Search NASA⌕ Search

SEARCH · Search NASA

Results for “double shell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

PDG: A Composite Method Based on the Resolution of the Identity

The Gaussian-3 (G3) composite approach for thermochemical properties is revisited in light of the enhanced computational efficiency and reduced memory costs by applying the resolution-of-the-identity (RI) approximation for two-electron repulsion integrals (ERIs) to the computationally demanding component methods in the G3 model: the energy and gradient computations via the second-order Møller–Plesset perturbation theory (MP2) and the energy computations using the coupled-cluster singles–doubles method augmented with noniterative triples corrections [CCSD(T)]. Efficient implementation of the RI-based methods is achieved by employing a hybrid distributed/shared memory model based on MPI and OpenMP. The new variant of the G3 composite approach based on the RI approximation is termed the RI-G3 scheme, or alternatively the PDG method. The accuracy of the new RI-G3/PDG scheme is compared to the “standard” G3 composite approach that employs the memory-expensive four-center ERIs in the MP2 and CCSD(T) calculations. Taking the computation of the heats of formation of the closed-shell molecules in the G3/99 test set as a test case, it is demonstrated that the RI approximation introduces negligible changes to the mean absolute errors relative to the standard G3 model (less than 0.1 kcal/mol), while the standard deviations remain unaltered. Furthermore, the efficiency and memory requirements for the RI-MP2 and RI-CCSD(T) methods are compared to the standard MP2 and CCSD(T) approaches, respectively. The hybrid MPI/OpenMP-based RI-MP2 energy plus gradient computation is found to attain a 7.5× speedup over the standard MP2 calculations. For the most demanding CCSD(T) calculations, the application of the RI approximation is found to nearly halve the memory demand, confer about a 4–5× speedup for the CCSD iterations, and reduce the computational time for the compute-intensive triples correction step by several hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

National Opacity Program: Analysis of Opacity-relevant X-ray Emission Spectra (Milestone Report ID 7121)

We have produced high energy density iron plasmas at temperatures above 1 keV and electron densities exceeding 1023 cm -3 (~ 1 g/cm 3 ) using the Orion laser at the Atomic Weapons Establishment. These plasmas were created by irradiating 50 µm diameter layered targets with frequency doubled (λ = 527 nm), 1 ps laser pulses focused to a 100 µm diameter producing an irradiance of ~ 2 x 10 18 W/cm 2 . The buried layer targets consist of 160 nm iron sulfide (FeS), 60 nm potassium chloride (KCl), and 15 nm carbon. The combined layers are tamped on both sides with 3 µm of parylene-N. The x-ray emission from the plasma was measured using two time-resolved, and four time-integrated Bragg crystal spectrometers, as well as one time-integrated imaging system. One time-resolved x-ray spectrometer measured emission from L-shell transitions in highly charged iron, the other from K-shell transitions in helium-like S 14+ and hydrogen-like S 15+ . The time-integrated spectrometers are intensity-calibrated and measured emission from K-shell transitions in sulfur, potassium, chlorine, and both K-shell and L-shell transitions in iron. The density and temperature of the plasma were determined by modeling the x-ray spectra using different spectral and hydrodynamic modeling packages. A brief overview of the uncertainties associated with the measurements and models are presented. We also give an overview of our 1-D HYDRA-DCA radiation-hydrodynamics model and improvements for future work. Our results aid in assessing experimental uncertainties associated with plasma uniformity and with x-ray emission employed as diagnostics in opacity experiments at temperatures and densities not achievable elsewhere and represent a significant step in creating and diagnosing plasmas near LTE. These results are summarized as part of the completion requirements for milestone 7121

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

An alternative viewpoint on the nuclear structure towards 100 Sn: Lifetime measurements in 105 Sn

This work aims at presenting an alternative approach to the long standing problem of the B(E2) values in Sn isotopes in the vicinity of the N=Z double-magic nucleus 100 Sn, until now predominantly measured with relativistic and intermediate-energy Coulomb excitation reactions. The direct measurement of the lifetime of low-lying excited states in odd-even Sn isotopes provides a new and precise guidance for the theoretical description of the nuclear structure in this region. Lifetime measurements have been performed in 105 Sn for the first time with the coincidence Recoil Distance Doppler Shift technique. The lifetime results for the $7/2^+_1$ first excited state and the $11/2^+_1$ state, $2^+ (^{104}$Sn) Ⓧ $v1g_{7/2}$ multiplet member, are discussed in comparison with state-of-the-art shell model and mean field calculations, highlighting the crucial contribution of proton excitation across the core of 100 Sn. The reduced transition probability B(E2) of the $11/2^+_1$ core-coupled state points out an enhanced staggering with respect to the B(E2; $2^+_1$ → $0^+_1$) in the even-mass 104 Sn and 106 Sn isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Observation of Double Excitations in the Resonant Inelastic X-ray Scattering of Nitric Oxide

The nitrogen K-edge resonant inelastic X-ray scattering (RIXS) map of nitric oxide (NO) has been measured and simulated to provide a detailed analysis of the observed features. High-resolution experimental RIXS maps were collected using an in situ gas flow cell and a high-transmission soft X-ray spectrometer. Accurate descriptions of the ground, excited, and core-excited states are based upon restricted active space self-consistent-field calculations using second order multiconfigurational perturbation theory. The nitrogen K-edge RIXS map of NO shows a range of features that can be assigned to intermediate states arising from 1s → π* and 1s → Rydberg excitations; additional bands are attributed to doubly excited intermediate states comprising 1s → π* and π → π* excitations. These results provide a detailed picture of RIXS for an open-shell molecule and an extensive description of the core-excited electronic structure of NO, an important molecule in many chemical and biological processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic structure analysis and DFT benchmarking of Rydberg-type alkali-metal-crown ether, -cryptand, and -adamanzane complexes

Density functional theory (DFT) and electron propagator theory (EPT) calculations were performed to study ground and excited electronic structures of alkali-metal (M) coordinated 9-crown-3, 24-crown-8, [2.1.1]cryptand, o-Me 2 -1.1.1, and 3 6 Adamanzane complexes. Each complex bears an expanded electron in the periphery and occupies diffuse 1p-, 1d-, 1f-type molecular orbitals (or superatomic 1P, 1D, 1F orbitals) in excited electronic states. The calculated superatomic shell model of the M(9-crown-3) 2 is 1S, 1P, 1D, 1F, 2S, 2P, 2D, 1G and it is held by all other complexes up to the studied 1F level. Due to the highly diffuse nature of the electron, the ionization energies of these complexes are significantly lower (1.6–2.0 eV) and hence these complexes belong to the superalkali category. Further, the ab initio EPT ionization energy and the excitation energies of the Li(9-crown-3) 2 were used to evaluate DFT errors associated with a series of exchange correlation functionals that span multiple rungs of Jacob's ladder (i.e., GGA, meta-GGA, global GGA hybrid, meta-GGA hybrid, range-separated hybrid, double-hybrid). Among these, the best performing functional is the range-separated hybrid CAM-B3LYP and the errors are within 6% of high-level ab initio EPT results. The accuracy of CAM-B3LYP is indeed transferable to similar complexes and hence the findings are expected to accelerate the progression of studies of Rydberg-type systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tetragonal BaCoO 3 : A Co 4+ Ferromagnetic Mott Insulator

We report the stabilization of the metastable body-centered tetragonal (BCT) phase of BaCoO 3 (BCT-BaCoO 3 ) under high-pressure (15 GPa) and hightemperature (1200 °C) conditions using a mixture precursor. This double perovskite adopts the EuTiO 3 -type structure (space group I4/mcm), as confirmed by powder Xray diffraction and high-resolution STEM. X-ray photoelectron spectroscopy indicates a predominant Co 4+ oxidation state without detectable oxygen vacancies. Magnetization and heat capacity measurements reveal ferromagnetic ordering at T C ∼ 107 K, attributable to the BCT-BaCoO 3 phase. Above this temperature, the mixed-phase sample exhibits Curie−Weiss paramagnetism, a low-spin to high-spin crossover upon cooling, and a possible intermediate-spin state at elevated temperatures. Resistivity data indicates insulating behavior with weak magnetoresistance. DFT and DFT + DMFT calculations suggest that the insulating state originates from an orbitally selective transition sensitive to the nominal valence of the Co-d shell. The metastable BCT-BaCoO 3 phase cannot be retained in pure form at ambient pressure but can be stabilized by embedding it in a disordered mixture, offering a potential route to discover and preserve other high-pressure phases under ambient conditions.

Magnetic properties↗
NASA NTRS2013

A Panchromatic View of the Restless SN 2009ip Reveals the Explosive Ejection of a Massive Star Envelope

The double explosion of SN 2009ip in 2012 raises questions about our understanding of the late stages of massive star evolution. Here we present a comprehensive study of SN 2009ip during its remarkable rebrightenings. High-cadence photometric and spectroscopic observations from the GeV to the radio band obtained from a variety of ground-based and space facilities (including the Very Large Array, Swift, Fermi, Hubble Space Telescope, and XMM) constrain SN 2009ip to be a low energy (E (is) approximately 10(exp 50) erg for an ejecta mass approximately 0.5 solar mass) and asymmetric explosion in a complex medium shaped by multiple eruptions of the restless progenitor star. Most of the energy is radiated as a result of the shock breaking out through a dense shell of material located at approximately 5 × 10( exp 14) cm with M approximately 0.1 solar mass, ejected by the precursor outburst approximately 40 days before the major explosion. We interpret the NIR excess of emission as signature of material located further out, the origin of which has to be connected with documented mass-loss episodes in the previous years. Our modeling predicts bright neutrino emission associated with the shock break-out if the cosmic-ray energy is comparable to the radiated energy. We connect this phenomenology with the explosive ejection of the outer layers of the massive progenitor star, which later interacted with material deposited in the surroundings by previous eruptions. Future observations will reveal if the massive luminous progenitor star survived. Irrespective of whether the explosion was terminal, SN 2009ip brought to light the existence of new channels for sustained episodic mass loss, the physical origin of which has yet to be identified.

view↗
NASA NTRS2013

A Panchromatic View of the Restless SN 2009ip Reveals the Explosive Ejection of a Massive Star Envelope

The double explosion of SN 2009ip in 2012 raises questions about our understanding of the late stages of massive star evolution. Here we present a comprehensive study of SN 2009ip during its remarkable rebrightenings. High-cadence photometric and spectroscopic observations from the GeV to the radio band obtained from a variety of ground-based and space facilities (including the Very Large Array, Swift, Fermi, Hubble Space Telescope, and XMM) constrain SN 2009ip to be a low energy (E approximating 10(exp 50) ergs for an ejecta mass approximating 0.5 M solar mass) and asymmetric explosion in a complex medium shaped by multiple eruptions of the restless progenitor star. Most of the energy is radiated as a result of the shock breaking out through a dense shell of material located at approximately 5 times 10 (exp 14) cm with M approximating 0.1 solar mass, ejected by the precursor outburst approximately 40 days before the major explosion. We interpret the NIR (Near Infrared) excess of emission as signature of material located further out, the origin of which has to be connected with documented mass-loss episodes in the previous years. Our modeling predicts bright neutrino emission associated with the shock break-out if the cosmic-ray energy is comparable to the radiated energy. We connect this phenomenology with the explosive ejection of the outer layers of the massive progenitor star, which later interacted with material deposited in the surroundings by previous eruptions. Future observations will reveal if the massive luminous progenitor star survived. Irrespective of whether the explosion was terminal, SN 2009ip brought to light the existence of new channels for sustained episodic mass loss, the physical origin of which has yet to be identified.

massive↗
NASA NTRS2011

Issues and Design Drivers for Deep Space Habitats

A cross-disciplinary team of scientists and engineers applied expertise gained in Lunar Lander development to the conceptual design of a long-duration, deep space habitat for Near Earth Asteroid (NEA) missions. The design reference mission involved two launches to assemble a 5-module vehicle for a 380-day round trip mission carrying 4 crew members. The conceptual design process yielded a number of interesting debates, some of which could be significant design drivers in a detailed Deep Space Habitat (DSH) design. These issues include: a) Launch loads: Potentially drives layout of equipment mounted to module floors or walls, and whether temporary internal structure is required to distribute launch loads to minimize shell mass; b) Unmanned loiter time: When added to an already lengthy mission, loiter time further drives risk and reliability, and poses issues for equipment shelf life such as material degradation or cryogenic fluids boil-off; c) Pointing and Visibility: A habitat embedded in a 5-module stack may drive Communications, Tracking, Guidance, and Navigation equipment out onto long booms to maintain line-of-sight visibility with targets. However, long booms will be more susceptible to disruption from exercise-induced vibration, potential damage during docking/undocking operations, and increased power distribution mass; d) Water: although it is assumed that a water processor will collect and recycle water, several interesting question were posed, such as: How much water to start with? Should potable water serve double-duty as radiation protection? And if so, should it be stowed in a single large tank, or smaller, portable containers? e) Design for repairability: one of the worst-case scenarios identified was a cabin depressurization that required suited repair from inside the module, potentially driving the need for long umbilical hoses or special equipment to allow smaller, mated modules to be used as safe havens for up to 180 days;

Anderson, Molly S.↗
NASA NTRS1986

Optical and UV spectroscopy of the peculiar RS CVn system RT Lacertae

H-alpha and H-beta spectra of the peculiar double-lined RS CVn binary RT Lacertae have been obtained using the IUE, together with a ground-based coude-feed telescope at KPNO. The ground-based spectra show an asymmetry related to the orbital phase in the H-alpha profile. H-beta profiles showed excess emission in one hemisphere and excess absorption in the other, with a broad Gaussian emission component superposed on the excess H-alpha line. A radial velocity curve was derived to estimate the mass ratio and geometry of the system. It is shown that the component of RT Lac fills 80-90 percent of the equilibrium Roche surface. Low-resolution ultraviolet data show that the supposed cooler component is bluer than its companion, suggesting evidence of a scattering shell or a cloud produced by the splash of a gas stream. The phase behavior of the low resolution ultraviolet data support the conclusion that RT Lac is a mass transfer system and that mass transfer is the primary cause of its activity.

Huenemoerder, D. P.↗
NASA NTRS2011

Initiating Molecular Growth in the Interstellar Medium via Dimeric Complexes of Observed Ions and Molecules

A feasible initiation step for particle growth in the interstellar medium (ISM) is simulated by means of ab quantum chemistry methods. The systems studied are dimer ions formed by pairing nitrogen containing small molecules known to exist in the ISM with ions of unsaturated hydrocarbons or vice versa. Complexation energies, structures of ensuing complexes and electronic excitation spectra of the encounter complexes are estimated using various quantum chemistry methods. Moller-Plesset perturbation theory (MP2, Z-averaged perturbation theory (ZAP2), coupled cluster singles and doubles with perturbative triples corrections (CCSD(T)), and density functional theory (DFT) methods (B3LYP) were employed along with the correlation consistent cc-pVTZ and aug-cc-pVTZ basis sets. Two types of complexes are predicted. One type of complex has electrostatic binding with moderate (7-20 kcal per mol) binding energies, that are nonetheless significantly stronger than typical van der Waals interactions between molecules of this size. The other type of complex develops strong covalent bonds between the fragments. Cyclic isomers of the nitrogen containing complexes are produced very easily by ion-molecule reactions. Some of these complexes show intense ultraviolet visible spectra for electronic transitions with large oscillator strengths at the B3LYP, omegaB97, and equations of motion coupled cluster (EOM-CCSD) levels. The open shell nitrogen containing carbonaceous complexes especially exhibit a large oscillator strength electronic transition in the visible region of the electromagnetic spectrum.

Bera, Partha P.↗
DOE OSTI2019

Carbons with Regular Pore Geometry Yield Fundamental Insights into Supercapacitor Charge Storage

We conduct molecular dynamics simulations of electrical double-layer capacitors (EDLCs) using a library of ordered, porous carbon electrode materials called zeolite templated carbons (ZTCs). The well-defined pore shapes of the ZTCs enable us to determine the influence of pore geometry on both charging dynamics and charge storage mechanisms in EDLCs, also referred to as supercapacitors. We show that charging dynamics are negatively correlated with the pore-limiting diameter of the electrode material and display signatures of both progressive charging and ion trapping. However, the equilibrium capacitance, unlike charging dynamics, is not strongly correlated to commonly used, purely geometric descriptors such as pore size. Instead, we find a strong correlation of capacitance to the charge compensation per carbon (CCpC), a descriptor we define in this work as the average charge of the electrode atoms within the coordination shell of a counterion. A high CCpC indicates efficient charge storage, as the strong partial charges of the electrode are able to screen counterion charge, enabling higher ion loading and thus more charge storage within the electrode at a fixed applied voltage. We determine that adsorption sites with a high CCpC tend to be found within pockets with a smaller radius of curvature, where the counterions are able to minimize their distance with multiple points on the electrode surface, and therefore induce stronger local partial charges.

25 ENERGY STORAGE↗
DOE OSTI2022

β − decay of exotic P and S isotopes with neutron number near 28

β - decay of very neutron-rich isotopes of P and S, studied at the National Superconducting Cyclotron Laboratory (NSCL) using the Beta Counting Station (BCS) consisting of a Double Sided Strip Detector surrounded by clovers detectors for observing delayed γ transitions is reported here. β-decay half-lifes and delayed neutron emission probabilities were extracted for 42,43,44 P and 44,46 S by analyzing spatial and temporal correlations between implants and decay events in the Si detector with further coincidence with γ transitions. Detection of delayed γ rays allowed for the identification of negative parity 1p1h states in 42 S for the first time, also constraining the parent ( 42 P) spin/parity to 2 - or 3 - . For the most exotic isotope studied, 46 S, no strong γ transition was observed unlike lighter even-even S isotopes, thus implying the shift of Gamow Teller (GT) strength distribution to higher energies. In conclusion, comparison of experimental observations to detailed shell-model calculations using the SDPFSDG-MU interaction allowed us to infer the importance and role of First Forbidden (FF) β transitions as the neutron number approaches and then exceeds N = 28.

39 ≤ A ≤ 58↗
NASA NTRS1983

The peculiar radio galaxy 3C 433

Radio, optical and X-ray observations are presented of the peculiar radio galaxy 3C 433, a Seyfert 2 object with luminosity an order of magnitude greater than that expected from its complex, shell-type morphology. Observations conducted at 6 and 12 cm with the VLA and at 21 cm with the Westerbork telescope show a striking asymmetry between the northern and southern radio emissions, and an overall X-shaped morphology. Optical observations using the Video Camera and High Gain Video Spectrometer on the 4-m telescope and the Intensified Image Dissector Scanner on the 2.1-m telescope at Kitt Peak confirm the identification of the source with a pair of bright galaxies. Observations in the X-ray from the Einstein Observatory IPC reveal an unresolved source at the position of 3C 433, as well as two serendipitous X-ray sources. The observations may be used to explain the overall structure of the source either in terms of tidal torquing or precessing models of double galaxies; however, it is argued that the tidal torquing model requires fewer assumptions to account for the brightness asymmetry.

Van Breugel, W.↗
DOE OSTI2024

Low spin spectroscopy of neutron-rich Cl 43 , 44 , 45 via β - and β n decay

In this article, β - decay studies of neutron-rich isotopes 43,45 S performed at the National Superconducting Cyclotron Laboratory are reported. β -delayed $\gamma$ transitions were detected by an array of 16 clover detectors surrounding the Beta Counting Station, which consists of a 40×40 double-sided silicon strip detector followed by a single-sided silicon strip detector. β -decay half-lives were extracted for 43,45 S by correlating implants and decays in the pixelated implant detector and by considering further coincidences with $\gamma$ transitions in the daughter nuclei. Further, the level structures of 43,45 Cl are expanded by the addition of 20 and 8 new $\gamma$ transitions in 43 Cl and 45 Cl respectively, and core-excited negative-parity states were observed in both nuclei for the first time. For 45 S, a large fraction of the β -decay strength was observed feeding neutron-unbound states in 45 Cl, which, decaying by delayed neutrons, populated excited states in the β ⁢1⁢ n daughter, 44 Cl. Experimental observations were compared to detailed shell-model calculations using the SDPFSDG-MU interaction to highlight the role of the diminished N = 28 neutron shell gap and the near degeneracy of the proton s 1/2 and d 3/2 orbitals in the structure of the neutron-rich Cl isotopes. The current work also provides further support to a ground-state spin-parity assignment of 3/2 + in 45 Cl.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

A Theory of Ultrafast Charge Transfer Relaxation with Non-Innocent Solvent Molecules

In this work we revisit the photodynamics of tetracyanoethylene-hexamethylbenzene (TCNE- HMB), the molecular complex studied by Hochstrasser et al. [J. Chem. Phys. 100, 4797–4810, 1994] that has long challenged the applicability of Marcus’s theory of elec- tron transfer for predicting photochemical reactions. Using a novel black-box electronic structure algorithm (time-dependent density functional theory with one double, TD- DFT-1D) to efficiently run molecular dynamics that can treat charge recombination, we run ab initio surface hopping molecular dynamics and confirm that, for a polar solvent, charge recombination rates can be incredibly fast (indeed faster than the sol- vent relaxation time); for non-polar solvents, the rate is much slower. We demonstrate that, although Marcus theory cannot be directly applied, these nonequilibrium (and sometimes incredibly fast) photoexcited dynamics can be effectively explained within a two-state model without any evidence of a transition through a conical intersection. Most importantly, for this paradigmatic model system, we are able to identify two nuclear coordinates of interest (rather than the single coordinate predicted by Marcus or a full set of internal quantum modes studied by Bixon and Jortner): the solvent relaxation in the first shell (that strongly modulates the energies of the charge trans- fer state and differentiates time scales for relaxation) and a nuclear displacement in the TCNE-HMB complex arising from a handful of vibrations that induces non-Born Oppenheimer motion and eventually facilitates an abrupt electronic transition to the ground state. Altogether, these findings suggest a tractable generalization of Marcus theory for future simulations of photochemistry with non-innocent solvent environ- ments in the spirit of a Hamiltonian suggested by Stuchebrukhov (J. Chem. Phys. 107, 3821, 1997).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

Design of a pressurized lunar rover

A pressurized lunar rover is necessary for future long-term habitation of the moon. The rover must be able to safely perform many tasks, ranging from transportation and reconnaissance to exploration and rescue missions. Numerous designs were considered in an effort to maintain a low overall mass and good mobility characteristics. The configuration adopted consists of two cylindrical pressure hulls passively connected by a pressurized flexible passageway. The vehicle has an overall length of 11 meters and a total mass of seven metric tons. The rover is driven by eight independently powered two meter diameter wheels. The dual-cylinder concept allows a combination of articulated frame and double Ackermann steering for executing turns. In an emergency, the individual drive motors allow the option of skid steering as well. Two wheels are connected to either side of each cylinder through a pinned bar which allows constant ground contact. Together, these systems allow the rover to easily meet its mobility requirements. A dynamic isotope power system (DIPS), in conjunction with a closed Brayton cycle, supplied the rover with a continuous supply of 8.5 kW. The occupants are all protected from the DIPS system's radiation by a shield of tantalum. The large amount of heat produced by the DIPS and other rover systems is rejected by thermal radiators. The thermal radiators and solar collectors are located on the top of the rear cylinder. The solar collectors are used to recharge batteries for peak power periods. The rover's shell is made of graphite-epoxy coated with multi-layer insulation (MLI). The graphite-epoxy provides strength while the thermally resistant MLI gives protection from the lunar environment. An elastomer separates the two materials to compensate for the thermal mismatch. The communications system allows for communication with the lunar base with an option for direct communication with earth via a lunar satellite link. The various links are combined into one signal broadcast in the S-band at 2.3 GHz. The rover is fitted with a parabolic reflector disk for S-band transmission, and an omnidirectional antenna for local extravehicular activity (EVA) communication. The rover's guidance, navigation, and control subsystem consists of an inertial guidance system, an orbiting lunar satellite, and an obstacle avoidance system. In addition, the rover is equipped with a number of external fixtures including two telerobotic arms, lights, cameras, EVA storage, manlocks, a docking fixture, solar panels, thermal radiators, and a scientific airlock. In conclusion, this rover meets all of the design requirements and clearly surpasses them in the areas of mobility and maneuverability.

Bhardwaj, Manoj↗
DOE OSTI2023

Magnetic ordering in terbium at high pressures and low temperatures

We have investigated magnetic ordering in the heavy lanthanide terbium (Tb) for pressures up to 70 GPa and temperatures down to 20 K by synchrotron x-ray diffraction at the Advanced Photon Source, Argonne National Laboratory. The x-ray diffraction studies were complemented by neutron diffraction studies at the Spallation Neutron Source, Oak Ridge National Laboratory. We focused on the higher-pressure phases of Tb, such as the double hexagonal close-packed (dhcp, above 16 GPa), distorted face-centered cubic (hR24, above 30 GPa), and orthorhombic (oF16, above 51 GPa) phases. We observed the phenomenon of spontaneous magnetostriction in the dhcp and hR24 phases, where magnetic ordering at low temperatures gives rise to subtle splitting in x-ray diffraction peaks. The neutron diffraction study of the dhcp phase at 20 GPa revealed magnetic peaks that can be assigned a propagation vector k = ($\frac{1}{2}$, 0, $\frac{1}{2}$), and a magnetic ordering temperature that is consistent with the magnetostriction effect observed with x-ray diffraction. The high-pressure and low-temperature x-ray diffraction study at 70 GPa in the collapsed oF16 phase did not show any evidence of magnetostriction, indicating a significant decrease in the magnetic moment of the 4f-shell due to band broadening at ultra-high compression.

36 MATERIALS SCIENCE↗