Search NASA⌕ Search

SEARCH · Search NASA

Results for “boom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Preliminary study of supersonic-transport configurations with low values of sonic boom

A parametric study of low-boom supersonic transport airplanes with conventional configurations was made to identify the features of specific configurations that promise relatively low sonic boom overpressures (less than 47.9 N/sq m). The range of values considered was gross weight from 28,300 to 170,000 kg; cruise Mach numbers of 2 to 3.2; and wing loadings of 1436, 2870, and 4309 N/sq m. Fuselage length was varied from 49.1 to 102.4 m and fuselage diameter from 2.75 to 3.98 m. A nominal Mach 2 configuration weighing 56,700 kg and having a wing loading of 2870 N/sq m was selected; and its gross geometric, aerodynamic, and structural features were estimated. At a cruise altitude of 18,300 m, lift-drag ratio was estimated to be 7.35, while sonic boom overpressure was 41.7 N/sq m. Takeoff thrust loading using four afterburning turbojet engines at maximum dry thrust was 0.32. Payload for a 4440-km range was 16.7 percent of gross weight, giving a direct operating cost of 0.82 cent per seat statute mile.

Dugan, J. F., Jr.↗
NASA NTRS1973

Thermal static bending of deployable interlocked booms

Metal ribbons processed with a heat-forming treatment are enabled to form tubelike structures when deployed from a roll. Deployable booms of this have been utilized for gravity-gradient stabilization on the RAE, ATS, and Nimbus D satellites. An experimental thermal-mechanics test apparatus was developed to measure the thermal static bending and twist of booms up to 3 meters long. The apparatus was calibrated by using the correlation between calculated and observed thermal bending of a seamless tube. Thermal static bending values of 16 interlocked deployable booms were observed to be within a factor of 2.5 of the values calculated from seamless-tube theory. Out-of-Sun-plane thermal bending was caused by complex heat transfer across the interlocked seam. Significant thermal static twisting was not observed.

Staugaitis, C. L.↗
NASA NTRS1973

Application of sonic-boom minimization concepts in supersonic transport design

The applicability of sonic boom minimization concepts in the design of large supersonic transport airplanes capable of a 2500-nautical-mile range at a cruise Mach number of 2.7 is considered. Aerodynamics, weight and balance, and mission performance as well as sonic boom factors, have been taken into account. The results indicate that shock-strength nominal values of somewhat less than 48 newtons/sq m during cruise are within the realm of possibility. Because many of the design features are in direct contradiction to presently accepted design practices, further study of qualified airplane design teams is required to ascertain sonic boom shock strength levels actually attainable for practical supersonic transports.

Carlson, H. W.↗
NASA NTRS1973

The design or operation of aircraft to minimize their sonic boom.

Means of reducing or eliminating the sonic boom through aerodynamic design or aircraft operation are discussed. These include designing aircraft to minimize or eliminate certain features of the overpressure signature, operating aircraft at slightly supersonic speeds so that the sonic boom does not reach the ground, and seeking reductions through the high altitude-high speed flight conditions of hypersonic transports. A simple computer program has been developed that determines the area development of the equivalent body of revolution required to minimize various sonic boom signature parameters.

Seebass, A. R.↗
NASA NTRS1973

A study to determine the feasibility of a low sonic boom supersonic transport.

The objective of this study was to determine if a supersonic transport designed to produce a sonic boom signature with low overpressure represented a feasible concept. Two design goals were chosen: an overpressure of 1.0 psf or less for cruise at Mach 2.7 and an overpressure of 0.5 psf for cruise at Mach 1.5. Projected 1985 technology was assumed for the analysis. The principal effort was to develop cruise configurations capable of meeting the sonic boom goals. The Mach 2.7 goal was achieved with a blended arrow wing configuration and the Mach 1.5 design was a low arrow wing configuration with a horizontal tail. The development of these airplanes is summarized and the concept of a low sonic boom SST is evaluated.

Kane, E. J.↗
NASA NTRS1973

Research of the sonic-boom problem

Wind tunnel tests were conducted to determine the characteristics of sonic booms. A theoretical examination of nonlinear effects in near and far flow fields, as well as sonic boom shock strength, is reported. A study of the Mach lines and bicharacteristics in three dimensional flow was pursued. The direction derivatives if the bicharacteristics were calculated in a general three dimensional flow field. A second order theory for supersonic flow past slender bodies was developed. Formulas relating flow deflections to the Whitham F-function were derived, which permitted determination of the sonic boom strength from wind tunnel measurements fairly close to the body.

Drougge, G.↗
NASA NTRS1974

Sonic-boom ground pressure measurements from the launch and reentry of Apollo 16

Sonic-boom pressure signatures recorded during the launch and reentry phases of the Apollo 16 mission are presented. Five measurements were obtained along the vehicle ground track: 69 km (37.3 n. mi.) 92 km (49.8 n. mi.), and 130 km (70.3 n. mi.) down range from the launch site during ascent, and at 185 km (100 n. mi.) and approximately 5.5 km (3 n. mi.) from the splash-down point during reentry. Tracings of the measured signatures are included along with values of the overpressure, impulse, time duration, and rise times. Also included are brief descriptions of the launch and recovery test areas in which the measurements were obtained, the sonic-boom instrumentation deployment, flight profiles, and operating conditions for the launch vehicle and spacecraft, surface weather information at the measuring sites, and high-altitude weather information for the general measurement areas. Comparisons of the sonic-boom overpressures from Apollo 15 and 16 along with those from current aircraft are also presented.

Henderson, H. R.↗
NASA NTRS1973

Shuttle sonic boom - Technology and predictions

Because the shuttle differs significantly in both geometric and operational characteristics from conventional supersonic aircraft, estimation of sonic boom characteristics required a new technology base. The prediction procedures thus developed are reviewed. Flight measurements obtained for both the ascent and entry phases of the Apollo 15 and 16 and for the ascent phase only of the Apollo 17 missions are presented which verify the techniques established for application to shuttle. Results of extensive analysis of the sonic boom overpressure characteristics completed to date are presented which indicate that this factor of the shuttle's environmental impact is predictable, localized, of short duration and acceptable. Efforts are continuing to define the shuttle sonic boom characteristics to a fine level of detail based on the final system design.

Holloway, P. F.↗
NASA NTRS1974

Measurements of sonic-boom overpressures from Apollo space vehicles

This paper presents representative results of sonic-boom overpressure data recorded during the launch and reentry of the Apollo 15 and 16 space vehicle systems. Comparisons are made between measured overpressures and those predicted using available theory. The measurements were obtained along the vehicle ground track at 68, 87, 92, 129, and 970 km downrange from the launch site during ascent, and at 9, 13, 55, 185, and 500 km from the splash-down point during reentry. Also included are tracings of the sonic-boom signatures along with a brief description of the launch and recovery test areas in which the measurements were obtained, the sonic-boom instrumentation deployment, flight profiles and operating conditions, and high-altitude weather information for the general measurement areas.

Hilton, D. A.↗
NASA NTRS1974

Sonic-boom measurements in the focus region during the ascent of Apollo 17

Sonic-boom pressure signatures recorded during the ascent phase of Apollo 17 are presented. The measurements were obtained onboard six U.S. Navy ships positioned along the ground track of the spacecraft vehicle in the area of expected focus resulting from the flight path and acceleration of the vehicle. Tracings of the measured signatures are presented along with values of the maximum positive overpressure, positive impulse, signature duration, and bowshock rise time. Also included are brief descriptions of the ships and their location, the deployment of the sonic-boom instrumentation, flight profiles and operating conditions for the launch vehicle and spacecraft, surface-weather and sea-state information at the measuring sites, and high-altitude weather information for the general measurement areas. Comparisons of the measured and predicted sonic-boom overpressures for the Apollo 17 mission are presented. The measured data are also compared with data from the Apollo 15 and 16 missions and data from flight test programs of various aircraft.

Henderson, H. R.↗
NASA NTRS1974

Laboratory study of sonic booms and their scaling laws

This program undertook to seek a basic understanding of non-linear effects associated with caustics, through laboratory simulation experiments of sonic booms in a ballistic range and a coordinated theoretical study of scaling laws. Two cases of superbooms or enhanced sonic booms at caustics have been studied. The first case, referred to as acceleration superbooms, is related to the enhanced sonic booms generated during the acceleration maneuvers of supersonic aircrafts. The second case, referred to as refraction superbooms, involves the superbooms that are generated as a result of atmospheric refraction. Important theoretical and experimental results are briefly reported.

Toong, T. Y.↗
NASA NTRS1975

A precision six-meter deployable boom for the Mariner-Venus-Mercury 1973 magnetometer experiment

A unique deployable boom developed for accurately positioning magnetometers 6 meters (19.7 feet) from a spacecraft is described. Weight, mounting system, magnetic cleanliness, thermal dimensional stability, and natural frequency were critical constraints that were met. The boom was flown on Mariner 10 and deployed flawlessly. The design, development, and testing of the boom and optical alignment of the sensors are described. Design trades and problem solutions are discussed.

Burdick, H. F.↗
NASA NTRS1975

An evaluation of the MSBLS/nose boom interference for the approach and landing test

An analysis was performed to investigate whether or not the obstruction caused by boom-mounted probes forward of the Orbiter nose could cause Microwave Scan Beam Landing System (MSBLS) data dropout during the autoland flight phase of the Approach and Landing Test (ALT). The results indicate that there will be no interference from the nose boom to cause MSBLS data dropout for the flight conditions under which the ALT is to be performed. Additional analysis considering approach trajectories in more extreme wind conditions than anticipated for the ALT also indicates that the nose boom creates no interference.

Tate, J. M.↗
NASA NTRS1976

Sonic boom theory - Its status in prediction and minimization

This paper gives a brief review of the currently accepted understanding of sonic boom phenomena and describes the manner in which modified linearized theory and geometric acoustics are used to predict the sonic boom caused by a complex aircraft configuration. Minimization methods that have evolved in recent years are discussed with particular attention given to a method developed by Seebass and George for an isothermal atmosphere which was modified for the real atmosphere by Darden. An additional modification which permits the relaxation of the nose bluntness requirement in the defining aircraft is also discussed. Finally, an overview of current areas of sonic boom research is given.

Darden, C. M.↗
NASA NTRS1977

Bending and torsional vibrations of open tube booms on spinning spacecraft

The mathematical formulation is presented of the coupled bending and twisting equations of motion for open tube booms in spinning spacecraft. The equations are applicable to a general class of open tube booms whose shear center does not coincide with the centroid of the cross section. The emphasis in this paper is on the treatment of the coupled bending and twisting motions. The equations of motion of the center of mass are provided in other references. The results of a simulation of the bending and twisting motion of a circular cross-section boom having a small longitudinal slot on a spinning spacecraft is provided. The simulation demonstrates that the centrifugal forces will induce twisting motion due to offset shear center.

Juang, J. N.↗
NASA NTRS1978

Dynamics of spinning spacecraft during the deployment of flexible boom

The effect of flexibility on the dynamics of a spinning symmetrical spacecraft during the extension (or retraction) of boom-type appendages is treated by modeling the appendages as compound spherical pendula with varying lengths. Both boom stiffness and structural damping are included. For constant boom length the resulting linearized equations of motion contain periodic coefficients involving the spin frequency. A bounded transformation converts this system into a kinematically equivalent one (with only constant coefficients), whose stability is analyzed using the Kelvin-Tait-Chetaev theorem. The dynamics during extension is predicted by numerical simulation of the nonlinear equations.

James, P. K.↗
NASA NTRS1980

Status of knowledge of sonic booms

The effects of primary and secondary sonic boom carpets are reviewed with reference to waveform characteristics and audibility, role of the atmosphere, source characteristics, carpet measurements and predictions, effects of aircraft maneuvers, and sonic boom minimization. It is shown that primary booms which involve only propagation in the lower atmosphere are well predicted by means of current methods and are amendable to minimization.

Maglieri, D. J.↗
NASA NTRS1983

Boom Deploys With Controlled Energy Release

Collapsible boom is deployed in controlled fashion, yet has no electric or commandable elements. In effect, structure consists of many fiberglass "springs" forcibly coiled during initial stowage in canister. Consiberable amount of energy stored in structure is released during deployment. Boom consists of erect base, uncoiling transition zone, and still-coiled zones. Boom members form lattice structure shear-stiffened by diagonal elements when erected.

Packard, D. T.↗