Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite element simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Driving macro-scale transformations in three-dimensional-printed biopolymers through controlled induction of molecular anisotropy at the nanoscale

Motivated by the need to harness the properties of renewable and biodegradable polymers for the design and manufacturing of multi-scale structures with complex geometries, we have employed our additive manufacturing platform that leverages molecular self-assembly for the production of metre-scale structures characterized by complex geometries and heterogeneous material composition. As a precursor material, we used chitosan, a chemically modified form of chitin, an abundant and sustainable structural polysaccharide. We demonstrate the ability to control concentration-dependent crystallization as well as the induction of the preferred orientation of the polymer chains through the combination of extrusion-based robotic fabrication and directional toolpathing. Anisotropy is demonstrated and assessed through high-resolution micro-X-ray diffraction in conjunction with finite element simulations. Using this approach, we can leverage controlled and user-defined small-scale propagation of residual stresses to induce large-scale folding of the resulting structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Curvature effects in the reaction-diffusion system governing frontal polymerization

Frontal polymerization is a fast and energy-efficient curing process of thermoset polymers involving the self-sustained propagation of a sharp front that transforms a liquid monomer or gel into a polymer. The temperature, speed, and geometry of the polymerization front are closely intertwined quantities that can affect the curing process and the mechanical properties of the polymer. This work investigates the effect of the front curvature on the front propagation speed based on a reaction-diffusion model. The proposed analytical relations between front speed and curvature are verified by finite element simulations and validated through experiments. The models show that a concave front has a higher front temperature and speed than its convex counterpart. When the curvature of a convex front reaches a critical value, the reaction can no longer be sustained, and the front is quenched. The relation between the speed of a steadily propagating front and its geometry is derived, showing good agreement with experimental observations. This study also provides analytical estimates of the thickness of the polymerization front and insight into the relationship between the front curvature and the kinetics of the exothermic reaction.

42 ENGINEERING↗
DOE OSTI2025

A Misalignment Tolerant Magnetic Coupler Design and Implementation for Wireless Charging of Unmanned Aerial Vehicles (UAVs)

Wireless power transfer technology is getting more attention these days as a part of expanded battery charging infrastructure and network at a wide range of power levels. Charging Unmanned aerial vehicles (UAVs) is one wireless charging application, and charging their batteries can be challenging because they have short flight times and are frequently charged. For wireless charging of UAVs, the misalignment performance of the magnetic coupler pads is critical because landing on a charging pad at a perfectly aligned position is difficult and can be time-consuming. Different coil shapes and system structures have been proposed in the literature to overcome this challenge. A new design with a high misalignment tolerance is needed; therefore, to fill this gap, a wireless power transfer system has been designed for a 250 W UAV battery charging system with a new magnetic coupler design. A 3D model of the proposed design was created, and finite element simulations were performed. To prove the proposed design, the magnetic coupler prototypes were developed, and experimental results are presented herein. The misalignment tolerance of the proposed system was observed for various rotational positions of the secondary coil, from 0° to 360°. The results demonstrate that DC–DC efficiency varies between 80% and 85% within full 360° rotation of the receiver coil. This result enables the proposed system to address the misalignment problem for wireless charging of UAVs.

UAVs↗
DOE OSTI2020

Comparative Analysis of Capacitive Sensors with Different Geometrical layouts for Cable Insulation Degradation Detection

This paper presents a comparative analysis between an Interdigital Capacitor (IDC) sensor and a Serpentine Capacitive (SRC) sensor. The effects of electrode layouts on sensor performance are studied by means of finite element simulation where the geometrical dimensions (except electrode length) and material characteristics of both sensors are identical. Conformal IDC and SRC sensors with equal sensor area are modeled on a cable surface. The simulation results show a tradeoff between IDC and SRC sensors in terms of sensitivity and penetration depth. The SRC sensor shows 13.3% increase in sensitivity and 16.8% increase in capacitance compared to the IDC sensor, though the electric field penetration depth of the SRC sensor is 18.8% lower than the IDC sensor. In addition, the effects of change in electrode width, inter-electrode gap, and number of electrodes on SRC and IDC sensor comparative performance are evaluated.

Interdigital Capacitance, Serpentive Capacitive Se↗
DOE OSTI2017

Cogging Torque Minimization in Transverse Flux Machines

This paper presents the design considerations in cogging torque minimization in two types of transverse flux machines. The machines have a double stator-single rotor configuration with flux concentrating ferrite magnets. One of the machines has pole windings across each leg of an E-Core stator. Another machine has quasi-U-shaped stator cores and a ring winding. The flux in the stator back iron is transverse in both machines. Different methods of cogging torque minimization are investigated. Key methods of cogging torque minimization are identified and used as design variables for optimization using a design of experiments (DOE) based on the Taguchi method. A three-level DOE is performed to reach an optimum solution with minimum simulations. Finite element analysis is used to study the different effects. Two prototypes are being fabricated for experimental verification.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Delamination and Buckling Analysis of a Laminated Component in a High-speed Permanent Magnet Motor

High-speed permanent magnet (PM) machines are widely used because of their high-power density and high efficiency. The high rotation speed also inevitably subjects the PMs to high centrifugal load, which might damage them due to their inherent mechanical vulnerability, such as a much lower tensile strength than the compressive strength. To robustly transfer the torque from the magnet to the shaft, the outer diameter of the laminated rotor core is larger than the inner diameter of the rotor frame to ensure tight contact while working at 20,000 rpm. Motor manufacturing requires the shrink-fit method to assemble the rotor frame and rotor core. However, after the shrink-fit assembly, unexpected local delamination and buckling are observed on the rotor core part. Utilizing finite element simulation, we study the internal stress of assembling these two parts at the provided interference. Simulation results indicate the reasons for the delamination and buckling of the rotor core part and provide suggestions for improving the assembly.

Lin, Lianshan↗
DOE OSTI2020

Micromachined Piezoresistive-sensed Diaphragms for Infrasonic Monitoring

Micromachined, piezoresistive-sensed diaphragms are designed and fabricated specifically for infrasound sensing applications. Relatively large diaphragms, up to 6 mm × 6 mm, are fabricated to meet the high sensitivity requirements of infrasonic monitoring. A double-stack SOI wafer process is used, resulting in a streamlined two-mask process without the need for doping or ion-implantation. Pressure-sensitivities of diaphragms are studied using a custom static calibration set-up. Here, the piezoresistance of longitudinal and transverse resistors are studied over a large pressure range of ±5,500 Pa so that the linear and nonlinear response regions of diaphragms are observed. Measurements are compared against a nonlinear finite element simulation—shown to accurately predict the sensor’s behavior over a large response range.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

A Reconfigurable Planar Capacitor Sensor for Thru the Jacket Dielectric Constant Measurement of Cable Insulation

Planar capacitor sensors have been proposed to measure the aging-related dielectric constant variation of the jacket or insulation materials of cables. Although capacitor sensors have been used to monitor the aging of cable insulation by removing the jacket, through the jacket measurement of cable insulation dielectric constant variation is difficult because once the sensor is placed on the jacket it would either measure the aging of the jacket or that of the jacket and insulation together. A reconfigurable sensor along with innovative cable-specific models could be used to determine the jacket and insulation aging using the same sensor. For the proposed novel reconfigurable sensor, the electric field penetration depth is changed by activating and deactivating PIN diode switches. In one instance, the sensor measures the dielectric constant variation of the jacket, while in the next, it measures the dielectric constant variation of both the jacket and the insulation. Here, by leveraging previously developed capacitance estimation models from large-scale finite element simulations for a specific cable, these two sets of measurement data are used to evaluate the aging-related dielectric constant variation of the insulation. Experimental data from aged cable specimens are presented to demonstrate the operation of the sensor.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Performance of Low-Complexity Spectrally Selective One-Dimensional Mirrors for Photovoltaic Thermal Management

Operation at elevated temperatures is detrimental to the performance of crystalline Si solar modules. One method of reducing module operating temperature is selective reflection of sub-bandgap photons, which can otherwise only be absorbed parasitically. We numerically optimize the design of a series of multilayer photonic mirrors based on real materials using a previously developed optimization routine. Combined ray tracing and finite element simulations reveal the ability of each mirror to increase energy yield and decrease operating temperature. The best design outperforms a conventional glass antireflection coating, contains only nine layers, and maintains performance regardless of geographic location.

14 SOLAR ENERGY↗
DOE OSTI2017

Geometric prepatterning-based tuning of the period doubling onset strain during thin-film wrinkling

Wrinkling of thin films is an easy-to-implement and low-cost technique to fabricate stretch-tunable periodic micro and nanoscale structures. However, the tunability of such structures is often limited by the emergence of an undesirable period-doubled mode at high strains. Predictively tuning the onset strain for period doubling via existing techniques requires one to have extensive knowledge about the nonlinear pattern formation behavior. Herein, a geometric prepatterning-based technique is introduced that can be implemented even with limited system knowledge to predictively delay period doubling. The technique comprises prepatterning the film/base bilayer with a sinusoidal pattern that has the same period as the natural period of the system. This technique has been verified via physical and computational experiments on the polydimethylsiloxane (PDMS)/glass bilayer system. It is observed that the onset strain can be increased from the typical value of 20% for flat films to greater than 30% with a modest prepattern aspect ratio (2·amplitude/period) of 0.15. In addition, finite element simulations reveal that (i) the onset strain increases with increasing prepattern amplitude and (ii) the delaying effect can be captured entirely by the prepattern geometry. Therefore, one can implement this technique even with limited system knowledge, such as material properties or film thickness, by simply replicating pre-existing wrinkled patterns to generate prepatterned bilayers. Furthermore, geometric prepatterning is a practical scheme to increase the operating range of stretch-tunable wrinkle-based devices by at least 50%.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Experimental Characterization and Numerical Modeling of the Interaction Between Carbon Fiber Composite Prepregs During a Preforming Process

We report carbon fiber reinforced composites have received growing attention because of their superior performance and high potential for lightweight systems. An economic method to manufacture the parts made of these composites is a sequence of forming followed by a compression molding. The first step in this sequence is called preforming that forms the prepreg, which is the fabric impregnated with the uncured resin, to the product geometry, while the molding process cures the resin. Slip between different prepreg layers is observed in the preforming step, and it is believed to have a non-negligible impact on the resulting geometry. This paper reports a method to characterize the interaction between different prepreg layers, which should be valuable for future predictive modeling and design optimization. An experimental device was built to evaluate the interactions with respect to various industrial production conditions. The experimental results were analyzed for an in-depth understanding about how temperature, relative sliding speed, and fiber orientation affect the tangential interaction between two prepreg layers. Moreover, a hydro-lubricant model was introduced to study the relative motion mechanism of this fabric-resin-fabric system, and the results agreed well with the experiment data. Lastly, the interaction factors obtained from this research will be implemented in a preforming process finite element simulation model.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Iterative Stress Reconstruction Algorithm to Estimate Three-Dimensional Residual Stress Fields in Manufactured Components

Residual stress (RS) significantly impacts the mechanical performance of components. Measurement of RS often provides incomplete data in terms of components of stress and spatial density. Employing such fields in finite element simulations results in significant modification of the field to achieve equilibrium and compatibility among strains. To overcome this, an iterative stress reconstruction algorithm (ISRA) is developed to estimate 3D RS fields that satisfy equilibrium, are stress component-wise complete, and represent the characterized data sampled. An Al 7075-T651 plate and an additively manufactured (AM) A36 steel wall are considered for RS reconstruction using measurement data from the literature. A maximum variation of ~2.5 MPa in the Al plate, and ~10 MPa in the steel wall are observed between the reconstructed and measured stresses. Furthermore, unknown stress components emerge and reach significant magnitudes (upto ~2.3 MPa in the Al plate and ~45 MPa in the AM wall) during ISRA. Indeed, it is found that minor errors in measurement or data processing are eliminated through the physical requirements during ISRA. Employing a reconstructed RS field is hence not just more accurate given its compatibility, but it additionally corrects for minor errors in measurement. Furthermore, it is found that spatially dense measurement data result in convergence with fewer iterations. Finally, although ISRA yields a nonunique solution dependent on boundary conditions, measurement errors, fitting errors, and mesh density, it accommodates for uncertainties and inaccuracies in measurement, as opposed to failing to reach a physically realistic converged solution.

42 ENGINEERING↗
DOE OSTI2018

Investigation of cadmium telluride grown by molecular-beam epitaxy using micro-Raman spectroscopy below and above the laser damage threshold

The effects of visible laser light on cadmium telluride (CdTe), grown by molecular beam epitaxy, are studied at low (48 μ W/ μ m 2 ) and high (480 μ W/ μ m 2 ) laser power densities using micro-Raman spectroscopy. The Raman spectrum of CdTe shows no notable change at low power density ~48 μ W/ μ m 2 for prolonged laser exposure. At higher power density ~480 μ W/ μ m 2 , the Raman spectrum is significantly changed and strong Te-related peaks appear in the spectrum, even for short laser exposure times suggesting that photo-induced Te enrichment happens at the CdTe surface at high laser power density. The temperature rise is estimated from observed shifts in the Te and CdTe optical phonon peaks and modeled using finite-element simulations. At laser power 480 μ W/ μ m 2 , the CdTe exhibits a rise of ~44 °C above room temperature while the observed change in Te temperature is significantly higher, ~179 °C. Furthermore, the approach illustrates steps needed to establish the laser damage threshold for CdTe.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Two-Layer Anti-Reflection Coatings with Optimized Sub-Bandgap Reflection for Solar Modules

The efficiency of a crystalline silicon solar module decreases as its operating temperature rises. Module cooling is possible via selective reflection of sub-bandgap photons so that they are not parasitically absorbed. Selecting from a library of common dielectrics, we numerically optimize the design of two-layer mirrors at the outer glass surface of a crystalline Si solar cell module. The mirrors are designed to maximize the annual energy yield of a module by both reflecting light below the bandgap and enhancing the transmission of light above the bandgap. Combined ray-tracing and finite element simulations determine the power output and temperature of the module over time. Since any two-layer mirror would replace a conventional single-layer glass anti-reflection coating on the module glass, we study the ability of a two-layer structure to improve on a single-layer coating. The best two-layer designs improve the annual energy yield over a module with a glass anti-reflection coating and reduce the module operating temperature.

14 SOLAR ENERGY↗
DOE OSTI2022

Time reversal in a phononic crystal using finite-element modeling and an equivalent circuit model

A phononic crystal acts as a dispersive medium with a phase speed that is lower than the bulk wave speed at frequencies below the resonance of a single resonator. Time reversal is used to compensate for the phase shifts caused by individual resonators as the waves enter the medium and enable focusing of acoustic waves among the crystal. An equivalent circuit, which can predict the dispersion and attenuation of the crystal model, is shown and compared to a full-wave finite-element simulation in frequency and time. The phase shift due to a single resonator is also depicted.

Kingsley, Adam D. (ORCID:0000000226611788)↗
DOE OSTI2023

Imaging the breaking of electrostatic dams in graphene for ballistic and viscous fluids

The charge carriers in a material can, under special circumstances, behave as a viscous fluid. Here, in this work, we investigated such behavior by using scanning tunneling potentiometry to probe the nanometer-scale flow of electron fluids in graphene as they pass through channels defined by smooth and tunable in-plane p-n junction barriers. We observed that as the sample temperature and channel widths are increased, the electron fluid flow undergoes a Knudsen-to-Gurzhi transition from the ballistic to the viscous regime characterized by a channel conductance that exceeds the ballistic limit, as well as suppressed charge accumulation against the barriers. Our results are well modeled by finite element simulations of two-dimensional viscous current flow, and they illustrate how Fermi liquid flow evolves with carrier density, channel width, and temperature.

Science & Technology - Other Topics↗
DOE OSTI2017

Microscale 2.5D Batteries

3D solid-state batteries use vertical topography to increase both energy and power density relative to batteries with planar geometry. Here we investigate, using finite element simulations, a battery that incorporates a 3D cathode consisting of a vertical array of microcolumns, and a planar 2D anode, which we call a 2.5D battery. By confining the 3D structure to the cathode we greatly simplify the battery fabrication process (i.e., 3D structure only needs to be introduced into one electrode) at the cost of introducing a non-uniform electrolyte thickness in which the anode-cathode distance varies significantly across different parts of the battery. We use simulations to show that a non-uniform electrolyte thickness results in inhomogeneous lithiation and subsequent underutilization of the cathode. The underutilization of the cathode can be avoided by using an electrolyte with sufficient ionic conductivity, which suggests that non-uniform electrolyte thickness can be tolerated in high ionic conductivity electrolytes but should be avoided in low ionic conductivity electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2024

DiscoFluxM version 1.x

DiscoFluxM is software for modeling the deformation behavior of crystalline materials within the third-party finite-element based software, MOOSE. The software enables full-field crystal plasticity finite element simulations of deformation processes of metals and other crystalline materials. DiscoFluxM is an implementation of the DiscoFlux theoretical and algorithmic framework for coupling single-crystal plasticity with dislocation transport. The continuum mesoscale modeling framework is founded upon a nonlocal dislocation-density based crystal plasticity theory. The nonlocal theory couples continuum dislocation transport with an otherwise spatially-local single-crystal model employing nonlinear thermoelasticity and crystallographic plasticity. Dislocation transport is modeled by enforcing dislocation conservation at a slip-system level through the solution of advection-diffusion equations. The configuration of geometrically necessary dislocation density gives rise to a back-stress that inhibits or accentuates the flow of dislocations.

Luscher, Darby↗