Search NASA⌕ Search

SEARCH · Search NASA

Results for “coexistence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Investigation of the excited states of 114 Sn using the GRIFFIN spectrometer at TRIUMF

The semi-magic 110-122 Sn isotopes display signs of shape coexistence in their excited 0 + states, which, in contrast to the spherical 0+ ground states, are deformed. Here, this paper investigates the nuclear structure of 114 Sn using the competing β + decay and electron capture of a radioactive beam of 114 Sb produced at the TRIUMF-ISAC facility using the GRIFFIN spectrometer. This study will allow for an in-depth understanding of the excited 0 + states in 114 Sn, by focusing on their decay patterns. In the present experiment, transitions at 856.2-keV and 1405.0-keV, which were observed in an earlier β + decay study but not placed in the 114 Sn level scheme, have been Physics, assigned to the level scheme in connection to the 0$^+_3$ level at 2156.0-keV. Properly assigning these transitions refines the level scheme and enhances our understanding of the nuclear structure in 114 Sn.

GRIFFIN↗

First observation of a shape isomer and a low-lying strongly-coupled prolate band in neutron-deficient semi-magic 187 Pb

Prompt and delayed gamma-ray spectroscopy of the neutron-deficient, semi-magic isotope 187Pb has been performed using the recoil-decay and isomer-decay tagging techniques at the Argonne Gas-Filled Analyzer. A new 5.15(15)-mu s isomeric state at only 308 keV above the spherical 3/2 - ground state is identified and classified as a shape isomer. A strongly-coupled band is observed on top of the isomer, which is nearly identical to the one built on the prolate 7/2 - [514] Nilsson state in the isotone 185 Hg. Based on this similarity and on the result of the potential-energy surface calculations, the new isomer in 187 Pb is proposed to originate from the same configuration. The retarded character of the 308-keV (7/2( - )→ 3/2$_{gs}^{-}$ transition with a deduced B(E2) = 5.6(2) x 10 -4 W.u. can be well explained by the significant difference between the prolate parent and spherical daughter configurations, leading to the shape isomerism. The excitation energy of the isomer is surprisingly low, being roughly half of the excitation energies of the known 0 + intruder bandheads in the neighboring 186,188 Pb isotopes. The combined results of the present work and the previous alpha-decay and laser spectroscopy studies present evidence for triple shape coexistence at low energy in the negative-parity configurations of 187 Pb, which is well reproduced by the potential-energy surface calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of deformed intruder structures along the N=50 magic number: Insights from 83 Se

The 83 Se nucleus was studied in the context of shape coexistence employing a 82 Se(d,p) 83 Se reaction performed in inverse kinematics with the GALILEO-II + SPIDER setup to reach the desired selectivity on the reaction channel of interest via γ -particle coincidences. The lifetimes of the 1/2 + 540-keV and 3/2$^{+}_{3}$ 1100-keV low-lying intruder states of 83 Se were measured for the first time by employing the Recoil Distance Doppler Shift and the Doppler Shift Attenuation Method. The deduced transition probabilities, together with the mixing ratios obtained from a separate neutron-capture experiment performed at ILL with the FIPPS array, are compared and discussed in the framework of shell-model calculations performed with the PFSDG-U Hamiltonian. Large transition probabilities of hundreds of e 2 fm 4 were found for the E 2 decays of the states built on top of the intruders, pointing to the development of quadrupole collectivity and large deformation in the proximity of N = 50 shell closure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

How some tropical trees benefit from being struck by lightning: evidence for Dipteryx oleifera and other large‐statured trees

Lightning strikes kill hundreds of millions of trees annually, but their role in shaping tree life history and diversity is largely unknown. Here, in this study, we use data from a unique lightning location system to show that some individual trees counterintuitively benefit from being struck by lightning. Lightning killed 56% of 93 directly struck trees and caused an average of 41% crown dieback among the survivors. However, among these struck trees, 10 direct strikes caused negligible damage to Dipteryx oleifera trees while killing 78% of their lianas and 2.1 Mg of competitor tree biomass. Nine trees of other long-lived taxa survived lightning with similar benefits. On average, a D. oleifera tree > 60 cm in diameter is struck by lightning at least five times during its lifetime, conferring these benefits repeatedly. We estimate that the ability to survive lightning increases lifetime fecundity 14-fold, largely because of reduced competition from lianas and neighboring trees. Moreover, the unusual heights and wide crowns of D. oleifera increase the probability of a direct strike by 49–68% relative to trees of the same diameter with average allometries. These patterns suggest that lightning plays an underappreciated role in tree competition, life history strategies, and species coexistence.

competition↗

The effects of allelochemical transfer on the dynamics of hosts, parasitoids, and competing hyperparasitoids

Allelochemicals produced by plants may be ingested by herbivorous insects and transferred to higher trophic levels with potentially deleterious effects. We develop a system of differential equations to investigate the effect of the transfer of allelochemicals, such as nicotine, on the population dynamics of a system of hosts, parasitoids, and two competing hyperparasitoids that attack different life stages of the parasitoids. We find both somewhat deleterious effects of nicotine on the larvae-attacking hyperparasitoids and increased attack rates for the pupae-attacking hyperparasitoids can promote coexistence. We also use an evolutionary game-theoretic approach to determine the optimal distribution of hyperparasitoid attacks among nicotine-producing and nicotine-free plants. With strong deleterious effects of nicotine and increased attack rates for the pupae-attacking hyperparasitoid, we find both species attack parasitoids on the nicotine-free plant but only pupae-attacking hyperparasitoids attack parasitoids on the nicotine-producing plant.

59 BASIC BIOLOGICAL SCIENCES↗

Lifetimes of low-lying levels in 158 Gd

The low-lying structure of the well-deformed nucleus 158 Gd has been revisited to elucidate the nature of the low-lying states in 158 Gd. Earlier (p, t) studies identified numerous 0 + states below 4.3 MeV, prompting questions about whether these states correspond to collective vibrations or shape coexistence. New and previously reported (n, n' γ) measurements are combined, including γ-γ coincidences, excitation functions, and angular distributions, to extract lifetimes and transition probabilities for 44 excited states up to 2.7 MeV, including 32 previously unmeasured levels. Our results confirm or revise γ-ray placements and provide detailed transition strengths, revealing both weakly collective and strongly enhanced B(E2) and B(E1) transition probabilities. In particular, a tentative 0 + state at 2437.8 keV exhibits a strong interband B(E2) transition, which may be a candidate for a possible two-phonon (ββ) excitation. Systematic comparisons with neighboring Gd isotopes, Hartree–Fock–Bogoliubov, and interacting-boson model predictions suggest that the first excited 0 + state in 158 Gd is predicted to be a β-vibration, although it is weakly collective.

158Gd↗

Materials Design Directions for Solar Thermochemical Water Splitting

The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.

08 HYDROGEN↗

Engineering of Ferroic Orders in Thin Films by Anionic Substitution

Multiferroics are a unique class of materials where magnetic and ferroelectric orders coexist. The research on multiferroics contributes significantly to the fundamental understanding of the strong correlations between different material degrees of freedom and provides an energy-efficient route toward the electrical control of magnetism. While multiple ABO 3 oxide perovskites are identified as being multiferroic, their magnetoelectric coupling strength is often weak, necessitating the material search in different compounds. Here, the observation of room-temperature multiferroic orders in multi-anion SrNbO 3-x N x thin films is reported. In these samples, the multi-anion state enables the room-temperature ferromagnetic ordering of the Nb d-electrons. Simultaneously, ferroelectric responses that originate from the structural symmetry breaking associated are found with both the off-center displacements of Nb and the geometric displacements of Sr, depending on the relative O-N arrangements within the Nb-centered octahedra. So findings not only diversify the available multiferroic material pool but also demonstrate a new multiferroism design strategy via multi-anion engineering.

thin-films↗

Tailoring Disordered/Ordered Phases to Revisit the Degradation Mechanism of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathode Materials

Abstract In the spinel oxide cathode family, LiNi 0.5 Mn 1.5 O 4 (LNMO) shows a high operating voltage (≈4.7 V vs Li/Li + ) and excellent Li‐ion mobility with stable 3D conducting channels. Ni/Mn cation disordered and ordered phases usually coexist in LNMO materials, and they have distinct structural and electrochemical properties, resulting in different battery performances for LNMO materials with different phase compositions. Identifying the correlation between phase compositions and electrochemical properties is of significance to the improvement of battery performance and understanding of degradation mechanisms. Herein, the disordered/ordered phase compositions in LNMO materials are tailored by post‐annealing strategies and their impacts on electrochemical performance and degradation mechanisms from the surface to the bulk are systematically investigated. The ordered phase increases rapidly as Mn 3+ is oxidized to Mn 4+ through a post‐annealing process. LNMO with an intermediate fraction of disordered and ordered phases gives rise to improved cycling stability. This article further reports that a high ordered phase fraction can preferentially protect Ni from dissolution during cycling. However, these results suggest that the transition metal dissolution and surface structural change of LNMO do not exhibit a direct correlation with cycling stability. These results indicate the capacity fading mainly correlates with the bulk structural distortion, leading to decreased Li‐ion kinetics.

36 MATERIALS SCIENCE↗

Decoding the Broadband Emission of 2D Pb-Sn Halide Perovskites through High-Throughput Exploration

Unlike single-component 2D metal halide perovskites (MHPs) exhibiting sharp excitonic photoluminescence (PL), a broadband PL emerges in mixed Pb-Sn 2D lattices. Two physical models –self-trapped exciton and defect-induced Stokes-shift – are proposed to explain this unconventional phenomenon. However, the explanations provide limited rationalizations without consideration of the formidable compositional space, and thus, the fundamental origin of broadband PL remains elusive. Herein, the high-throughput automated experimental workflow is established to systematically explore the broadband PL in mixed Pb-Sn 2D MHPs, employing PEA (Phenethylammonium) as a model cation known to work as a rigid organic spacer. Spectrally, the broadband PL becomes further broadened with rapid PEA 2 PbI 4 phase segregation with increasing Pb concentrations during early-stage crystallization. Counterintuitively, MHPs with high Pb concentrations exhibit prolonged PL lifetimes. Hyperspectral microscopy identifies substantial PEA 2 PbI 4 phase segregation in those films, hypothesizing that the establishment of charge transfer excitons by the phase segregation upon crystallization at high-Pb compositions results in distinctive PL properties. In conclusion, these results indicate that two independent mechanisms—defect-induced Stoke-shifts and the establishment of charge transfer excitons by phase segregation—coexist which significantly correlates with the Pb:Sn ratio, thereby simultaneously contributing to the broadband PL emission in 2D mixed Pb-Sn HPs.

2D Pb-Sn halide perovskites↗

Universal Superconductivity in FeTe and All‐Iron‐Based Ferromagnetic Superconductor Heterostructures

Abstract Ferromagnetism (FM) and superconductivity (SC) are two of the most famous macroscopic quantum phenomena. However, nature normally does not allow SC and FM to coexist without significant degradation. Here, the first fully iron‐based SC/FM heterostructures, composed of Fe(Te,Se) and Fe 3 GeTe 2 , are introduced, and it is shown that this system exhibits both strong FM and high‐temperature SC with an atomically sharp interface. From this study, it is also discovered that minute level of various cationic dopants can drive otherwise non‐superconducting FeTe films into a SC state. This suggests that the ground state of FeTe is so close to the SC state that it can be driven in and out of the SC state with various other perturbations. Altogether, this shows that Fe‐Te‐based heterostructures provide a unique opportunity to manipulate magnetism, superconductivity, and topological physics, paving the way toward new superconducting technologies.

36 MATERIALS SCIENCE↗

Selenium Migration and Local Structures in Cu‐Doped CdSeTe Solar Cells after Aging

Selenium grading plays a critical role in state-of-the-art Cadmium Telluride photovoltaic cells by enhancing long-wavelength absorption and extending minority carrier lifetimes —key to enabling the current performance record of 23.08%. However, very little is understood about selenium motion. In this study, a comprehensive, multimodal, and multiscale approach is employed to investigate Se migration and local structural changes in copper (Cu)-doped CdSeTe solar cells subjected to accelerated stress. X-ray fluorescence (XRF) microscopy shows unexpected levels of Se diffusion after 500 h under heat (75°C) and light (0.8 suns, 80 mW/cm 2 ), suggesting the coexistence of fast and slow diffusion channels even at low temperatures, with unexpectedly low activation energies (<0.85 eV). X-ray Absorption Near Edge Structure (XANES) analysis indicates a preferential migration of Se atoms to anionic lattice sites and a reduction in Se-Cl co-passivation at Te-terminated dislocation cores. Furthermore, these findings point to a reconfiguration of Se local environments and highlight the potential role of extended structural defects in enabling Se transport at low temperatures. Additionally, XANES results suggest that the presence of metallic Cu across the absorber layer may contribute to back-contact degradation and reduced hole density in both fresh and aged devices.

14 SOLAR ENERGY↗

Fractional Skyrmion Tubes in Chiral‐Interfaced 3D Magnetic Nanowires

Magnetic skyrmions are chiral spin textures with rich physics and great potential for unconventional computing. Typically, skyrmions form in bulk crystals with reduced symmetry or ultrathin film multilayers involving heavy metals. Here, the formation of fractional Bloch skyrmion tubes at room temperature is demonstrated by 3D printing ferromagnetic double‐helix nanowires with two regions of opposite chirality. Using X‐ray microscopy and micromagnetic simulations, it is shown that the coexistence of vortex and anti‐parallel spin states induces the formation of fractional skyrmion tubes at zero magnetic fields, minimizing the energy cost of breaking the coupling between geometric and magnetic chirality. Control over zero‐field states is also demonstrated, including pure vortex, or mixed skyrmion‐vortex states, highlighting the magnetic reconfigurability of these 3D nanowires. This work shows how interfacing chiral geometries at the nanoscale can enable advanced forms of topological spintronics.

X-ray microscopy↗

Visualizing Tailored Spin Phenomena in a Reduced‐Dimensional Topological Superlattice

Abstract Emergent topological insulators (TIs) and their design are in high demand for manipulating and transmitting spin information toward ultralow‐power‐consumption spintronic applications. Here, distinct topological states with tailored spin properties can be achieved in a single reduced‐dimensional TI‐superlattice, (Bi 2 /Bi 2 Se 3 )‐(Bi 2 /Bi 2 Se 3 ) N or (□/Bi 2 Se 3 )‐(Bi 2 /Bi 2 Se 3 ) N ( N is the repeating unit, □ represents an empty layer) by controlling the termination via molecular beam epitaxy. The Bi 2 ‐terminated superlattice exhibits a single Dirac cone with a spin momentum splitting ≈0.5 Å −1 , producing a pronounced inverse Edelstein effect with a coherence length up to 1.26 nm. In contrast, the Bi 2 Se 3 ‐terminated superlattice is identified as a dual TI protected by coexisting time reversal and mirror symmetries, showing an unexpectedly long spin lifetime up to 1 ns. The work elucidates the key role of dimensionality and dual topological phases in selecting desired spin properties, suggesting a promise route for engineering topological superlattices for high‐performance TI‐spintronic devices.

Sun, Rui↗

Epitaxial Ferroelectric Hf 0.5 Zr 0.5 O 2 with Metallic Pyrochlore Oxide Electrodes

The synthesis of fully epitaxial ferroelectric Hf 0.5 Zr 0.5 O 2 (HZO) thin films through the use of a conducting pyrochlore oxide electrode that acts as a structural and chemical template is reported. Such pyrochlores, exemplified by Pb 2 Ir 2 O 7 (PIO) and Bi 2 Ru 2 O 7 (BRO), exhibit metallic conductivity with room-temperature resistivity of <1 mΩ cm and are closely lattice matched to yttria-stabilized zirconia substrates as well as the HZO layers grown on top of them. Evidence for epitaxy and domain formation is established with X-ray diffraction and scanning transmission electron microscopy, which show that the c-axis of the HZO film is normal to the substrate surface. The emergence of the non-polar-monoclinic phase from the polar-orthorhombic phase is observed when the HZO film thickness is ≥≈30 nm. Furthermore, thermodynamic analyses reveal the role of epitaxial strain and surface energy in stabilizing the polar phase as well as its coexistence with the non-polar-monoclinic phase as a function of film thickness.

36 MATERIALS SCIENCE↗

Strain‐Driven Mixed‐Phase Domain Architectures and Topological Transitions in Pb 1− x Sr x TiO 3 Thin Films

Abstract The potential for creating hierarchical domain structures, or mixtures of energetically degenerate phases with distinct patterns that can be modified continually, in ferroelectric thin films offers a pathway to control their mesoscale structure beyond lattice‐mismatch strain with a substrate. Here, it is demonstrated that varying the strontium content provides deterministic strain‐driven control of hierarchical domain structures in Pb 1− x Sr x TiO 3 solid‐solution thin films wherein two types, c / a and a 1 / a 2 , of nanodomains can coexist. Combining phase‐field simulations, epitaxial thin‐film growth, detailed structural, domain, and physical‐property characterization, it is observed that the system undergoes a gradual transformation (with increasing strontium content) from droplet‐like a 1 / a 2 domains in a c / a domain matrix, to a connected‐labyrinth geometry of c / a domains, to a disconnected labyrinth structure of the same, and, finally, to droplet‐like c / a domains in an a 1 / a 2 domain matrix. A relationship between the different mixed‐phase modulation patterns and its topological nature is established. Annealing the connected‐labyrinth structure leads to domain coarsening forming distinctive regions of parallel c / a and a 1 / a 2 domain stripes, offering additional design flexibility. Finally, it is found that the connected‐labyrinth domain patterns exhibit the highest dielectric permittivity.

Kavle, Pravin↗

Size‐Induced Ferroelectricity in Antiferroelectric Oxide Membranes

Abstract Despite extensive studies on size effects in ferroelectrics, how structures and properties evolve in antiferroelectrics with reduced dimensions still remains elusive. Given the enormous potential of utilizing antiferroelectrics for high‐energy‐density storage applications, understanding their size effects will provide key information for optimizing device performances at small scales. Here, the fundamental intrinsic size dependence of antiferroelectricity in lead‐free NaNbO 3 membranes is investigated. Via a wide range of experimental and theoretical approaches, an intriguing antiferroelectric‐to‐ferroelectric transition upon reducing membrane thickness is probed. This size effect leads to a ferroelectric single‐phase below 40 nm, as well as a mixed‐phase state with ferroelectric and antiferroelectric orders coexisting above this critical thickness. Furthermore, it is shown that the antiferroelectric and ferroelectric orders are electrically switchable. First‐principle calculations further reveal that the observed transition is driven by the structural distortion arising from the membrane surface. This work provides direct experimental evidence for intrinsic size‐driven scaling in antiferroelectrics and demonstrates enormous potential of utilizing size effects to drive emergent properties in environmentally benign lead‐free oxides with the membrane platform.

36 MATERIALS SCIENCE↗

Topological Spin Textures in an Insulating van der Waals Ferromagnet

Generation and control of topological spin textures constitutes one of the most exciting challenges of modern spintronics given their potential applications in information storage technologies. Of particular interest are magnetic insulators, which due to low damping, absence of Joule heating and reduced dissipation can provide energy-efficient spin-textures platform. Here, it is demonstrated that the interplay between sample thickness, external magnetic fields, and optical excitations can generate a prolific paramount of spin textures, and their coexistence in insulating CrBr 3 van der Waals (vdW) ferromagnets. Using high-resolution magnetic force microscopy and large-scale micromagnetic simulation methods, the existence of a large region in T-B phase diagram is demonstrated where different stripe domains, skyrmion crystals, and magnetic domains exist and can be intrinsically selected or transformed to each-other via a phase-switch mechanism. Lorentz transmission electron microscopy unveils the mixed chirality of the magnetic textures that are of Bloch-type at given conditions but can be further manipulated into Néel-type or hybrid-type via thickness-engineering. The topological phase transformation between the different magnetic objects can be further inspected by standard photoluminescence optical probes resolved by circular polarization indicative of an existence of exciton-skyrmion coupling mechanism. The findings identify vdW magnetic insulators as a promising framework of materials for the manipulation and generation of highly ordered skyrmion lattices relevant for device integration at the atomic level.

36 MATERIALS SCIENCE↗