SEARCH · Search NASA

Results for “exosphere”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Some possible effects of Jupiter's rings on the Jovian inner plasmasphere

The ionospheric plasma density on magnetic field lines threading the Jovian rings which are located inside approximately 1.8 Jupiter radii on the jovigraphic equatorial plane is calculated by using a rotating ion exosphere model. It is found that the bulk of the ionospheric particles on these field lines are on ballistic trajectories. On field lines approximately symmetric with respect to the jovigraphic equator, the ring, which to a first approximation would absorb the population of trapped particles, consequently has little effect. On field lines which are made asymmetric by the higher-order multipoles of Jupiter's field and the tilt of the dipole axis, the rings may have a significant effect. It is suggested that better definition of the rings' atmospheric and ionospheric properties is required to model these localized effects. If the rings are found to be an important plasma source for the inner magnetosphere, the present exospheric model will have to be revised.

Luhmann, J. G.↗

NASA NTRS1981

Hot oxygen atoms in the upper atmosphere of Venus

Using data obtained by an ultraviolet spectrometer on the Pioneer-Venus Orbiter, energy and altitude distribution of nonthermal oxygen atoms in the Venus atmosphere for typical daytime and nighttime conditions are calculated using two different numerical methods. Agreement is found between results obtained by the two-stream transport method and the diffusion equation technique. Dissociative recombination of molecular oxygen ions and charge exchange of atomic oxygen ions with the neutral hydrogen and oxygen gas are the source terms, and calculations show that the dissociative recombination term is the dominant one. It is shown that measured hot atom concentrations exceed estimates of the thermal hydrogen atom concentrations derived from Brinton et al. (1980) over most of the daytime exosphere, and the calculated concentrations do so to an even greater extent. It is concluded that hot oxygen atoms are an important component of the dayside exosphere of Venus, their most important effect being the absorption of solar wind.

Nagy, A. F.↗

NASA NTRS1982

Jacchia-Lineberry upper atmosphere density model

A series of increasingly accurate models which are a careful blend of empirical and theoretical formulae were developed. The exospheric temperature is assumed to be a function of: (1) the average and daily variations in the solar flux, (2) the average and three hourly variations in the geomagnetic index, (3) the angle between the position vector and the axis of the unsymmetric atmospheric bulge, and (4) the angle between the position vector and the geomagnetic pole. The exospheric temperature is related to the density by the solution of the diffusion equilibrium equations for the different constituents of the atmosphere as a function of altitude. Other variations are modeled directly as changes in the density. They are: (1) changes due to the semiannual effect, and (2) changes due to the seasonal latitudinal effect. The causes for these variations are not exactly known but may be modeled sufficiently by empirical formulae. The Jacchia model is assumed to be valid over the altitude range of 90 to 2500 km. The residuals between the observed density from satellite drag observations and the computed densities show the mean relative error to be generally less than 10 percent with occasional peak errors near 50 percent.

Mueller, A. C.↗

NASA NTRS1986

The ionosphere of Uranus - A myriad of possibilities

A one-dimensional model has been used to study the effects of exospheric temperature, methane and water influx, ionospheric outflow, and electron precipitation on the composition and structure of the ionosphere of Uranus. Peak ion concentrations range from 1000 to 1 million per cu cm with a wide variation in peak altitude, which depends strongly on the exospheric temperature. In all the cases considered, H(+) is the major ion in the topside ionosphere. At altitudes near or below the peak, H3(+) and CH5(+) can dominate, depending on the magnitude of CH4 and H2O influx. Atomic hydrogen column depths above the methane absorbing layer exceed 10 to the 17th per sq cm and can produce large (400 R) emissions of resonantly scattered Lyman-alpha. In the sunlit polar cap, electron precipitation with energy fluxes of 0.6 to 1.0 erg/sq cm s results in direct production of Lyman-alpha emissions that exceed 1 kR.

Chandler, M. O.↗

NASA NTRS1988

High altitude atmospheric modeling

Five empirical models were compared with 13 data sets, including both atmospheric drag-based data and mass spectrometer data. The most recently published model, MSIS-86, was found to be the best model overall with an accuracy around 15 percent. The excellent overall agreement of the mass spectrometer-based MSIS models with the drag data, including both the older data from orbital decay and the newer accelerometer data, suggests that the absolute calibration of the (ensemble of) mass spectrometers and the assumed drag coefficient in the atomic oxygen regime are consistent to 5 percent. This study illustrates a number of reasons for the current accuracy limit such as calibration accuracy and unmodeled trends. Nevertheless, the largest variations in total density in the thermosphere are accounted for, to a very high degree, by existing models. The greatest potential for improvements is in areas where we still have insufficient data (like the lower thermosphere or exosphere), where there are disagreements in technique (such as the exosphere) which can be resolved, or wherever generally more accurate measurements become available.

Hedin, Alan E.↗

NASA NTRS1990

An assessment of the conditions for critical velocity ionization at the weakly magnetized planets

It has been proposed that critical velocity ionization (CVI) may occur in the magnetosheaths of weakly magnetized planets where the solar wind flows through the planets' upper atmospheres. One can examine this possibility for Venus and Mars by using magnetosheath flow and exosphere models to determine whether the criteria for CVI are met. These criteria include Brenning's empirical condition on the cross-field flow velocity (it must not exceed the local magnetosonic velocity) and the 'Townsend condition' requiring that the integrated probability of impact ionization by a hot electron be greater than 1 along a streamline past the planet. Application of the Spreiter-Stahara gas dynamic flow model and the Nagy and coworkers' models for the exospheres lead to the conclusion that the conditions can be met in a limited region near Venus. However, evidence for CVI has not been identified in in-situ data. Since key details of the planet-solar wind interaction can be explained in terms of photoionization alone, other signatures of the process must be sought in the observations if the presence of CVI is to be positively inferred.

Luhmann, J. G.↗

NASA NTRS1990

A model of the energetic ion environment of Mars

Because Mars has a weak intrinsic magnetic field and a substantial atmosphere, instruments on orbiting spacecraft should detect a population of energetic heavy planetary ions which result from comet-like ion pickup in the solar wind and magnetosheath convection electric fields, in addition to those that might result from processes internal to a Martian 'magnetosphere.' Although this ion exosphere has been previously discussed in the literature, detailed predictions that might be directly applied to the interpretation of data are not available. Here a test particle model is used to construct a global picture of Martian pickup ions in the Mars environment. The model makes use of the recent Nagy and Cravens (1988) model of the Martian exosphere and Spreiter and Stahara's (1980) gas dynamic model of the magnetosheath. The pickup of ions originating at Phobos is also considered. Notable properties of the resulting ion distributions include their near-monoenergetic spectra, pancake pitch angle distributions, and large gyroradii compared to the planetary scale.

Luhmann, J. G.↗

NASA NTRS1990

Spatial distribution of sodium vapor in the atmosphere of Mercury

The present study indicates that the Na content of the Mercury exosphere is influenced by both diurnally and sporadically varying forces; radiation pressure is identified with the former, and solar wind-magnetosphere interactions with the latter. The latitudinal distribution is highly variable on a timescale of less than one day, and significant enhancements are found in Na abundance at one pole. It is suggested that a significant amount of Na recycling through an exosphere-magnetosphere coupling may be responsible for this effect. The magnetosphere provides a mechanism for transport of Na toward the poles, and for subsequent loss in the polar loss cones.

Killen, R. M.↗

NASA NTRS1991

The Marshall Engineering Thermosphere model atmosphere Statistical Analysis Mode (MET-SAM)

The minimum, mean, and maximum exospheric temperature on the globe were calculated for every three hour period from 1947 through 1989 using the algorithms in the Marshall Engineering Thermosphere (MET) model and the appropriate solar activity input parameters. Cumulative percent frequency (CPF) distributions were then calculated for each of these temperatures at five levels of solar activity as defined by the 13-month smoothed values of the 10.7-cm solar radio noise flux. Next, the 50, 95, 97.7, and 100 percentile temperature values in each of these five levels of solar activity were curve fit as a function of the 13-month smoothed 10.7-cm flux. The resulting algorithms are used to compute the exospheric temperature in the MET model instead of the technique developed by Jacchia in his 1970 model. These temperatures are then used to enter tables to determine the total mass density and/or the atomic oxygen number density for application to engineering problems. Users can specify the risk level they are willing to accept in the results of analyses that require neutral atmosphere parameters inputs. The model eliminates the guess work in how to combine the solar activity input parameters to insure that the results provide answers at the proper risk levels.

Smith, Robert E.↗

NASA NTRS1994

Venus climate stability and volcanic resurfacing rates

The climate of Venus is to a large degree controlled by the radiative properties of its massive atmosphere. In addition, outgassing due to volcanic activity, exospheric escape processes, and surface/atmosphere interactions may all be important in moderating the abundances of atmospheric CO2 and other volatiles. We have developed an evolutionary climate model for Venus using a systems approach that emphasizes feedbacks between elements in the climate system. Modules for atmospheric radiative transfer, surface/atmosphere interactions, tropospheric chemistry, and exospheric escape processes have so far been developed. Climate feedback loops result from interconnections between modules, in the form of the environmental parameters pressure, temperature, and atmospheric mixing ratios. The radiative transfer module has been implemented by using Rosseland mean opacities in a one dimensional grey radiative-convective model. The model has been solved for the static (time independent) case to determine climate equilibrium points. The dynamics of the model have also been explored by employing reaction/diffusion kinetics for possible surface atmosphere heterogeneous reactions over geologic timescales. It was found that under current conditions, the model predicts that the climate of Venus is at or near an unstable equilibrium point. The effects of constant rate volcanism and corresponding exsolution of volatiles on the stability of the climate model were also explored.

Bullock, M. A.↗

NASA NTRS1993

Sounding rocket observation of a hot atomic oxygen geocorona

A sounding rocket measurement of the ultraviolet, atomic oxygen dayglow reveals an excess of emission compared to standard thermospheric model calculations at exospheric altitudes. We explore two explanations for this discrepancy: a breakdown of the radiative transfer model due to nonlocal thermal equilibrium (non-LTE) conditions above the exobase and a hot atomic oxygen geocorona. In particular, the effects of non-LTE on the 3P2, 1, 0 sublevel populations are modeled, and a hot O component in the upper thermosphere and lower exosphere is added to investigate the effects on the modeled emissions. For both cases, the data are reanalyzed and compared with the results using a standard LTE model. A hot O geocorona having a peak density of 10(exp 6)/cc at 550 km and a temperature of 4000 K is consistent with the data and appears to be the most reasonable explanation of the high-altitude enhanced emissions observed in the data.

Cotton, Daniel M.↗

NASA NTRS1995

Generation of Venus' nightside ionospheric structure by particle streams from cosmoids

A newly discovered source of energetic particle streams directed at Venus' nightside may cause several exosphere phenomena. The streams evolve from dispersed cosmoids, a surreptitious population of meteoroids in nearly hyperbolic orbits, measured with three dust experiments on Pioneer 10/11. Loose fragile comet-like ensembles of frozen volatile material, they are orders of magnitude more populous than short-period meteoroids. Dispersion is forced near a planet masking the meteor signature at Earth, but recently terrestrial exosphere interactions have been detected principally from VLF radar returns and as suddenly formed layers of neutral sodium and iron probed by lidar. Venus influx is estimated greater than 10(exp -14)(g)/((sq cm)(s)) with nightside directed kinetic power of greater than 0.3 (erg)/((sq cm)s)). Compared to Earth, Venus, lacking a dipole field with almost no rotation, has a readily recognized set of nightside interaction signatures of these downward energetic particle streams: i.e., density depressions of the neutral thermosphere, hydrogen and helium bulges, a non-disappearing ionosphere, electron holes, nightglows, VLF bursty signals, and local magnetic fields. From Pioneer Venus Orbiter (PVO) measurements, the cosmoid population, its temporal and solar azimuthal variation may be determined.

Dubin, M.↗

NASA NTRS1996

A Revised Thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM Version 3.4)

This report describes the newly-revised model thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM, Version 3.4). It also provides descriptions of other changes made to the program since publication of the programmer's guide for Mars-GRAM Version 3.34. The original Mars-GRAM model thermosphere was based on the global-mean model of Stewart. The revised thermosphere is based largely on parameterizations derived from output data from the three-dimensional Mars Thermospheric Global Circulation Model (MTGCM). The new thermospheric model includes revised dependence on the 10.7 cm solar flux for the global means of exospheric temperature, temperature of the base of the thermosphere, and scale height for the thermospheric temperature variations, as well as revised dependence on orbital position for global mean height of the base of the thermosphere. Other features of the new thermospheric model are: (1) realistic variations of temperature and density with latitude and time of day, (2) more realistic wind magnitudes, based on improved estimates of horizontal pressure gradients, and (3) allowance for user-input adjustments to the model values for mean exospheric temperature and for height and temperature at the base of the thermosphere. Other new features of Mars-GRAM 3.4 include: (1) allowance for user-input values of climatic adjustment factors for temperature profiles from the surface to 75 km, and (2) a revised method for computing the sub-solar longitude position in the 'ORBIT' subroutine.

Justus, C. G.↗

NASA NTRS1997

The Lunar Atmosphere: History, Status, Current Problems, and Context

After decades of speculation and fruitless searches, the lunar atmosphere was first observed by Apollo surface and orbital instruments between 1970 and 1972. With the demise of Apollo in 1972, and the termination of funding for Apollo lunar ground station studies in 1977, the field withered for many years, but has recently enjoyed a renaissance. This reflowering has been driven by the discovery and exploration of sodium and potassium in the lunar exosphere by groundbased observers, the detection of metal ions derived from the Moon in interplanetary space, the possible discoveries of H2O ice at the poles of the Moon and Mercury, and the detections of tenuous atmospheres around more remote sites in the solar system, including Mercury and the Galilean satellites. In this review we summarize the present state of knowledge about the lunar atmosphere, describe the important physical processes taking place within it, and then discuss related topics including a comparison of the lunar atmosphere to other surface boundary exospheres in the solar system.

Stern, S. Alan .↗

NASA NTRS2000

Variation of Lunar Sodium During Passage of the Moon through the Earth's Magnetotail

We measured sodium emission above the lunar equator over a range of lunar altitudes from 100 to 4000 km. The measurements were repeated approximately every 24 hours from June 7 to 16, 1998, covering the period during which the Moon passed through the Earth's magnetotail. Sodium temperatures derived from the altitude dependence of emission intensity ranged from 1200 to 2900 K. This result supports the view that photodesorption is a primary source of sodium in the exosphere since the most probable temperature of sodium form this source is in this range. Passage of the Moon through the Earth's magnetotail (where solar wind is essentially absent) affected the sodium density, such that it was higher before the Moon entered the Earth's magnetotail than after the Moon left it. This suggests that the solar wind plays a role in production of lunar sodium. We propose that its function is to mobilize sodium and bring it to the surface, where photodesorption can eject it into the exosphere. A two-step process such as this could help to explain the latitude dependence of sodium density, which varies as the second or higher power of cosine latitude.

Potter, Andrew E.↗

NASA NTRS2001

Solar Activity Forecasting for use in Orbit Prediction

Orbital prediction for satellites in low Earth orbit (LEO) or low planetary orbit depends strongly on exospheric densities. Solar activity forecasting is important in orbital prediction, as the solar UV and EUV inflate the upper atmospheric layers of the Earth and planets, forming the exosphere in which satellites orbit. Geomagnetic effects also relate to solar activity. Because of the complex and ephemeral nature of solar activity, with different cycles varying in strength by more than 100%, many different forecasting techniques have been utilized. The methods range from purely numerical techniques (essentially curve fitting) to numerous oddball schemes, as well as a small subset, called 'Precursor techniques.' The situation can be puzzling, owing to the numerous methodologies involved, somewhat akin to the numerous ether theories near the turn of the last century. Nevertheless, the Precursor techniques alone have a physical basis, namely dynamo theory, which provides a physical explanation for why this subset seems to work. I discuss this solar cycle's predictions, as well as the Sun's observed activity. I also discuss the SODA (Solar Dynamo Amplitude) index, which provides the user with the ability to track the Sun's hidden, interior dynamo magnetic fields. As a result, one may then update solar activity predictions continuously, by monitoring the solar magnetic fields as they change throughout the solar cycle. This paper ends by providing a glimpse into what the next solar cycle (#24) portends.

Schatten, Kenneth↗

NASA NTRS2001

Magnetosphere-Regolith/Exosphere Coupling: Differences and Similarities to the Earth Magnetosphere-Ionosphere Coupling

Of the three Mercury passes made by Mariner 10, the first and third went through the Mercury magnetosphere. The third encounter which occurred during northward IMF (interplanetary magnetic field) showed quiet time magnetic fields. In contrast the third encounter observed clear substorm signatures including dipolarization, field-aligned currents (FACs) and injection of energetic electrons at geosynchronous orbit. However, the determined cross-tail potential drop and the assumed height integrated conductance indicate that the FAC should be 2-50 times weaker than observed. We address this inconsistency and the fundamental problem of FAC closure whether this takes place in the regolith or in the exosphere. The current state of knowledge of the magnetosphere-exosphere/regolith coupling is addressed and similarities and differences to the Earth magnetosphere-ionosphere coupling are discussed.

Gjerleov, J. W.↗

NASA NTRS2001

Ar Atmosphere: Implications for Structure and Composition of Mercury's Crust

We examine the possibilities of sustaining an argon atmosphere by diffusion from the upper 10 km of crust, and alternatively by effusion from a molten or previously molten area at great depth . Ar-40 in the atmospheres of the planets is a measure of potassium abundance in the interiors since Ar-40 is a product of radiogenic decay of K-40 by electron capture with the subsequent emission of a 1.46 eV gamma-ray. Although the Ar-40 in the earth's atmosphere is expected to have accumulated since the late bombardment, Ar-40 in surface-bounded exospheres is eroded quickly by photoionization and electron impact ionization. Thus, the argon content in the exospheres of the Moon, Mercury and probably Europa is representative of current effusion rather than accumulation over the lifetime of the body. Argon content will be a function of K content, temperature, grain size distribution, connected pore volume and possible seismic activity. Although Mercury and the Moon differ in many details, we can train the solutions to diffusion equations to predict the average lunar atmosphere. Then these parameters can be varied for Hermean conditions. Assuming a lunar crustal potassium abundance of 300 ppm, the observed argon atmosphere requires equilibrium between the argon production in the upper 9 Km of the moon (1.135 x 10(exp -3) cm(exp -3) s(exp -1)) and its loss. Hodges et al. conclude that this loss rate and the observed time variability requires argon release through seismic activity, tapping a deep argon source. An important observation is that the extreme surface of the Moon is enhanced in argon rather than depleted, as one would expect from outgassing of radiogenic argon. Manka and Michel concluded that ion implantation explains the surface enhancement of Ar-40. About half of the argon ions produced in the lunar atmosphere would return to the surface, where they would become embedded in the rocks. Similarly, at Mercury we expect the surface rocks to be enhanced in Ar-40 wherever the magnetosphere has been open over time. Thus the measurement of surface composition will reveal the long-term effects of solar wind-magnetosphere interaction. Additional information is contained in the original extended abstract.

Killen, R. M.↗