Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The Lyman-alpha observations of comet Kohoutek from Mariner 10

The paper presents the Lyman-alpha data from postperihelion observations of comet Kohoutek made with Mariner 10 UV spectrometer during the 1974 January 11-24 period when the comet distance from the sun varied from 0.521 AU to 0.860 AU. These data are analyzed to determine the hydrogen production rates. It is noted that observations against the low interplanetary background allowed a measurement of the hydrogen corona over 30 million km (or 15 minutes) as seen from the Mariner 10 spacecraft. The bulk of the observations can be fitted with a non-steady-state model assuming two velocity components (20 km/sec and 8 km/sec) of equal proportions. A 70% increase in the hydrogen production rate is found within 2 days from January 17 to 19 while the comet receded from the sun. Finally, it is noted that the postperihelion production rates from the Mariner 10 observations are comparable to the preperihelion production rates reported previously.

Kumar, S.↗
NASA NTRS2013

Warm Pressurant Gas Effects on the Liquid Hydrogen Bubble Point

This paper presents experimental results for the liquid hydrogen bubble point tests using warm pressurant gases conducted at the Cryogenic Components Cell 7 facility at the NASA Glenn Research Center in Cleveland, Ohio. The purpose of the test series was to determine the effect of elevating the temperature of the pressurant gas on the performance of a liquid acquisition device. Three fine mesh screen samples (325 x 2300, 450 x 2750, 510 x 3600) were tested in liquid hydrogen using cold and warm noncondensible (gaseous helium) and condensable (gaseous hydrogen) pressurization schemes. Gases were conditioned from 0 to 90 K above the liquid temperature. Results clearly indicate a degradation in bubble point pressure using warm gas, with a greater reduction in performance using condensable over noncondensible pressurization. Degradation in the bubble point pressure is inversely proportional to screen porosity, as the coarsest mesh demonstrated the highest degradation. Results here have implication on both pressurization and LAD system design for all future cryogenic propulsion systems. A detailed review of historical heated gas tests is also presented for comparison to current results.

Liquid Hydrogen↗
DOE OSTI2023

Triphenylborane in Metal-Free Catalysis

The development and application of new organoboron reagents as Lewis acids in synthesis and metal-free catalysis have dramatically expanded over the past 20 years. In this context, we will show the recent uses of the simple and relatively weak Lewis acid BPh 3 —discovered 100 years ago—as a metal-free catalyst for various organic transformations. The first part will highlight catalytic applications in polymer synthesis such as the copolymerization of epoxides with CO 2 , isocyanate, and organic anhydrides to various polycarbonate copolymers and controlled diblock copolymers as well as alternating polyurethanes. This is followed by a discussion of BPh 3 as a Lewis acid component in the frustrated Lewis pair (FLP) mediated cleavage of hydrogen and hydrogenation catalysis. In addition, BPh 3 -catalyzed reductive N-methylations and C-methylations with CO 2 and silane to value-added organic products will be covered as well along with BPh 3 -catalyzed cycloadditions and insertion reactions. Collectively, this mini-review showcases the underexplored potential of commercially available BPh3 in metal-free catalysis.

Lewis acid↗
NASA NTRS1976

Iron line emission from a high-temperature plasma in Cassiopeia A

The letter reports a measurement of the X-ray spectrum of Cas A with a proportional counter on board OSO-8. The high-energy data (greater than 7 keV) are found to agree equally well with a power law having a number index of about 4.5 and with a thermal spectrum having kT of about 3.9 keV. A narrow iron line predicted by the thermal model is also observed; this line is centered at about 6.67 keV and has an equivalent width of approximately 1270 eV. The low-energy data (below 6 keV) are not fully accounted for by the above thermal spectrum, but are fitted well by an additional low-temperature thermal component with kT not exceeding 0.7 keV and an atomic hydrogen column density of approximately 10 to the 22nd power per sq cm. The iron abundance in the plasma at an electron temperature of 40 keV is estimated from the observed line-to-continuum ratio, and it is shown that a normal cosmic iron abundance is adequate to explain the observation.

Pravdo, S. H.↗
NASA NTRS1978

Diffuse gamma radiation

Results are reported for an investigation of the intensity, energy spectrum, and spatial distribution of the diffuse gamma radiation detected by SAS 2 away from the galactic plane in the energy range above 35 MeV. The gamma-ray data are compared with relevant data obtained at other wavelengths, including 21-cm emission, radio continuum radiation, and the limited UV and radio information on local molecular hydrogen. It is found that there are two quite distinct components to the diffuse radiation, one of which shows a good correlation with the galactic matter distribution and continuum radiation, while the other has a much steeper energy spectrum and appears to be isotropic at least on a coarse scale. The galactic component is interpreted in terms of its implications for both local and more distant regions of the Galaxy. The apparently isotropic radiation is discussed partly with regard to the constraints placed on possible models by the steep energy spectrum, the observed intensity, and an upper limit on the anisotropy.

Fichtel, C. E.↗
NASA NTRS1980

Rocket measurements of energetic particles in the midlatitude precipitation zone

Measurements of energetic ion and electron properties as a function of altitude in the midlatitude zone of nighttime energetic particle precipitation are reported. The measurements of particle fluxes, energy spectra and pitch angle distributions were obtained by a Langmuir probe, six energetic particle spectrometers and an electrostatic analyzer on board a Nike Apache rocket launched near the center of the midlatitude zone during disturbed conditions. It is found that the incident flux was primarily absorbed rather than backscattered, and consists of mainly energetic hydrogen together with some helium and a small energetic electron component. Observed differential energy spectra of protons having an exponential energy spectrum, and pitch angle distributions at various altitudes indicate that the energetic particle flux decreases rapidly for pitch angles less than 70 deg. An energetic particle energy flux of 0.002 ergs/sq cm per sec is calculated which indicates the significance of energetic particles as a primary nighttime ionization source for altitudes between 120 and 200 km in the midlatitude precipitation zone.

Voss, H. D.↗
NASA NTRS1981

Compatibility of alternative fuels with advanced automotive gas turbine and stirling engines. A literature survey

The application of alternative fuels in advanced automotive gas turbine and Stirling engines is discussed on the basis of a literature survey. These alternative engines are briefly described, and the aspects that will influence fuel selection are identified. Fuel properties and combustion properties are discussed, with consideration given to advanced materials and components. Alternative fuels from petroleum, coal, oil shale, alcohol, and hydrogen are discussed, and some background is given about the origin and production of these fuels. Fuel requirements for automotive gas turbine and Stirling engines are developed, and the need for certain reseach efforts is discussed. Future research efforts planned at Lewis are described.

Cairelli, J.↗
NASA NTRS1982

The far-infrared disk of M51

Far-infrared maps and multifrequency photometry are presented for M51 and its companion galaxy NGC 5195. Dust reradiates about half the starlight of the M51 + NGC 5195 system to produce the observed far-infrared (80-200 microns) luminosity of 3 x 10 to the 10th solar luminosities. Observed with 49-arcsec resolution and covering 37 arcmin-squared, the maps show that roughly 70% of this luminosity is produced by the 5 arcmin (approximately 15 kpc) wide far-infrared disk of M51. Comparable luminosities emitted from the central regions (diameters = 49 arcsec or 2.3 kpc) of M51 and NGC 5195 contribute the remaining 30% (approximately 1 x 10 to the 10th solar luminosities). The photometry reveals a difference in energetics at the galactic scale; dust producing the central luminosity of NGC 5195 classified as Ip-Ep, Irr II or SBa(r) is much less abundant and considerably warmer than the approximately 20 K dust producing the central luminosity of M51 (Sc I). Far-infrared properties are given for several galactic scale complexes of star formation in M51. Relationships are discussed for selected maps of optical starlight and emissions from these components of M51's interstellar medium: dust grains, CO molecules, hydrogen atoms, electrons, and H II regions.

Smith, J.↗
NASA NTRS1984

The electron density in M82 from the S III mid-infrared line ratio

Strong detections have been made of both the 18.7 microns and 33.4 microns lines of S III in the irregular galaxy M82. This represents the first detection of the 33.4 microns line in an extragalactic object. These measurements sample the ionized gas component which dominates the observed infrared forbidden line and infrared hydrogen recombination line emission. From the ratio of the line fluxes an electron density of 120 (+ 280, - 120) per cu cm is deduced. This result is in agreement with previous estimates of the density derived from high-frequency radio continuum measurements and an assumed emitting volume. They impose further constraints on possible starburst models.

Houck, J. R.↗
NASA NTRS1990

The chemical effects of the Martian environment on power system component materials: A theoretical approach

In the foreseeable future, an expedition may be undertaken to explore the planet Mars. Some of the power source options being considered for such a mission are photovoltaics, regenerative fuel cells and nuclear reactors. In addition to electrical power requirements, environmental conditions en route to Mars, in the planetary orbit and on the Martian surface must be simulated and studied in order to anticipate and solve potential problems. Space power systems components such as photovoltaic arrays, radiators, and solar concentrators may be vulnerable to degradation in the Martian environment. Natural characteristics of Mars which may pose a threat to surface power systems include high velocity winds, dust, ultraviolet radiation, large daily variation in temperature, reaction to components of the soil, atmosphere and atmospheric condensates as well as synergistic combinations. Most of the current knowledge of the characteristics of the Martian atmosphere and soil composition was obtained from the Viking 1 and 2 missions in 1976. A theoretical study is presented which was used to assess the effects of the Martian atmospheric conditions on the power systems components. A computer program written at NASA-Lewis for combustion research that uses a free energy minimization technique was used to calculate chemical equilibrium for assigned thermodynamic states of temperature and pressure. The power system component materials selected for this study include: silicon dioxide, silicon, carbon, copper, and titanium. Combinations of environments and materials considered include: (1) Mars atmosphere with power surface material, (2) Mars atmosphere and dust component with power surface material, and (3) Mars atmosphere and hydrogen peroxide or superoxide or superoxide with power system material. The chemical equilibrium calculations were performed at a composition ratio (oxidant to reactant) of 100. The temperature for the silicon dioxide material and silicon, which simulate photovoltaic cells, were 300 and 400 K; for carbon, copper and titanium, which simulate radiator surfaces, 300, 500, and 1000 K. All of the systems were evaluated at pressures of 700, 800, and 900 Pa, which stimulate the Martian atmosphere.

Perez-Davis, Marla E.↗
NASA NTRS1992

Explosion of a supernova with a red giant companion

Two-dimensional numerical simulations of the collision between spherical ejecta from a supernova and a red giant companion are presented. In contrast to previous numerical studies, in which the companion was a main-sequence star or a compact object, the collision consequences are found to have a dramatic impact upon the red giant. In most cases the red giant companion loses most of its envelope in a time scale of 10 exp 7 s with typical velocities about an order of magnitude less than those of the expanding velocity of the supernova shell. We confirm the conclusion of Chugai (1986) that the stripped hydrogen tends to come off as a low-velocity component interior to the supernova ejecta. Possible observational consequences of the results are discussed.

Livne, E.↗
NASA NTRS1993

The millimeter-wave spectrum of CaH (X 2Sigma(+))

The millimeter-wave spectrum of the CaH and CaD radicals (X 2Sigma(+)) has been observed in the laboratory via direct absorption spectroscopy. The species were generated by the reaction of calcium vapor, produced in a Broida-type oven, with hydrogen atoms created in a microwave discharge. The six hyperfine components of the N = 0 yields 1 rotational transition of CaH near 254 GHz were resolved and their frequencies determined to an accuracy of +/- 100 kHz. The main hyperfine lines originating in the N = 0 yields 1, 1 yields 2, and 2 yields 3 rotational transitions of CaD were also detected. Spectroscopic constants were determined for both radicals from a nonlinear least squares fit to the data, using a 2Sigma Hamiltonian. These measurements constitute the first laboratory observation of CaH at high spectral resolution, and are essential to the detection of this radical in interstellar space.

Barclay, W. L., Jr.↗
NASA NTRS1996

Mars global surveyor

The design and performance of a highly reliable, 20 volt nickel hydrogen battery compatible with existing NiCad Mars observer based spacecraft components and an 800 psi, zirconium wall wick Common Pressure Vessel (CPV) are discussed. The objectives of the design process are: to meet or exceed all PD requirements by using existing technologies; to have high reliability hardware and parallel fabrication of components; and low schedule risk configurations. This paper discusses the tests performed on the batteries (capacity, charge retention, random vib., pyro shock, energy density, and packing factor) and the results of the tests. In addition to the design discussion, a brief introduction on Mars Global Surveyor (MGS) Satellite objectives (NASA's next interplanetary mission) is also presented.

Source record↗
NASA NTRS2012

Polyurea-Based Aerogel Monoliths and Composites

aerogel insulation material was developed that will provide superior thermal insulation and inherent radiation protection for government and commercial applications. The rubbery polyureabased aerogel exhibits little dustiness, good flexibility and toughness, and durability typical of the parent polyurea polymer, yet with the low density and superior insulation properties associated with aerogels. The thermal conductivity values of polyurea-based aerogels at lower temperature under vacuum pressures are very low and better than that of silica aerogels. Flexible, rubbery polyurea-based aerogels are able to overcome the weak and brittle nature of conventional inorganic and organic aerogels, including polyisocyanurate aerogels, which are generally prepared with the one similar component to polyurethane rubber aerogels. Additionally, with higher content of hydrogen in their structures, the polyurea rubber-based aerogels will also provide inherently better radiation protection than those of inorganic and carbon aerogels. The aerogel materials also demonstrate good hydrophobicity due to their hydrocarbon molecular structure. There are several strategies to overcoming the drawbacks associated with the weakness and brittleness of silica aerogels. Development of the flexible fiber-reinforced silica aerogel composite blanket has proven to be one promising approach, providing a conveniently fielded form factor that is relatively robust in industrial environments compared to silica aerogel monoliths. However, the flexible, silica aerogel composites still have a brittle, dusty character that may be undesirable, or even intolerable, in certain application environments. Although the cross - linked organic aerogels, such as resorcinol- formaldehyde (RF), polyisocyanurate, and cellulose aerogels, show very high impact strength, they are also very brittle with little elongation (i.e., less rubbery). Also, silica and carbon aerogels are less efficient radiation shielding materials due to their lower content of hydrogen element. The invention involves mixing at least one isocyanate resin in solvent along with a specific amount of at least one polyamine hardener. The hardener is selected from a group of polyoxyalkyleneamines, amine-based polyols, or a mixture thereof. Mixing is performed in the presence of a catalyst and reinforcing inorganic and/or organic materials, and the system is then subjected to gelation, aging, and supercritical drying. The aerogels will offer exceptional flexibility, excellent thermal and physical properties, and good hydrophobicity. The rubbery polyurea-based aerogels are very flexible with no dust and hydrophobic organics that demonstrated the following ranges of typical properties: densities of 0.08 to 0.293 g/cu cm, shrinkage factor (raerogel/rtarget) = 1.6 to 2.84, and thermal conductivity values of 15.2 to 20.3 mW/m K.

Lee, Je Kyun↗
NASA NTRS2017

LOX/Methane In-Space Propulsion Systems Technology Status and Gaps

Human exploration architecture studies have identified liquid oxygen (LOX)Methane (LCH4) as a strong candidate for both interplanetary and descent ascent propulsion solutions. Significant research efforts into methane propulsion have been conducted for over 50 years, ranging from fundamental combustion mixing efforts to rocket chamber and system level demonstrations. Over the past 15 years NASA and its partners have built upon these early activities that have demonstrated practical components and sub-systems needed to field future methane space transportation elements. These advanced development efforts have formed a foundation of LOXLCH4 propulsion knowledge that has significantly reduced the development risks of future methane based space transportation elements for human exploration beyond earth orbit. As a bipropellant propulsion system, LOXLCH4 has some favorable characteristics for long life and reusability, which are critical to lunar and Mars missions. Non-toxic, non-corrosive, self-venting, and simple to purge. No extensive decontamination process required as with toxic propellants. High vapor pressure provides for excellent vacuum ignition characteristics. Performance is better than current earth storable propellants for human scale spacecraft. Provides the capability for future Mars exploration missions to use propellants that are produced in-situ on Mars Liquid Methane is thermally similar to O2 as a cryogenic propellant, 90,111 K (LO2, LCH4 respectively) instead of the 23 K of LH2. Allows for common components and thus providing cost savings as compared to liquid hydrogen (LH2). Due to liquid methane having a 6x higher density than hydrogen, it can be stored in much smaller volumes. Cryogenic storage aspect of these propellants needs to be addressed. Passive techniques using shielding and orientations to deep space Refrigeration may be required to maintain both oxygen and methane in liquid forms

Propulsion systems↗
NASA NTRS2017

NASA's Space Launch System Gains Momentum Toward Integration and Testing

NASA's Space Launch System (SLS) entered a new phase in 2017, completing major structural manufacturing on the core stage and delivering the first flight hardware to NASA's Kennedy Space Center (KSC). The program is now transitioning to integration, assembly and testing in preparation for launch readiness in late 2019. Core stage prime contractor Boeing concluded welding of the major core stage components for Exploration Mission 1 (EM-1) with the liquid hydrogen flight tank, following completion of the engine section, liquid oxygen tank, and forward skirt. Technicians also completed assembly of the bolted intertank, and all sections are currently in hardware integration. The engine section structural test article was shipped to NASA's Marshall Space Flight Center (MSFC) and began testing in 2017. The core stage pathfinder shipped to NASA's Michoud Assembly Facility (MAF). Booster prime contractor Orbital ATK made significant progress casting motor segments for SLS, with several segments finishing processing and in storage. Forward and aft sections of the boosters are being refurbished at KSC. RS-25 prime contractor Aerojet Rocketdyne completed SLS adaptation testing and qualification of four new EM-1 controllers. The four EM-1 engines are ready and waiting for shipment from NASA's Stennis Space Center (SSC) to Michoud Assembly Facility (MAF) for core stage integration in preparation for green run testing at SSC. The EM-1 Interim Cryogenic Propulsion System (ICPS) became the first major piece of SLS to arrive at KSC. Welding is complete on the EM-1 Launch Vehicle Stage Adapter (LVSA) and the flight Orion Stage Adapter (OSA). SLS is critical to U.S. leadership in future human and robotic space exploration, including a presence on the moon in preparation for missions deeper into space. This paper will elaborate on 2017 SLS progress and progress envisioned for 2018.

Askins, Bruce R.↗
DOE OSTI2024

High temperature thermochemical energy storage materials

Disclosed are high enthalpy thermochemical energy storage materials that exhibit high thermal conductivity and stability at high temperature reaction conditions. Disclosed materials include hydride-based alloys that can undergo high temperature reversible hydrogenation/dehydrogenation reactions without phase change of any metal or metalloid components of the alloy. The materials undergo a reversible exothermic hydrogenation reaction to form a metal hydride and a ternary alloy that includes a high thermal conductivity metal that, in its pure state, would exhibit a phase change at the hydrogenation reaction conditions.

Ward, Patrick A.↗