Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Fast Room-Temperature Mg-Ion Conduction in Clay-Like Halide Glassy Electrolytes

The discovery of mechanically soft solid-state materials with fast Mg-ion conduction is crucial for the development of solid-state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm -1 at room temperature. These Mg-ion conductors obtained by ball milling Mg and Ga salts exhibit clay-like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft-clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine-rich environment, yielding fast Mg-ion conduction. This work demonstrates the potential of clay-like halide electrolytes for all-solid-state magnesium batteries, with possible further extension to other multivalent battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Upgrading the Performance and Stability of Lithium, Manganese-Rich Layered Oxide Cathodes with Combined-Formic Acid and Spinel Coating Treatment

We report improving sluggish rate performance and cycling stability of Li, Mn-rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li2CO3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ~32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode-electrolyte interfaces at high voltage. Post-annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg -1 can be attained after 150 cycles at 0.5C. Moreover, the post-cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrolyte Engineering Stabilizes Photoanodes Decorated with Molecular Catalysts

Molecular catalysts are promising oxygen evolution promoters in conjunction with photoanodes for solar water splitting. Maintaining the stability of both photoabsorber and cocatalyst is still a prime challenge, with many efforts tackling this issue through sophisticated material designs. Such approaches often mask the importance of the electrode-electrolyte interface and overlook easily tunable system parameters, such as the electrolyte environment, to improve efficiency. We provide a systematic study on the activity-stability relationship of a prominent Fe 2 O 3 photoanode modified with Ir molecular catalysts using in situ mass spectroscopy. After gaining detailed insights into the dissolution behavior of the Ir cocatalyst, a comprehensive pH study is conducted to probe the impact of the electrolyte on the performance. An inverse trend in Fe and Ir stability is found, with the best activity-stability synergy obtained at pH 9.7. The results bring awareness to the overall photostability and electrolyte engineering when advancing catalysts for solar water splitting.

14 SOLAR ENERGY↗
DOE OSTI2026

Analysis of the electrical double layer using electrochemical X-ray photoelectron spectroscopy

The element-sensitivity of X-ray spectroscopies offers the potential to disentangle the individual chemistries of water, ions, and adsorbates at the electrode-electrolyte interface in an element-by-element manner. However, targeted experimental design is needed to establish interface-sensitive in situ X-ray spectroscopy in a realistic electrochemical environment. Here, we demonstrate how electrochemical X-ray photoelectron spectroscopy (EC-XPS) in the dip-and-pull geometry can be used to specifically probe the behavior of ions in the electrical double layer. Taking the case study of a polycrystalline Au foil in 50 mM KClO 4 electrolyte, we tracked the electrochemical response of interfacial K + cations across a broad potential range. We show how, in combination with modeling, key parameters such as the potential of zero charge (PZC), ion packing behavior, dielectric saturation, and the electrostatic potential decay in the double layer can be extracted from the data. Importantly, we also analyze how the experimental conditions and non-idealities can influence the results and put forward criteria for reliable experimentation and data analysis.

Dip-and-pull↗
DOE OSTI2021

Understanding implications of cathode architecture on energy density of solid-state batteries

Next generation solid-state batteries (SSB) will need to leverage high voltage cathodes, as well as metallic anodes to achieve the realistic performance targets necessary to replace liquid electrolyte-based batteries in cutting-edge applications including electric vehicles. However, limitations arising from mass and charge transports, kinetics and chemo-mechanical degradation at the electrode | electrolyte interface limit the performance of present day SSBs. Optimizing composite cathode architecture, which is an integral part of solid-state batteries, is vital to realize the high-energy density and high-performance goals for next-generation solid-state batteries. Additionally, cathode architecture needs to be optimized for high loadings of active material, well-percolated ion and electron transport pathways and increased resilience against electrochemical stresses. This paper provides a first report of framework for geometric modeling of composite cathode architectures and evaluates the impact of cathode architecture on cell-level energy density using hierarchical models. Packing around primary and secondary active material particles are simulated for a range of active material particle size and solid electrolyte size distributions in the composite cathode. Impact of packing architecture on processing parameters of a given cathode composition and thickness, as well as on achievable energy density is evaluated for a range of commonly used solid electrolyte and cathode materials. Overall, the proposed framework offers a facile exploratory methodology for establishing initial metrics for scalable processing of practical and competent SSBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Thermal decomposition pathways of bulk electrolytes on vanadium oxide nanocrystals

The thermal stability of electrolytes at an elevated temperature induced by battery charge-discharge cycling is critical for the long cycling performance of a rechargeable battery. For many multivalent systems, such as rechargeable magnesium batteries, which offer great potential for high energy density and utilize earth-abundant resources, electrolyte instability and electrode surface passivation, arising from electrolyte decomposition, remain as major roadblocks. Understanding the electrolyte decomposition pathways at the electrode-electrolyte interface is essential to provide guidance in overcoming this challenge. In this work, in situ 13 C magic angle spinning nuclear magnetic resonance (MAS NMR) and first-principles calculations were used to investigate the thermal decomposition of the electrolyte in a system consisting of MgV 2 O 4 , a novel cathode for magnesium batteries, mixed with a bulk electrolyte consisting of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) in diglyme (G2). We show that significant electrolyte decomposition is observed in bulk 1.0 M Mg(TFSI) 2 in G2 mixed with nanometer sized MgV 2 O 4 powder at elevated temperatures. This observation is to mimic the possible thermal decomposition that might happen during battery cycling. We demonstrate that the MgV 2 O 4 surface is covered by a layer of decomposed G2 products. We conclude that the dominant reaction pathway for electrolyte decomposition is the thermal decomposition of the pure electrolytes at elevated temperatures, followed by adsorption of G2 decomposition products to the MgV 2 O 4 surface. The activation energy for the major decomposition pathway is obtained. In conclusion, this work highlights the importance of studying thermal decomposition of electrolytes for overall system stability and explores electrolyte stability at significantly elevated temperatures.

25 ENERGY STORAGE↗
DOE OSTI2024

Comprehensive evaluation of commercially scalable atomic-layer-deposited alumina coating impact on full cell battery performance across varied test conditions

Atomic Layer Deposition (ALD) has emerged as a strategic enhancement method for lithium-ion battery (LIB) materials offering potential benefits and durability benefits for industrial battery production. However, the translation from laboratory achievements to commercial-scale applications has been limited. Here, this study aims to bridge this gap by comprehensively evaluating the effects of commercially scalable Al 2 O 3 ALD coatings using full pouch cell performance as a means to assess the ALD impact. We utilized large-scale slot-die coating techniques to ensure consistent electrode quality and tested four configurations of pouch cells to analyze the individual effects of ALD coating on anode and cathode electroactive materials. Our extensive testing matrix included long-term cycling, fast discharge, fast charge, leakage current, and high voltage tests. While at lower C-rates (<~1C), the influence of Al 2 O 3 coatings on cell performance is not significant. Fast charging conditions reveal that the anode ALD coating significantly enhances performance via a passivating effect, while on the cathode, it is detrimental, potentially due to increased resistance of the thin interfacial layer formed during the ALD processing. Leakage current and high-voltage tests show that the application of ALD coatings on either anode or cathode effectively minimizes side reactions at the electrode-electrolyte interface. Additionally, ALD coatings significantly mitigate concentrated and localized lithium plating on the anodes. These insights provide a valuable understanding of the potential of ALD technologies in LIB manufacturing to tailor cell performance, paving the way for safer, more efficient, and cost-effective battery solutions.

25 ENERGY STORAGE↗
DOE OSTI2015

Synthesis and characterization of La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} oxide as cathode for Intermediate Temperature Solid Oxide Fuel Cells

Nanocrystalline La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} (LSFCu) material was synthetized by combustion method using EDTA as fuel/chelating agent and NH{sub 4}NO{sub 3} as combustion promoter. Structural characterization using thermodiffraction data allowed to determine a reversible phase transition at 425 °C from a low temperature R-3c phase to a high temperature Pm-3m phase and to calculate the thermal expansion coefficient (TEC) of both phases. Important characteristics for cathode application as electronic conductivity and chemical compatibility with Ce{sub 0.9}Gd{sub 0.1}O{sub 2−δ} (CGO) electrolyte were evaluated. LSFCu presented a p-type conductor behavior with maximum conductivity of 135 S cm{sup −1} at 275 °C and showed a good stability with CGO electrolyte at high temperatures. This work confirmed that as prepared LSFCu has excellent microstructural characteristics and an electrical conductivity between 100 and 60 S cm{sup −1} in the 500–700 °C range which is sufficiently high to work as intermediate temperature Solid Oxide Fuel Cells (IT-SOFCs) cathode. However a change in the thermal expansion coefficient consistent with a small oxygen loss process may affect the electrode-electrolyte interface during fabrication and operation of a SOFC. - Graphical abstract: Nanocrystalline La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} was prepared by gel combustion and characterized by X-ray thermodiffraction and its conductivity was determined. The phase shows a reversible rhombohedral to cubic structural phase transition at 425 °C and a semiconductor to metallic phase transition at 275 °C. - Highlights: • LSFCu was prepared by gel combustion route using EDTA and NH{sub 4}NO{sub 3}. • LSFCu shows a reversible phase transition at 425 °C from R-3c to Pm-3m phase. • The sample has a maximum conductivity value of 135 S cm{sup −1} at 275 °C. • LSFCu shows a good chemical compatibility with CGO at 900 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High safety and cycling stability of ultrahigh energy lithium ion batteries

High-nickel layered oxide Li-ion batteries (LIBs) dominate the electric vehicle market, but their potentially poor safety and thermal stability remain a public concern. Here, we show that an ultrahigh-energy LIB (292 Wh kg –1 ) becomes intrinsically safer when a small amount of triallyl phosphate (TAP) is added to standard electrolytes. TAP passivates the electrode-electrolyte interfaces and limits the maximum cell temperature during nail penetration to 55°C versus complete cell destruction (>950°C) without TAP. The downside of this reliable safety solution is higher interfacial impedance and hence lower battery power; however, thermal modulation for battery operation around 60°C can restore power completely. When cycled at 60°C, the cell stabilized with TAP achieved 2,413 cycles at 76% capacity retention. Such an unconventional combination of interface-passivating electrolyte additive with cell thermal modulation renders the most energy-dense LIBs even safer than LiFePO 4 chemistry, while enjoying high power and cycling stability concurrently.

25 ENERGY STORAGE↗
DOE OSTI2020

Ion Mobility Spectrometry with High Ion Utilization Efficiency Using Traveling Wave-Based Structures for Lossless Ion Manipulations

Ion packets introduced from gates, ion funnel traps, and other conventional ion injection mechanisms produce ion pulse widths typically around a few microseconds or less for ion mobility spectrometry (IMS)-based separations on the order of 100 milliseconds. When such ion injection techniques are coupled with ultralong path length traveling wave (TW)-based IMS separations (i.e., on the order of seconds) using structures for lossless ion manipulations (SLIMs), typically very low ion utilization efficiency is achieved for continuous ion sources [e.g., electrospray ionization (ESI)]. Even with the ability to trap and accumulate much larger populations of ions than being conventionally feasible over longer time periods in SLIM devices, the subsequent long separations lead to overall low ion utilization. In this study, we report the use of a highly flexible SLIM arrangement, enabling concurrent ion accumulation and separation and achieving near-complete ion utilization with ESI. We characterize the ion accumulation process in SLIM, demonstrate >98% ion utilization, and show both increased signal intensities and measurement throughput. This approach is envisioned to have broad utility to applications, for example, involving the fast detection of trace chemical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unveiling the Liquid Electrolyte Solvation Structure by Small Angle X-ray Scattering

The fundamental understanding of the liquid electrolyte (LE) solvation structure and electrode–electrolyte interface behavior will bring more in-depth thinking and revolutionary changes to the entire electrochemical energy storage field. Regardless of the variety of techniques available, the methods employed to investigate electrolyte solvation structures over a long-range are severely limited. Small-angle X-ray scattering (SAXS) is an ideal complement to Raman spectroscopy, Fourier transform infrared spectroscopy, or nuclear magnetic resonance, which offers a unique perspective from a larger scale on clusters or networks in electrolytes. Understanding the solvation structures from a few angstroms to hundreds of nanometers will undoubtedly lay a good foundation for studying the macroscopic transport properties, such as viscosity and ionic conductivity, of the LEs. Here, in this Perspective, we discuss the use of SAXS to investigate the solvation structures in different electrolyte systems, a prospect for the SAXS broader application in the electrolyte study, and some challenges that need to be solved in the SAXS application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Promising Proton Conductor for Intermediate-Temperature Fuel Cells: Li 13.9 Sr 0.1 Zn(GeO 4 ) 4

Commercialization of fuel cell technologies hinges on the development of solid electrolytes of sufficient ionic conductivity at intermediate temperatures (200–600 °C). Here we report a novel proton conductor derived from Li 13.9 Sr 0.1 Zn(GeO 4 ) 4 (LSZG), demonstrating the highest protonic conductivity (0.034 S cm –1 at 600 °C) among all known proton conducting ceramics, which is much higher than those of several well-known oxygen ion conducting electrolytes (e.g., ~0.009 and 0.018 S cm –1 , respectively, for zirconia- and ceria-based oxide electrolyte at 600 °C). Interestingly, after fully replacing the mobile Li + ions by H + through proper ion exchange, the H+ conductivity increases from 0.034 to 0.048 S cm –1 at 600 °C. A simple but effective ab initio molecular dynamics simulation study suggests a unique H + /Li + transport mechanism: the proton in LSZG moves freely in the Li+ interstitial space within the 3D Li+ transport network (i.e., 4c and 4a sites, as the occupancies of the Li1 and Li 2 sites are 55% and 16%, respectively). In particular, a solid oxide fuel cell (SOFC) based on an LSZG electrolyte (~40 μm thick) demonstrates high open circuit voltage (~1.1 V) and good peak power density (377 mW cm –2 ) at 600 °C. The cell performance may be further improved if the electrode–electrolyte interface can be optimized. The new transport mechanism and excellent proton conductivity suggest that the LSZG represents an important family of electrolyte materials, which may be used as a proton-conducting membrane for intermediate-temperature SOFCs and hydrogen production or separation.

25 ENERGY STORAGE↗
DOE OSTI2017

Solvation and Dynamics of Sodium and Potassium in Ethylene Carbonate from ab Initio Molecular Dynamics Simulations

The development of sodium and potassium batteries offers a promising way to meet the scaling and cost challenges of energy storage. However, compared to Li + , several intrinsic properties of Na + and K + , including their solvation and dynamics in typical organic electrolytes utilized in battery applications, are less well-understood. Here in this paper, we report a systematic investigation of Na + and K + in ethylene carbonate (EC) using first-principles molecular dynamics simulations. Our simulations reveal significant differences in the solvation structure and dynamical properties of Na + and K + compared to Li + . We find that, in contrast to Li + which exhibits a well-defined first solvation shell, the larger Na+ and K+ ions show more disordered and flexible solvation structures. These differences in solvation were found to significantly influence the ion dynamics, leading to larger diffusion coefficients of Na + and K + compared to Li + . Our simulations also reveal a clear and interesting analog in the behavior of the ions in EC and aqueous environments, particularly in the specific ion effects on the solvent dynamics. Lastly, this work provides fundamental understanding of the intrinsic properties of Na + and K + in organic electrolytes, which may ultimately influence the intercalation mechanism at the electrode–electrolyte interface and therefore battery performance, lifetime, and safety.

25 ENERGY STORAGE↗
DOE OSTI2018

Correlation between Structure, Chemistry, and Dielectric Properties of Iron-Doped Gallium Oxide (Ga 2– x Fe x O 3 )

Iron (Fe) doped gallium oxide (Ga2O3) compounds (Ga2-xFexO3; x=0.0-0.3; referred to GFO) were synthesized by the standard high-temperature solid-state chemical reaction method. X-ray diffraction (XRD) analyses confirmed that the sintered GFO compounds stabilized in monoclinic crystal structure with C2/m space group. Local structure and chemical bonding analyses using X-ray absorption near edge structure (XANES) revealed that the Fe occupies octahedral and tetrahedral sites similar to Ga in parent Ga2O3 lattice without considerable changes in the local symmetry. Morphology of the GFO compounds is characterized by the presence of rod-shaped particle (from around 2.0-3.5 µm) features. The energy dispersive X-ray spectroscopy (EDS) confirmed the chemical stoichiometry of the GFO compounds, where the atomic ratio of the constituted elements is in accordance with the calculated concentration values. The frequency and temperature dependent dielectric properties of the GFO compounds exhibited the traditional dielectric dispersion behavior. Relatively high dielectric constant at lower frequencies is attributed to Maxwell-Wagner type of dielectric relaxation which primarily originated from uncompensated charges at electrode material interface. Based on the results and analyses, the effect of Fe content on the crystal structure, chemical bonding and local structure, and dielectric properties of Ga2-xFexO3 compounds is established.Based on the results and analyses, the effects of Fe content on the crystal structure, chemical bonding and local structure, and dielectric properties of Ga2-xFexO3 compounds are established.

Roy, Swadipta↗
DOE OSTI2020

Probing Conformational Evolution and Associated Dynamics of Mg(N(SO 2 CF 3 ) 2 ) 2 ·Dimethoxyethane Adduct Using Solid-State 19 F and 1 H NMR

Bis(trifluoromethanesulfonimide) or TFSI is widely used as a counter anion in electrolyte design due to its structural flexibility and chemical stability. Here we studied the conformational variations and associated dynamics of TFSI in adduct of Mg(TFSI) 2 with dimethoxyethane (DME), a solvate crystalline material using solid-state 1 H and 19 F NMR. TFSI molecular motion in this solvate structure falls within the timescale of the 19 F NMR experiment, yielding spectroscopic signatures for unique TFSI conformers under the coordination environment of Mg 2+ cation. Within the temperature range of -5 to 82 °C, we observe nine distinct TFSI sites in both crystalline and disordered regions using 19 F NMR, reflecting complexity of structural and dynamics of TFS1 anions within solvate structure. The four distinguishable sites in the disordered region for the two CF 3 groups of the same TFSI molecule are identified using chemical shift analysis. The exchange rate constants from site to site are calculated through variable temperature 19 F NMR and two-dimensional (2D) exchange spectroscopy (EXSY) experiments, along with respective activation enthalpies using Eyring's formulation. The flip rate of CF 3 around the S-C bond is estimated as ~ 15 s -1 at 8 °C with ΔH ≠ ~ 22 kJ/mol, but the rotation of the entire TFSI is 4.8 s -1 at 8 °C with a significantly greater ΔH ≠ = 98 ± 10 kJ/mol. Furthermore, the slow conversion of trans to cis conformers at a lower temperature (T ≤ 1 °C) in the crystalline region is monitored, with a conversion rate of ~ 2 x 10 -5 s -1 at -5 °C. Density functional theory (DFT)-based calculations were performed to support further the assignment of experimental chemical shifts, and the activation energy E a = 21.1 kJ/mol obtained for the cis to trans transition is consistent with experimental values. The combined set of 19 F and 1 H under both one-dimensional (1D) and 2D NMR methods demonstrated here can be further used for examining electrode-electrolyte interfaces to probe the motions of various constituents that can enable detailed studies of interfacial processes and dynamics. Ultimately, such studies will aid in the design and discovery of interfacial constructs in which directed defect chemistry, chemical moiety distribution, and nanostructure are employed to drive efficient charge transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Degradation Mechanisms of Magnesium Metal Anodes in Electrolytes Based on (CF 3 SO 2 ) 2 N – at High Current Densities

The energy density of rechargeable batteries utilizing metals as anodes surpasses that of Li ion batteries, which employ carbon instead. Among possible metals, magnesium represents a potential alternative to the conventional choice, lithium, in terms of storage density, safety,stability, and cost. However, a major obstacle for metal-based batteries is the identification of electrolytes that show reversible deposition/dissolution of the metal anode and support reversible intercalation of ions into a cathode. Traditional Grignard-based Mg electrolytes are excellent with respect to the reversible deposition of Mg, but their limited anodic stability and compatibility with oxide cathodes hinder their applicability in Mg batteries with higher voltage. Non-Grignard electrolytes, which consist of ethereal solutions of magnesium(II) bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ), remain fairly stable near the potential of Mg deposition. The slight reactivity of these electrolytes toward Mg metal can be remedied by the addition of surface-protecting agents, such as MgCl 2 . Hence, ethereal solutions of Mg(TFSI) 2 salt with MgCl 2 as an additive have been suggested as a representative non-Grignard Mg electrolyte. In this work, the degradation mechanisms of a Mg metal anode in the TFSI-based electrolyte were studied using a current density of 1 mA cm -2 and an areal capacity of ~0.4 mAh cm -2 , which is close to those used in practical applications. The degradation mechanisms identified include the corrosion of Mg metal, which causes the loss of electronic pathways and mechanical integrity, the nonuniform deposition of Mg, and the decomposition of TFSI - anions. This study not only represents an assessment of the behavior of Mg metal anodes at practical current density and areal capacity but also details the outcomes of interfacial passivation, which was detected by simple cyclic voltammetry experiments. This study also points out the absolute absence of any passivation at the electrode-electrolyte interface for the premise of developing electrolytes compatible with a metal anode.

25 ENERGY STORAGE↗
DOE OSTI2023

Molten Sodium Penetration in NaSICON Electrolytes at 0.1 A cm –2

High-conductivity solid electrolytes, such as the Na superionic conductor, NaSICON, are poised to play an increasingly important role in safe, reliable battery-based energy storage, enabling advanced sodium-based batteries. Coupled demands of increased current density (≥0.1 A cm –2 ) and low-temperature (<200 °C) operation, combined with increased discharge times for long-duration storage (>12 h), challenge the limitations of solid electrolytes. Here, we explore the penetration of molten sodium into NaSICON at high current densities. Previous studies of β"-alumina proposed that Poiseuille pressure-driven cracking (mode I) and recombination of ions and electrons within the solid electrolyte (mode II) are the two main mechanisms for Na penetration, but a comprehensive study of Na penetration in NaSICON is necessary, particularly at high current density. To further understand these modes, this work employs unidirectional galvanostatic testing of Na|NaSICON|Na symmetric cells at 0.1 A cm –2 over 23 h at 110 °C. Further, while galvanostatic testing shows a relatively constant yet increasingly noisy voltage profile, electrochemical impedance spectroscopy (EIS) reveals a significant decrease in cell impedance correlated with significant sodium penetration, as observed in scanning electron microscopy (SEM). Further SEM analysis of sodium accumulation within NaSICON suggests that mode II failure may be far more prevalent than previously considered. Further, these findings suggest that total (dis)charge density (mAh cm –2 ), as opposed to current density (mA cm –2 ), may be a more critical parameter when examining solid electrolyte failure, highlighting the challenge of achieving long discharge times in batteries using solid electrolytes. Together, these results provide a better understanding of the limitations of NaSICON solid electrolytes under high current and emphasize the need for improved electrode–electrolyte interfaces.

25 ENERGY STORAGE↗
DOE OSTI2020

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.

25 ENERGY STORAGE↗