Results for “computer simulation model development” — Page 19

DOE OSTI2023

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Lignin Utilization

Valorization of lignin has massive potential economic and sustainability benefits for the lignocellulosic biorefinery. However, challenges remain to realize lignin conversion to coproducts, especially related to selective, high yield depolymerization to monomers and quantitative analytics on lignin, the latter of which is critical for accurate process modeling. Towards these goals, the Lignin Utilization project focuses on catalytic lignin deconstruction chemistries for C-O and C-C bond cleavage, development of analytical chemistry techniques to quantitatively characterize lignin, and syntheses of requisite model compounds for understanding lignin transformations. This work is done with and supports multiple BETO projects, including the Biological Lignin Valorization (BLV) project, the Separations Consortium, and others. Outcomes of Lignin Utilization for analytics and synthesis include 1) development of new mass spectrometry (MS) methods to characterize lignin dimers/oligomers in process streams, 2) deployment of a computational-experimental tool (with Biochemical Process Modeling and Simulation) to identify lignin-derived compounds with high fidelity from MS, and 3) delivery of >40 unique compounds. From a catalysis perspective, we have developed new oxidative approaches to cleave C-O and C-C bonds and produce >50% bio-available aromatic monomers for biological funneling for the BLV project and have developed recoverable bases for base-catalyzed deconstruction of lignin.

BIOMASS FUELS↗

DOE OSTI2026

Full-wave modeling of RF waves in fusion plasmas with finite element method: Progress in past decades and its future role

This paper reviews the progress in computing radio frequency (RF) wave fields in fusion plasmas, specifically focusing on simulations utilizing the finite element method (FEM) over the past few decades. Computing RF wave fields in fusion plasmas presents unique challenges due to large simulation domains, complex antenna structures, non-local dielectric properties, and wide ranges of spatial scales. It highlights key developments and outlines future directions, primarily addressing waves in the ion cyclotron (IC) to lower hybrid (LH) frequency range. We begin with briefly revisiting earlier developments before the widespread availability of modern computer-aided engineering (CAE) software based on FEM. This historical perspective illuminates early progress and the physics difficulties that motivated ongoing work within the community. Modern wave simulations for RF antennas based on FEM are characterized by the use of detailed 3D antenna model geometry generated from engineering CAD software and localized wave dielectric model. Significant advancements have also been made in improving physics models to include phenomena such as RF sheath rectification and wave scattering. FEM-based RF simulations have also been applied to compute wave propagation in the core region, where the inclusion of non-local dielectric response is crucial. This is a challenging goal, and several promising approaches have been proposed in this area. Additionally, RF simulation development initiatives based on open-source libraries have gained popularity, demonstrating scalability and flexibility in extending physics models. This paper will discuss the advantages and disadvantages of using such a publicly available FEM library.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Level-set Modeling Simulations of Chemical Vapor Infiltration for Ceramic Matrix Composites Manufacturing

Silicon-carbide (SiC) reinforced ceramic matrix composites (CMCs) are a key enabling technology to reduce fuel consumption and emissions of gas turbine engines. In one manufacturing approach, chemical vapor infiltration (CVI) is limited to only coating SiC fibers. The preform is then fabricated using a lay-up of basic plys or 2-D woven sheets composed of the precoated fibers. At the other extreme, CVI is used to completely densify a 3-D woven preform shaped almost like the gas turbine component itself. The latter approach is more suitable for highly engineered components which sit directly in the gas path of the engine, for example, a high pressure turbine blade. In this case, the geometry is necessarily complex for aerodynamic, stress, and lifing (multi-physics) requirements. Presently, optimizing the CVI-dominated manufacturing approach is largely by trial-and-error. In this work, a first-principles modeling of CVI is performed to realize optimization of SiC/SiC CMC manufacturing. The modeling is based on a level-set framework to describe the interface between the vapor and solid phases. A finite-difference numerical scheme using an immersed boundary method is developed for fixed, structured meshes. Massively parallel direct numerical simulations (DNS) of CVI through fiber-woven geometries are performed using one-step chemistry, and over a range of Thiele moduli. Illustrative applications of the resulting large DNS data sets are given, including the development of fiber-weave specific infiltration models and structure functions for mean-field (porous media) Computational Fluid Dynamics (CFD) simulations of CVI.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Modeling and simulation of transitional Rayleigh–Taylor flow with partially averaged Navier–Stokes equations

In this work, the partially averaged Navier–Stokes (PANS) equations are used to predict the variable-density Rayleigh–Taylor (RT) flow at Atwood number 0.5 and maximum Reynolds number 500. This is a prototypical problem of material mixing, featuring laminar, transitional, and turbulent flow, instabilities and coherent structures, density fluctuations, and production of turbulence kinetic energy by both shear and buoyancy mechanisms. These features pose numerous challenges to modeling and simulation, making the RT flow ideal to develop the validation space of the recently proposed PANS Besnard–Harlow–Rauenzahn-linear eddy viscosity model closure. The numerical simulations are conducted at different levels of physical resolution and test three approaches to set the parameters $f_\phi$ defining the range of physically resolved scales. The computations demonstrate the efficiency (accuracy vs cost) of the PANS model predicting the spatiotemporal development of the RT flow. Results comparable to large-eddy simulations and direct numerical simulations are obtained at significantly lower physical resolution without the limitations of the Reynolds-averaged Navier–Stokes equations in these transitional flows. The data also illustrate the importance of appropriate selection of the physical resolution and the resolved fraction of each dependent quantity $\phi$ of the turbulent closure, $f_\phi$. These two aspects determine the ability of the model to resolve the flow phenomena not amenable to modeling by the closure and, as such, the computations’ fidelity.

Navier Stokes equations↗

DOE OSTI2019

Active Subspace Methods for Data-Intensive Inverse Problems (Final Report)

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2019

Active Subspace Methods for Data-Intensive Inverse Problems

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2018

Dual-Purpose Canister Filling Demonstration Project Progress Report, Rev. 1

This report discusses the initial progress made at the Oak Ridge National Laboratory to support direct disposal of dual-purpose canisters (DPCs)using filler materials to demonstrate that the probability of criticality in DPCs during disposal to be below the probability for inclusion in a repository performance assessment. In the initial phase of a multi-phase effort that will result in a full-scale demonstration, a computational fluid dynamics (CFD) model was developed to gauge the filling process and to uncover any unforeseen issues. The initial filling simulations of the lower region (mouse holes) of a prototypic DPC show successful removal of the inner space voids and smooth,even progression of the liquid level. In the initial phase, flow through a pipe that is similar to the drain pipe in a DPC will be investigated separately to gain valuable insight of flow regime inside a pipe. The initial experimental setups for validating the computational filling model have been designed,and the various assembly parts are being procured. The experience gained from the initial experiments will be applied to the next steps toward a full-scale demonstration and to the validation of multiphysics filling simulation models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2019

Dual-Purpose Canister Filling Demonstration Project Progress Report

This report discusses the initial progress made at the Oak Ridge National Laboratory to support direct disposal of dual-purpose canisters (DPCs) using filler materials to demonstrate that the probability of criticality in DPCs during disposal to be below the probability for inclusion in a repository performance assessment. In the initial phase of a multi-phase effort that will result in a full-scale demonstration, a computational fluid dynamics (CFD) model was developed to gauge the filling process and to uncover any unforeseen issues. The initial filling simulations of the lower region (mouse holes) of a prototypic DPC show successful removal of the inner space voids and smooth, even progression of the liquid level. In the initial phase, flow through a pipe that is similar to the drain pipe in a DPC will be investigated separately to gain valuable insight of flow regime inside a pipe. The initial experimental setups for validating the computational filling model have been designed, and the various assembly parts are being procured. The experience gained from the initial experiments will be applied to the next steps toward a full-scale demonstration and to the validation of multiphysics filling simulation models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Dual-Purpose Canister Filling Demonstration Project Progress Report

This report discusses the initial progress made at the Oak Ridge National Laboratory to support direct disposal of dual-purpose canisters (DPCs) using filler materials to demonstrate that the probability of criticality in DPCs during disposal to be below the probability for inclusion in a repository performance assessment. In the initial phase of a multi-phase effort that will result in a full-scale demonstration, a computational fluid dynamics (CFD) model was developed to gauge the filling process and to uncover any unforeseen issues. The initial filling simulations of the lower region (mouse holes) of a prototypic DPC show successful removal of the inner space voids and smooth, even progression of the liquid level. In the initial phase, flow through a pipe that is similar to the drain pipe in a DPC will be investigated separately to gain valuable insight of flow regime inside a pipe. The initial experimental setups for validating the computational filling model have been designed, and the various assembly parts are being procured. The experience gained from the initial experiments will be applied to the next steps toward a full-scale demonstration and to the validation of multiphysics filling simulation models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Development of a multiphase PIC model for slurry flow modeling

MFIX-Exa is a recently released multiphase CFD code originally developed for the simulation of particle-laden gas-solid flows. Due to its high-performance computing capabilities, MFIX-Exa is an ideal candidate for scale-up studies of slurry reactors, specifically the coarse-grained particle-in-cell (PIC) model with its statistical treatment of the particle phase. Unfortunately, several physical models that were neglected during original development because they are not relevant for high-density ratio gas-solid flows are important in slurry flows where the particle-to-fluid density ratio is near unity. In this preliminary work we focus on the effective (suspension) viscosity. The models of Brinkman (1952), Krieger and Dougherty (1956), and Cheng and Law (2003) are considered. The impact of the effective viscosity model is studied on horizontal pipe flow. The experimental data of Gillies et al. (2002) is used to assess the pressure drop predictions.

Fullmer, William D.↗

DOE OSTI2018

Machine Learning Algorithms for Matching Theories, Simulations, and Observations in Cosmology (Final Project)

The search for simple and elegant equations to explain and predict observable natural phenomena has been a driving force in scientific theory for several centuries. The great successes of Newton's laws, Maxwell's equations, the Schrodinger equation, and the theory of General Relativity have encouraged this perspective, and perhaps a beautiful equation comprising a “theory of everything” remains to be discovered. But now scientists are grappling with systems of ever-increasing complexity, fraught with nonlinearity, and with the quantities of interest often only indirectly observed. Nature may resist a simple description, and the most important discoveries of the next century may be complex theories with countless variables and parameters. The era of big data opens up a promising new approach to scientific discovery in this setting. The predictions of modern theories, even if complex or nonlinear, can be examined through detailed and computationally-intensive simulations that take days or weeks to run and fill petabytes of disk space. The upcoming generation of scientific instruments will provide petabytes of observations at unprecedented resolution and depth. The challenge is to compare data to simulations so as to test theories and identify those that best match the observations. The data are numerous and rich but are subject to noise and various systematic biases. The simulations are large and detailed but are so costly that the effective sample size is small. Moreover, the mapping from data to simulation to the parameters of interest is typically complicated and ill-conditioned. Although these challenges, and the solutions we propose, apply across the sciences, we will ground our efforts by focusing on cosmology. Here, we are truly entering the era of big data in several senses. Ever larger experiments survey larger and larger cosmological volumes, resulting in enormous amounts of pixel data to process and extract the information of cosmological interest. These include large imaging surveys, which collect all the light in broad wavelength ranges over significant fractions of the sky, and spectroscopic surveys, which measure the light as a function of wavelength to map out 3D distances. These experiments are designed to shed light on the big unanswered questions in cosmology. Distilling the petabytes of data into observed quantities for comparison with theory is a daunting task. But these large experiments do not only result in large amounts of data to analyze: if we wish to compare to theories of physics, then we need increasingly extensive predictions for the observed quantities as well, which requires ever-larger cosmological simulations that take substantial -- and at times prohibitive -- computational resources to produce. Our goal is to develop statistical and machine learning methods for using observed and simulated data to advance machine learning with applications cosmology. In particular, we focus our research efforts on the following tasks: The challenge for automated science is that it is computationally impossible and statistically dangerous to consider every possible model in order to find the best one. We will develop Bayesian Optimization based active-learning methods that accelerate both the execution of the simulations and the search for best-fitting parameters. The key idea is to make the simulations adaptive -- across resolutions, time, and parameters -- using the data to search as the simulation runs; Most ML methods operate on simple finite dimensional feature vectors. However, many cosmology and other science applications require ML methods that can operate on more complex objects as inputs or outputs such as functions, distributions, or sets and point clouds. Our goal is to develop efficient ML methods for this problem and demonstrate their applicability in Cosmology, Astrophysics, and other science problems.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Simulating Catalysis with Realistic Pellet Geometries Using Mesoflow: A Case Study of Catalytic Propane Dehydrogenation

We present a case study of catalytic propane dehydrogenation with our open-source multiphysics solver, Mesoflow. The solver was developed to simulate reactive flow coupled to heterogeneous catalytic reactions and deactivation in the context of complex, mesoscale geometry. The method leverages cartesian block-structured adaptive mesh refinement to capture realistic catalyst microstructural features acquired directly from X-ray computed tomography data. A kinetic model for propane dehydrogenation and catalyst deactivation was developed based on temporal analysis of products (TAP) reactor experiments. The TAP reactor experiments allow for precise characterization of intrinsic kinetic reaction steps which are implemented into Mesoflow simulations to model the spatial and temporal evolution of reactants, products, and catalyst active sites. The short-term and long-term deactivation behavior is studied by using XCT data collected from fresh and aged catalyst pellets, which exhibit different microstructural features. This study employs time-splitting algorithms to connect disparate reaction and flow timescales, enabling the simulations to achieve realistic deactivation timescales on the order of minutes while the flow time-scales for small particles (100 microns) are several milliseconds. We also introduce a flexible automated python script that writes the necessary files to construct a Mesoflow simulation from user-created chemical mechanisms. We will also introduce a few new features that are added to Mesoflow such as higher order schemes, implicit chemistry integrators and the ability to run on AMD and NVIDIA graphics-processing-units.

AMReX↗

DOE OSTI2025

Insight into the deformation features and capacity loss mechanisms of lithium-ion pouch cells under spherical indentation conditions

Mechanical deformation under extreme conditions is one of the important reasons for the failure of lithium-ion batteries in automotive application. However, the deformation features and component failure of lithium-ion cells to external loading has never been a design consideration. Here, in this study, we conduct spherical indentation tests on a dozen of lithium-ion cells with different capacities under different control mode conditions to investigate their deformation features and capacity loss mechanisms. The experimental results show that, under mechanical deformation conditions, internal faults of cells occur in stages, and energy accumulation and sudden release are two key processes of cell's mechanical failure. The cells' state of charge is the main factor affecting their thermal runaway behaviors. In addition, a finite element model is developed to simulate the deformation features and the failure mechanism of key components of lithium-ion pouch cells; the 3D x-ray computed tomography is employed to demonstrate its internal configuration. With this model, the force-strain response, the deformation features as well as the size of the failure area of lithium-ion cells under spherical indentation conditions are accurately predicted. In 3D x-ray computed tomography images, unique mud cracks in cooper current collector are observed, and the influence mechanisms of the isolated fragments on the cell capacities are revealed. These results may provide useful information for the mechanical structure design of the components of lithium-ion pouch cells.

25 ENERGY STORAGE↗

DOE OSTI2019

Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V

The build-up of residual stresses in a part during laser powder bed fusion provides a significant limitation to the adoption of this process. These residuals stresses may cause a part to fail during a build or fall outside the specified tolerances after fabrication. In the present work a thermomechanical model is used to simulate the build process and calculate the residual stress state for Ti–6Al–4V specimens built with continuous and island scan strategies. A layer agglomeration, or lumping, approach is used to speed up the computations. A material model is developed to naturally capture the strain-rate dependence and annealing behavior of Ti–6Al–4V at elevated temperatures. Conclusions from the thermomechanical simulations showed good agreement with synchrotron X-ray diffraction measurements used to determine the residual elastic strains in these parts. Yet, the experimental measurements showed higher residual strains for the specimen built with an island scan strategy; a trend not fully captured by the simulations. Parameter studies were performed to fully understand the advantages and limitations of the current simulation methodology. Reasons for both the computational and experimental findings are discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Identifying Entangled Physics Relationships Through Sparse Matrix Decomposition to Inform Plasma Fusion Design

We report a sustainable burn platform through inertial confinement fusion (ICF) has been an ongoing challenge for over 50 years. Mitigating engineering limitations and improving the current design involves an understanding of the complex coupling of physical processes. While sophisticated simulation codes are used to model ICF implosions, these tools contain necessary numerical approximation but miss physical processes that limit predictive capability. Identification of relationships between controllable design inputs to ICF experiments and measurable outcomes (e.g., neutron yield, neutron velocity, areal density) from performed experiments can help guide the future design of experiments and development of simulation codes, to potentially improve the accuracy of the computational models used to simulate ICF experiments. We use sparse matrix decomposition methods to identify clusters of a few related design variables. Sparse principal component analysis (SPCA) identifies groupings that are related to the physical origin of the variables (laser, hohlraum, and capsule). A variable importance analysis finds that in addition to variables highly correlated with neutron yield, such as picket power and laser energy, variables that represent a dramatic change of the ICF design, such as number of pulse steps, are also very important. The obtained sparse components are then used to train a random forest (RF) regression surrogate for predicting total yield. The RF performance on the training and testing data compares with the performance of the RF trained using all the design variables considered. This work is intended to inform design changes in future ICF experiments by augmenting the expert intuition and simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

A simplified parameterization of isoprene-epoxydiol-derived secondary organic aerosol (IEPOX-SOA) for global chemistry and climate models: a case study with GEOS-Chem v11-02-rc

Secondary organic aerosol derived from isoprene epoxydiols (IEPOX-SOA) is thought to contribute the dominant fraction of total isoprene SOA, but the current volatility-based lumped SOA parameterizations are not appropriate to represent the reactive uptake of IEPOX onto acidified aerosols. A full explicit modeling of this chemistry is however computationally expensive owing to the many species and reactions tracked, which makes it difficult to include it in chemistry–climate models for long-term studies. Here we present three simplified parameterizations (version 1.0) for IEPOX-SOA simulation, based on an approximate analytical/fitting solution of the IEPOX-SOA yield and formation timescale. The yield and timescale can then be directly calculated using the global model fields of oxidants, NO, aerosol pH and other key properties, and dry deposition rates. The advantage of the proposed parameterizations is that they do not require the simulation of the intermediates while retaining the key physicochemical dependencies. We have implemented the new parameterizations into the GEOS-Chem v11-02-rc chemical transport model, which has two empirical treatments for isoprene SOA (the volatility-basis-set, VBS, approach and a fixed 3% yield parameterization), and compared all of them to the case with detailed fully explicit chemistry. The best parameterization (PAR3) captures the global tropospheric burden of IEPOX-SOA and its spatiotemporal distribution ( R 2 =0.94 ) vs. those simulated by the full chemistry, while being more computationally efficient ( ~5 times faster), and accurately captures the response to changes in NO x and SO 2 emissions. On the other hand, the constant 3 % yield that is now the default in GEOS-Chem deviates strongly ( R 2 =0.66 ), as does the VBS ( R 2 =0.47 , 49% underestimation), with neither parameterization capturing the response to emission changes. With the advent of new mass spectrometry instrumentation, many detailed SOA mechanisms are being developed, which will challenge global and especially climate models with their computational cost. The methods developed in this study can be applied to other SOA pathways, which can allow including accurate SOA simulations in climate and global modeling studies in the future.

58 GEOSCIENCES↗