Search NASA⌕ Search

SEARCH · Search NASA

Results for “fine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Single-Cell Metabolomics with Rapid Determination of Chemical Formulas from Isotopic Fine Structures

Metabolomic measurements can provide functional readouts of cellular states and phenotypes. Here, we present a protocol for single-cell metabolomics that permits direct untargeted detection of a broad number of metabolites under ambient conditions, without the need for sample processing, and with high confidence in the discovery and identification of the molecular formulas for detected metabolites. This protocol describes combining fiber-based laser ablation electrospray ionization (f-LAESI) with a 21 Tesla Fourier transform ion cyclotron resonance mass spectrometer (21T-FTICR-MS) to obtain high confidence molecular formula information about detected metabolites. The f-LAESI source utilizes mid-infrared laser ablation through a sharp optical fiber tip, affording direct ambient analysis of cells without the need for sample processing. Using the 21T-FTICR-MS as a mass analyzer enabled measurement of the isotopic fine structure (IFS) for numerous metabolites simultaneously from single cells, and the IFSs were in turn computationally processed to rapidly determine the corresponding elemental compositions. This metabolomics technique complements other single cell omics measurement methods, helping to resolve complex molecular interactions that take place within cells unattainable from single cell transcriptomic and proteomics methods.

mass spectrometry, FTICR, FTMS, ultrahigh mass res↗
DOE OSTI2021

Anomalous X-Ray Scattering and Extended X-Ray Absorption Fine Structure Study of the Local Structure of CrFeCoNiMo x (x = 0.11, 0.18, and 0.23) High-Entropy Alloys

Anomalous x-ray scattering (AXS) and extended x-ray absorption fine structure (EXAFS) were used to determine the local structure of Mo in CrFeCoNiMo x (x = 0.11, 0.18, and 0.23), a high-entropy alloy with a face-centered cubic (FCC) lattice. No superlattice peaks were observed down to the 10 -4 intensity level. This observation along with the nearly constant decrease of the FCC diffraction peaks above the Mo K absorption edge suggests that Mo atoms have no preferred site occupancy in the FCC lattice. Modeling of the EXAFS data suggests a local chemical order in CrFeCoNiMo x , where in Mo-rich samples (e.g., x = 0.23), Mo atoms are preferably surrounded by lighter atoms, such as Cr.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Potential reductions in fine particulate matter and premature mortality following implementation of air pollution controls on coal-fired power plants in India

Coal-fired power plants (CFPPs) account for > 70% of electricity generation in India, but < 5% of facilities have installed technologies for sulfur dioxide (SO 2 ) and nitrogen oxide (NO X ) removal. Emissions of these pollutants lead to the formation of fine particulate matter (PM 2.5 ) and an increased risk of premature mortality for exposed populations. Here, we use a nested version of the GEOS-Chem global chemical transport model (0.5° × 0.625° resolution) for India to estimate reductions in PM 2.5 concentrations that could have been achieved by implementing existing emission control technologies like flue-gas desulfurization (FGD) and/or selective catalytic reduction (SCR). We quantify the associated burden of disease using the integrated exposure response (IER) and global exposure mortality model (GEMM) functions and compare the costs of premature mortality to those for FGD installation. Model simulations for 2010 suggest installation of FGD would have reduced mean annual PM 2.5 concentrations across India by 8%, compared to 3% with SCR installation, and 11% with both FGD and SCR. A 7–28% reduction in PM 2.5 was simulated for local communities closest to CFPPs (same model grid cell), leading to up to 17% reduction in annual premature mortality. Overall, more than 0.21–0.48 million premature deaths would have been avoided over a 10-year period if FGD had been implemented on all CFPPs, compared to 0.09–0.21 million with SCR and 0.22–0.72 million with both FGD and SCR. Benefits associated with such actions are approximately $\$18.1$–$\$604$ billion USD per year, which is equivalent to ~ 0.44 to 10% of India’s GDP. These results suggest that monetary benefits from avoided premature mortality far outweigh the capital and operational costs of FGD and/or SCR installation of $\$19.5$ billion and/or $\$32.8$ billion per year, respectively. This information is essential because the high costs of installation and operation are often given as reasons for delaying installation and commissioning. Finally, we conclude that policy actions to control air pollution from CFPPs are economically justifiable.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2022

Paw-Net: Stacking ensemble deep learning for segmenting scanning electron microscopy images of fine-grained shale samples

Segmentation of scanning electron microscopy (SEM) images is critical yet time-consuming for geological analyses, as it needs to differentiate the boundaries for different mineral objects to facilitate subsequent analyses, such as porosity calculation. Recently, various machine learning methods, especially convolutional neural networks (CNNs), have been explored to segment SEM images of fine-grained shale samples. However, we found that general CNNs do not yield optimal performance due to insufficient training data and imbalanced objects in SEM images. This work has revised the U-Net architecture, a popular approach for biomedical image analyses, by incorporating a loss function that addresses the imbalance issue. Furthermore, we used the ensemble learning method to train multiple models and combined the results to improve the overall performance of segmentation. We prepared 2162 sub-images from raw SEM images in our experiments and divided them into training, validation, and testing datasets. The overall results show that our method improves the average Intersection over Union (IOU) of mineral objects from 0.49 to 0.58, compared to the original U-Net model. Our method can clearly distinguish each object from others with boundaries, even in highly imbalanced images. Training our models takes less than three minutes using a single GPU, while manual labeling can take up to three hours for each image. Furthermore, the method helps geoscientists gain insights quickly and effectively by building neural network models from a small dataset of SEM images.

58 GEOSCIENCES↗
DOE OSTI2021

Reactivity in cement pastes bearing fine fraction concrete and glass from construction and demolition waste: Microstructural analysis of viability

Converting construction and demolition waste (CDW) into secondary raw materials is one of the priorities of environmental policy and circular economy strategy. This study analysed the variation in eco-efficient paste reactivity with OPC replacement ratio (5% to 10%) and hydration time (2 d, 28 d and 90 d). Three types of CDW were explored: two (calcareous and siliceous) consisting of fine (4 AH{sub 13} and C{sub 4}AcH{sub 11}, ettringite and portlandite, were the same as observed in OPC hydration. These findings attest to the scientific viability recycling such CDWs as mineral additions in eco-cement manufacture and consequently eliminating the need for stockpiling these materials at recycling/storage plants.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dolomites in hydrated fine-grained Antarctic micrometeorites: Effective tools for analyzing secondary processes

We report detailed transmission electron microscope (TEM) observations of carbonates from one hydrated fine-grained Antarctic micrometeorite (H-FgMM). These carbonates show the occurrence of complex chemical variations and microstructures that provide important evidence regarding the formation and evolution of rarely analyzed H-FgMMs. The chemical variations were identified at both micrometer and nanometer scales, indicating that these carbonates formed under localized fluid conditions that suggest a variable chemical microenvironment. Individual carbonates grew from isolated reservoirs of fluid. Moreover, these carbonates contain manganese amounts almost twice as high as those measured in CM chondrites but similar to those identified in CI chondrites. Their particular compositions indicate reducing and progressively evolving conditions in the fluid from which these carbonates precipitated, probably due to water consumption during phyllosilicates formation. In addition to the compositional variability, microstructural features are pervasive in these carbonates, similar to those described in heavily shocked meteorites indicating that these carbonates were probably modified during shock processes after their formation. Since carbonates are highly susceptible to shock metamorphism, we suggest that it is essential to investigate their structure in detail before interpreting the isotopic measurements related to the time of their formation. Additionally, associated with carbonates, ubiquitous phosphates were identified in the micrometeorite analyzed. Future studies of these mineral associations will provide us further insight into the formation and evolution of asteroids, especially since they were both identified in the surface materials of Ryugu and Bennu.

58 GEOSCIENCES↗
DOE OSTI2022

Detection and attribution of long-term and fine-scale changes in spring phenology over urban areas: A case study in New York State

Spring phenology plays an essential role in climate change, terrestrial ecosystem, and public health. Field-based monitoring and understanding of changes in spring phenology for long periods and in large regions are challenging due to the limited in-site observations. Space-based remotely sensed observations offer great potentials for monitoring decadal spring phenology changes from regional to global scales. However, the coarse-scale remotely sensed observations are insufficient to capture fine-scale spring phenology dynamics, especially in urban areas, and this makes it challenging for understanding the combined effects of climate change and urbanization on spring phenology. We derived the start of phenology season (SOS) in New York State using 30 m Landsat observations from 1990 to 2015 to understand the impact of the environment and urbanization on SOS. The results show that SOS for different years reveals heterogeneous spatial distribution. Most regions of New York State have been experiencing significant spring phenology changes in form of earlier onset of vegetation greening, ranging from 0.2 to 0.6 day/year during 1990 to 2015, and this trend varies slightly with latitudes and urbanization levels. Further, spatial correlation analysis shows that the increase in temperature and urbanization could both promote the advancement of SOS. However, the effect of urbanization (partial correlation coefficient (R) ranges from −0.289 to −0.542) on SOS is greater than the effect of temperature (R ranges from 0.006 to −0.192). The study generates a high spatio-temporal resolution spring phenology dataset for ecological, environmental and public health studies, especially in urban areas, and reveals the importance of better accounting for the urbanization effects when quantifying the SOS dynamics in phenology models.

Landsat↗
DOE OSTI2021

Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0.5CoCrFeNi high-entropy alloy

The near equiatomic high-entropy alloys based on Al, Co, Cr, Fe, Ni have provided a novel microstructural template for alloy design. The face-centered cubic (FCC) matrix strengthened by body-centered cubic (BCC) based ordered B2 precipitates can be used to develop a new generation of precipitation strengthened alloys. The present study focuses on an Al0.5CoCrFeNi hypo-eutectic alloy consisting of an as-solidified FCC+B2 microstructure. Guided by solution thermodynamic modeling, this alloy has been isothermally aged for solid-state precipitation of a high fraction of fine-scale intragranular B2 particles. The dynamic compressive strength, hardness, and sliding wear response of the alloy as a function of B2 phase fraction is examined. The flow stress at 0.02% true strain increased from ~ 670 MPa to ~1350 (102%) MPa, the ultimate compressive strength increased from ~1160 MPa to 1500 MPa (20%), and the wear resistance increased more than 5 times with progressively increasing phase fraction of B2 precipitates.

Gwalani, Bharat↗
DOE OSTI2021

High radiation tolerance of an ultrastrong nanostructured NiCoCr alloy with stable dispersed nanooxides and fine grain structure

The present paper reports the irradiation behavior of nanostructured NiCoCr medium entropy alloy enhanced by Y-Hf-O nanooxides and fine grains produced by powder metallurgy. Ion beam irradiation to a peak dose of 130 dpa at 580°C produced neither detectable void swelling nor irradiation-induced hardening, in contrast to significant void swelling and property degradation of single phase NiCoCr concentrated solid-solution alloy under the similar irradiation condition. The dispersed nanooxides and high density of grain boundaries act as defect sinks that effectively annihilate irradiation-induced interstitials and vacancies. Furthermore, high-density nanooxides maintain their crystalline structures and stabilize the grain boundaries during irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of subfreezing testing temperature on tensile mechanical behavior of fine-grained magnesium

Here, the effect of testing temperature on mechanical properties and deformation mechanisms was investigated by tensile testing of fine-grained magnesium samples under a range of temperatures (i.e. room temperature 20°C, subfreezing temperatures 0°C, -30°C, and - 60°C) and microstructural observations of both untested and tested samples using electron backscatter diffraction. The results suggest that mechanical properties and deformation mechanisms were significantly affected by lowering testing temperature. Strength increased linearly and ductility decreased linearly with the decrease of testing temperature. Although twinning is generally known to be athermal, this experimental study shows that tensile twinning is the dominating deformation mechanism at room temperature, and that twinning is negligible and dislocation operation is the primary deformation mechanism at 0°C, -30°C, and -60°C

36 MATERIALS SCIENCE↗
DOE OSTI2023

Redox Mechanisms and Migration Tendencies in Earth-Abundant 0.7Li 2 MnO 3 ·0.3LiFeO 2 Cathodes: Coupling Spin-Resolved X-ray Absorption Near Edge and X-ray Absorption Fine Structure Spectroscopies

We report the use of iron 1s3p resonant X-ray emission processes to conduct spin-selective, high-energy resolution fluorescence detected X-ray absorption near-edge spectroscopy (HERFD-XANES) on an iron-containing, lithium- and manganese-rich, fully earth-abundant cathode material, Li 1.3 Mn 0.5 Fe 0.2 O 2 (0.7Li 2 MnO 3 ·0.3LiFeO 2 ). Coupling this technique with conventional Mn K-edge XANES and detailed extended X-ray absorption fine structure (EXAFS) analysis from both the Mn and Fe vantage points, we gain fundamental insights into the redox processes and migration tendencies of transition metals in this cathode material at the bulk level. We show that during the first charge, Fe 3+ undergoes oxidation to form Fe 4+ prior to the activation plateau. Toward the end of activation, a significant fraction of the iron is present as tetrahedral Fe 3+ . This observation reveals that iron migration from octahedral to tetrahedral sites and iron reduction are initiated during activation. Upon first discharge from the activated state, a continuous and overlapping reduction of both Fe and Mn is observed, with Fe largely restored back as an octahedrally coordinated Fe 3+ . The manganese local environment gradually changes to a distorted cooperative Jahn–Teller Mn 3+ structure during discharge, with the clear presence of two Mn–O as well as two Mn–Mn correlation distances at 2.0 V. The significant reduction of manganese in the very first discharge is distinctly different from that seen in typical nickel-based lithium-manganese-rich materials but is similar to that observed for pure Li 2 MnO 3 . In conclusion, these findings shed light on key structure–property correlations in the cathode material and point to a causative relationship between the redox mechanisms as well as structural changes endured by the material and relatively poor performance during extended electrochemical cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fine-Tuning Microporosity of Crystalline Vanadomolybdate Frameworks for Selective Adsorptive Separation of Kr from Xe

Selective adsorptive capture and separation of chemically inert krypton (Kr) and xenon (Xe) noble gases with very low ppmv concentrations in air and industrial off-gases constitute an important technological challenge. Here, using a synergistic combination of experiment and theory, the microporous crystalline vanadomolybdates (MoVO x ) as highly selective Kr sorbents are studied in detail. By varying the Mo/V ratios, we show for the first time that their one-dimensional (1D) pores can be fine-tuned for the size-selective adsorption of Kr over the larger Xe with selectivities reaching >100. Using extensive electronic structure calculations and grand canonical Monte Carlo simulations, the competition between Kr uptake with CO 2 and N 2 was also investigated. As most materials reported so far are selective toward the larger, more polarizable Xe than Kr, this work constitutes an important step toward robust Kr-selective sorbent materials. Furthermore this work highlights the potential use of porous crystalline transition metal oxides as energy-efficient and selective noble gas capture sorbents for industrial applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Fine Symmetry Breaking in High-Temperature Superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with Angle-Resolved Nonreciprocal Transport

After decades of research, symmetry breaking in high-temperature cuprate superconductors remains a key issue to resolve and is relevant to understanding their exotic quantum phases. In the prototypical cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212), the possible symmetry breaking has been mostly examined microscopically with scanning tunneling microscopy and photoemission spectroscopy. However, macroscopic evidence and the direct implications for electronic transport have remained elusive. Using superconductivity-enhanced nonreciprocal transport, we report macroscopic evidence of inversion symmetry breaking in Bi2212. While the inversion symmetry breaking is subtle, its effect on nonreciprocal transport is significantly enhanced by the vortex motion during the superconducting transition, leading to a robust manifestation of inversion symmetry breaking in macroscopic transport. Combining angle-resolved nonreciprocal transport and 3D tight-binding model calculations, we derive that the inversion symmetry breaking is due to subtle crystal distortions that give rise to both in-plane and out-of-plane polar axes. Our work not only establishes nonreciprocal transport as a sensitive macroscopic probe to provide electrical transport-based evidence of fine symmetry breaking in Bi2212, but also paves the way for novel device applications such as high-temperature superconducting diodes and superconducting spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Chemical Imaging of Fine Mode Atmospheric Particles Collected from a Research Aircraft over Agricultural Fields

Vegetation and crops in agricultural areas are a significant source of both biogenic secondary organic aerosols and of directly emitted primary biological atmospheric particles (PBAPs) composed of plant fragments/debris, fungal spores, pollen, and bacteria among others. Seasonal crop harvesting significantly intensifies regional PBAP emissions and aerosolizes soil organic matter and dust particulates. In this paper, the atmospheric contributions and impact of PBAPs have been insufficiently investigated due to limited real-time observations and ambiguity in their detection by existing measurement techniques. We collected ambient particles on-board an instrumented Beechcraft BE76 Duchess research aircraft flying above actively harvested agriculture fields of corn and soybean crops. In this work, particle samples were analyzed using complementary chemical imaging techniques, including computer-controlled scanning electron microscopy coupled with elemental microanalysis to describe particle-type population and scanning transmission X-ray microscopy to provide quantitative metrics on particle internal heterogeneity. We show the particle-class contribution is consistent between corn and soybean harvesting across altitudes of 100–300 m AGL. The contribution of PBAPs in the size range of 0.15–1.25 μm is estimated to be 10–12% of ~39,000 analyzed particles. Determining viscosity with X-ray microanalysis has shown that the fine-mode organic particles collected are viscous/semisolid (10 2 –10 12 Pa s) while the majority of PBAP fragments are solid (>10 12 Pa s). The observation of submicrometer, solid carbonaceous fragments of biogenic origin has implications for the regional cloud condensation nuclei and ice nuclei budget. Therefore, seasonal harvesting of crops may play an important, yet unrecognized, role in regional cloud formation and climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomically Fine-Tuning Organic–Inorganic Carbon Molecular Sieve Membranes for Hydrogen Production

Polymeric membranes with great processability are attractive for the H 2 /CO 2 separation required for hydrogen production from renewable biomass with carbon capture for utilization and sequestration. However, it remains elusive to engineer polymer architectures to obtain desired sub-3.3 Å ultramicropores to efficiently sieve H 2 from CO 2 . Herein, we demonstrate a scalable way of carbonizing polybenzimidazole (PBI) at low temperatures, followed by vapor phase infiltration (VPI) to atomically narrow ultramicropores throughout the films, forming hybrid organic–inorganic carbon molecular sieves (CMSs). One VPI cycle (100 s) for the PBI carbonized at 500 °C remarkably increases H 2 /CO 2 selectivity from 9.6 to 83 at 100 °C, surpassing Robeson’s upper bound. The CMS demonstrates a stable H 2 /CO 2 separation performance when challenged with simulated syngas streams and can be fabricated into thin-film composite membranes, outperforming state-of-the-art membranes. Finally, the scalable approach can be ubiquitous to molecularly fine-tune ultramicropores of leading polymeric membranes to further improve their size-sieving ability and thus separation efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Shaping the Water-Harvesting Behavior of Metal–Organic Frameworks Aided by Fine-Tuned GPT Models

Here, we construct a data set of metal–organic framework (MOF) linkers and employ a fine-tuned GPT assistant to propose MOF linker designs by mutating and modifying the existing linker structures. This strategy allows the GPT model to learn the intricate language of chemistry in molecular representations, thereby achieving an enhanced accuracy in generating linker structures compared with its base models. Aiming to highlight the significance of linker design strategies in advancing the discovery of water-harvesting MOFs, we conducted a systematic MOF variant expansion upon state-of-the-art MOF-303 utilizing a multidimensional approach that integrates linker extension with multivariate tuning strategies. We synthesized a series of isoreticular aluminum MOFs, termed Long-Arm MOFs (LAMOF-1 to LAMOF-10), featuring linkers that bear various combinations of heteroatoms in their five-membered ring moiety, replacing pyrazole with either thiophene, furan, or thiazole rings or a combination of two. Beyond their consistent and robust architecture, as demonstrated by permanent porosity and thermal stability, the LAMOF series offers a generalizable synthesis strategy. Importantly, these 10 LAMOFs establish new benchmarks for water uptake (up to 0.64 g g –1 ) and operational humidity ranges (between 13 and 53%), thereby expanding the diversity of water-harvesting MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fine Structure of Magnetospheric Magnetosonic Waves: 1. Elementary Rising‐Tone Emissions Within Individual Harmonic

Abstract The present study uncovers the fine structures of magnetosonic waves by investigating the EFW waveforms measured by Van Allen Probes. We show that each harmonic of the magnetosonic wave may consist of a series of elementary rising‐tone emissions, implying a nonlinear mechanism for the wave generation. By investigating an elementary rising‐tone magnetosonic wave that spans a wide frequency range, we show that the frequency sweep rate is likely proportional to the wave frequency. We studied compound rising‐tone magnetosonic waves, and found that they typically consist of multiple harmonics in the source region, and may gradually become continuous in frequency as they propagate away from source. Both elementary and compound rising‐tone magnetosonic waves last for ∼1 min which is close to the bounce period of the ring proton distribution, but their relation is not fully understood.

Li, Jinxing↗