Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Characterization of Heteroepitaxial GaAs Films Grown on Si Using Selective Area Nucleation

Selective area growth of GaAs on patterned Si substrates is a potentially low-cost approach to integrate III-V and Si materials for multijunction solar cells. The use of nanoscale openings in a dielectric material can minimize nucleation-related defects and allow thinner buffer layers to be used to accommodate strain and trap defects caused by lattice mismatch between Si and epitaxial III-V layers. We have developed a process to grow coalesced GaAs thin films on Si substrates using buffer layers patterned by soft nanoimprint lithography (SNIL). We use photoelectrochemistry to probe the performance of these films as photovoltaic absorbers, and discuss techniques to improve the material quality of the GaAs epilayer.

14 SOLAR ENERGY↗

Perpendicularly magnetized (001)-textured D0{sub 22} MnGa films grown on an (Mg{sub 0.2}Ti{sub 0.8})O buffer with thermally oxidized Si substrates

We report the growth of (001)-textured polycrystalline D0{sub 22} MnGa films with perpendicular magnetic anisotropy (PMA) on thermally oxidized Si substrates using an (Mg{sub 0.2}Ti{sub 0.8})O (MTO) buffer layer. The ordered D0{sub 22} MnGa film grown at the optimum substrate temperature of 530 °C on the MTO buffer layer shows PMA with magnetization of 80 kA/m, PMA energy density of 0.28 MJ/m{sup 3}, and coercivity of 2.3 T. The scanning transmission electron microscope analysis confirms the formation of a highly (001)-textured structure and the elementally sharp interfaces between the MTO layer and the MnGa layer. The achieved D0{sub 22} MnGa PMA films on an amorphous substrate will provide the possible pathway of integration of a Mn-based PMA film into Si-based substrates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoelectric Properties of GaN Layers Grown by Plasma-Assisted Molecular-Beam Epitaxy on Si(111) Substrates and SiC/Si(111) Epitaxial Layers

The photoelectric properties of GaN/SiC/Si(111) and GaN/Si(111) heterostructures grown by plasma-assisted molecular-beam epitaxy under the same growth conditions on identical silicon substrates, but with different buffer layers, are experimentally investigated. The GaN/SiC/Si(111) structure is formed on a Si substrate with the SiC buffer layer grown by a new atom-substitution technique and the GaN/Si(111) structure, on a Si substrate subjected to pre-epitaxial plasma nitridation. The significant effect of carbon-vacancy clusters contained in the SiC layer on the growth of the GaN layer and its optical and photoelectric properties is found. It is experimentally established that the GaN/SiC/Si(111) heterostructure has a higher photosensitivity than the GaN/Si(111) heterostructure. In the GaN/SiC/Si(111) heterostructure, the coexistence of two oppositely directed p–n junctions is observed. One p–n junction forms at the SiC/Si interface and the other, at the GaN/SiC interface. It is shown that the occurrence of an electric barrier in the GaN/Si(111) heterostructure at the GaN/Si(111) heterointerface is caused by the formation of a thin silicon-nitride transition layer during pre-epitaxial plasma nitridation of the Si(111) substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monolithic integration of rare-earth oxides and semiconductors for on-silicon technology

Several concepts of integration of the epitaxial rare-earth oxides into the emerging advanced semiconductor on silicon technology are presented. Germanium grows epitaxially on gadolinium oxide despite lattice mismatch of more than 4%. Additionally, polymorphism of some of the rare-earth oxides allows engineering of their crystal structure from hexagonal to cubic and formation of buffer layers that can be used for growth of germanium on a lattice matched oxide layer. Molecular beam epitaxy and metal organic chemical vapor deposition of gallium nitride on the rare-earth oxide buffer layers on silicon is discussed.

36 MATERIALS SCIENCE↗

High performance top-gated multilayer WSe2 field effect transistors

In this paper, high performance top-gated WSe 2 field effect transistor (FET) devices are demonstrated via a two-step remote plasma assisted ALD process. High-quality, low-leakage aluminum oxide (Al 2 O 3 ) gate dielectric layers are deposited onto the WSe 2 channel using a remote plasma assisted ALD process with an ultrathin (~1 nm) titanium buffer layer. The first few nanometers (~2 nm) of the Al 2 O 3 dielectric film is deposited at relatively low temperature (i.e. 50 °C) and remainder of the film is deposited at 150 °C to ensure the conformal coating of Al 2 O 3 on the WSe 2 surface. Additionally, an ultra-thin titanium buffer layer is introduced at the WSe2 channel surface prior to ALD process to mitigate oxygen plasma induced doping effects. Excellent device characteristics with current on–off ratio in excess of 106 and a field effect mobility as high as 70.1 cm 2 V –1 s –1 are achieved in a few-layer WSe 2 FET device with a 30 nm Al 2 O 3 top-gate dielectric. With further investigation and careful optimization, this method can play an important role for the realization of high performance top gated FETs for future optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) Heusler alloy

We have studied the structure and magnetoresistive properties of polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves (PSVs) with Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) (CMGG) ferromagnetic layers and a Ag spacer. With (110) textured CMGG thin films and (111) textured Ag spacer, the PSVs annealed at 350 °C with 2 nm CoFe buffer layers showed ΔRA of 3.7 mΩ μm{sup 2} and MR ratio of 12.2%, while the PSVs without the buffer layer showed ΔRA of only 1.3 mΩ μm{sup 2}. High angle angular dark field images showed that the drop of ΔRA by annealing was due to the deterioration of the multi-layer CMGG/Ag/CMGG structure. Energy-dispersive X-ray spectroscopy images further confirmed the interdiffusion between CMGG layer and the Ag layer outside the CMGG/Ag/CMGG trilayer. In addition, we discuss the difference in the magnetoresistive properties of polycrystalline and epitaxial PSVs.

36 MATERIALS SCIENCE↗

Intermixing at the In x S y /Cu 2 ZnSn(S,Se) 4 Heterojunction and Its Impact on the Chemical and Electronic Interface Structure

We report on the chemical and electronic structure of the interface between a thermally co-evaporated In x S y buffer and a Cu 2 ZnSn(S,Se) 4 (CZTSSe) absorber for thin-film solar cells. To date, such cells have achieved energy conversion efficiencies up to 8.6%. Using surface-sensitive X-ray and UV photoelectron spectroscopy, combined with inverse photoemission and bulk-sensitive soft X-ray emission spectroscopy, we find a complex character of the buffer layer. It includes oxygen, as well as selenium and copper that diffused from the absorber into the In x S y buffer, exhibits an electronic band gap of 2.50 ± 0.18 eV at the surface, and leads to a small cliff in the conduction band alignment at the In x S y /CZTSSe interface. After an efficiency-increasing annealing step at 180 °C in nitrogen atmosphere, additional selenium diffusion leads to a reduced band gap at the buffer layer surface (2.28 ± 0.18 eV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface engineering in epitaxial growth of layered oxides via a conducting layer insertion

There is a long-standing challenge in the fabrication of layered oxide epitaxial films due to their thermodynamic phase-instability and the large stacking layer number. Recently, the demand for high-quality thin films is strongly pushed by their promising room-temperature multiferroic properties. Here, we find that by inserting a conducting and lattice matched LaNiO{sub 3} buffer layer, high quality m = 5 Bi{sub 6}FeCoTi{sub 3}O{sub 18} epitaxial films can be fabricated using the laser molecular beam epitaxy, in which the atomic-scale sharp interface between the film and the metallic buffer layer explains the enhanced quality. The magnetic and ferroelectric properties of the high quality Bi{sub 6}FeCoTi{sub 3}O{sub 18} films are studied. This study demonstrates that insertion of the conducting layer is a powerful method in achieving high quality layered oxide thin films, which opens the door to further understand the underline physics and to develop new devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2D Oxides Realized via Confinement Heteroepitaxy

Novel confinement techniques facilitate the formation of non-layered 2D materials. Here it is demonstrated that the formation and properties of 2D oxides (GaO x , InO x , SnO x ) at the epitaxial graphene (EG)/silicon carbide (SiC) interface is dependent on the EG buffer layer properties prior to element intercalation. Using 2D Ga, it is demonstrated that defects in the EG buffer layer lead to Ga transforming to GaO x with non-periodic oxygen in a crystalline Ga matrix via air oxidation at room temperature. However, crystalline monolayer GaO 2 and bilayer Ga 2 O 3 with ferroelectric wurtzite structure(FE-WZ') can then be formed via subsequent high-temperature O 2 annealing. Furthermore, the graphene/X/SiC (X = 2D Ga or Ga 2 O 3 ) junction is tunable from Ohmic to a Schottky or tunnel barrier depending on the interface species. Finally, using vertical transport measurements and electron energy loss spectroscopy analysis, the bandgap of 2D gallium oxide is identified as 6.6 ± 0.6 eV, significantly larger than that of bulk β-Ga 2 O 3 (≈4.8 eV), suggesting strong quantum confinement effects at the 2D limit. Furthermore, the study presented here is foundational for development of atomic-scale, vertical 2D/3D heterostructure for applications requiring short transit times, such as GHz and THz devices.

2D gallium oxides↗

Crosscutting Recombination Metrology for Expediting VOC Engineering

Work carried out under this grant addressed the need for improved materials and device characterization of solar cell designs. This experimental program aimed to develop joint electrical and optical studies of solar cells based on the group-II-VI semiconductor CdTe and the chalcogenide semiconductor Cu(InGa)Se 2 . Electrical measurements focused on temperature (T) and illumination intensity (I) dependence of the open-circuit voltage (VOC), a quantity that plays an important role in conversion efficiency. The VOC depends on temperature and illumination intensity through the energy gap and positions of the quasiFermi levels (QFLs). Optical measurements exploited the illumination and temperature dependence of absolute photoluminescence (PL) intensity (PL-I), a quantity that also depends on the QFL positions. The QFL splitting is a quantity that also depends on recombination rates within the solar cell, including radiative and non-radiative processes. Other factors affect the electrical and optical properties. These include band offsets at both the front and back interfaces of the device active region where electrical contacts are formed. Understanding, locating, and quantifying the recombination properties of the solar cells was the principal goal of this research. Custom simulations were developed to solve continuity and Poisson equations selfconsistently to obtain free-electron and free-hole concentrations. The measurements of temperature and intensity dependent VOC and PL-I allowed the extraction of a number of physical parameters including the conduction band offset, the shunt constant, and the effective capture coefficient for recombination centers, both within the absorber and at the absorber-buffer interface. In addition, the back-contact barrier height is determined from electrical properties. Each of these is discussed in the report. The illumination intensity dependence of VOC and PL-I do not overlap in experiments primarily because PL is not observed in the low-intensity regime where VOC is studied. Absolute PL-I measurements enabled development of an approach directly comparing it with VOC. This in turn allowed development of a simulation capability that would consistently use both measurements, as functions of T and I, for producing a minimization scheme using a differential evolution algorithm. The approach was applied to both CdTe and Cu(InGa)Se 2 solar cells each prepared under various conditions. Shunt conductivity, QFL splitting, recombination were measured. Also extensively studied are current-voltage and frequency-dependent capacitance voltage. Work completed under this grant included studies of magnesium zinc oxide (MZO) buffered CdTe solar cells including the effects of hydroiodic acid (HI) treatment. From these studies the recombination rates were quantified at the buffer/absorber (front) interface. The effect of back-contact barrier height was investigated. CdTe solar cells were prepared with CdSe and CdS buffer layers. Lower grain-boundary potential fluctuation, higher back-contact barrier height, and greater bulk recombination were observed in early devices with CdSe buffer layer. Investigations were also carried out into CdS/Cu(InGa)Se 2 solar cells. A metal-insulatorsemiconductor capacitance-voltage technique was developed to extract recombinationrelevant properties of the absorber interface. From this work the density of interface states D it , their capture cross-section σ, fixed charge at the interface Q f , and surface recombination velocity were all extracted.

14 SOLAR ENERGY↗

Growth of GaP1 − x − yAsyNx on Si substrates by chemical beam epitaxy

Chemical beam epitaxy has been used to grow layers of GaP1 − xNx, GaP1 − yAsy, and nearly lattice-matched layers GaP1 − x − yAsyNx on Si substrates. To address the issue of antiphase domain generation associated with the growth of polar semiconductors on Si, misoriented Si(001) substrates have been used combined with a carefully designed GaP buffer layer growth. The reflection high-energy electron diffraction pattern exhibits a (2 × 4) surface reconstruction after GaP buffer layer and GaP(As,N) graded layer growth, indicating the good surface quality and planarity of the grown layers. Sample composition was obtained by simultaneous acquisition of Rutherford backscattering spectrometry and nuclear reaction analysis, indicating a linear dependence of N and As mole fractions on the flux of their respective precursor. GaP1 − x − yAsyNx layers grown on Si substrates have a lattice mismatch not larger than ±0.005 for N contents in the range 0.02 < x < 0.05. High-resolution X-ray diffraction reciprocal space maps demonstrate a good crystalline quality. Intense photoluminescence spectra have been measured in all GaP1 − xNx and GaP1 − x − yAsyNx layers, as it is expected for direct bandgap materials. Two wide overlapped emission peaks are observed in all the spectra, most likely related to near bandgap recombination. The position of the higher energy peak for GaP1 − xNx and GaP1 − x − yAsyNx layers has been compared to bandgap energy calculations using the band anticrossing model, showing good agreement.

Ben Saddik, K.↗

Band offset at the heterojunction interfaces of CdS/ZnSnP{sub 2}, ZnS/ZnSnP{sub 2}, and In{sub 2}S{sub 3}/ZnSnP{sub 2}

Heterojunctions were formed between ZnSnP{sub 2} and buffer materials, CdS, ZnS, and In{sub 2}S{sub 3}, using chemical bath deposition. The band offset was investigated by X-ray photoelectron spectroscopy based on Kraut method. The conduction band offset, ΔE{sub C}, between ZnSnP{sub 2} and CdS was estimated to be −1.2 eV, which significantly limits the open circuit voltage, V{sub OC}. Conversely, ΔE{sub C} at the heterojunction between ZnSnP{sub 2} and ZnS was +0.3 eV, which is within the optimal offset range. In the case of In{sub 2}S{sub 3}, ΔE{sub C} was a relatively small value, −0.2 eV, and In{sub 2}S{sub 3} is potentially useful as a buffer layer in ZnSnP{sub 2} solar cells. The J−V characteristics of heterojunction diodes with an Al/sulfides/ZnSnP{sub 2} bulk/Mo structure also suggested that ZnS and In{sub 2}S{sub 3} are promising candidates for buffer layers in ZnSnP{sub 2} thin film solar cells, and the band alignment is a key factor for the higher efficiency of solar cells with heterojunctions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray combined analysis of fiber-textured and epitaxial Ba(Sr,Ti)O{sub 3} thin films deposited by radio frequency sputtering

A complete study is given in this paper on the structural properties of Ba(Sr,Ti)O{sub 3} (BST) thin films which present various preferred orientations: (111) and (001) fiber and epitaxial textures. The films are deposited in situ at 800 deg. C by sputtering on Si/SiO{sub 2}/TiO{sub x}/Pt substrates and the orientation is controlled by monitoring the concentration of O{sub 2} in the reactive plasma or by prior deposition of a very thin TiO{sub x} buffer layer between BST films and substrates. The epitaxial films are obtained on (001)-alpha-Al{sub 2}O{sub 3} substrates covered with TiO{sub x} buffer layers. In order to analyze finely the preferred orientations, the texture, the microstructural features, and the anisotropy-related quantities such as residual stresses in the films, the conventional Bragg-Brentano {theta} - 2{theta} x-ray diffraction diagrams is shown not to be sufficient. So, we systematically used x-ray combined analysis, a recently developed methodology which gives access to precise determination of the structure (cell parameters and space group) of the films, their orientation distributions (texture strengths and types) and mean crystallite sizes, their residual stresses. This fine structural analysis shows important modifications between the film qualities which induce differences in BST films electrical behavior, permittivity, loss tangent, and tunability.

36 MATERIALS SCIENCE↗

Composition and Interface Analysis of InGaN/GaN Multiquantum-Wells on GaN Substrates Using Atom Probe Tomography

In0.20Ga0.80N/GaN multi-quantum wells grown on [0001]-oriented GaN substrates with and without an InGaN buffer layer were characterized using three-dimensional atom probe tomography. In all samples, the upper interfaces of the QWs were slightly more diffuse than the lower interfaces. The buffer layers did not affect the roughness of the interfaces within the quantum well structure, a result attributed to planarization of the surface of the 1st GaN barrier layer which had an average root-mean-square roughness of 0.177 nm. The In and Ga distributions within the MQWs followed the expected distributions for a random alloy with no indications of In clustering.

Environmental Molecular Sciences Laboratory↗

Effects of high-temperature AIN buffer on the microstructure of AlGaN/GaN HEMTs

Effects on AlGaN/GaN high-electron-mobility transistor structure of a high-temperature AlN buffer on sapphire substrate have been studied by high-resolution x-ray diffraction and atomic force microscopy techniques. The buffer improves the microstructural quality of GaN epilayer and reduces approximately one order of magnitude the edge-type threading dislocation density. As expected, the buffer also leads an atomically flat surface with a low root-mean-square of 0.25 nm and a step termination density in the range of 10{sup 8} cm{sup -2}. Due to the high-temperature buffer layer, no change on the strain character of the GaN and AlGaN epitaxial layers has been observed. Both epilayers exhibit compressive strain in parallel to the growth direction and tensile strain in perpendicular to the growth direction. However, an high-temperature AlN buffer layer on sapphire substrate in the HEMT structure reduces the tensile stress in the AlGaN layer.

36 MATERIALS SCIENCE↗

Bi-substituted iron garnet films for one-dimensional magneto-photonic crystals: Synthesis and properties

Graphical abstract: Faraday hysteresis loops for Bi{sub 1.0}Y{sub 0.5}Gd{sub 1.5}Fe{sub 4.2}Al{sub 0.8}O{sub 12} film on glass-ceramic substrate (a), Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12} film on gallium–gadolinium garnet (b) and for glass-ceramic/SiO{sub 2}/Bi{sub 1.0}Y{sub 0.5}Gd{sub 1.5}Fe{sub 4.2}Al{sub 0.8}O{sub 12}/Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12} structure (c). Highlights: ► Bismuth-substituted iron garnet films as magneto-optical layers in magneto-photonic crystals. ► It is impossible to crystallize the films with high Bi content on amorphous substrates. ► The crystallization of the films can be achieved by their deposition on buffer layer with low bismuth content. -- Abstract: The crystallization processes in Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12}, Bi{sub 2.5}Gd{sub 0.5}Fe{sub 3.8}Al{sub 1.2}O{sub 12}, Bi{sub 1.5}Gd{sub 1.5}Fe{sub 4.5}Al{sub 0.5}O{sub 12} and Bi{sub 1.0}Y{sub 0.5}Gd{sub 1.5}Fe{sub 4.2}Al{sub 0.8}O{sub 12} garnet films deposited by reactive ion beam sputtering on (1 1 1) gadolinium–gallium garnet substrates, optical glass-ceramic and SiO{sub 2} films have been studied. Films were annealed at low pressure in oxygen atmosphere and in the air. The possibility of preparation of crystalline garnet films with high concentration of bismuth on the SiO{sub 2} films using a buffer layer with low concentration of Bi has been shown. This allows to produce one-dimensional magneto-photonic crystals with high effective Faraday rotation (several tens of°/μm for the visible optical spectrum).

36 MATERIALS SCIENCE↗

Planar regions of GaAs (001) prepared by Ga droplet motion

The authors describe a simple method for obtaining planar regions of GaAs (001) suitable for surface science studies. The technique, which requires no buffer layer growth, atomic hydrogen source, or the introduction of As flux, employs controllable Ga droplet motion to create planar trail regions during Langmuir evaporation. Low-energy electron microscopy/diffraction techniques are applied to monitor the droplet motion and characterize the morphology and the surface reconstruction. It is found that the planar regions exhibit atomic flatness at the level of a high-quality buffer layer.

42 ENGINEERING↗