Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalytic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Formal Oxidation States and Coordination Environments in the Catalytic Reduction of CO to Methanol

Fundamental insight into multi-electron, multi-proton redox reactions with organometallic catalysts is greatly facilitated by knowledge of the formal oxidation state of the metal center in each of the elementary reaction steps that comprise the catalytic cycle. X-ray absorption near edge structure (XANES) is utilized herein to quantify the oxidation states and coordination environment of the organometallic resting state and intermediates in a newly proposed catalytic reduction of carbon monoxide to methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Oxidative Catalytic Fractionation of Lignocellulosic Biomass Using a Co-N-P-C Catalyst and One-Step Isolation of Aromatic Monomers via Centrifugal Partition Chromatography

Methods for catalytic fractionation of biomass provide a means to convert lignin directly into monomers while generating a high-quality cellulosic stream, contrasting conventional biomass pretreatment strategies that prioritize the cellulosic fraction. Here, a nonprecious-metal Co-N-P-C catalyst is identified for aerobic oxidative catalytic fractionation (OCF) of poplar feedstock in dimethyl carbonate that achieves significantly higher yields of aromatic monomers (24 wt %) relative to those obtained with a recently reported Co-N-C catalyst in acetone solvent (15 wt %). Mechanistic studies indicate that the acidic properties of the catalyst contribute to its improved performance by promoting extraction of lignin from insoluble polysaccharides. This OCF process is complemented by the development of a new centrifugal partition chromatography (CPC) method that supports isolation of all five major aromatic monomers (syringic acid, syringaldehyde, vanillic acid, vanillin, and para-hydroxybenzoic acid) in a single liquid–liquid extraction purification step. Furthermore, this OCF/CPC sequence has important implications for future lignin valorization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insight into the Catalytic Mechanism of GH11 Xylanase: Computational Analysis of Substrate Distortion Based on a Neutron Structure

The reaction mechanism of biomass decomposition by xylanases remains the subject of debate. Here, to clarify the mechanism, we investigated the glycosylation step of GH11 xylanase, an enzyme that catalyzes the hydrolysis of lignocellulosic hemicellulose (xylan). Making use of a recent neutron crystal structure, which revealed the protonation states of relevant residues, we used ab initio quantum mechanics/molecular mechanics (QM/MM) calculations to determine the detailed reaction mechanism of the glycosylation step. In particular, our focus is on the controversial question of whether or not an oxocarbenium ion intermediate is formed on the reaction pathway. The calculations support the validity of a basic retaining mechanism within a double-displacement scheme. The estimated free energy barrier of this reaction is ~18 kcal/mol with QM/MM-CCSD(T)/6-31(+)G**//MP2/6-31+G**/AMBER calculations, and the rate-determining step of the glycosylation is scission of the glycosidic bond after proton transfer from the acidic Glu177. The estimated lifetime of the oxocarbenium ion intermediate (on the order of tens of ps) and the secondary kinetic isotope effect suggest that there is no accumulation of this intermediate on the reaction path, although the intermediate can be transiently formed. In the enzyme–substrate (ES) complex, the carbohydrate structure of the xylose residue at the -1 subsite has a rather distorted (skewed) geometry, and this xylose unit at the active site has an apparent half-chair conformation when the oxocarbenium ion intermediate is formed. The major catalytic role of the protein environment is to orient residues that take part in the initial proton transfer. Because of a fine alignment of catalytic residues, the enzyme can accelerate the glycosylation reaction without paying a reorganization energy penalty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic Hydrogenation of a Manganese(V) Nitride to Ammonia

The catalytic hydrogenation of a metal nitride to make free ammonia using a rhodium hydride catalyst that promotes H 2 activation and hydrogen atom transfer is described. The phenylimine-substituted rhodium complex, (η 5 -C 5 Me 5 )Rh( Me PhI)H ( Me PhI = N-methyl-1-phenylethan-1-imine) exhibited higher thermal stability compared to the previously reported (η 5 -C 5 Me 5 )Rh(ppy)H (ppy = 2-phenylpyridine). DFT calculations established that the two rhodium complexes have comparable Rh–H bond dissociation free energies of 51.8 kcal mol-1 for (η 5 -C 5 Me 5 )Rh(MePhI)H and 51.1 kcal mol -1 for (η 5 -C 5 Me 5 )Rh(ppy)H. In the presence of 10 mol% of the phe-nylimine rhodium precatalyst and 4 atm of H 2 in THF, the manganese nitride, ( tBu Salen)Mn≡N underwent hydrogenation to liberate free ammonia with up to 6 total turnovers of NH 3 or 18 turnovers of H·. The phenylpyridine analogue proved inactive for ammonia synthesis under identical conditions owing to competing deleterious hydride transfer chemistry. Subsequent research showed that the use of a non-polar solvent such as benzene suppressed formation of the cationic rhodium product resulting from the hydride transfer and enabled catalytic ammonia synthesis by proton coupled electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic Dynamic Kinetic Resolutions in Tandem to Construct Two-Axis Terphenyl Atropisomers

The defined structure of molecules bearing multiple stereogenic axes is of increasing relevance to materials science, pharmaceuticals, and catalysis. However, catalytic enantioselective approaches to control multiple stereogenic axes remain synthetically challenging. Here, we report the catalytic synthesis of two-axis terphenyl atropisomers, with complementary strategies to both chlorinated and brominated variants, formed with high diastereo- and enantioselectivity. The chemistry proceeds through a sequence of two distinct dynamic kinetic resolutions: first, an atroposelective ring opening of Bringmann-type lactones produces a product with one established axis of chirality, and second, a stereoselective arene halogenation delivers the product with the second axis of chirality established. In order to achieve these results, a class of Brønsted basic guanidinylated peptides, which catalyze an efficient atroposelective chlorination, is reported for the first time. In addition, a complementary bromination is reported, which also establishes the second stereogenic axis. These bromo-terphenyls are accessible following the discovery that chiral anion phase transfer catalysis by C 2 -symmetric phosphoric acids allows catalyst control in the second stereochemistry-determining event. Accordingly, we established the fully catalyst-controlled stereodivergent synthesis of all possible chlorinated stereoisomers while also demonstrating diastereodivergence in the brominated variants, with significant levels of enantioselectivity in all cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oxidative Catalytic Fractionation of Lignocellulosic Biomass under Non-alkaline Conditions

Biomass pretreatment methods are commonly used to isolate carbohydrates from biomass, but they often lead to modification, degradation, and/or low yields of lignin. Catalytic fractionation approaches provide a possible solution to these challenges by separating the polymeric sugar and lignin fractions in the presence of a catalyst that promotes cleavage of the lignin into aromatic monomers. In this work, we demonstrate an oxidative fractionation method conducted in the presence of a heterogeneous non-precious-metal Co-N-C catalyst and O 2 in acetone as the solvent. The process affords a 15 wt% yield of phenolic products bearing aldehydes (vanillin, syringaldehyde) and carboxylic acids (p-hydroxybenzoic acid, vanillic acid, syringic acid), complementing the alkylated phenols obtained from existing reductive catalytic fractionation methods. The oxygenated aromatics derived from this process have appealing features for use in polymer synthesis and/or biological funneling to value-added products, and the non-alkaline conditions associated with this process support preservation of the cellulose, which remains insoluble at reaction conditions and is recovered as a solid.

09 BIOMASS FUELS↗
DOE OSTI2023

Two Mesoporous Domains Are Better Than One for Catalytic Deconstruction of Polyolefins

Catalytic hydrogenolysis of polyolefins into valuable liquid, oil, or wax-like hydrocarbon chains for second-life applications is typically accompanied by the hydrogen-wasting co-formation of low value volatiles, notably methane, that increase greenhouse gas emissions. Catalytic sites confined at the bottom of mesoporous wells, under conditions in which the pore exerts the greatest influence over the mechanism, are capable of producing less gases than unconfined sites. A new architecture was designed to emphasize this pore effect, with the active platinum nanoparticles embedded between linear, hexagonal mesoporous silica and gyroidal cubic MCM-48 silica (mSiO 2 /Pt/MCM-48). This catalyst deconstructs polyolefins selectively into ~C 20 –C 40 paraffins and cleaves C–C bonds at a rate (TOF = 4.2 ± 0.3 s –1 ) exceeding that of materials lacking these combined features while generating negligible volatile side products including methane. The time-independent product distribution is consistent with a processive mechanism for polymer deconstruction. In contrast to time- and polymer length-dependent products obtained from non-porous catalysts, mSiO 2 /Pt/MCM-48 yields a C 28 -centered Gaussian distribution of waxy hydrocarbons from polyolefins of varying molecular weight, composition, and physical properties, including low-density polyethylene, isotactic polypropylene, ultrahigh-molecular-weight polyethylene, and mixtures of multiple, post-industrial polyolefins. Here, coarse-grained simulation reveals that the porous-core architecture enables the paraffins to diffuse away from the active platinum site, preventing secondary reactions that produce gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

1 H -1,2,3-Triazol-5-ylidenes as Catalytic Organic Single-Electron Reductants

Most of the known single-electron reductants are either metal based reagents, used in stoichiometric amount, or a combination of an organic species and a photocatalyst. Here we report that 1H-1,2,3-triazol-5-ylidenes act not only as stoichiometric one-electron donors, but also as catalytic organic reducing agents, without the need of a photocatalyst. As a proof of concept, we studied the reduction of quinones, which are well-known electron conveyors involved in various biological and industrial processes. Furthermore, this work also provides experimental evidence for the formation of a bis(triazolium)carbonate adduct, which acts as the resting state of the catalytic cycle and as the carbene reservoir.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nicotine-Inspired, De Novo-Designed SARS-CoV-2 Main Protease Inhibitors Reveal Unique Chemistry for Covalently Conjugating Both Cysteine and Histidine Residues in the Catalytic Dyad

Anecdotal reports about smokers with low SARS-CoV-2 infection rates prompted a search for nicotine and its pyrolysis products as SARS-CoV-2 main protease (M Pro ) inhibitors. From this search, 3-vinylpyridine was discovered as a weak binder for the M Pro S1 subsite and was used subsequently as a de novo starting point for covalent inhibitor design that quickly yielded a highly potent inhibitor, SR-A-174, with an IC 50 value of 60 nM. Representing a novel class of M Pro inhibitors, SR-A-174 features an N,N -diaryl-α,α-dichloroacetamide scaffold that facilitated rapid exploration of alternative covalent warheads and various N-substituents, leading to the identification of multiple inhibitors with potent antiviral activity. Eight such M Pro inhibitor structures were determined, all demonstrating covalent binding to catalytic Cys145 of M Pro . In six determined structures, binding is dominated by the covalent bond plus van der Waals contacts, which contrasts with the extensive hydrogen bond networks formed with peptidomimetic inhibitors such as nirmatrelvir. Strikingly, two N,N -diaryl-α,α-dichloroacetamide inhibitors exhibit an unprecedented dual covalent modification mode of the catalytic dyad, forming bonds to both Cys145 and His41 with a concomitant loss of both chlorides and displacing the inhibitors from the S1 subsite. This dyad-targeting reactivity suggests a novel route for bioconjugation of both cysteine and histidine.

SARS-CoV-2↗
DOE OSTI2020

In-situ structure and catalytic mechanism of NiFe and CoFe layered double hydroxides during oxygen evolution

NiFe and CoFe (MFe) layered double hydroxides (LDHs) are among the most active electrocatalysts for the alkaline oxygen evolution reaction (OER). Herein, we combine electrochemical measurements, operando X-ray scattering and absorption spectroscopy, and density functional theory (DFT) calculations to elucidate the catalytically active phase, reaction center and the OER mechanism. We provide the first direct atomic-scale evidence that, under applied anodic potentials, MFe LDHs oxidize from as-prepared α-phases to activated γ-phases. The OER-active γ-phases are characterized by about 8% contraction of the lattice spacing and switching of the intercalated ions. DFT calculations reveal that the OER proceeds via a Mars van Krevelen mechanism. The flexible electronic structure of the surface Fe sites, and their synergy with nearest-neighbor M sites through formation of O-bridged Fe-M reaction centers, stabilize OER intermediates that are unfavorable on pure M-M centers and single Fe sites, fundamentally accounting for the high catalytic activity of MFe LDHs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fine-tuned local coordination environment of Pt single atoms on ceria controls catalytic reactivity

Constructing single atom catalysts with fine-tuned coordination environments can be a promising strategy to achieve satisfactory catalytic performance. Herein, via a simple calcination temperature-control strategy, CeO 2 supported Pt single atom catalysts with precisely controlled coordination environments are successfully fabricated. The joint experimental and theoretical analysis reveals that the Pt single atoms on Pt 1 /CeO 2 prepared at 550 °C (Pt/CeO 2 -550) are mainly located at the edge sites of CeO 2 with a Pt–O coordination number of ca. 5, while those prepared at 800 °C (Pt/CeO 2 -800) are predominantly located at distorted Ce substitution sites on CeO 2 terrace with a Pt–O coordination number of ca. 4. Pt/CeO 2 -550 and Pt/CeO 2 -800 with different Pt 1 -CeO 2 coordination environments exhibit a reversal of activity trend in CO oxidation and NH 3 oxidation due to their different privileges in reactants activation and H 2 O desorption, suggesting that the catalytic performance of Pt single atom catalysts in different target reactions can be maximized by optimizing their local coordination structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Geometric alignment of aminoacyl-tRNA relative to catalytic centers of the ribosome underpins accurate mRNA decoding

Accurate protein synthesis is determined by the two-subunit ribosome’s capacity to selectively incorporate cognate aminoacyl-tRNA for each mRNA codon. The molecular basis of tRNA selection accuracy, and how fidelity can be affected by antibiotics, remains incompletely understood. Using molecular simulations, we find that cognate and near-cognate tRNAs delivered to the ribosome by Elongation Factor Tu (EF-Tu) can follow divergent pathways of motion into the ribosome during both initial selection and proofreading. Consequently, cognate aa-tRNAs follow pathways aligned with the catalytic GTPase and peptidyltransferase centers of the large subunit, while near-cognate aa-tRNAs follow pathways that are misaligned. These findings suggest that differences in mRNA codon-tRNA anticodon interactions within the small subunit decoding center, where codon-anticodon interactions occur, are geometrically amplified over distance, as a result of this site’s physical separation from the large ribosomal subunit catalytic centers. These insights posit that the physical size of both tRNA and ribosome are key determinants of the tRNA selection fidelity mechanism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries

The growth of lithium (Li) dendrites and the accumulation of dead Li (i.e., Li metal regions which are electronically disconnected from the current collector) significantly undermine the safety and performance of Li metal batteries. This study employs kilogram-scale atomic layer deposition technology to construct zinc oxide with a preferential (002) crystal orientation, which homogeneously forms on commercial carbon nanotube papers. Our approach emphasizes the importance of achieving a moderate Li adsorption energy and low Li migration energy barriers to suppress Li dendrite growth. In this work, we introduce the concept of "catalytic" effect for dead Li reconversion, as validated through time-of-flight secondary ion mass spectrometry, leading to a Li plating/stripping efficiency of 99.89%. The Ah-level Li metal pouch cells with high-nickel positive electrodes achieve a specific energy of 380 Wh kg -1 (based on the mass of the whole pouch cell) and demonstrate stable cycling under demanding conditions. Analysis of the cycled pouch cells confirms the structural integrity and provides insights into the mechanism of the dead Li "catalytic" conversion.

Shen, Huasen [Jianghan University, Wuhan (China)]↗
DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A deep learning approach for semantic segmentation of unbalanced data in electron tomography of catalytic materials

In computed TEM tomography, image segmentation represents one of the most basic tasks with implications not only for 3D volume visualization, but more importantly for quantitative 3D analysis. In case of large and complex 3D data sets, segmentation can be an extremely difficult and laborious task, and thus has been one of the biggest hurdles for comprehensive 3D analysis. Heterogeneous catalysts have complex surface and bulk structures, and often sparse distribution of catalytic particles with relatively poor intrinsic contrast, which possess a unique challenge for image segmentation, including the current state-of-the-art deep learning methods. To tackle this problem, we apply a deep learning-based approach for the multi-class semantic segmentation of a γ-Alumina/Pt catalytic material in a class imbalance situation. Specifically, we used the weighted focal loss as a loss function and attached it to the U-Net’s fully convolutional network architecture. We assessed the accuracy of our results using Dice similarity coefficient (DSC), recall, precision, and Hausdorff distance (HD) metrics on the overlap between the ground-truth and predicted segmentations. Our adopted U-Net model with the weighted focal loss function achieved an average DSC score of 0.96 ± 0.003 in the γ-Alumina support material and 0.84 ± 0.03 in the Pt NPs segmentation tasks. We report an average boundary-overlap error of less than 2 nm at the 90th percentile of HD for γ-Alumina and Pt NPs segmentations. The complex surface morphology of γ-Alumina and its relation to the Pt NPs were visualized in 3D by the deep learning-assisted automatic segmentation of a large data set of high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) tomography reconstructions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Promotion of adsorptive and catalytic properties of zeolitic Brønsted acid sites by proximal extra-framework Si(OH) x groups

Steric confinement in zeolites influences the catalytic conversion of alkanes. For zeolitic Brønsted acid sites, proximate extra-framework species introduce additional confinement to the pore constraints, enhancing the catalytic activity of alkane cracking. Although extra-framework alumina has been the most studied, here we report the element-specific impact of silica species. Further, by grafting extra-framework silica species close to Brønsted acid sites in H-ZSM-5 zeolite, the binding of bases like pyridine and amines is strengthened via van der Waals interactions with their aryl or alkyl chains. Brønsted acid sites close to extra-framework silica achieve a higher reaction rate of protolytic cracking of n-pentane via enthalpic (unlike entropic, as with extra-framework alumina) stabilization of the transition state by 24–51 kJ mol −1 . The lower activation energy points to an earlier transition state than in the presence of extra-framework alumina, with a better stabilization of the carbonium ions in the transition state compared to the parent zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tracking the dynamics of catalytic Pt/CeO2 active sites during water-gas-shift reaction

Abstract Understanding the atomistic structure of the active site during catalytic reactions is of paramount importance in both fundamental studies and practical applications, but such studies are challenging due to the complexity of heterogeneous systems. Here, we use Pt/CeO 2 as an example to study the dynamic nature of active sites during the water-gas-shift reaction (WGSR) by combining multiple in situ characterization tools. We show that the different concentrations of interfacial Pt δ+ – O – Ce 4+ moieties at Pt/CeO 2 interfaces are responsible for the rank of catalytic performance of Pt/CeO 2 catalysts: Pt/CeO 2 -rod > Pt/CeO 2 -cube > Pt/CeO 2 -oct. For all the catalysts, metallic Pt is formed during the WGSR, leading to the transformation of the active sites to Pt 0 – O v – Ce 3+ and interface reconstruction. These findings shed light on the nature of the active site for the WGSR on Pt/CeO 2 and highlight the importance of combining complementary in situ techniques for establishing structure-performance relationships.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A stable and highly selective metalloporphyrin based framework for the catalytic oxidation of cyclohexene

A new metalloporphyrin framework of molybdenum Mo 2 O 4 (C 48 H 28 N 4 O 8 )·(CH 3 ) 2 NH·5H 2 O·2DMF (Mo 2 TCPP) was synthesized from tetrakis(4-carboxyphenyl)porphyrin (H 4 TCPP) and sodium molybdate dihydrate by a hydrothermal method. Mo 2 TCPP is a 3D network with two sub-units, in which both TCPP ligands and each Mo 2 dimer act as four connection nodes. The crystal structure was determined by single crystal analysis and further characterized by FTIR, SEM, EDX, PXRD, XPS and TGA. Here cumene hydrogen peroxide and hydrogen peroxide were used as oxidants to study the catalytic activity of new metalloporphyrins in the oxidation of cyclohexene at different temperatures. The conversion rate of cyclohexene and the selectivity of epoxycyclohexane were both higher than 99%, which was better than the previously published research results. The stability of the catalyst before and after the reaction was further tested for 10 runs without obvious degradation. The catalyst was stable in different solutions such as acidic, water and alkaline. These results shed light on the future development of new catalytic materials based on metalloporphyrin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗