Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Early Failure of Lithium–Sulfur Batteries at Practical Conditions: Crosstalk between Sulfur Cathode and Lithium Anode

Lithium–sulfur (Li–S) batteries are one of the most promising next-generation energy storage technologies due to their high theoretical energy and low cost. However, Li–S cells with practically high energy still suffer from a very limited cycle life with reasons which remain unclear. Here, through cell study under practical conditions, it is proved that an internal short circuit (ISC) is a root cause of early cell failure and is ascribed to the crosstalk between the S cathode and Li anode. The cathode topography affects S reactions through influencing the local resistance and electrolyte distribution, particularly under lean electrolyte conditions. The inhomogeneous reactions of S cathodes are easily mirrored by the Li anodes, resulting in exaggerated localized Li plating/stripping, Li filament formation, and eventually cell ISC. Manipulating cathode topography is proven effective to extend the cell cycle life under practical conditions. The findings of this work shed new light on the electrode design for extending cycle life of high-energy Li–S cells, which are also applicable for other rechargeable Li or metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Condition-dependent NO x adsorption/desorption over Pd/BEA: A combined microreactor and in situ DRIFTS study

Pd/BEA is chosen as a model passive NO x adsorber (PNA) to elucidate the effect of the feed gas composition on the NO x adsorption/desorption behavior. The Brønsted acid and the partially hydrolyzed framework Al (P-HAl(OH)) sites in HBEA adsorb NO and NO 2 under dry conditions. Moreover, the performance of HBEA is not affected by CO, while CO inhibits nitrate formation and promotes NO adsorption via the Pd(NO)(CO) complexes formation over Pd/BEA. H 2 O inhibits NO adsorption over the Brønsted acid and P-HAl(OH) sites, and ionic Pd is the only active site for NO x adsorption under wet conditions. Furthermore, NO adsorption over hydrated Pd (Pd 2+ (OH)(NO)(H 2 O) 3 ) is weaker than NO adsorption over bare ionic Pd (Z 2 [Pd 2+ (NO)], Z[Pd 2+ (OH)(NO)]). Dehydration of Pd 2+ (OH)(NO)(H 2 O) 3 forms more stable Z[Pd 2+ (OH)(NO)] during desorption. Here, the NO adsorption capacity of Pd/BEA improves in the presence of CO under both dry and wet conditions by forming a stable carbonyl–nitrosyl complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Sulfonate Group Improves the Solubility and Electrocatalytic Performance of Ru‐Based bda‐ and pda‐Type Water Oxidation Catalysts under Neutral Conditions

Four ruthenium water oxidation catalysts that bear carboxylate and sulfonate groups in the active site have been synthesized and analyzed for their catalytic activity. Here, the sulfonate‐containing catalysts show higher electrochemical activity in pH 7 phosphate buffer with 4 times larger catalytic current, improved durability with sacrificial oxidant, and increased solubility compared to similar species containing two carboxylate groups. Density functional theory calculations suggest that the sulfonate group provides a more favorable geometry for water nucleophilic attack, which is both the energetically most favorable mechanism calculated and the experimentally predicted mechanism under electrochemical conditions. Further experimental studies have been performed to show that under certain conditions catalysts can perform well electrochemically under pH conditions as low as 1.6 and that various structural components can greatly change solubility and catalytic operation.

14 SOLAR ENERGY↗
DOE OSTI2022

Characterization of ambient polychlorinated biphenyl background conditions in surface waters of the Pajarito Plateau, New Mexico

Abstract This study presents the development of polychlorinated biphenyl (PCB) background threshold values (BTVs) that statistically characterize ambient background conditions for surface waters in undeveloped and developed landscapes of the Pajarito Plateau in the Rio Grande Basin of New Mexico. Between 2009 and 2018, surface water data were collected at 45 locations under a variety of flow conditions and regimes. A total of 163 samples were collected, with roughly 1/3 of samples and locations being in undeveloped areas (n = 53 from 17 locations), and the remainder being in developed areas (n = 110 from 28 locations). While there are areas on the Pajarito Plateau where PCB point sources are known or likely to have contributed to PCBs in soils, PCB BTVs calculated for undeveloped portions of watersheds (upstream of areas where PCB point sources are known or likely to have contributed to PCBs in soils, and therefore not affected by PCB sources within the watershed) are well above New Mexico's human health organism-only (HH-OO) water quality criterion (0.64 ng/L). Background threshold values are even higher in developed areas upstream of managed soil sites, suggesting that in developed areas, both diffuse ambient PCB sources (e.g., atmospheric deposition) and localized urban sources (e.g., building materials, paints, and electrical equipment) contribute to PCBs in those watersheds. These findings indicate that New Mexico's current HH-OO water quality criterion for PCBs cannot practicably be met due to ambient conditions. It is also impracticable to meet the US Environmental Protection Agency (EPA) criterion continuous concentration (CCC) of 14 ng/L in developed background areas, where the BTV is approximately 1.5 times the CCC. Integr Environ Assess Manag 2023;19:1307–1319. © 2022 SETAC

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The denatured state of HIV ‐1 protease under native conditions

Abstract The denatured state of several proteins has been shown to display transient structures that are relevant for folding, stability, and aggregation. To detect them by nuclear magnetic resonance (NMR) spectroscopy, the denatured state must be stabilized by chemical agents or changes in temperature. This makes the environment different from that experienced in biologically relevant processes. Using high‐resolution heteronuclear NMR spectroscopy, we have characterized several denatured states of a monomeric variant of HIV‐1 protease, which is natively structured in water, induced by different concentrations of urea, guanidinium chloride, and acetic acid. We have extrapolated the chemical shifts and the relaxation parameters to the denaturant‐free denatured state at native conditions, showing that they converge to the same values. Subsequently, we characterized the conformational properties of this biologically relevant denatured state under native conditions by advanced molecular dynamics simulations and validated the results by comparison to experimental data. We show that the denatured state of HIV‐1 protease under native conditions displays rich patterns of transient native and non‐native structures, which could be of relevance to its guidance through a complex folding process.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

A Rényi quantum null energy condition: proof for free field theories

The Quantum Null Energy Condition (QNEC) is a lower bound on the stress-energy tensor in quantum field theory that has been proved quite generally. It can equivalently be phrased as a positivity condition on the second null shape derivative of the relative entropy S rel (ρ||σ) of an arbitrary state ρ with respect to the vacuum σ. The relative entropy has a natural one-parameter family generalization, the Sandwiched Rényi divergence S n (ρ||σ), which also measures the distinguishability of two states for arbitrary n &isin; [1/2, ∞). A Rényi QNEC, a positivity condition on the second null shape derivative of S n (ρ||σ), was conjectured in previous work. In this work, we study the Rényi QNEC for free and superrenormalizable field theories in spacetime dimension d > 2 using the technique of null quantization. In the above setting, we prove the Rényi QNEC in the case n > 1 for arbitrary states. We also provide counterexamples to the Rényi QNEC for n < 1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

On exact-WKB analysis, resurgent structure, and quantization conditions

There are two well-known approaches to studying nonperturbative aspects of quantum mechanical systems: saddle point analysis of the partition functions in Euclidean path integral formulation and the exact-WKB analysis based on the wave functions in the Schrödinger equation. In this work, based on the quantization conditions obtained from the exact-WKB method, we determine the relations between the two formalism and in particular show how the two Stokes phenomena are connected to each other: the Stokes phenomenon leading to the ambiguous contribution of different sectors of the path integral formulation corresponds to the change of the “topology” of the Stoke curves in the exact-WKB analysis. We also clarify the equivalence of different quantization conditions including Bohr-Sommerfeld, path integral and Gutzwiller’s ones. In particular, by reorganizing the exact quantization condition, we improve Gutzwiller’s analysis in a crucial way by bion contributions (incorporating complex periodic paths) and turn it into an exact result. Furthermore, we argue the novel meaning of quasi-moduli integral and provide a relation between the Maslov index and the intersection number of Lefschetz thimbles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Spatiotemporal distribution of chemical signatures exhibited by Myxococcus xanthus in response to metabolic conditions

Myxococcus xanthus is a common soil bacterium with a complex life cycle, which is known for production of secondary metabolites. However, little is known about the effects of nutrient availability on M. xanthus metabolite production. In this study, we utilize confocal Raman microscopy (CRM) to examine the spatiotemporal distribution of chemical signatures secreted by M. xanthus and their response to varied nutrient availability. Here, ten distinct spectral features are observed by CRM from M. xanthus grown on nutrient-rich medium. However, when M. xanthus is constrained to grow under nutrient-limited conditions, by starving it of casitone, it develops fruiting bodies, and the accompanying Raman microspectra are dramatically altered. The reduced metabolic state engendered by the absence of casitone in the medium is associated with reduced, or completely eliminated, features at 1140 cm –1 , 1560 cm –1 , and 1648 cm –1 . In their place, a feature at 1537 cm –1 is observed, this feature being tentatively assigned to a transitional phase important for cellular adaptation to varying environmental conditions. In addition, correlating principal component analysis heat maps with optical images illustrates how fruiting bodies in the center co-exist with motile cells at the colony edge. While the metabolites responsible for these Raman features are not completely identified, three M. xanthus peaks at 1004, 1151, and 1510 cm –1 are consistent with the production of lycopene. Thus, a combination of CRM imaging and PCA enables the spatial mapping of spectral signatures of secreted factors from M. xanthus and their correlation with metabolic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Improved subseasonal-to-seasonal precipitation prediction of climate models with nudging approach for better initialization of Tibetan Plateau-Rocky Mountain Circumglobal wave train and land surface conditions

Abstract Reliable subseasonal-to-seasonal (S2S) precipitation prediction is highly desired due to the great socioeconomical implications, yet it remains one of the most challenging topics in the weather/climate prediction research area. As part of the Impact of Initialized Land Temperature and Snowpack on Sub-seasonal to Seasonal Prediction (LS4P) project of the Global Energy and Water Exchanges (GEWEX) program, twenty-one climate models follow the LS4P protocol to quantify the impact of the Tibetan Plateau (TP) land surface temperature/subsurface temperature (LST/SUBT) springtime anomalies on the global summertime precipitation. We find that nudging towards reanalysis winds is crucial for climate models to generate atmosphere and land surface initial conditions close to observations, which is necessary for meaningful S2S applications. Simulations with nudged initial conditions can better capture the summer precipitation responses to the imposed TP LST/SUBT spring anomalies at hotspot regions all over the world. Further analyses show that the enhanced S2S prediction skill is largely attributable to the substantially improved initialization of the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train pattern in the atmosphere. This study highlights the important role that initial condition plays in the S2S prediction and suggests that data assimilation technique (e.g., nudging) should be adopted to initialize climate models to improve their S2S prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Main bearing response in a waked 15-MW floating wind turbine in below-rated conditions

Increased wind turbine size raises unknowns related to structural flexibility. Moreover, moving to deeper waters, component reliability becomes more critical. This work investigates main bearing response dependence on drivetrain flexibility and wake impingement in a two-turbine wind farm. A 15-MW floating direct-drive turbine is considered. Large eddy simulations (LES) are employed to model neutral, stable and unstable atmospheric conditions at below-rated mean wind speed, while the engineering codes OpenFAST and FAST.Farm simulate turbine and wake behavior. Results indicate significant sensitivities in fatigue estimates to lateral distance between the upstream and downstream turbine. The trends are most substantial in stable conditions, where the waked downwind main bearing sees twice the fatigue damage estimates of the upstream turbine for one position and 50% for another. Main bearing fatigue sensitivity to drivetrain flexibility is minor, while properly including generator rotor inertia loads is important for the axial forces of the locating (axially fixed) bearing, especially in stable conditions.

17 WIND ENERGY↗
DOE OSTI2021

Differential effects of redox conditions on the decomposition of litter and soil organic matter

Soil redox conditions exert substantial influence on biogeochemical processes in terrestrial ecosystems. Humid tropical forests are often characterized by fluctuating redox dynamics, yet how redox fluctuations affect patterns in soil versus litter decomposition and associated CO2 fluxes are not well understood in these ecosystems. We used a 13C-labeled litter addition to explicitly follow the decomposition of litter-derived vs. native soil-derived organic matter in response to four different soil redox regimes—static oxic or anoxic, and two oscillating treatments—in soil from the Luquillo Experimental Forest, Puerto Rico. We coupled this incubation experiment with high-resolution mass spectrometry analysis to characterize the preferential decomposition of specific classes of organic molecules. CO2 production from litter and soil organic matter (SOM) showed distinctly different responses to redox manipulation. The cumulative production of SOM-derived CO2 was positively correlated with the length of soil exposure to an oxic headspace (r = 0.89, n = 20), whereas cumulative 13C-litter-derived CO2 production was not linked to oxygen availability. The CO2 production rate from litter was highest under static anoxic conditions in the first half of the incubation period, and later dropped to the lowest among all redox treatments. In the consistently anoxic soils, we observed the depletion of more oxidized water-extractable organic matter (especially amino sugars, carbohydrates, and proteins) over time, suggesting that under anaerobic conditions, microbes preferentially used more oxidized litter-derived compounds during the early stages of decomposition. Results from kinetic modeling showed that more frequent anoxic exposure limited the decomposition of a slow-cycling C pool, but not a fast-cycling pool. Overall, our results demonstrate that substrate source—freshly added litter vs. native organic matter—plays an important role in the redox sensitivity of organic matter decomposition. In soil environments that regularly experience redox fluctuations, anaerobic heterotrophs can be surprisingly effective in degrading fresh plant litter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stability Analysis of Coupled Advection-Diffusion Models with Bulk Interface Condition

Numerical stability is of critical importance in general circulation models because it affects the design of algorithms, time to solution, and computational costs associated with the simulations, which are very expensive in practice. In this paper we extend the stability analysis for ocean-atmosphere coupling proposed in [Zhang et al., J. Sci. Comput. 84, 44(2020)] to a more realistic model that includes horizontal advection. We analyze various time-stepping strategies. We find that advection has a stabilizing effect in scenarios common to climate models when bulk interface condition and explicit flux coupling are used. We also show that our method can be used to study the stability impact of advection for other interface conditions such as Dirichlet-Neumann conditions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Evaluation of near-ambient algal biomass fractionation conditions for bioproduct development

This contribution describes an algal fractionation scheme based on cell lysing and carbohydrate hydrolysis under acidic conditions, coupled with solvent extraction, that produces algal lipids, carbohydrates, and proteinaceous solid from partially dewatered algal biomass. Here, a design of experiments analysis was employed to identify the effect of fractionation conditions on the yields of the three product streams. By selection of appropriate conditions, the process can be steered from simple lipid extraction to near complete fractionation of the biomass. Lipid purification and upgrading were respectively achieved with a low-cost adsorbent and an inexpensive Ni-based catalyst that deoxygenated the lipids via decarboxylation/decarbonylation, an approach offering several advantages over the hydrodeoxygenation-based processes typically employed to convert lipids to hydrocarbons. The proteinaceous solids obtained were found to have much lower ash content as well as higher protein content relative to the untreated algae, enhancing the suitability of this material as a feedstock for the production of bioplastics.

09 BIOMASS FUELS↗
DOE OSTI2022

Schmid factor crack propagation and tracking crystallographic texture markers of microstructural condition in direct energy deposition additive manufacturing of Ti-6Al-4V

Metallic additive manufacturing (AM) provides a customizable and tailorable manufacturing process for new engineering designs and technologies. The greatest challenge currently facing metallic AM is maintaining control of microstructural evolution during solidification and any solid state phase transformations during the build process. Ti-6Al-4V has been extensively surveyed in this regard, with the potential solid state and solidification microstructures explored at length. In this study, we evaluate the applicability of previously determined crystallo- graphic markers of microstructural condition observed in electron beam melting powder bed fusion (PBF-EB) builds of Ti-6Al-4V in a directed energy deposition (DED) build process. The aim of this effort is to elucidate whether or not these specific crystallographic textures are useful tools for indicating microstructural conditions in AM variants beyond PBF-EB. Parent β-Ti grain size was determined to be directly related to α-Ti textures in the DED build process, and the solid state microstructural condition could be inferred from the intensity of specific α-Ti orientations. Qualitative trends on the as-solidified β-Ti grain size were also determined to be related to the presence of a fiber texture, and proposed as a marker for as-solidified grain size in any cubic metal melted by AM. Analysis of the DED Ti-6Al-4V build also demonstrated a near complete fracture of the build volume, suspected to originate from accumulated thermal stresses in the solid state. Crack propagation was found to only appreciably occur in regions of slow cooling with large α +β colonies. Schmid factors for the basal and prismatic α-Ti systems explained the observed crack pathway, including slower bifurcation in colonies with lower Schmid factors of both slip systems. Colony morphologies and localized equiaxed β-Ti solidification were also found to originate from build pauses during production and uneven heating of the build edges during deposition. Tailoring of DED Ti-6Al-4V microstructures with the insight gained here is proposed, along with cautionary insight on preventing unplanned build pauses to maintain an informed and controlled thermal environment for microstructural control.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Gravastars in (3+1) dimensions admitting Karmarkar condition

Highlights: • Model of Gravastar in (3+1) dimensions is studied under GR. • Karmarkar condition of Embedding class 1 has been incorporated. • The class 1 condition provides an exact solution of three regions of gravastar. • Surface redshift confirms the stability of the model which is non-singular. - Abstract: The development of gravastar model by Mazur and Mottola (2004) is one of the most acceptable alternatives of conventional classical black hole. They have studied phase transition of the collapsing stellar objects at low temperature near event horizon which leads to the condensate phase, i.e. Bose–Einstein condensation. In the present study we have obtained a unique solution of this gravastar model under Einstein’s GR in (3+1) dimensions by incorporating the Karmarkar condition for embedding class 1. The most important motive of this work is to find an exact solution of the shell without taking the thin shell approximation. We have obtained singularity free finite solutions for the interior of the gravastar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Embedding condition describing shearing, dissipative collapse

Highlights: • Perturbative approach to the time-dependent Karmarkar condition in shearing collapse. • Analysis of the (in)stability of the collapsing fluid using the TOV equation. • Study of the temperature profiles using a causal heat transport equation. In this work we employ the time-dependent Karmarkar condition to model dissipative gravitational collapse in the presence of shear which leads to a final static configuration. We believe that this is a first attempt at using the time-dependent Karmarkar condition describing a radiating star with shear in which the collapsing core dissipates energy in the form of a radial heat flux. The final static configuration which is described by an embedding class I spacetime was obtained by Hansraj and Moodly who showed that this solution satisfies all the physical requirements for a static compact object. As the collapse proceeds and the heat flux tends to zero the dynamical core evolves into a static compact core with the exterior spacetime being described by the vacuum Schwarzschild solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Dual function materials (Ru+Na 2 O/Al 2 O 3 ) for direct air capture of CO 2 and in situ catalytic methanation: The impact of realistic ambient conditions

Here a dual function material (DFM) comprised of 1% Ru, 10% Na 2 O/γ–Al 2 O 3 was studied for combined direct air capture (DAC) of CO 2 and catalytic methanation in a temperature swing operation. In the newly proposed operation, the DFM captures CO 2 (400 ppm) from air at ambient conditions. The material is then heated in H 2 to a temperature sufficient for catalytic conversion of the captured CO 2 to renewable natural gas. In this study, we demonstrate high CO 2 adsorption capacity and rates at ambient conditions (25 °C); the adsorbed CO 2 is then successfully catalytically methanated upon heating in H 2 . Adsorption was also carried out in humid conditions, more closely simulating ambient air. Adsorption and methane production were greatly improved with stable initial performance. The rate of adsorption is shown to be flowrate-dependent, which is critical for future reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Wettability and CHF limits of Accident-Tolerant nuclear fuel cladding materials in light water reactor conditions

Here, we present the results of experimental investigations aimed at evaluating the thermal–hydraulic performance of chromium-coated zircaloy, i.e., one of the most promising accident tolerant fuel (ATF) cladding material for light water nuclear reactors. Precisely, we investigate the wettability and critical heat flux (CHF) limits of chromium-coated and conventional zircaloy surfaces in prototypical reactor conditions. For both surface types, we measure the contact angle in a vapor-saturated atmosphere from ambient pressure to the operating pressure of pressurized water reactors (PWRs), i.e., ~15 MPa. We measure the ambient-pressure steady-state flow boiling CHF with a spatially uniform heat flux. We measure the high-pressure steady-state flow boiling CHF with a cosine shape heat flux (up to 20 MPa) and with a uniform heat flux (up to 15 MPa), also exploring the effect of CRUD deposits on the chromium-coated surface. Our results reveal that the chromium surface and the bare zircaloy surface have similar wettability and both become super-hydrophilic in PWR conditions, and that there is practically no difference in the steady-state CHF limits, both at low-pressure and high-pressure conditions, also when the chromium-coated surface is covered by a CRUD deposit. However, while the chromium-coating does not improve the CHF compared to the bare zircaloy surface, it improves the post-CHF behavior. The chromium coating prevents the reaction between zircaloy and steam, which results in the formation of a brittle zirconium oxide through the surface of the cladding. We also measure the transient CHF under exponentially escalating heat flux inputs of a nano-smooth and a rough surface mimicking a chromium-coated zircaloy cladding. Interestingly, the results of the transient heat flux tests suggest that the CHF limit for very short periods (i.e., fast transients) is independent of the surface finish, being the same for a rough chromium surface or a nano-smooth surface.

36 MATERIALS SCIENCE↗