Search NASA⌕ Search

SEARCH · Search NASA

Results for “equilibrium constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Reduced Equations for Calculating the Combustion Rates of Jet-A and Methane Fuel

Simplified kinetic schemes for Jet-A and methane fuels were developed to be used in numerical combustion codes, such as the National Combustor Code (NCC) that is being developed at Glenn. These kinetic schemes presented here result in a correlation that gives the chemical kinetic time as a function of initial overall cell fuel/air ratio, pressure, and temperature. The correlations would then be used with the turbulent mixing times to determine the limiting properties and progress of the reaction. A similar correlation was also developed using data from NASA's Chemical Equilibrium Applications (CEA) code to determine the equilibrium concentration of carbon monoxide as a function of fuel air ratio, pressure, and temperature. The NASA Glenn GLSENS kinetics code calculates the reaction rates and rate constants for each species in a kinetic scheme for finite kinetic rates. These reaction rates and the values obtained from the equilibrium correlations were then used to calculate the necessary chemical kinetic times. Chemical kinetic time equations for fuel, carbon monoxide, and NOx were obtained for both Jet-A fuel and methane.

Molnar, Melissa↗
DOE OSTI2026

Assessing the Impacts of Conformational Fluxionality on Copper(II/I) Electron Transfer Self-Exchange

Typical Cu(II/I) complexes exhibit hallmark structural changes during their electron transfer (ET) reactions that result from the (pseudo) Jahn-Teller distortions and changes in polarizability inherent to their d 10 / d 9 configurations. Given that such structural changes incur large reorganization energy penalties, slow the rates of ET are characteristic of these compounds. Notwithstanding, we recently reported a set of Cu(II/I) complexes that undergo significant and well-defined structural changes during their redox reactions yet exhibit rapid (> 10 5 M ‒1 s ‒1 ) ET self-exchange rate constants ( k 11 ). To explain these results we proposed a pre-equilibrium model in which inherent conformational fluxionality in one of the two oxidation states provides access to pathways involving lower reorganization energies during the ET event. Herein we report our results testing this hypothesis through the preparation and study of a homologous series of compounds exhibiting varying extents of con-formational fluxionality in the Cu(I) state. We characterize these compounds electrochemically, structurally, and by varia-ble temperature NMR spectroscopy to provide experimental evidence for increase fluxionality across the series. We then correlate the trend with increasing k 11 through NMR linewidth broadening experiments, further taking care to define the impacts of solvent impurities therein. Finally, the nature of the conformational rearrangements, and their relation to increased k 11 are explored computationally to reveal differential Boltzmann populations of conformers across the series. The cumulative results of these studies support a previously underappreciated strategy for overcoming barriers to slow ET kinetics: via the incorporation of conformational fluxionality.

Singh, Aditi↗
DOE OSTI2023

Dynamics of skyrmion contraction and expansion in a magnetic film

Contraction and expansion of skyrmions in ferromagnetic films are investigated. In centrosymmetric systems, the dynamics of a collapsing skyrmion is driven by dissipation. The collapse time has a minimum on the damping constant. In systems with broken inversion symmetry, the evolution of skyrmions toward equilibrium size is driven by the Dzyaloshinskii–Moriya interaction. As a result, expressions describing the time dependence of the skyrmion size are derived and their implications for skyrmion-based information processing are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Influence of fourth-order vibrational corrections on semi-experimental (reSE) structures of linear molecules

Semi-experimental structures (reSE) are derived from experimental ground state rotational constants combined with theoretical vibrational corrections. They permit a meaningful comparison with equilibrium structures based on high-level ab initio calculations. Typically, the vibrational corrections are evaluated with second-order vibrational perturbation theory (VPT2). The amount of error introduced by this approximation is generally thought to be small; however, it has not been thoroughly quantified. Herein, we assess the accuracy of theoretical vibrational corrections by extending the treatment to fourth order (VPT4) for a series of small linear molecules. Typical corrections to bond distances are on the order of 10−5 Å. Larger corrections, nearly 0.0002 Å, are obtained to the bond lengths of NCCN and CNCN. A borderline case is CCCO, which will likely require variational computations for a satisfactory answer. Treatment of vibrational effects beyond VPT2 will thus be important when one wishes to know bond distances confidently to four decimal places (10−4 Å). Certain molecules with shallow bending potentials, e.g., HOC+, are not amenable to a VPT2 description and are not improved by VPT4.

Chemistry↗
DOE OSTI2021

Accelerating boundary analog of a Kerr black hole

An accelerated boundary correspondence (i.e. a flat spacetime accelerating mirror trajectory) is derived for the Kerr spacetime, with a general formula that ranges from the Schwarzschild limit (zero angular momentum) to the extreme maximal spin case (yielding asymptotic uniform acceleration). Here, the beta Bogoliubov coefficients reveal the particle spectrum is a Planck distribution at late times with temperature cooler than a Schwarzschild black hole, due to the 'spring constant' analog of angular momentum. The quantum stress tensor indicates a constant emission of energy flux at late times consistent with eternal thermal equilibrium.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

Tropical sea surface temperature - An interactive one-dimensional atmosphere-ocean model

It is shown that the (cumulus) convective processes in the tropics may be described by a one-dimensional cloud model, while the near-surface ocean may similarly be described by a one-dimensional mixed-layer model. The coupling is achieved through a sea surface flux budget combined with the flux parameterizations implied by Monin-Obukhov similarity theory. The coupled one-dimensional atmosphere-ocean model is applied to the equilibrium situation in which all temperatures reach a steady state. For the ocean, the fluxes must vanish in equilibrium, but the atmosphere maintains a stable lapse rate by balancing cumulonimbus heating against net radiative cooling. All water precipitating from cumulonimbus clouds must have evaporated from the sea. It is shown that this equilibrium system is closed and determinable solely in terms of the solar constant.

Sarachik, E. S.↗
NASA NTRS1980

The thermal statics of coronal loops

The thermal statics of constant pressure coronal loops is discussed, with particular emphasis on non-equilibrium and scaling relations. An analytical solution showing explicitly the occurrence of non-equilibrium in radiation dominated loops is presented. In addition, the general scaling law for hot loops is given. However, in view of the uncertainties in the coronal heating function and the observational determined loop parameters, it is suggested that scaling laws are currently of limited value.

Roberts, B.↗
NASA NTRS1984

A review of turbulent-boundary-layer heat transfer research at Stanford, 1958-1983

For the past 25 years, there has existed in the Thermosciences Laboratory of the Mechanical Engineering Department of Stanford University a research program, primarily experimental, concerned with heat transfer through turbulent boundary layers. In the early phases of the program, the topics considered were the simple zero-pressure-gradient turbulent boundary layer with constant and with varying surface temperature, and the accelerated boundary layer. Later equilibrium boundary layers were considered along with factors affecting the boundary layer, taking into account transpired flows, flows with axial pressure gradients, transpiration, acceleration, deceleration, roughness, full-coverage film cooling, surface curvature, free convection, and mixed convection. A description is provided of the apparatus and techniques used, giving attention to the smooth plate rig, the rough plate rig, the full-coverage film cooling rig, the curvature rig, the concave wall rig, the mixed convection tunnel, and aspects of data reduction and uncertainty analysis.

Moffat, R. J.↗
NASA NTRS1990

Upstream-influence scaling of fin-generated shock wave boundary-layer interactions

An upstream-influence scaling law, previously formulated through analysis of Mach 3 data, has been extended to Mach numbers from 2.5 through 4. For adiabatic, equilibrium, turbulent boundary layers, there is no Mach number effect on the constants in the Reynolds number parameters of this law. In addition, based on local similarity, a new Mach number parameter, namely, the Mach number component of the incoming stream normal to the farfield upstream influence, is proposed. Scaling by either the incoming Mach number normal to the inviscid shock or by the incoming Mach number normal to the farfield upstream influence is equivalent to scaling by the hypersonic similarity parameter.

Lu, Frank K.↗
NASA NTRS1993

The rollup of a vortex layer near a wall

The behavior of an inviscid vortex layer of non-zero thickness near a wall is studied, both through direct numerical simulation of the two-dimensional vorticity equation at high Reynolds numbers, and using an approximate ordinary nonlinear integro-differential equation which is satisfied in the limit of a thin layer under long-wavelength perturbations. For appropriate initial conditions the layer rolls up and breaks into compact vortices which move along the wall at constant speed. Because of the effect of the wall, they correspond to equilibrium counter-rotating vortex dipoles. This breakup can be related to the disintegration of the initial conditions of the approximate nonlinear dispersive equation into solitary waves. The study is motivated by the formation of longitudinal vortices from vortex sheets in the wall region of a turbulent channel.

Jimenez, Javier↗
DOE OSTI2020

Reduced type-A carbohydrate-binding module interactions to cellulose I leads to improved endocellulase activity

Dissociation of nonproductively bound cellulolytic enzymes from cellulose is hypothesized to be a key rate-limiting factor impeding cost-effective biomass conversion to fermentable sugars. However, the role of carbohydrate-binding modules (CBMs) in enabling nonproductive enzyme binding is not well understood. Here, we examine the subtle interplay of CBM binding and cellulose hydrolysis activity for three models type-A CBMs (Families 1, 3a, and 64) tethered to multifunctional endoglucanase (CelE) on two distinct cellulose allomorphs (i.e., cellulose I and III). We generated a small library of mutant CBMs with varying cellulose affinity, as determined by equilibrium binding assays, followed by monitoring cellulose hydrolysis activity of CelE–CBM fusion constructs. Finally, kinetic binding assays using quartz crystal microbalance with dissipation were employed to measure CBM adsorption and desorption rate constants kon and koff, respectively, towards nanocrystalline cellulose derived from both allomorphs. Overall, our results indicate that reduced CBM equilibrium binding affinity towards cellulose I alone, resulting from increased desorption rates (koff) and reduced effective adsorption rates (nkon), is correlated to overall improved endocellulase activity. Future studies could employ similar approaches to unravel the role of CBMs in nonproductive enzyme binding and develop improved cellulolytic enzymes for industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1991

Renormalization group analysis of anisotropic diffusion in turbulent shear flows

The renormalization group is applied to compute anisotropic corrections to the scalar eddy diffusivity representation of turbulent diffusion of a passive scalar. The corrections are linear in the mean velocity gradients. All model constants are computed theoretically. A form of the theory valid at arbitrary Reynolds number is derived. The theory applies only when convection of the velocity-scalar correlation can be neglected. A ratio of diffusivity components, found experimentally to have a nearly constant value in a variety of shear flows, is computed theoretically for flows in a certain state of equilibrium. The theoretical value is well within the fairly narrow range of experimentally observed values. Theoretical predictions of this diffusivity ratio are also compared with data from experiments and direct numerical simulations of homogeneous shear flows with constant velocity and scalar gradients.

Rubinstein, Robert↗
DOE OSTI2022

Precise equilibrium structures of 1 H - and 2 H -1,2,3-triazoles (C 2 H 3 N 3 ) by millimeter-wave spectroscopy

The 1H- and 2H-1,2,3-triazoles are isomeric five-membered ring, aromatic heterocycles that may undergo chemical equilibration by virtue of intramolecular hydrogen migration (tautomerization). Using millimeter-wave spectroscopy in the 130–375 GHz frequency range, we measured the spectroscopic constants for thirteen 1H-1,2,3-triazole and sixteen 2H-1,2,3-triazole isotopologues. Herein, we provide highly accurate and highly precise semi-experimental equilibrium (r e SE ) structures for the two tautomers based on the spectroscopic constants of each set of isotopologues, together with vibration–rotation interaction and electron-mass distribution corrections calculated using coupled-cluster singles, doubles, and perturbative triples calculations [CCSD(T)/cc-pCVTZ]. The resultant structures are compared with a “best theoretical estimate” (BTE), which has recently been shown to be in exceptional agreement with the semi-experimental equilibrium structures of other aromatic molecules. Bond distances of the 1H tautomer are determined to <0.0008 Å and bond angles to <0.2°. For the 2H tautomer, bond angles are also determined to <0.2°, but bond distances are less precise (2σ ≤ 0.0015). Finally, agreement between BTE and r e SE values is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Table and Charts of Equilibrium Normal-shock Properties for Pure Hydrogen with Velocities to 70 km/sec. Revised.

Errors found in the original edition are corrected. Refinement was made in procedures for solving the conservation relations for an incident (moving), standing, and reflected normal shock, as well as in computational methods for determining thermochemical-equilibrium hydrogen properties. A six-species hydrogen model replaces the original four-species model, and the heat of formation and spectroscopic constants used in this six-species model are listed in appendix A. In appendix B, comparisons are made between a number of methods for determining equilibrium thermodynamic properties for hydrogen for several values of pressure and temperatures to 50000 K. A comparison is also performed between the present method and a second method for determining thermodynamic properties and flow velocity behind an incident shock into pure hydrogen and behind a reflected shock.

Miller, C. G., III↗
DOE OSTI2026

Estimating coil features from an equilibrium

We present an explicit theoretical framework for constructing artificial modular coils for vacuum stellarator fields based solely on equilibrium properties, achieved through the formulation of a current potential defined on flux surfaces. Contours of constant Boozer toroidal angle can be directly interpreted as proxy coils, and so we demonstrate that key measures of coil complexity—particularly coil non-planarity—are strongly governed by local magnetic-field properties. This approach shows promise as predictor for more realistic coil configurations, providing both a pathway toward deeper understanding of equilibrium–coil relationships and a potential practical proxy for coil design.

Rodríguez, Eduardo [Max Planck Institute for Plasm↗
DOE OSTI2026

Parametrically amplified Josephson plasma waves in YBa 2 Cu 3 O 6+ x : Evidence for local superconducting fluctuations up to the pseudogap temperature T ∗

Experiments that subject underdoped YBa 2 Cu 3 O 6+x (YBCO) to intense terahertz pulses at temperatures between the transition temperature T c and the pseudogap scale T ∗ have revealed a reflectivity edge that resembles that of the superconducting state, together with second harmonic generation of a probe pulse modulated at a similar frequency. These have been interpreted in terms of parametric amplification of the lower Josephson plasmon mode. Since this mode is often associated with coherent oscillations between bilayers in the YBCO structure, these experiments have led to the suggestion that the intense pump has created (or revealed) in-plane pair coherence up to T ∗ ≈ 400 K. In this paper we propose an alternative explanation by assuming the existence of local pair amplitude and phase at equilibrium for T c < T < T ∗ . The phase correlation spans only a few lattice constants and we do not assume any pump-induced enhancement of this correlation, either in-plane or between bilayers. Instead, the coherent drive, via a parametric amplification process, induces coherence in the Josephson currents between members of bilayers. When combined with a Floquet framework, the reflectivity data can be explained. The key point is that in the lower Josephson plasmon, the coupling between bilayers is mainly capacitive; the Josephson current between bilayers can be set to zero without strongly affecting the parametric amplification process. Importantly, while superconducting coherence may not be created by the pump, the pseudogap phase must possess a local pairing amplitude at equilibrium. Consequently, these experiments have strong implications for the understanding of the pseudogap phase.

parametric amplification↗
DOE OSTI2021

Henry’s law constants (IUPAC Recommendations 2021)

Henry’s law states that the abundance of a volatile solute dissolved in a liquid is proportional to its abundance in the gas phase. It applies at equilibrium and in the limit of infinite dilution of the solute. For historical reasons, numerous different definitions, names, and symbols are used in the literature to express the proportionality coefficient, denoted the “Henry’s law constant”. Furthermore, a consistent set of recommendations is presented. An important distinction is made between two new recommended reciprocal quantities: “Henry’s law solubility constant” (H s ) and “Henry’s law volatility constant” (H v ). Eight recommended variants of H s and H v are described and relations among them presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reference surface excess isotherms for carbon dioxide adsorption on ammonium ZSM-5 at various temperatures

Abstract This work is part of the effort at the Facility for Adsorbent Characterization and Testing (FACT lab) at the National Institute of Standards and Technology (NIST) to develop reference materials, reference data, and measurement best practices for adsorption metrology. High-pressure surface excess isotherms for CO 2 adsorption on NIST Reference Material 8852 (ammonium ZSM-5) at 15 °C, 25 °C, and 35 °C are reported, expanding on a FACT Lab-organized international interlaboratory study on this sorbent/sorbate pair at 20 °C. The range of temperatures of the present study is of interest for many CO 2 adsorption measurements and applications. Measurements were made using five different adsorption instruments, both manometric and gravimetric. Excellent agreement in the measured isotherms among the instruments was found. An empirical reference equation of the form, $${n}_{ex,ref}({P}_{eq})=\frac{c}{\{{1+\mathrm{exp}[\left(-\mathrm{ln}\left(P\right)+a\right)/b ]\}}^{b }} ,$$ n e x , r e f ( P eq ) = c { 1 + exp [ - ln P + a / b ] } b , [ n ex,ref is surface excess uptake (mmol/g); P eq is equilibrium pressure (MPa); P is ( P eq )/(1 MPa)]; a , b , c are constants] and the 95% uncertainty interval were determined for the isotherms at each of the temperatures. Lastly, the isosteric heat of adsorption is estimated from absolute isotherms derived from the surface excess reference data.

Nguyen, Huong Giang T. (ORCID:0000000210527565)↗