Search NASA⌕ Search

SEARCH · Search NASA

Results for “double sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

IDENTIFICATION OF OUTFLOWS AND CANDIDATE DUAL ACTIVE GALACTIC NUCLEI IN SDSS QUASARS AT z = 0.8-1.6

We present a sample of 131 quasars from the Sloan Digital Sky Survey at redshifts 0.8 < z < 1.6 with double peaks in either of the high-ionization narrow emission lines [Ne V] {lambda}3426 or [Ne III] {lambda}3869. These sources were selected with the intention of identifying high-redshift analogs of the z < 0.8 active galactic nuclei (AGNs) with double-peaked [O III] {lambda}5007 lines, which might represent AGN outflows or dual AGNs. Lines of high ionization potential are believed to originate in the inner, highly photoionized portion of the narrow line region, and we exploit this assumption to investigate the possible kinematic origins of the double-peaked lines. For comparison, we measure the [Ne V] {lambda}3426 and [Ne III] {lambda}3869 double peaks in low-redshift (z < 0.8) [O III]-selected sources. We find that [Ne V] {lambda}3426 and [Ne III] {lambda}3869 show a correlation between line splitting and line width similar to that of [O III] {lambda}5007 in other studies, and the velocity splittings are correlated with the quasar Eddington ratio. These results suggest an outflow origin for at least a subset of the double peaks, allowing us to study the high-ionization gas kinematics around quasars. However, we find that a non-negligible fraction of our sample show no evidence for an ionization stratification. For these sources, the outflow scenario is less compelling, leaving the dual AGN scenario as a viable possibility. Finally, we find that our sample shows an anti-correlation between the velocity-offset ratio and luminosity ratio of the components, which is a potential dynamical argument for the presence of dual AGNs. Therefore, this study serves as a first attempt at extending the selection of candidate dual AGNs to higher redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

The large-volume high-pressure facility at GSECARS: A 'Swiss-army-knife' approach to synchrotron-based experimental studies

A number of new techniques have been developed at the large-volume press (LVP) high-pressure facility at the GeoSoilEnviroCARS (GSECARS) sector of the advanced photon source (APS). This article describes the 10 MN (1000 T) and 2.5 MN (250 T) hydraulic presses in the insertion device (ID) and bending magnet (BM) beamlines, respectively, with several apparatus and various diffraction and imaging techniques developed since the inception of the facility. Several Kawai-type high-pressure modules, whose second-stage anvils range from 10 mm to 25.4 mm in edge lengths, are used in the hydraulic presses, with pressure (P) and temperature (T) capabilities up to 30 GPa and 3000 K. A DIA-type apparatus can be compressed in both presses for studies requiring large sample volumes. A deformation DIA (D-DIA) has been developed to allow controlled deformation studies on both crystalline and glass materials, using monochromatic diffraction and imaging, up to 20 GPa and 1800 K. A high-pressure tomography apparatus is available for conducting tomography studies at high P and T, with a typical spatial resolution of a few micrometers. Toroidal anvil modules provide large 2{theta} angles for studies of non-crystalline materials, and a new large D-DIA module is under construction for double-stage megabar pressure generation as well as deformation on large samples with the capability of acoustic emission detection. The flexible design of the monochromator at the BM beamline makes it feasible to switch between monochromatic and white-beam mode during an experiment, ideal for monochromatic imaging studies (e.g., high-P tomography) with energy-dispersive diffraction for pressure measurements. A new angle-dispersive diffraction technique has been developed for high P-T crystallography studies, where a solid-state detector is step-scanned, thereby collecting a large number of angle-dispersive spectra over a wide range of photon energies recorded in the multi-channel analyzer. An ultrasonic interferometer is available and has been used in several high-pressure modules for acoustic velocity measurements. These unique features allow world-wide users to select the best experimental techniques for tackling a wide range of problems relevant to earth and planetary science, materials science, physics, and chemistry. Scientific highlights are provided and future improvements and prospects are discussed.

43 PARTICLE ACCELERATORS↗

3H And 90Sr In Urine Radiobioassay Intercomparison Results From The Intercomparison Studies Program At Oak Ridge National Laboratory: Statistical Analysis Of Laboratory Performance

The Intercomparison Studies Program (ISP) at the Oak Ridge National Laboratory (ORNL, Oak Ridge, TN USA) provides natural-matrix human urine quality-assurance/quality-control (QA/QC) samples to radiobioassay analysis laboratories. Samples are provided to these laboratories as 'single-blind' or 'double-blind' unknowns, spiked with radioactive-solution standards at 'low' levels (e.g., 0.7-7 Bq g{sup -1} for {sup 3}H and 0.7-7 Bq kg{sup -1} for {sup 90}Sr). Participants use the results as a tool for self-evaluation and a measure of performance. In this paper, sample preparation and the results of testing during the years 2001-2005 for {sup 3}H and {sup 90}Sr are presented and discussed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Measurement of Charged Current Inclusive $\bar{V}_\mu$ Interactions and 2p2h Contribution Using the NOvA Near Detector

More precise measurements of the scattering of antineutrinos on nuclei in the few GeV region of incident energy, $E_{\nu}$, can reveal new aspects of $v/\bar{v}$ interactions and of nuclear structure, while providing information crucial to continued progress by neutrino oscillation experiments. This Thesis reports an investigation of charged current $\bar{v}_\mu$ interactions in the predominantly hydrocarbon medium of the NOvA Near Detector. The data are obtained with the detector exposed to a narrow-band $\bar{v}$ µ beam with spectral peak at E ν = 2.0 GeV, for a total accumulated exposure of 12.5×10$^{20}$ protons-on-target. The analysis expresses results in terms of three-momentum transfer,|$\vec{q}$| and available hadronic energy, $E$ avail . These variables approximate (q 0 , |$\vec{q}$|), the variables used in theoretical treatments of lepton scattering on multi-nucleon systems such as in 2-particle-2-hole (2p2h) processes. This Thesis delivers two core measurements: Firstly, the double-dierential cross section $d^2σ/d|\vec{q} |dE_{avail}$ for inclusive CC $\bar{v}_\mu$ interactions in the NOvA detector medium is obtained. The cross section has a roughly gaussian shape in its projection onto |$\vec{q}$|, while being largely concentrated at values of $E$ avail below 100 MeV. The single diferential cross sections dσ/d|$\vec{q}$| and dσ/dE avail are also obtained, and are compared to predictions based on the GENIE v3.0.6 neutrino generator augmented with four different implementations of 2p2h reactions. Secondly, the contribution of 2p2h reactions to the CC inclusive scattering sample is determined. Its presence is characterized in terms of double-differential and single-differential cross sections. The latter 2p2h distributions are compared to predictions from two experimental data-tune models and from two theory-based models, namely the SuSAv2 model and the Valencia model. Both of the theoretical models underpredict the measured cross-section strength and predict a shape for dσ/d|$\vec{q}$| that is flatter than the measured shape. Thus, this Thesis provides new information about CC antineutrino-nucleus scattering in the vicinity of Eν ~ 2 GeV, and it highlights improvements that are needed in theoretical treatments of 2p2h reactions.

43 PARTICLE ACCELERATORS↗

Catalyst layer formulations for slot-die coating of PEM fuel cell electrodes

The series of electrodes were fabricated by the scalable and manufacturable slot-die coating method for proton exchange membrane fuel cell (PEMFC) application. The inks with different amounts of solids were studied by rheological methods in order to establish a coating window with minimum manufacturing defects. The obtained electrodes were characterized by SEM, AFM, and optical microscopy, which showed that they were uniform and homogeneous with minimum defects. The electrochemical evaluation of the manufactured gas diffusion electrodes (GDE) showed that the main characteristics of the electrodes, like electrochemical surface area, proton resistivity, and double layer capacitance, were found to be close for all samples confirming the reproducibility of the slot-die process. Additionally, we studied the effects of membrane thickness on the performance of the GDE membrane electrode assemblies and determined that a decrease in membrane thickness favored the performance. Furthermore, the obtained results clearly demonstrated the applicability and feasibility of the approach for the Manufacturing of catalyst layers for the fuel cell application with potential for future mass production.

08 HYDROGEN↗

Preparation of activated carbon from sorghum pith and its structural and electrochemical properties

Research highlights: {yields} Sorghum pith as the cost effective raw material for activated carbon preparation. {yields} Physicochemical method/KOH activation for preparation of activated carbon is inexpensive. {yields} Activated carbon having lower surface area surprisingly delivered a higher specific capacitance. {yields} Treated at 500 {sup o}C activated carbon exceeds maximum specific capacitances of 320.6 F/g at 10 mV/s. -- Abstract: The cost effective activated carbon (AC) has been prepared from sorghum pith by NaOH activation at various temperatures, including 300 {sup o}C (AC1), 400 {sup o}C (AC2) and 500 {sup o}C (AC3) for the electrodes in electric double layer capacitor (EDLC) applications. The amorphous nature of the samples has been observed from X-ray diffraction and Raman spectral studies. Subsequently, the surface functional groups, surface morphology, pore diameter and specific surface area have been identified through FT-IR, SEM, histogram and N{sub 2} adsorption/desorption isotherm methods. The electrochemical characterization of AC electrodes has been examined using cyclic voltammetry technique in the potential range of -0.1-1.2 V in 1.0 M H{sub 2}SO{sub 4} electrolyte at different scan rates (10, 20, 30, 40, 50 and 100 mV/s). The maximum specific capacitances of 320.6 F/g at 10 mV/s and 222.1 F/g at 100 mV/s have been obtained for AC3 electrode when compared with AC1 and AC2 electrodes. Based on the characterization studies, it has been inferred that the activated carbon prepared from sorghum pith may be one of the innovative carbon electrode materials for EDLC applications.

36 MATERIALS SCIENCE↗

Surface Modification of Silicon Pillar Arrays To Enhance Fluorescence Detection of Uranium and DNA

There is an ever-growing need for detection methods that are both sensitive and efficient, such that reagent and sample consumption is minimized. Nanopillar arrays offer an attractive option to fill this need by virtue of their small scale in conjunction with their field enhancement intensity gains. This work investigates the use of nanopillar substrates for the detection of the uranyl ion and DNA, two analytes unalike but for their low quantum efficiencies combined with the need for high-throughput analyses. Here in this paper, the adaptability of these platforms was explored, as methods for the successful surface immobilization of both analytes were developed and compared, resulting in a limit of detection for the uranyl ion of less than 1 ppm with a 0.2 μL sample volume. Moreover, differentiation between single-stranded and double-stranded DNA was possible, including qualitative identification between double-stranded DNA and DNA of the same sequence, but with a 10-base-pair mismatch.

36 MATERIALS SCIENCE↗

Plasma Immersion Ion Implantation with Solid Targets for Space and Aerospace Applications

This paper describes successful results obtained by a new type of plasma source, named as Vaporization of Solid Targets (VAST), for treatment of materials for space and aerospace applications, by means of plasma immersion ion implantation and deposition (PIII and D). Here, the solid element is vaporized in a high pressure glow discharge, being further ionized and implanted/deposited in a low pressure cycle, with the aid of an extra electrode. First experiments in VAST were run using lithium as the solid target. Samples of silicon and aluminum alloy (2024) were immersed into highly ionized lithium plasma, whose density was measured by a double Langmuir probe. Measurements performed with scanning electron microscopy (SEM) showed clear modification of the cross-sectioned treated silicon samples. X-ray photoelectron spectroscopy (XPS) analysis revealed that lithium was implanted/deposited into/onto the surface of the silicon. Implantation depth profiles may vary according to the condition of operation of VAST. One direct application of this treatment concerns the protection against radiation damage for silicon solar cells. For the case of the aluminum alloy, X-ray diffraction analysis indicated the appearance of prominent new peaks. Surface modification of A12024 by lithium implantation/deposition can lower the coefficient of friction and improve the resistance to fatigue of this alloy. Recently, cadmium was vaporized and ionized in VAST. The main benefit of this element is associated with the improvement of corrosion resistance of metallic substrates. Besides lithium and cadmium, VAST allows to performing PIII and D with other species, leading to the modification of the near-surface of materials for distinct purposes, including applications in the space and aerospace areas.

36 MATERIALS SCIENCE↗

FREE SURFACE VELOCIMETRY CORRECTIONS FOR LOW PRESSURE SHOCKS

We consider how to interpret measured free surface velocities to estimate what a relatively weak shock (with an elastic-plastic two-wave structure, approx5-30 GPa) would have looked like in an infinite sample. Hysteresis and nonlinear wave interactions introduce effects (inexact velocity doubling and the delay, partial reflection, and reverberation of waves) whose magnitudes can be estimated with simple models. We argue, and demonstrate in a simulated test case, that these estimates can eliminate most of the systematic error introduced by the free surface during loading.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ON THE RATES OF TYPE Ia SUPERNOVAE IN DWARF AND GIANT HOSTS WITH ROTSE-IIIb

We present a sample of 23 spectroscopically confirmed Type Ia supernovae (SNe Ia) that were discovered in the background of galaxy clusters targeted by ROTSE-IIIb and use up to 18 of these to determine the local (z-bar 0.05) volumetric rate. Since our survey is flux limited and thus biased against fainter objects, the pseudo-absolute magnitude distribution (pAMD) of SNe Ia in a given volume is an important concern, especially the relative frequency of high- to low-luminosity SNe Ia. We find that the pAMD derived from the volume-limited Lick Observatory Supernova Search (LOSS) sample is incompatible with the distribution of SNe Ia in a volume-limited (z < 0.12) sub-sample of the Sloan Digital Sky Survey II (SDSS-II). The LOSS sample requires far more low-luminosity SNe Ia than the SDSS-II can accommodate. Even though LOSS and SDSS-II have sampled different SNe Ia populations, their volumetric rates are surprisingly similar. Using the same model pAMD adopted in the SDSS-II SNe Ia rate calculation and excluding two high-luminosity SNe Ia from our sample, we derive a rate that is marginally higher than previous low-redshift determinations. With our full sample and the LOSS pAMD, our rate is more than double the canonical value. We also find that 5 of our 18 SNe Ia are hosted by very low luminosity (M{sub B} > -16) galaxies, whereas only 1 out of 79 nearby SDSS-II SNe Ia have such faint hosts. It is possible that previous works have undercounted either low-luminosity SNe Ia, SNe Ia in low-luminosity hosts, or peculiar SNe Ia (sometimes explicitly), and the total SNe Ia rate may be higher than the canonical value.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINING DUST AND COLOR VARIATIONS OF HIGH-z SNe USING NICMOS ON THE HUBBLE SPACE TELESCOPE

We present data from the Supernova Cosmology Project for five high redshift Type Ia supernovae (SNe Ia) that were obtained using the NICMOS infrared camera on the Hubble Space Telescope. We add two SNe from this sample to a rest-frame I-band Hubble diagram, doubling the number of high redshift supernovae on this diagram. This I-band Hubble diagram is consistent with a flat universe ({omega}{sub M}, {omega}{sub {lambda}}) = (0.29, 0.71). A homogeneous distribution of large grain dust in the intergalactic medium (replenishing dust) is incompatible with the data and is excluded at the 5{sigma} confidence level, if the SN host galaxy reddening is corrected assuming R{sub V} = 1.75. We use both optical and infrared observations to compare photometric properties of distant SNe Ia with those of nearby objects. We find generally good agreement with the expected color evolution for all SNe except the highest redshift SN in our sample (SN 1997ek at z = 0.863) which shows a peculiar color behavior. We also present spectra obtained from ground-based telescopes for type identification and determination of redshift.

99 GENERAL AND MISCELLANEOUS↗

SPATIALLY RESOLVED H{alpha} MAPS AND SIZES OF 57 STRONGLY STAR-FORMING GALAXIES AT z {approx} 1 FROM 3D-HST: EVIDENCE FOR RAPID INSIDE-OUT ASSEMBLY OF DISK GALAXIES

We investigate the buildup of galaxies at z {approx} 1 using maps of H{alpha} and stellar continuum emission for a sample of 57 galaxies with rest-frame H{alpha} equivalent widths >100 A in the 3D-HST grism survey. We find that the H{alpha} emission broadly follows the rest-frame R-band light but that it is typically somewhat more extended and clumpy. We quantify the spatial distribution with the half-light radius. The median H{alpha} effective radius r{sub e} (H{alpha}) is 4.2 {+-} 0.1 kpc but the sizes span a large range, from compact objects with r{sub e} (H{alpha}) {approx} 1.0 kpc to extended disks with r{sub e} (H{alpha}) {approx} 15 kpc. Comparing H{alpha} sizes to continuum sizes, we find =1.3 {+-} 0.1 for the full sample. That is, star formation, as traced by H{alpha}, typically occurs out to larger radii than the rest-frame R-band stellar continuum; galaxies are growing their radii and building up from the inside out. This effect appears to be somewhat more pronounced for the largest galaxies. Using the measured H{alpha} sizes, we derive star formation rate surface densities, {Sigma}{sub SFR}. We find that {Sigma}{sub SFR} ranges from {approx}0.05 M{sub Sun} yr{sup -1} kpc{sup -2} for the largest galaxies to {approx}5 M{sub Sun} yr{sup -1} kpc{sup -2} for the smallest galaxies, implying a large range in physical conditions in rapidly star-forming z {approx} 1 galaxies. Finally, we infer that all galaxies in the sample have very high gas mass fractions and stellar mass doubling times <500 Myr. Although other explanations are also possible, a straightforward interpretation is that we are simultaneously witnessing the rapid formation of compact bulges and large disks at z {approx} 1.

79 ASTRONOMY AND ASTROPHYSICS↗

CONNECTIONS BETWEEN GALAXY MERGERS AND STARBURST: EVIDENCE FROM THE LOCAL UNIVERSE

Major mergers and interactions between gas-rich galaxies with comparable masses are thought to be the main triggers of starburst. In this work, we study, for a large stellar mass range, the interaction rate of the starburst galaxies in the local universe. We focus independently on central and satellite star forming galaxies extracted from the Sloan Digital Sky Survey. Here the starburst galaxies are selected in the star formation rate (SFR) stellar mass plane with SFRs five times larger than the median value found for ''star forming'' galaxies of the same stellar mass. Through visual inspection of their images together with close companions determined using spectroscopic redshifts, we find that ∼50% of the ''starburst'' populations show evident merger features, i.e., tidal tails, bridges between galaxies, double cores, and close companions. In contrast, in the control sample we selected from the normal star forming galaxies, only ∼19% of galaxies are associated with evident mergers. The interaction rates may increase by ∼5% for the starburst sample and 2% for the control sample if close companions determined using photometric redshifts are considered. The contrast of the merger rate between the two samples strengthens the hypothesis that mergers and interactions are indeed the main causes of starburst.

79 ASTRONOMY AND ASTROPHYSICS↗

Persistence of charge density wave fluctuations in the absence of long-range order in a hole-doped kagome metal

The kagome metals 𝐴⁢V 3 ⁢Sb 5 (𝐴=K, Rb, Cs) exhibit a complex interplay between charge density wave (CDW) order and superconductivity. Here, in this study, we use ultrafast coherent phonon spectroscopy to probe the evolution of CDW order in hole-doped CsV 3 ⁢Sb 5−𝑥 ⁢Sn 𝑥 across a broad range of compositions (0 ≤ 𝑥 ≤ 0.68). While thermodynamic and diffraction measurements show long-range CDW order vanishes above 𝑥 ≈ 0.05, we observe persistent signatures of CDW fluctuations up to the highest doping levels, with correlation times on the order of several picoseconds. These results indicate the presence of a robust fluctuating charge order that survives well beyond the established CDW phase boundary. Furthermore, these fluctuations are enhanced near a doping-tuned quantum phase transition at 𝑥* ≈ 0.15, which coincides with a local minimum in the superconducting 𝑇 c double-dome. Additional measurements on Ti- and K-substituted samples confirm that this behavior is intrinsic to hole doping and not tied to disorder. Overall, our findings suggest that CDW fluctuations play a central role in the electronic phase diagram of 𝐴⁢V 3 ⁢Sb 5 and may mediate or compete with superconductivity.

Kongruengkit, Terawit [Univ. of California, Santa ↗

Neutron Characterization of Encapsulated ATF-1/LANL-1 Mockup Fuel Capsules

Twenty pellets of mock-up accident tolerant fuels UN-U3Si5 were produced at LANL and loaded in two rodlet/capsule assemblies. Tomographic imaging and diffraction measurements were performed to characterize these samples at the Flight-Path 5 and HIPPO beam lines at LANSCE/LANL between November 2016 and January 2017 as well as in August 2017. The entire ~10 cm long, ~1 cm diameter fuel volume could be characterized, however due to time constraints only 2 mm slices in 4mm increments were characterized with neutron diffraction and a 28mm subset of the entire sample was characterized with energy-resolved neutron imaging. The double encapsulation of the fuel into two steel containers does not pose a problem for the neutron analysis and the methods could be applied to enriched as well irradiated fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The ELM Survey. VII. Orbital properties of low-mass white dwarf binaries

We present the discovery of 15 extremely low-mass (5<logg<7) white dwarf (WD) candidates, 9 of which are in ultra-compact double-degenerate binaries. Our targeted extremely low-mass Survey sample now includes 76 binaries. The sample has a lognormal distribution of orbital periods with a median period of 5.4 hr. The velocity amplitudes imply that the binary companions have a normal distribution of mass with 0.76 M{sub ⊙} mean and 0.25 M{sub ⊙} dispersion. Thus extremely low-mass WDs are found in binaries with a typical mass ratio of 1:4. Statistically speaking, 95% of the WD binaries have a total mass below the Chandrasekhar mass, and thus are not type Ia supernova progenitors. Yet half of the observed binaries will merge in less than 6 Gyr due to gravitational wave radiation; probable outcomes include single massive WDs and stable mass transfer AM CVn binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

Latest results from the MINOS experiment

The MINOS experiment utilizes the NuMI neutrino beam to study the phenomenon of neutrino oscillations. Muon neutrinos are sent over a baseline of 735 km, with a detector near the production point at Fermilab and one at the Soudan underground laboratory in northern Minnesota. By observing the {nu}{sub {mu}} disappearance characteristic of oscillations, MINOS can measure the oscillation parameters. MINOS has previously made the best measurement of the atmospheric-regime mass splitting to date. New results are presented in which the data-set is doubled. Further analysis improvements, and the inclusion of additional event samples, further improve the sensitivity to the oscillation parameters. The mixing angle {theta}{sub 13} is currently not measured to differ from zero. By searching for {nu}{sub e} appearance in the {nu}{sub {mu}} beam, MINOS is able to set new limits on the value of {theta}{sub 13}. An observation of the neutral current interaction rate at the far detector allows limits to be placed on the existence of sterile neutrinos. From September 2009 to March 2010, MINOS has taken data with a dedicated {bar {nu}}{sub {mu}} beam, allowing the first direct precision measurement of the antineutrino oscillation parameters in the atmospheric regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗