the cross section for the direct excitation process He(+)(1s) + H(1s) yields He(+)(2s) + H(Sigma) in which the H atom is left in any discrete or continuum final state is calculated. The results are compared with other theories and with recent measurements for He-3(+) energies between 22 and 346 keV. The theory predicts a maximum near 84 keV, in excellent agreement with the data. Above 200 keV all theories yield cross sections which do not decrease rapidly enough with increasing energy when compared with the data.
A fraction of the oxygen in the Martian atmosphere continually escapes to space because dissociative recombination of the O2(+) ions in the ionosphere can impart sufficient energy to the product O atoms. In addition, ionization of the extended atomic oxygen corona resulting from the above process adds to escape since the solar wind can carry away O(+) ions born above a few hundred km altitude. A further by-product of this ion-pickup by the solar wind is an additional population of escaping oxygen atoms that are sputtered from the atmosphere near the exobase by pickup ions that are on reentry rather than escaping trajectories. This sputtering process can also remove carbon in the form of intact or dissociated CO2 since all atoms and molecules in the 'target' gas are subject to the collisional energy transfer that characterizes sputtering. We have estimated the present rates of escape of oxygen and carbon due to these mechanisms, as well as the rates at several epochs in the history of the solar system.
A method is presented for treating radiative transfer in resonance lines, allowing for the full angle and frequency dependence of redistribution in the scattering process, as seen in the laboratory frame. The case of an equivalent-two-level-atom source function is considered; the problem to be treated is then linear in the radiation field. We apply this method to the Ca II lines in the solar atmosphere, using a redistribution function which takes into account a mixture of coherence in the atom's frame, with Doppler redistribution in the laboratory frame (for atoms which have not suffered an elastic collision), and of complete redistribution in the laboratory frame (for atoms that are collisionally perturbed during the emission process). Both the angle-averaged approximation and the full angle-dependent solution were obtained, and were compared to assess, differentially, the effects of angular redistribution upon the computed line profile and its center-to-limb behavior. For the Ca II line in a homogeneous solar chromosphere the angle-dependent effects are found to be negligible, indicating that one may use angle-averaged redistribution functions when studying partial redistribution effects in line profiles.
An analog tree-organized multiplexer (ATOM) which is intended for use in the telemetry system of an interplanetary spacecraft is designed. The ATOM will be fabricated by a monolithic, dielectric isolation process, and will contain silicon junction field effect transistors (JFET) as the active elements. The effect of the radiation environment on the performance of the ATOM is analyzed. The result indicates that the expected radiation environment will cause only minor changes in the preradiation characteristics of ATOM. The JFET in the ATOM is designed to meet the electrical requirements when fabricated by either the double poly-dielectric isolation process or the raised dielectric isolation process. The effect of the heat treatment required for the dielectric isolation process on the diffusion profile of the JFET is described. The layout of the ATOM circuit for fabrication by either the double poly or raised dielectric isolation process is also given.
Track damage and the associated ejection of atoms and molecules from insulators, which occur as a result of ion-induced electronic excitation, are of interest both in their own right and because of the mechanisms through which the energy in the excited electrons is transformed into atomic motion. In this paper an overview is given of the phenomena that are observed. We show that there is a remarkable similarity between the damage profile along the ion's track in the solid and the yield of ejected atoms at the energy that corresponds to each point on the track. It is also seen that the density of extended defects (or, correspondingly, the ejected particle yield) appears to have a 'universal' form that is weakly dependent on the type of material. In the model presented this is a consequence of the inner-shell ionization of light elements in the solid by the incident ion; the resulting Auger decay produces an intense ionization spike that locally triggers the track formation/erosion process. This model allows the estimation of erosion yields/damage profiles for different ions and materials.
Using theoretical quantum chemical calculations, I have successfully described the dissociative recombination (DR) of O2(+) leading to the excited S-1 state of atomic oxygen, the upper state of the well known green line emission. The process is described by O2(+) + e(-) yields O(S-1)) + O(D-1) (1) where e(-) is an electron and the product oxygen atoms are both excited. This process is important in the atmospheres of Venus, Mars and Earth. I have shown in prior calculations that only one repulsive potential curve of O2, f(sup l)Sigma(sub u, sup +) can generate O(S-1) from DR of the lowest vibrational levels of O2(+). However, in the prior results, the calculated quantum yield (i.e. the number of O(S-1) atoms produced for every two product atoms) from the O2(+) v = 0 level was smaller than the laboratory and atmospheric measurements by more than an order of magnitude. Including only direct recombination, the calculated quantum yield for O(S-1) is only 0.0016. In a calculation that accounts for both direct and indirect recombination, the quantum yield is 0.0012. The range of experimentally determined quantum yields is between 0.01 and 0.23. Because of this large difference between the theoretical and experimental quantum yields, it was thought for some time that the ionospheric and laboratory O2(+) must be vibrationally excited since for excited levels, theory gave quantum yields that are similar to experimental yields. It was also suggested that some other process was generating O(S-1) but none could be identified. Under current NASA support, I have found that reaction (1) proceeds via an unusual mechanism. The f(sup 1)Sigma(sub u, sup,+) state does not cross the ion between the turning points of the v = 0 level of the O2(+) ground state. The lack of a favorable crossing leads to a very small calculated DR rate coefficient. However, this mechanism assumes that initial electron capture must occur into the repulsive state that leads to )(S-1). Instead, I have found that initial electron capture occurs mostly into the B(sup 3)Sigma(sup u, sub -) state which crosses the ion between the turning points of the v = 0 ion level and has a large DR rate coefficient. The B state dissociates to O(D-1) and )(P-3). After capture, some of the flux is transferred to the f(sup 1)Sigma(sup u, sub +) state via symmetry mixed intermediate Rydberg states. The neutral Rydberg states are a mixture of Sigma(sub u, sup +)-1 and Sigma(sub u, sup -)-3 symmetry.
An International Space Station solar array validation coupon was exposed in a directed atomic oxygen beam for space environment durability testing at the NASA Lewis Research Center. Exposure to atomic oxygen and intermittent tensioning of the solar array were conducted to verify the solar array#s durability to low Earth orbital atomic oxygen and to the docking threat of plume loading both of which are anticipated over its expected mission life of fifteen years. The validation coupon was mounted on a specially designed rotisserie. The rotisserie mounting enabled the solar and anti-solar facing side of the array to be exposed to directed atomic oxygen in a sweeping arrival process replicating space exposure. The rotisserie mounting also enabled tensioning, in order to examine the durability of the array and its hinge to simulated plume loads. Flash testing to verify electrical performance of the solar array was performed with a solar simulator before and after the exposure to atomic oxygen and tensile loading. Results of the flash testing indicated little or no degradation in the solar array#s performance. Photographs were also taken of the array before and after the durability testing and are included along with comparisons and discussions in this report. The amount of atomic oxygen damage appeared minor with the exception of a very few isolated defects. There were also no indications that the simulated plume loadings had weakened or damaged the array, even though there was some erosion of Kapton due to atomic oxygen attack. Based on the results of this testing, it is apparent that the International Space Station#s solar arrays should survive the low Earth orbital atomic oxygen environment and docking threats which are anticipated over its expected mission life.
Spectra of the shock layer radiation incident on the stagnation point of a blunt body placed in an arc-jet wind tunnel were measured over the wavelength range from 600 nm to 880 nm. The test gas was a mixture of 80 percent air and 20 percent argon by mass, and the run was made in a highly nonequilibrium environment. The observed spectra contained contributions from atomic lines of nitrogen, oxygen, and argon, of bound-free and free-free continua, and band systems of N2 and N2(+). The measured spectra were compared with the synthetic spectra, which were obtained through four steps: the calculation of the arc-heater characteristics, of the nozzle flow, of the blunt-body flow, and the nonequilibrium radiation processes. The results show that the atomic lines are predicted approximately correctly, but all other sources are underpredicted by orders of magnitude. A possible explanation for the discrepancy is presented.