Search NASA⌕ Search

SEARCH · Search NASA

Results for “conductive polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

3ω techniques for measurement of volumetric heat capacity and anisotropic thermal conductivity of a solution processable, hybrid organic/inorganic film, Te-PEDOT:PSS

We report that measuring the thermal properties of anisotropic films of hybrid materials poses a challenge to existing metrology techniques. We have developed a new approach for measuring the volumetric heat capacity and anisotropic thermal conductivity of these systems using the 3ω method. While there exist many avenues for measuring the thermal properties of thin films, most carry with them difficult requirements such as smooth surfaces or advanced lithography. Here, we present measurements of a film's in-plane and cross-plane conductance and its volumetric heat capacity using relatively simple sample configurations, each requiring a single heater. For the measurement of volumetric heat capacity, we present a new model fitting method, relying on a standard film-on-substrate configuration. For the measurement of in-plane thermal conductance by 3ω, we have developed the use of an embedded micro-wire heater in suspended drop cast films, allowing for a 12 μm wide heater without the need for advanced lithography. We also expose the surprisingly significant effect of thermal radiation in the suspended film measurement and its associated error. Our measurements reveal a large anisotropy in the thermal conductivity of our test material, Te-PEDOT:PSS, of k in-plane / k cross-plane = 19, consistent with the nanoscale morphology of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spatially resolved performance and degradation in a perfluorinated anion exchange membrane fuel cell

Anion exchange membrane fuel cells may enable future operation with non-precious metal-based catalysts. These systems have a delicate sensitivity to operating conditions such as humidification levels and the presence of CO2 in the air oxidant stream. We present spatially resolved in-situ performance results that shed light on phenomena that are unique to anion exchange membrane fuel cells. For cell construction, a highly conductive perfluorinated anion exchange polymer was used as the membrane and the material in powder form as the ionomer. Experiments were conducted to investigate the effects of humidification, fuel/oxidant concentration, and carbonation effects on the performance and its distribution in the cell. The results indicated that (i) dry conditions at the cathode have a stronger effect than at the anode on overall cell performance, (ii) performance significantly suffered when humidification was below 90%, (iii) fuel and oxidant dilution effects lead mass-transport losses and were stronger than flow rate effects, (iv) CO2 in the cathode feed stream creates an equilibration disparity between the inlet and outlet sections and CO2 purging is affected by flooding conditions, and (v) after >500 h of operation, performance deteriorates predominantly at the inlet.

2+1D fuel cell model↗
DOE OSTI2024

Revealing Mesoscale Ionomer Membrane Structure by Tender Resonant X-ray Scattering

Nafion, a perfluorosulfonic acid ionomer, has been well-studied for decades due to its key role as an ion-conductive membrane in electrochemical energy conversion and storage applications. When hydrated, this membrane phase separates into a complex hierarchical nanostructure with hydrophilic domains that facilitate ion transport. Hard X-ray scattering has been a powerful technique in understanding Nafion due to its capabilities in capturing the ionomer’s nanophase separated structure, which gives rise to contrast between polymer and water domains. More recently, resonant X-ray scattering, which tunes to elemental absorption edges to provide specificity on constituent elements, has been explored to highlight key interactions related to the sulfonic acid groups within its structure. Here, in this work, we study the Nafion nanostructure by combining hard X-ray scattering and tender resonant X-ray scattering (TReXS) at the sulfur K-edge to reveal a mesoscopic feature corresponding to a correlation length of approximately 40 nm that has been challenging to resolve with hard X-ray studies. Additionally, we study the effect of the dispersion solvent composition that plays a key role in the formation of this mesoscale feature. Notably, TReXS can attain high contrast to decipher this mesoscale morphology even for dry polymer membranes under a vacuum, which typically have reduced contrast for hard X-rays. We find that the correlation length of this mesoscale feature decreases with increasing water fraction in the dispersion, which is the opposite trend exhibited by the smaller intercrystalline feature in the same membranes. This study showcases the utility of TReXS to uncover multiscale morphological details in functional polymers that are not always revealed by other methods like hard X-ray scattering. We illustrate this with Nafion, which is a relevant ion-conducting polymer for electrochemical technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The organic redox transistor for neuromorphic computing

Inspired by the in-memory computing architectures of biological systems, neuromorphic computing using crossbar arrays of artificial synapses based on non-volatile memory (NVM) devices with variable conductances has emerged as a new paradigm to enable massively parallel and ultra-low power computing hardware for data centric applications. Although inference has been demonstrated successfully using crossbars based on a variety of NMV technologies, efficient learning and scaling to large arrays (>10 6 elements) remains a challenge due to the synaptic elements' non-ideal electrical characteristics which degrades ANN accuracy. A further challenge is that in the conductive state memristors draw large currents >μA resulting in significant voltage drops in the interconnect wires and increased probability of failure in scaled arrays. We suggest the organic polymer redox transistor (RT) is an alternate approach that could solve many of these challenges, enabling both inference and parallel outer product updates, as recently demonstrated by Fuller et al. An RT consists of redox-active channel and gate electrodes in contact with a liquid or solid electrolyte. lon insertion through the electrolyte controls the channel electronic conductivity, while electron transfer through an external circuit maintains overall charge neutrality. Unlike a rechargeable battery, in the RT the voltage built-up across the electrolyte is kept to a minimum (typically <100 mV) by using the same material for the gate and channel. Elimination of the voltage offset simplifies integration of the RT into programmable arrays by enabling the use of various selectors. RTs based on inorganic and organic materials have been recently demonstrated with conductance tuning occurring at potentials of just a few mV and hundreds to thousands of linearly and symmetrically programmable conductance states, enabling near ideal accuracy in neural network simulations. Introduced in the 1980's, redox transistors with metallic gate electrodes and organic channel materials, also known as organic electrochemical transistors (OECTs), have been explored for a variety of applications such as chem- and bio-sensing, neural interfaces, and low cost printed circuits. A typical channel material for OECTs is the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS). PEDOT is a p-type semiconducting polymer with mobile positively charged polarons that hop chain-to-chain.

Talin, Albert Alec↗
DOE OSTI2021

Nanostructured Block Polymer Electrolytes: Tailoring Self-Assembly to Unlock the Potential in Lithium-Ion Batteries

Ion-containing solid block polymer (BP) electrolytes can self-assemble into microphase-separated domains to facilitate the independent optimization of ion conduction and mechanical stability; this assembly behavior has the potential to improve the functionality and safety of lithium-ion batteries over liquid electrolytes to meet future demands (e.g., large capacities and long lifetimes) in various applications. However, significant enhancements in the ionic conductivity and processability of BPs must be realized for BP-based electrolytes to become robust alternatives in commercial devices. Toward this end, the controlled modification of BP electrolytes’ intra-domain (nanometer-scale) and multi-grain (micrometer-scale) structure is one viable approach; intra-domain ion transport and segmental compatibility (related to the effective Flory–Huggins parameter, χ eff ) can be increased by tuning the ion and monomer-segment distributions, and the morphology can be selected such that the multi-grain transport is less sensitive to grain size and orientation.

25 ENERGY STORAGE↗
DOE OSTI2020

Impact of Ionic Liquid on Lithium Ion Battery with a Solid Poly(Ionic Liquid) Pentablock Terpolymer as Electrolyte and Separator

In this work, a ternary blend solid polymer electrolyte (SPE) consisting of a poly(ionic liquid) (PIL) multiblock polymer, lithium salt, and ionic liquid (IL) was investigated with the goal of understanding the influence of IL concentration on ion transport mechanisms and electrochemical stability. The physical, transport, mechanical, morphological, and electrochemical properties of the ternary blend SPE were systematically investigated as a function of IL concentration (r = [IL]/[PIL] mole ratio between 0.1 and 0.7). The results indicate that with increasing IL concentration, the continuous conductive domain increases along with the polymer chain segmental mobility, as well as facilitate ionic conductivity, while the mechanical modulus exhibits a percolation threshold (from 52.17 MPa to 0.55 MPa at r = 0.2 to 0.3). Surprisingly, at higher IL concentrations, there is a reduction in the lithium cation mobility (i.e., 9.3 × 10-12 m2 s-1 versus 3.8 × 10-12 m2 s-1 for r = 0.2 versus r = 0.5, respectively) as evidenced by pulsed-field gradient nuclear magnetic resonance (PFG-NMR), which coincides with an increased overpotential (i.e., 50 mV versus 150 mV for r = 0.2 versus r = 0.5, respectively) evidenced by lithium metal stripping and plating. This work provides valuable insights into the impact of IL on lithium ion conducting PIL block polymers, which may enable the design of new SPEs with both high ionic conductivity and improved stability for the future lithium ion batteries.

Chen, Tzu-Ling↗
DOE OSTI2025

Synthesis of highly sulfonated 2,6-diphenyl-p-Phenylene oxide: A highly conductive membrane

Highly sulfonated aromatic polymers are desired for the possible highest performance of polymer electrolytes in fuel cells and electrolyzer applications. Here, we reported the method to prepare highly sulfonated 2,6-diphenyl-p-phenylene oxide (SP3O), a commercially available aromatic polymer, with the highest IEC of 4.42 meq/g. Three sulfonation reagents including chlorosulfonic acid (HSO3Cl), concentrated sulfuric acid (conc. H2SO4), and trimethylsilyl chlorosulfonate (TMSCS) were investigated for single and two-step sulfonation reactions. In addition, DMSO-assisted thermal crosslinking method was applied to prepare crosslinked SP3O membranes to improve their mechanical strength and film-forming ability. Proton exchange membrane from crosslinked SP3O displayed a proton conductivity as high as 250 mS/cm at 95 % RH and 60 °C.

Khomein, Piyachai↗
DOE OSTI2022

Relaxation Dynamics and Ion Conduction of Poly(Ethylene Carbonate/Ethylene Oxide) Copolymer-Based Electrolytes

Poly(ethylene carbonate/ethylene oxide) P(EC/EO) copolymer was synthesized from EC monomer as a new matrix component of solid polymer electrolytes (SPEs), and the correlation between polymer dynamics and ionic conductivity in the P(EC/EO)-based SPEs at various lithium salt weight fractions (w Li ) was investigated by dielectric spectroscopy, rheology, and molecular dynamics (MD) simulations. With the addition of lithium salt, the molecular motions at various scales (i.e., from local to segmental and global motion scales) were found to change as follows: (i) the local motion of P(EC/EO) was slightly accelerated, and at w Li ≥ 0.22, it was separated into two relaxation modes, one faster and the other slower than that of P(EC/EO), (ii) the segmental motion of P(EC/EO) became significantly slower with the addition of lithium salt, and (iii) the global terminal relaxation became slightly slower with the increase of w Li . Thus, the motion of P(EC/EO) at various scales in SPEs changed with different trends with increasing lithium salt. It was also found that the temperature dependence of the ionic conductivity was described by a Vogel–Fulcher–Tammann-type function, which was correlated with the segmental motion, as is known in other SPE systems. Furthermore, from MD simulations, lithium ions are coordinated with the EC units more likely and with a closer distance than EO units in P(EC/EO), and the coordination number of oxygens around one lithium ion was estimated as 6–7 at the distance of 0.30 nm. Here, these results suggest that the coordination structure of the oxygens around the lithium ion is slightly disrupted due to the presence of EC units compared to the chelating structure of pure PEO electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Boundary layer description of directional polymer crystallisation

Nearly fifty years ago Lovinger and Gryte suggested that the directional crystallization of a polymer was analogous to the quiescent isothermal crystallization experiment but at a supercooling where the crystal growth velocity was equal to the velocity of the moving front. Our experiments showed that this equivalence holds in a detailed manner at low directional velocities. To understand the underlying physics of these situations, we modeled the motion of a crystallization front in a liquid where the left side boundary is suddenly lowered below the melting point (Stefan's problem) but with the modification that the crystallization kinetics follow a version of the Avrami model. Our numerical results surprisingly showed that the results of the polymer analog track with the Stefan results which were derived for a simple liquid that crystallizes completely at its melting point; in particular, the position of the crystal growth-front evolved with time exactly as in the Stefan problem. The numerical solution also showed that the temperature in the immediate vicinity of the growth-front decreased with increasing front velocity, which is in line with Lovinger and Gryte's ansatz. To provide a clear theoretical understanding of these numerical results we derive a boundary layer solution to the governing coupled differential equations of the polymer problem. The analytical results are in agreement with our observations from experiments and numerical computations but show that this equivalence between the small molecule and polymer analog only holds in the limit where the crystallization enthalpy is much larger than the rate at which heat is conducted away in the polymer. In particular, in the context of the temperature profile, the enthalpy generated by the crystallisation process which is spread out over a narrow spatial region can be approximated as a point source whose location and temperature correspond to the Lovinger–Gryte ansatz.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Through‐Plane Conductive Hydrophobic Electrodes for CO 2 Electrolysis to Ethylene

Copper catalyst gas diffusion electrodes (GDEs) have demonstrated unique electrochemical selectivity converting CO 2 to C 2 -hydrocarbons such as ethylene and ethanol but have been challenged by their hydrophobic chemical stability and internal electrical resistance leading to low energy efficiency. Carbon-supported GDEs have low electrical resistance but lack sufficient stability at industrially relevant current densities. While polymer-supported GDEs have improved hydrophobicity, they also display high in-plane electrical resistance, particularly at industrial scales. Here, in this work, we demonstrate a composite gas diffusion layer that combines hydrophobic porous polymers with an electrically conductive backbone addressing these core gas diffusion electrode (GDE) scaling challenges. We investigate the material properties of standalone porous perfluoropolyether (PFPE) polymers, including porosity and surface morphology, under varying processing conditions and then incorporate these polymers into a porous copper foam. This composite enhances the mechanical rigidity necessary for cell assembly and provides a through-plane electrical conduction path to reduce electrical resistive losses. This enhanced PFPE composite GDE displays efficient CO 2 reduction, achieving 15% ethylene energy efficiency at 100 cm 2 . These findings contribute to the development of advanced catalyst materials and electrode architectures and promote scalable strategies for electrochemical conversion of CO 2 into high-value carbon products.

Chemistry↗
DOE OSTI2022

Metal-like Charge Transport in PEDOT(OH) Films by Post-processing Side Chain Removal from a Soluble Precursor Polymer

Herein, a route to produce highly electrically conductive doped hydroxymethyl functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films, termed PEDOT(OH) with metal-like charge transport properties using a fully solution processable precursor polymer is reported. Further, this is achieved via an ester-functionalized PEDOT derivative [PEDOT(EHE)] that is soluble in a range of solvents with excellent film-forming ability. PEDOT(EHE) demonstrates moderate electrical conductivities of 20–60 S cm -1 and hopping-like (i.e., thermally activated) transport when doped with ferric tosylate (FeTos 3 ). Upon basic hydrolysis of PEDOT(EHE) films, the electrically insulative side chains are cleaved and washed from the polymer film, leaving a densified film of PEDOT(OH). These films, when optimally doped, reach electrical conductivities of ≈1200 S cm -1 and demonstrate metal-like (i.e., thermally deactivated and band-like) transport properties and high stability at comparable doping levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioderived Radical Polymers for Sustainable Energy Storage Materials

Organic mixed ionic and electronic conductors have emerged as promising materials for next-generation energy applications, and a variety of molecular designs have been implemented to push performance to higher levels. Importantly, nonconjugated redox-active radical polymers capable of charge transport offer benefits such as ready synthesis in large quantities and the capability to separate thermomechanical and electrochemical behaviors. This affords more freedom with respect to macromolecular backbone design; thus, the resultant materials properties make this class of polymers appealing alternatives for energy storage. However, these radical polymers often still rely on petrochemically derived polymer backbones. Here, we demonstrate the polymerization of the bioderived terpene β-myrcene and its functionalization by attaching stable radical pendant groups capable of mixed electronic and ionic conduction. The electrochemical enhancement of these materials was substantial as the addition of carbon black and doping of lithium salts electronic conductivities of ~60 S cm -1 were achieved for the composite systems. The addition of the lithium salts proved fruitful as the electric and ionic conductivities of the radical polymers surpassed 10 -4 S cm -1 at elevated temperatures when both lithium hexafluorophosphate and lithium chloride, a more bio and environmentally friendly material, where introduced to the system. Finally, these findings demonstrate a bioderived alternative for an organic mixed conductor serving as both potential cathode and polymer electrolyte for a more sustainable alternative for energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Organic Electrochemical Transistor Channel Materials: Copolymerization Versus Physical Mixing of Glycolated and Alkoxylated Polymers

Organic electrochemical transistors (OECTs) feature a polymer channel capable of conducting both ions and electronic charges. The choice of the channel material is critical for OECT performance. Many efforts have focused on improving performance via the chemical tunability of conjugated polymers – through backbone, side chain, and molar mass engineering – leading to useful design principles for accumulation-mode OECT materials. However, tuning the chemical structure of conjugated polymers often requires time-consuming optimization of the synthesis route. Meanwhile, variations in molar mass, dispersity, structural defects, and metal content present challenges when attempting to analyze the detailed effects of structural modifications, as multiple performance-determining factors are often (unintentionally) changed at the same time. Therefore, this study explores blended channel materials obtained by physically mixing glycolated and alkoxylated polymers in different ratios, and compares their OECT performance with the corresponding statistical copolymers. It is shown that mixing two well-performing materials creates blends that enable rational tuning of the transistor properties without compromising on performance. Thus, channels based on blends of alkoxylated and glycolated polymers hold promise for OECT technology with tailored response, as only two materials are needed to achieve any desired side chain ratio, simplifying the optimization of OECT characteristics.

copolymerization↗
DOE OSTI2021

Effects of Plasticizer Content and Ceramic Addition on Electrochemical Properties of Cross-Linked Polymer Electrolyte

The development of a safe electrolyte is the key to improving energy density for next generation lithium batteries. In this work, UV-crosslinked poly(ethylene oxide) (PEO) -based polymer and composite electrolytes are systematically investigated on their ionic conductivity, mechanical and electrochemical properties. The polymer electrolytes are plasticized with non-flammable linear short-chain PEO. In the composite electrolytes, a doped lithium aluminum titanium phosphate (LATP) ceramic, LICGC™, is used as the ceramic filler. It is found that the addition of the plasticizer leads to a tradeoff between ion transport and mechanical properties. In contrast, the addition of ceramic fillers improves both the ionic conductivity and mechanical properties. The sample with 20 wt% of LICGC™ shows a conductivity of ~0.6 mS cm –1 at 50 °C. This sample also demonstrates much longer cycle life than the neat polymer electrolyte in Li platting/stripping test with a capacity of 1 mAh cm –2 . Further, a full cell made with this composite electrolyte against Li metal anode and high voltage LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode shows 94% capacity retention after 30 cycles, compared to 58% capacity retention with the neat polymer electrolyte. These results demonstrate that a hybrid of polymer/ceramic/non-flammable plasticizer is a promising path to high energy density, high voltage lithium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Analysis of Experimental Shock Propagation through a Diverse Set of Geometric Cavities Embedded in Lab-Scale Polymer Cubes

Experiments were designed and conducted to investigate the impact that geometric cavities have on the transfer of energy from an embedded explosion to the surface of the physical domain. The experimental domains were fabricated as 3-inch polymer cubes, with varying cavity geometries centered in the cubes. The energy transfer, represented as a shock wave, was generated by the detonation of an exploding bridgewire at the center of the cavity. The shock propagation was tracked by schlieren imaging through the optically accessible polymer. The magnitude of energy transferred to the surface was recorded by an array of pressure sensors. A minimum of five experimental runs were conducted for each cavity geometry and statistical results were developed and compared. Results demonstrated the decoupling effect that geometric cavities produce on the energy field at the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Giant Transport Anisotropy in ReS 2 Revealed via Nanoscale Conducting-Path Control

The low in-plane symmetry in layered 1T'-ReS 2 results in strong band anisotropy, while its manifestation in the electronic properties is challenging to resolve due to the lack of effective approaches for controlling the local current path. In this work, we reveal the giant transport anisotropy in monolayer to four-layer ReS 2 by creating directional conducting paths via nanoscale ferroelectric control. By reversing the polarization of a ferroelectric polymer top layer, we induce conductivity switching ratio of >1.5×10 8 in the ReS 2 channel at 300 K. Characterizing the domain-defined conducting nanowires in an insulating background shows that the conductivity ratio between the directions along and perpendicular to the Re-chain can exceed 5.5×10 4 in monolayer ReS 2 . Theoretical modeling points to the band origin of the transport anomaly, and further reveals the emergence of a flat band in few-layer ReS 2 . Our work paves the path for implementing the highly anisotropic 2D materials for designing novel collective phenomena and electron lensing applications.

2D van der Waals materials↗
DOE OSTI2020

Combining Chemistry, Material Science, Inspiration from nature, and Serendipity to Develop Stimuli-responsive Polymeric Materials

Neither of us can remember people talking about stimuli-responsive polymers when we were students. Even though this was still in the last century, it was almost 70 years after Staudinger's seminal paper "uber Polymerisation"![1] By the time we entered graduate school in the early 1990 s, the first papers on polymer light emitting diodes appeared, while research on electrically conducting, nonlinear optical, and other "functional" polymers was already in full swing. Looking back, there were some stimuli-responsive materials that were around at the time, but it took the better part of the last 30 years until the field had developed into what we think is one of the most vibrant areas of polymer science. Before the potential usefulness of this class of materials was recognized, researchers were focused on developing polymeric materials that would not respond to external influences, and in fact maintain (in particular) their mechanical properties in a wide range of environments. This has led to the development of many environmentally robust polymers, which have come to impact basically every aspect of our daily life. Ironically, this long-sought stability now comes back to haunt us in the form of plastic pollution, but this is another story. The concept of materials that adapt their properties in response to changing environmental conditions might appear like a complete reversal with respect to the original goals of creating stable materials. However, eventually a) it was recognized that materials that respond to a specific stimulus in a predictable and useful manner would significantly broaden the potential usefulness of polymers, and b) the field of polymer science had developed to the point where the rational design, preparation, and characterization of such materials became possible. The expression 'stimuli-responsive polymer' had been first used in the 1980's, however its use really only gained popularity a few decades later. In the early days, terms such as environmentally-sensitive or environmentally-responsive polymers, stimuli-reversible or stimuli-sensitive polymers, or polymers with phase transitions have also been used.

Rowan, Stuart J.↗