Search NASA⌕ Search

SEARCH · Search NASA

Results for “forward scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Measurement of Off-Body Velocity, Pressure, and Temperature in an Unseeded Supersonic Air Vortex by Stimulated Raman Scattering

A noninvasive optical method is used to make time-averaged (30 sec) off-body measurements in a supersonic airflow. Seeding of tracer particles is not required. One spatial component of velocity, static pressure, and static temperature are measured with stimulated Raman scattering. The three flow parameters are determined simultaneously from a common sample volume (0.3 by 0.3 by 15 mm) using concurrent measurements of the forward and backward scattered line shapes of a N2 vibrational Raman transition. The capability of this technique is illustrated with laboratory and large-scale wind tunnel testing that demonstrate 5-10% measurement uncertainties. Because the spatial resolution of the present work was improved to 1.5 cm (compared to 20 cm in previous work), it was possible to demonstrate a modest one-dimensional profiling of cross-flow velocity, pressure, and translational temperature through the low-density core of a stream-wise vortex (delta-wing model at Mach 2.8 in NASA Langley's Unitary Plan Wind Tunnel).

Herring, Gregory C.↗

Laboratory-Based BRDF Calibration of Radiometric Tarps

The current study provides the remote sensing community with important high accuracy laboratory-based BRDF calibration of radiometric tarps. The results illustrate the dependence of tarps' weft and warp threads orientation on BRDF. The study was done at incident angles of 0deg, 10deg, and 30deg; scatter zenith angles from 0deg to 60deg, and scatter azimuth angles of 0deg, 45deg, 90deg, 135deg, and 180deg. The wavelengths were 485nm, 550nm, 633nm and 800nm. The dependence is well defined at all measurement geometries and wavelengths. It can be as high as 8% at 0deg incident angle and 2% at 30deg incident angle. The fitted BRDF data show a very small discrepancy from the measured ones. New data on the forward and backscatter properties of radiometric tarps is reported. The backward scatter is well pronounced for the white samples. The black sample has well pronounced forward scatter. The BRDF characterization of radiometric tarps can be successfully extended to other structured surface fabric samples. The results are NIST traceable.

Georgiev, Georgi T.↗

Laboratory-Based Bidirectional Reflectance Distribution Functions of Radiometric Tarps

Laboratory-based bidirectional reflectance distribution functions of radiometric tarp samples used in the vicarious calibration of Earth remote sensing satellite instruments are presented in this paper. The results illustrate the BRDF dependence on the orientation of the tarps weft and warp threads. The study was performed using the GSFC scatterometer at incident zenith angles of 0 deg, 10 deg, and 30 deg; scatter zenith angles from 0 deg. to 60 deg.; and scatter azimuth angles of 0 deg., 45 deg., 90 deg., 135 deg. and 180 deg. The wavelengths were 485nm, 550nm, 633nm and 800nm. The tarp's weft and warp dependence on BRDF is well defined at all measurement geometries and wavelengths. The BRDF difference can be as high as 8% at 0o incident angle and 12% at 30 deg. incident angle. The fitted BRDF data shows a very small discrepancy from the measured ones. New data on the forward and backscatter properties of radiometric tarps are reported. The backward scatter is well pronounced for the white samples. The black sample has well pronounced forward scatter. The provided BRDF characterization of radiometric tarps is an excellent reference for anyone interested in using tarps for radiometric calibrations. The results are NIST traceable.

Georgiev, Georgi T.↗

Developing a Radar Signal Simulator for the Community Radiative Transfer Model

Active radar instruments provide vertically resolved clouds and precipitation measurements that cannot be provided by the passive instruments. These active measurements are not conventionally assimilated into the data assimilation systems because of the lack of fast forward radiative transfer models and also difficulties in the error modelling of the measurements. This paper describes the development, evaluation, and sensitivity analysis for a forward radar model implemented in the Community Radiative Transfer Model (CRTM). The scattering properties required by the forward model are provided by the hydrometeor lookup tables that were generated using the discrete dipole approximation. The model is able to calculate both the reflectivity and the attenuated reflectivity for any given radar instrument at any given zenith angles as long as CRTM instrument specific coefficients are available. The evaluation using CloudSat measurements shows a very good agreement between the simulations and measurements as long as the input profiles of hydrometeors are consistent with the measured reflectivity profiles. Major sources contributing to the differences between the measured and simulated reflectivities are input hydrometeor profiles, scattering lookup tables, lack of melting layer in the forward model, CRTM scattering solvers, and attenuation calculations. In addition to the forward model, both Tangent Linear and Adjoint of the model are also implemented and tested within CRTM. These components may be required by some data assimilation systems for the assimilation of radar measurements.

radar↗

Comparison of Lidar and In-Situ Measurements of Stratospheric Aerosols

This paper will present the results of a comparative study conducted in Laramie, Wyoming, during the summer and fall of 1972, as part of the Department of Transportation's Climatic Impact Assessment Program (ClAP). The study included independent, and nearly simultaneous, measurements of stratospheric aerosols using a LIDAR system and a balloon-borne in-situ particle counter. The LIDAR provides a remote measurement of volume backscatter (aerosols and molecules) in a narrow wavelength region centered at the ruby wavelength (6943R); whereas the balloon-borne in-situ counter measures aerosol concentration by counting aerosols greater than approx. 0.30 microns in diameter as they are pumped through a chamber and scatter white light forward into photo-detectors. The comparison of measurements that will be discussed using the two techniques involves formulating the LIDAR data so that it is compatible with the counter data. The formulation includes separation of the scattering due to aerosols from the total and displaying this in terms of aerosol scattering function. Aerosol scattering function is proportional to aerosol concentration if the aerosol parameters, such as size distribution and composition, are constant with altitude. In separating the aerosol scattering from the total, the need for real atmospheric number density over the Standard Atmosphere is also discussed.

Melfi, S. H.↗

Backscattering by nonspherical particles - A review of methods and suggested new approaches

Scattering of electromagnetic radiation near the backward direction is more sensitive to particle shape than scattering near the forward direction. Mie theory is therefore of dubious applicability to predicting backscattering by atmospheric particles known to be irregular or to inverting measurements on such particles. An irregular particle is one with an uncertain shape. In the face of uncertainty one must adopt a statistical approach in which scattering properties of ensembles are determined. To obtain ensemble averages, a basis is needed for averaging over a set of electromagnetic microstates. Ensemble averages based on the Rayleigh theory for small ellipsoids and on the T matrix method for spheroids agree better with measurements than Mie theory does. The coupled-dipole method also provides a basis for ensemble averaging. This method also leads to a simple physical interpretation of why backscattering is so sensitive to particle shape and can be used to calculate scattering by one- and two-dimensional analogs to three-dimensional irregular particles.

Bohren, Craig F.↗

The Architecture of the LkCa 15 Transitional Disk Revealed by High-contrast Imaging

We present four new epochs of Ks-band images of the young pre-transitional disk around LkCa 15, and perform extensive forward modeling to derive the physical parameters of the disk. We find indications of strongly anisotropic scattering (Henyey-Greenstein g = 0.67+0.18 −0.11) and a significantly tapered gap edge ('round wall'), but see no evidence that the inner disk, whose existence is predicted by the spectral energy distribution, shadows the outer regions of the disk visible in our images. We marginally confirm the existence of an offset between the disk center and the star along the line of nodes; however, the magnitude of this offset (x = 27+19 −20 mas) is notably lower than that found in our earlier H-band images (Thalmann et al. 2010). Intriguingly, we also find, at high significance, an offset of y = 69+49 −25 mas perpendicular to the line of nodes. If confirmed by future observations, this would imply a highly elliptical- or otherwise asymmetric-disk gap with an effective eccentricity of e ≈ 0.3. Such asymmetry would most likely be the result of dynamical sculpting by one or more unseen planets in the system. Finally, we find that the bright arc of scattered light we see in direct imaging observations originates from the near side of the disk, and appears brighter than the far side because of strong forward scattering.

anisotropic scattering↗

The Architecture of the LkCa 15 Transitional Disk Revealed By High-Contrast Imaging

We present four new epochs of Ks-band images of the young pre-transitional disk around LkCa 15 and perform extensive forward modeling to derive the physical parameters of the disk. We find indications of strongly anisotropic scattering (Henyey-Greenstein g = 0.67 (+0.18/−0.11)) and a significantly tapered gap edge ("round wall") but see no evidence that the inner disk, whose existence is predicted by the spectral energy distribution, shadows the outer regions of the disk visible in our images.We marginally confirm the existence of an offset between the disk center and the star along the line of nodes; however, the magnitude of this offset (x = 27 (+19/−20) mas) is notably lower than that found in our earlier H-band images. Intriguingly, we also find an offset of y = 69 (+49/−25) mas perpendicular to the line of nodes at high significance. If confirmed by future observations, this would imply a highly elliptical - or otherwise asymmetric - disk gap with an effective eccentricity of e ≈ 0.3. Such asymmetry would most likely be the result of dynamical sculpting by one or more unseen planets in the system. Finally, we find that the bright arc of scattered light we see in direct imaging observations originates from the near side of the disk and appears brighter than the far side because of strong forward scattering.

dynamical sculpting↗

Single and multiple scattering contributions to circumsolar radiation

The contributions to the angular distribution of the almucantar radiance in the forward direction due to multiple scattering are compared to those due to single scattering. The contributions have been calculated by a computer code employing the Gauss-Seidel iterative approach to the solution of the radiative transfer equation for a plane parallel atmosphere composed of air molecules, aerosol particles, and ozone. The code is similar to that of Dave (1972) except in the construction of the source matrix. In the near-forward direction the multiple scattering contributions are significant for optical depths of the order of 0.4. The shape of the angular distribution of almucantar radiance to 10 degrees is less sensitive to multiple scattering.

Box, M. A.↗

Electron Excitation Cross Sections for the 2s(sup 2)2p(sup 3) (sup 4)S -> 2s(sup 2)2p(sup 3) (sup 2d) ->2s2p(sup 4) (sup 4p) (Resonance) Transitions in Oil

Experimental and theoretical excitation cross sections are reported for the first forbidden transition xxx and the first allowed (resonance) transition xxx in OII. Use is made of electron-energy loss and merged beams methods. The electron energy range covered is 3.33 eV (threshold) to 15 eV for the S->D transition, and 14.9 eV (threshold) to 40 eV for the S->P transition. Care was taken to assess and minimize the metastable fraction of the OII beam. An electron mirror was designed and tested to reflect inelastically back-scattered electrons into the forward direction to account for the full range of polar scattering angles. Comparisons are made between present experiments and 11-state R-Matrix calculations. Calculations are also presented for the xxx transition.

electron excitation↗

Scattering characteristics of Martin Black at 118 microns

BRDF (bidirectional reflectance distribution function) values for 0.000118 m radiation at different angles of incidence and different scattering angles from the Infrared Astronomical Satellite telescope baffle coated with Martin Black are presented. Data from scatterometer experiments are collected and the BRDF and beta - beta sub 0 (sin theta sub s - sin theta sub 0) values are calculated based on the geometry, the voltage readings, the attenuators in the beam, and the calculated reference levels. A composite curve of forward and backward scattering data for several angles of incidence shows a peak near the specular direction (beta - beta sub 0 = 0), which is the instrument profile reduced by the 20% specular reflection of the Martin Black. The nonspecular part of the reflectivity indicates the slightly specular but largely Lambertian character of the coating. Data for the specular reflectivity as a function of the incidence angle unexpectedly shows a decrease in the specular reflectance with increasing angle of incidence.

Brooks, L. D.↗

The Atmosphere and Haze of Mars

The 'blue haze' is an absorbing smoke, dark as soot in reflection, red in transmission. Its currently accepted explanation by pure scattering (omnidirectional or forward) is untenable, as it would either increase the surface brightness of fall to obscure the surface details. The limb darkening of Mars is mainly the results of absorption by the smoke. The opacity of the Martian atmosphere increases from the red toward the violet. The extinction by the Martian atmosphere is greater than that by the terrestrial at all wavelengths, but only about 20 per cent of the Martian extinction is due to scattering. Dollfus' polarimeteric estimate, corrected for self-absorption, corresponds to a martian atmospheric pressure of 87 mm Hg. The photochemical breakup of carbon dioxide and the escape of oxygen must lead to considerable concentrations of carbon monoxide in the martian atmosphere.

HAZE↗

Using Scattered Light From Nadir Port to Aid the Terra and Aqua MODIS Reflective Solar Band Calibration

The MODIS instruments on the Terra and Aqua spacecraft employ a solar diffuser (SD) and a solar diffuser stability monitor (SDSM) system to calibrate their reflective solar bands (RSBs), covering a spectral range from 0.4 to 2.1 µm. The UV exposure of the SD, from its sun-view port as well as the scattered light (sunlight reflected from top-of-atmosphere), has led to a wavelength dependent degradation of the SD, with larger degradation observed at shorter wavelengths. The scatter off the diffuser onto the scan mirror is in the forward direction, whereas the scatter off the diffuser onto the SDSM fold mirror is in the backward direction. Since the outgoing angles (viewed by MODIS detectors) are the same as the scheduled SD calibration, the gain derived from scattering light facilitates monitoring the dependence of the SD’s degradation on incident angles. In this paper, we present a method that uses multiple orbits over each mission to obtain a SD response to the nadir port illumination. The SD degradation estimated from the nadir port illumination is compared with the degradation derived from the sun-illuminated SD. As both Terra and Aqua spacecraft continue to drift from their nominal orbits, the SD calibration mechanism has been adapted to these drifts, especially in terms of characterizing the transmission screen function. This paper also presents the utility of this scattering light data to support the RSB calibration in the post-nominal orbit drift era of operations.

MODIS↗

Light scattering by ice clouds in the visible and infrared - A theoretical study.

Computations of the intensity and linear polarization for single scattering by ice clouds have been made based on the assumption that the particles in ice clouds can be approximated by long circular cylinders which are allowed to be polydispersive as well as arbitrarily oriented in space. The results of two models of optically thin ice clouds are presented and compared with those for polydisperse ice spheres. The two models for ice cylinders are assumed to be either uniformly or randomly oriented in a horizontal plane. Four different wavelengths, 0.7, 3, 3.5 and 6.05 microns, are employed in the light scattering computations. It is found that, compared to ice spheres, long ice cylinders scatter more light in the region with scattering angles near 90 deg, at the expense of scattering in both the forward and backward directions. The glory and cloudbows, which occur in light scattered by spherical particles, are either lost (the glory) or largely reduced and distorted (the cloudbows in the case of cylinders). It is probable that for more irregular particles the cloudbows would also disappear. These differences in scattering by spherical and non-spherical scatterers therefore provide useful information for the differentiation between the ice and liquid phase of cloud particles.

Liou, K.-N.↗

Low energy ionizing collisions between N2 and CO beam molecules and CO, N2, NO, CH4, and CO2 target molecules

Absolute total negative charge production cross sections for N2 + CO, CO + N2, CO + CO, N2 + NO, N2 + CH4, and N2 + CO2 collisions are reported, and a simple model of collisions is discussed. The cross sections were measured to within about 1 eV of their thresholds. Specific reaction channels were investigated by referring to mass spectrometric identification of the product ions scattered in the forward direction, and these product ion identifications were used to explain characteristic structures in the total charge production cross sections in the near-threshold regions. The extent of the importance of dissociative ionization and 'simple' ionization in the studied collisions at low energy is considered, and charge transfer cross sections for (CO)+ + CO, CO(+) + CH4, and N2(+) + CH4 are presented.

Utterback, N. G.↗

Laser velocimetry with diode junctions semiconductor lasers

Measurements of mean and fluctuating axial velocity have for the first time been made in a seeded pipe flow with a semiconductor laser velocimeter. Several compact velocimeters have been constructed using laser diodes. While the intended applications have restricted the final instrument to operate in a coaxial backscatter mode, operation has been demonstrated in forward and side scattering modes. In all cases the instrument could be classed as dual beam. An instrument has been constructed to be installed in a model airfoil and will be mechanically driven to measure the flow over a 75-mm chord distance. The instrument occupies a volume measuring 100 mm x 100 mm x 40 mm. The compactness has been aided by using an avalanche photodiode instead of a photomultiplier tube.

Franke, J. M.↗