Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Thermally Induced 2D Alloy-Heterostructure Transformation in Quaternary Alloys

Composition and phase specific 2D transition metal dichalogenides (2D TMDs) with a controlled electronic and chemical structure are essential for future electronics. While alloying allows bandgap tunability, heterostructure formation creates atomically sharp electronic junctions. Herein, the formation of lateral heterostructures from quaternary 2D TMD alloys, by thermal annealing, is demonstrated. Phase separation is observed through photoluminescence and Raman spectroscopy, and the sharp interface of the lateral heterostructure is examined via scanning transmission electron microscopy. The composition–dependent transformation is caused by existence of miscibility gap in the quaternary alloys. The phase diagram displaying the miscibility gap is obtained from the reciprocal solution model based on density functional theory and verified experimentally. In conclusion, the experiments show direct evidence of composition–driven heterostructure formation in 2D atomic layer systems.

36 MATERIALS SCIENCE↗

Broadband THz Modulation via Solid–State Organic Electrochemical Devices

The sub-Terahertz and Terahertz bands play a critical role in next-generation wireless communication and sensing technologies, thanks to the large amount of available bandwidth in this spectral regime. While long-wavelength (microwave to mm-Wave) and short-wavelength (near-infrared to ultraviolet) devices are well-established and studied, the sub-THz to THz regime remains relatively underexplored and underutilized. Traditional approaches used in the aforementioned spectral regions are more difficult to replicate in the THz band, leading to the need for the development of novel devices and structures that can manipulate THz radiation effectively. Herein a novel organic, solid-state electrochemical device is presented, capable of achieving modulation depths of over 90% from ≈500 nm of a conducting polymer that switches conductivity over a large dynamic range upon application of an electronically controllable external bias. The stability of such devices under long-term, repeated voltage switching, as well as continuous biasing at a single voltage, is also explored. Switching stabilities and long-term bias stabilities are achieved over two days for both use cases. Additionally, both depletion mode (always “ON”) and accumulation mode (always “OFF”) operation are demonstrated. These results suggest applications of organic electrochemical THz modulators in large area and flexible implementations.

36 MATERIALS SCIENCE↗

Improvement of butanol production in Clostridium acetobutylicum through enhancement of NAD(P)H availability

Clostridium acetobutylicum is a natural producer of butanol, butyrate, acetone and ethanol. Furthermore, the pattern of metabolites reflects the partitioning of redox equivalents between hydrogen and carbon metabolites. Here the exogenous genes of ferredoxin-NAD(P) + oxidoreductase (FdNR) and trans -enoyl-coenzyme reductase (TER) are introduced to three different Clostridium acetobutylicum strains to investigate the distribution of redox equivalents and butanol productivity. The FdNR improves NAD(P)H availability by capturing reducing power from ferredoxin. A butanol production of 9.01 g/L (36.9% higher than the control), and the highest ratios of butanol/acetate (7.02) and C 4 /C 2 (3.17) derived metabolites were obtained in the C acetobutylicum buk - strain expressing FdNR. While the TER functions as an NAD(P)H oxidase, butanol production was decreased in the C. acetobutylicum strains containing TER. The findings highlight that metabolic flux can be significantly changed and directed into butanol or butyrate due to enhancement of NAD(P)H availability by controlling electron flow through the ferredoxin node.

59 BASIC BIOLOGICAL SCIENCES↗

Imaging Fluorescence-Correlation Spectroscopy for Measuring Fast Surface Diffusion at Liquid/Solid Interfaces

The development of techniques to probe interfacial molecular transport is important for understanding and optimizing surface-based analytical methods including surface-enhanced spectroscopies, biological assays, and chemical separations. Single-molecule-fluorescence imaging and tracking has been used to measure lateral diffusion rates of fluorescent molecules at surfaces, but the technique is limited to the study of slower diffusion, where molecules must remain relatively stationary during acquisition of an image in order to build up sufficient intensity in a spot to detect and localize the molecule. Although faster time resolution can be achieved by fluorescence-correlation spectroscopy (FCS), where intensity fluctuations in a small spot are related to the motions of molecules on the surface, long-lived adsorption events arising from surface inhomogeneity can overwhelm the correlation measurement and mask the surface diffusion of the moving population. Here, we exploit a combination of these two techniques, imaging-FCS, for measurement of fast interfacial transport at a model chromatographic surface. This is accomplished by rapid imaging of the surface using an electron-multiplied-charged-coupled-device (CCD) camera, while limiting the acquisition to a small area on the camera to allow fast framing rates. The total intensity from the sampled region is autocorrelated to determine surface diffusion rates of molecules with millisecond time resolution. Here, the technique allows electronic control over the acquisition region, which can be used to avoid strong adsorption sites and thus minimize their contribution to the measured autocorrelation decay and to vary the acquisition area to resolve surface diffusion from adsorption and desorption kinetics. As proof of concept, imaging-FCS was used to measure surface diffusion rates, interfacial populations, and adsorption–desorption rates of 1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine (DiI) on planar C18- and C1-modified surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photophysics of J-Aggregate-Mediated Energy Transfer on DNA

Achieving nanoscale spatial and electronic control over the formation of dye aggregates is a major synthetic challenge due to their typically inhomogeneous self-assembly, which limits control over their higher-order organization. To address these challenges, synthetic DNA-templated pseudoisocyanine (PIC) J-aggregates were recently introduced. However, the dependence of the photophysics of the superradiant exciton on the underlying DNA template length and the impact of static disorder on energy transfer through these PIC J-aggregates remain unknown. We examine the delocalization length progression of superradiant PIC excitons by varying the length of poly-A DNA tracts that template PIC J-aggregates. We then investigate the energy-transfer efficiency from PIC J-aggregates with DNA duplex template length, which we found to be limited by static disorder. Furthermore, utilizing the self-assembled and selective formation of superradiant excitons on DNA provides a platform to determine the function of delocalized excitons in the context of nanoscale energy transport.

36 MATERIALS SCIENCE↗

Charge transfer in iridate-manganite superlattices

Charge transfer in superlattices consisting of SrIrO$_3$ and SrMnO$_3$ is investigated using density functional theory. Despite the nearly identical work function and non-polar interfaces between SrIrO$_3$ and SrMnO$_3$, rather large charge transfer was experimentally reported between them. Our results provide a qualitative understanding to such experimental reports. We further develop a microscopic model that captures the mechanism behind this phenomenon. This leads to unique strain dependence of such charge transfer in iridate-manganite superlattices. The predicted behavior is consistently verified by experiment. Lastly, our work thus demonstrates a new route to control electronic states in non-polar oxide heterostructures.

36 MATERIALS SCIENCE↗

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal–carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO 2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm 2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (−6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm 2 ) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm 2 area Pt/C/HfO 2 /Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal–carbon catalytic condensers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect Self-Elimination in Nanocube Superlattices Through the Interplay of Brownian, van der Waals, and Ligand-Based Forces and Torques

Understanding defect healing is necessary for realizing devices based on nanoparticle-superlattices with controlled electronic and optoelectronic performance. However, key questions remain regarding nanoparticle interactions and resulting assembly dynamics and defect self-elimination. In particular, for anisotropic particles, additional degrees of freedom beyond those of spherical particles, such as rotational dynamics and toques, significantly impact phenomena. Here, in this work, we investigate nanocube (NC) superlattices by employing liquid phase transmission electron microscopy, continuum theories and molecular dynamics simulations. Analyzing interparticle forces and torques due to van der Waals, Brownian, and ligand interactions, we find that the latter dominates and that the anisotropic NC morphology introduces significant torques. In imperfect regions, unbalanced forces and torques induce NC translations and rotations that are transmitted to neighboring NCs, prompting “chain interactions” in a 2D network, which lead to defect self-elimination. This fundamental understanding will further enable design and fabrication of defect-free superlattices, as well as those with tailored defects, via assembly of anisotropic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum-Confined Lifshitz Transition on Weyl Semimetal T d -MoTe 2

Adsorption of alkali atoms onto material surfaces is widely utilized for controlling electronic properties and is particularly effective for two-dimensional materials. While tuning the chemical potential and band gap and creating quantum-confined states are well established for alkali adsorption on semiconductors, the effects on semimetallic systems remain largely elusive. Here, utilizing angle-resolved photoemission spectroscopy measurements and density functional theory calculations, we disclose the creation of two-dimensional electron gas and the quantum-confined Lifshitz transition at the surface of a Weyl semimetal T d -MoTe 2 by potassium adsorption. Electrons from potassium adatoms are shown to be transferred mainly to the lowest unoccupied band within the gapped part of the Brillouin zone, which, in turn, induces strong surface band bending and quantum confinement in the topmost layer. The quantum-confined topmost layer evolves from a semimetal to a strong metal with a Lifshitz transition departing substantially from the bulk band. The present finding and its underlying mechanism can be exploited for the creation of electronic heterojunctions in van der Waals semimetals.

36 MATERIALS SCIENCE↗

Frustrated Rotations in Single-Molecule Junctions

We compare the conductance of 1,4-bis(methylthio)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b{prime}]dithiophene and the conductance of 1,4-bis(methylseleno)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b{prime}]diselenophene and show explicitly that the orientation of an Au-S or Au-Se bond relative to the aromatic {pi} system controls electron transport through conjugated molecules. Specifically, we have found that the conduction pathway connects the Au electrodes to the aromatic {pi}-system via the chalcogen p lone pairs, and greater overlaps among these components lead to higher conductivity through the molecular junction.

43 PARTICLE ACCELERATORS↗

Atomic Alignment in PbS Nanocrystal Superlattices with Compact Inorganic Ligands via Reversible Oriented Attachment of Nanocrystals

Nanocrystals (NCs) serve as versatile building blocks for the creation of functional materials with NC self-assembly offering opportunities to enable novel material properties. Here, in this work, we demonstrate that PbS NCs functionalized with strongly negatively charged metal chalcogenide complex (MCC) ligands, such as Sn 2 S 6 4– and AsS 4 3– , can self-assemble into all-inorganic superlattices with both long-range superlattice translational and atomic-lattice orientational order. Structural characterizations reveal that the NCs adopt an unexpected edge-to-edge alignment, and numerical simulation clarifies that orientational order is thermodynamically stabilized by many-body ion correlations originating from the dense electrolyte. Furthermore, we show that the superlattices of Sn 2 S 6 4– -functionalized PbS NCs can be fully disassembled back into the colloidal state, which is highly unusual for orientationally attached superlattices with atomic-lattice alignment. The reversible oriented attachment of NCs, enabling their dynamic assembly and disassembly into effectively single-crystalline superstructures, offers a pathway toward designing reconfigurable materials with adaptive and controllable electronic and optoelectronic properties.

Landau-Ginzburg theory↗

Cytochrome c lysine acetylation regulates cellular respiration and cell death in ischemic skeletal muscle

Skeletal muscle is more resilient to ischemia-reperfusion injury than other organs. Tissue specific post-translational modifications of cytochrome c (Cytc) are involved in ischemia-reperfusion injury by regulating mitochondrial respiration and apoptosis. Here, we describe an acetylation site of Cytc, lysine 39 (K39), which was mapped in ischemic porcine skeletal muscle and removed by sirtuin5 in vitro. Using purified protein and cellular double knockout models, we show that K39 acetylation and acetylmimetic K39Q replacement increases cytochrome c oxidase (COX) activity and ROS scavenging while inhibiting apoptosis via decreased binding to Apaf-1, caspase cleavage and activity, and cardiolipin peroxidase activity. These results are discussed with X-ray crystallography structures of K39 acetylated (1.50 Å) and acetylmimetic K39Q Cytc (1.36 Å) and NMR dynamics. We propose that K39 acetylation is an adaptive response that controls electron transport chain flux, allowing skeletal muscle to meet heightened energy demand while simultaneously providing the tissue with robust resilience to ischemia-reperfusion injury.

59 BASIC BIOLOGICAL SCIENCES↗

Hybrid dynamic windows using reversible metal electrodeposition and ion insertion

Dynamic windows with electronically controlled transmission reduce glare without obstructing views while increasing the energy efficiency of buildings and automobiles via lighting, heating and cooling savings. Electrochromic materials, which change colour with voltage, are widely explored for use in dynamic windows, but they have not been extensively commercialized due to problems associated with colour, cost, switching speed and durability. Here, we develop a class of dynamic windows that combines reversible metal electrodeposition with ion insertion chemistry. These devices function through the reversible electroplating of Bi and Cu at the working electrode and Li+ insertion in a nickel oxide counter electrode. In one minute, 100 cm 2 windows uniformly switch between a clear state with 75% transmission and a colour-neutral black state possessing 10% transmission, which represents a significant improvement over previous metal-based architectures. We demonstrate that these hybrid windows cycle at least 4,000 times without degradation and are compatible with flexible substrates. Finally, we discuss how this approach can be used to design practical large-scale windows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox active plant phenolic, acetosyringone, for electrogenetic signaling

Abstract Redox is a unique, programmable modality capable of bridging communication between biology and electronics. Previous studies have shown that the E. coli redox-responsive OxyRS regulon can be re-wired to accept electrochemically generated hydrogen peroxide (H 2 O 2 ) as an inducer of gene expression. Here we report that the redox-active phenolic plant signaling molecule acetosyringone (AS) can also induce gene expression from the OxyRS regulon. AS must be oxidized, however, as the reduced state present under normal conditions cannot induce gene expression. Thus, AS serves as a “pro-signaling molecule” that can be activated by its oxidation—in our case by application of oxidizing potential to an electrode. We show that the OxyRS regulon is not induced electrochemically if the imposed electrode potential is in the mid-physiological range. Electronically sliding the applied potential to either oxidative or reductive extremes induces this regulon but through different mechanisms: reduction of O 2 to form H 2 O 2 or oxidation of AS. Fundamentally, this work reinforces the emerging concept that redox signaling depends more on molecular activities than molecular structure. From an applications perspective, the creation of an electronically programmed “pro-signal” dramatically expands the toolbox for electronic control of biological responses in microbes, including in complex environments, cell-based materials, and biomanufacturing.

59 BASIC BIOLOGICAL SCIENCES↗

Deposition temperature-mediated growth of helically shaped polymers and chevron-type graphene nanoribbons from a fluorinated precursor

Graphene nanoribbons (GNRs) of precise size and shape, critical for controlling electronic properties and future device applications, can be realized via precision synthesis on surfaces using rationally designed molecular precursors. Fluorine-bearing precursors have the potential to form GNRs on nonmetallic substrates suitable for device fabrication. Here, we investigate the deposition temperature-mediated growth of a new fluorine-bearing precursor, 6,11-diiodo-1,4-bis(2-fluorophenyl)-2,3-diphenyltriphenylene (C 42 H 24 F 2 I 2 ), into helically shaped polymer intermediates and chevron-type GNRs on Au(111) by combining scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory simulations. The fluorinated precursors do not adsorb on the Au(111) surface at lower temperatures, necessitating an optimum substrate temperature to achieve maximum polymer and GNR lengths. We compare the adsorption behavior with that of pristine chevron precursors and discuss the effects of C-H and C-F bonds. The results elucidate the growth mechanism of GNRs with fluorine-bearing precursors and establish a foundation for future synthesis of GNRs on nonmetallic substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress in titania nanoparticles: An atomistic study

Stress engineering is becoming an increasingly important method for controlling electronic, optical, and magnetic properties of nanostructures, although the concept of stress is poorly defined at the nanoscale. We outline a methodology for computing bulk and surface stress in nanoparticles using atomistic simulation. The method is applicable to ionic and non- ionic materials alike and may be extended to other nanostructures. We apply it to spherical anatase nanoparticles ranging from 2 to 6 nm in diameter and obtain a surface stress of 0.89 N/m, in agreement with experimental measurements. Based on the extent that stress inhomogeneities at the surface are transmitted into the bulk, two characteristic length-scales are identified: below 3 nm bulk and surface regions cannot be defined and the available analytic theories for stress are not applicable, and above about 5 nm the stress becomes well-described by the theoretical Young-Laplace equation. The effect of a net surface charge on the bulk stress is also investigated. It is found that moderate surface charges can induce significant bulk stresses, on the order of 100 MPa, in nanoparticles within this size range.

molecular dynamics simulations↗

Cathode effects in cylindrical Hall thrusters

Stable operation of a cylindrical Hall thruster has been achieved using a hot wire cathode, which functions as a controllable electron emission source. It is shown that as the electron emission from the cathode increases with wire heating, the discharge current increases, the plasma plume angle reduces, and the ion energy distribution function shifts toward higher energies. The observed effect of cathode electron emission on thruster parameters extends and clarifies performance improvements previously obtained for the overrun discharge current regime of the same type of thruster, but using a hollow cathode neutralizer. Once thruster discharge current saturates with wire heating, further filament heating does not affect other discharge parameters. The saturated values of thruster discharge parameters can be further enhanced by optimal placement of the cathode wire with respect to the magnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferroelectric Based Technologies for Accelerators

Ferroelectrics have unique intrinsic properties that make them extremely attractive for high-energy accelerator applications. Low loss ferroelectric materials can be used as key elements in RF tuning and phase shifting components to provide fast, electronic control. These devices are under development for different accelerator applications for the X, Ka and L-frequency bands. The exact design of these devices depends on the electrical parameters of the particular ferroelectric material to be used--its dielectric constant, loss tangent and tunability. BST based ferroelectric-oxide compounds have been found to be suitable materials for a fast electrically-controlled tuners. We present recent results on the development of BST based ferroelectric compositions synthesized for use in high power technology components. The BST(M) ferroelectrics have been tested using both transverse and parallel dc bias fields to control the permittivity. Fast switching of a newly developed material has been shown and the feasibility of using of ferroelectric-based accelerator components in vacuum and in air has been demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗