Search NASA⌕ Search

SEARCH · Search NASA

Results for “identification problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Bi-cross validation of spectral clustering hyperparameters

One challenge impeding the analysis of terabyte scale X-ray scattering data from the Linac Coherent Light Source (LCLS) is determining the number of clusters required for the execution of traditional clustering algorithms. Here, we demonstrate that the previous work using bi-cross validation to determine the number of singular vectors directly maps to the spectral clustering problem of estimating both the number of clusters and hyperparameter values. Here by applying this method to LCLS X-ray scattering data enables the identification of dropped shots without manually setting boundaries on detector fluence and provides a path toward identifying rare and anomalous events.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Critical Assessment of Photoionization Efficiency Measurements for Characterization of Soot-Precursor Species

We present a critical evaluation of photoionization efficiency (PIE) measurements coupled with aerosol mass spectrometry for the identification of condensed soot-precursor species extracted from a premixed atmospheric-pressure ethylene/oxygen/nitrogen flame. Definitive identification of isomers by any means is complicated by the large number of potential isomers at masses likely to comprise particles at flame temperatures. This problem is compounded using PIE measurements by the similarity in ionization energies and PIE-curve shapes among many of these isomers. Nevertheless, PIE analysis can provide important chemical information. For example, our PIE curves show that neither pyrene nor fluoranthene alone can describe the signal from C 16 H 10 isomers and that coronene alone cannot describe the PIE signal from C 24 H 12 species. A linear combination of the reference PIE curves for pyrene and fluoranthene yields good agreement with flame-PIE curves measured at 202 u, which is consistent with pyrene and fluoranthene being the two major C 16 H 10 isomers in the flame samples, but does not provide definite proof. The suggested ratio between fluoranthene and pyrene depends on the sampling conditions. We calculated the values of the adiabatic-ionization energy (AIE) of 24 C 16 H 10 isomers. Despite the small number of isomers considered, the calculations show that the differences in AIEs between several of the isomers can be smaller than the average thermal energy at room temperature. The calculations also show that PIE analysis can sometimes be used to separate hydrocarbon species into those that contain mainly aromatic rings and those that contain significant aliphatic content for species sizes investigated in this study. Our calculations suggest an inverse relationship between AIE and the number of aromatic rings. We have demonstrated that further characterization of precursors can be facilitated by measurements that test species volatility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Risk Management Techniques and Practice Workshop Workshop Report

At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

99 GENERAL AND MISCELLANEOUS↗

Electron Emission Spectroscopy of III-N Semiconductor Devices

Gallium nitride (GaN) has proven to be a semiconductor material system that is ideal for the development of lasers and light-emitting diodes (LEDs) with emission wavelengths spanning the visible spectrum. In particular, the prevalence of white LEDs has been made possible by pairing GaN-based optoelectronic devices emitting at 450 nm (blue) with phosphors for down-conversion. The efficiency of these devices, although better than alternatives, is limited at high current densities (efficiency droop), elevated temperatures (thermal droop) and is markedly worse at longer wavelengths. Understanding the physical origins of these efficiency problems can provide a pathway for engineering solutions to these long-standing issues. Despite extensive efforts to improve and understand these limitations, the unambiguous identification of these efficiency loss mechanisms has remained an open topic of research. Most studies of the efficiency loss mechanisms in GaN LEDs rely on an indirect measurement of carrier dynamics by analysis of the emitted light. The inadequacy of these indirect measurements has motivated the development of an electron spectroscopy technique, capable of directly probing several electron transport and recombination mechanisms in GaN-based optoelectronic devices. In 2013, electron emission spectroscopy (EES) was used for the first time to measure high energy electrons generated via Auger recombination in the active region of an LED. This result brought an end to the longstanding controversy over the causes for efficiency droop at high carrier densities. Our analysis of the kinetic energy of vacuum emitted electrons from GaN-based LEDs xiii has unambiguously identified carrier overshoot as the dominant mechanism responsible for thermal droop. Control experiments from p-n diodes show evidence for a previously unknown hot carrier generating process, likely trap-assisted Auger recombination (TAAR) occurring in AlGaN/GaN barrier heterostrucutres. We also discuss the possibility of TAAR occurring in InGaN quantum wells through examination of low-efficiency LEDs grown by molecular beam epitaxy. Finally, we discuss preliminary EES results regarding long wavelength GaN LEDs as well as the first EES measurements from semipolar ($20\bar2\bar1$) GaN LEDs and p-n diodes.

light emitting diodes, solid state lighting↗

Compositional modeling in porous media using constant volume flash and flux computation without the need for phase identification

The paper deals with the numerical solution of a compositional model describing compressible two-phase flow of a mixture composed of several components in porous media with species transfer between the phases. The mathematical model is formulated by means of the extended Darcy's laws for all phases, components continuity equations, constitutive relations, and appropriate initial and boundary conditions. The splitting of components among the phases is described using a new formulation of the local thermodynamic equilibrium which uses volume, temperature, and moles as specification variables. The problem is solved numerically using a combination of the mixed-hybrid finite element method for the total flux discretization and the finite volume method for the discretization of transport equations. A new approach to numerical flux approximation is proposed, which does not require the phase identification and determination of correspondence between the phases on adjacent elements. The time discretization is carried out by the backward Euler method. The resulting large system of nonlinear algebraic equations is solved by the Newton–Raphson iterative method. We provide eight examples of different complexity to show reliability and robustness of our approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aggregation and data driven identification of building thermal dynamic model and unmeasured disturbance

An aggregate model is a single-zone equivalent of a multi-zone building, and is useful for many purposes, including model based control of large heating, ventilation and air conditioning (HVAC) equipment. This paper deals with the problem of simultaneously identifying an aggregate thermal dynamic model and unknown disturbances from input–output data of multi-zone buildings. The unknown disturbance is a key challenge since it is not measurable but non-negligible. In this paper, we first present a principled method to aggregate a multi-zone building model into a single zone model, and show the aggregation is not as trivial as it has been assumed in the prior art. We then provide a method to identify the parameters of the model and the unknown disturbance for this aggregate (single-zone) model. Finally, we test our proposed identification algorithm to data collected from a multi-zone building testbed in Oak Ridge National Laboratory. A key insight provided by the aggregation method allows us to recognize under what conditions the estimation of the disturbance signal will be necessarily poor and uncertain, even in the case of a specially designed test in which the disturbances affecting each zone are known (as the case of our experimental testbed). This insight is used to provide a heuristic that can be used to assess when the identification results are likely to have high or low accuracy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The high energy X-ray probe (HEX-P): Galactic PeVatrons, star clusters, superbubbles, microquasar jets, and gamma-ray binaries

HEX-P is a probe-class mission concept that will combine high spatial resolution X-ray imaging (<10" FWHM) and broad spectral coverage (0.2–80 keV) with an effective area far superior to current facilities (including XMM-Newton and NuSTAR) to enable revolutionary new insights into a variety of important astrophysical problems. With the recent discoveries of over 40 ultra-high-energy gamma-ray sources (detected above 100 TeV) and neutrino emission in the Galactic Plane, we have entered a new era of multi-messenger astrophysics facing the exciting reality of Galactic PeVatrons. In the next decade, as more Galactic PeVatrons and TeV gamma-ray sources are expected to be discovered, the identification of their acceleration and emission mechanisms will be the most pressing issue in both particle and high-energy astrophysics. In this paper, along with its companion papers, we will present that HEX-P is uniquely suited to address important problems in various cosmic-ray accelerators, including Galactic PeVatrons, through investigating synchrotron X-ray emission of TeV–PeV electrons produced by both leptonic and hadronic processes. For Galactic PeVatron candidates and other TeV gamma-ray sources, HEX-P can fill in a large gap in the spectral-energy distributions (SEDs) of many objects observed in radio, soft X-rays, and gamma rays, constraining the maximum energies to which electrons can be accelerated, with implications for the nature of the Galactic PeVatrons and their contributions to the spectrum of Galactic cosmic rays beyond the knee at ~3 PeV. In particular, X-ray observation with HEX-P and TeV observation with CTAO will provide the most powerful multi-messenger diagnostics to identify Galactic PeVatrons and explore a variety of astrophysical shock mechanisms. We present simulations of each class of Galactic TeV–PeV sources, demonstrating the power of both the imaging and spectral capabilities of HEX-P to advance our knowledge of Galactic cosmic-ray accelerators. In addition, we discuss HEX-P’s unique and complementary roles to upcoming gamma-ray and neutrino observatories in the 2030s.

79 ASTRONOMY AND ASTROPHYSICS↗

The high energy X-ray probe (HEX-P): Galactic PeVatrons, star clusters, superbubbles, microquasar jets, and gamma-ray binaries

HEX-P is a probe-class mission concept that will combine high spatial resolution X-ray imaging (<10" FWHM) and broad spectral coverage (0.2–80 keV) with an effective area far superior to current facilities (including XMM-Newton and NuSTAR) to enable revolutionary new insights into a variety of important astrophysical problems. With the recent discoveries of over 40 ultra-high-energy gamma-ray sources (detected above 100 TeV) and neutrino emission in the Galactic Plane, we have entered a new era of multi-messenger astrophysics facing the exciting reality of Galactic PeVatrons. In the next decade, as more Galactic PeVatrons and TeV gamma-ray sources are expected to be discovered, the identification of their acceleration and emission mechanisms will be the most pressing issue in both particle and high-energy astrophysics. In this paper, along with its companion papers, we will present that HEX-P is uniquely suited to address important problems in various cosmic-ray accelerators, including Galactic PeVatrons, through investigating synchrotron X-ray emission of TeV–PeV electrons produced by both leptonic and hadronic processes. For Galactic PeVatron candidates and other TeV gamma-ray sources, HEX-P can fill in a large gap in the spectral-energy distributions (SEDs) of many objects observed in radio, soft X-rays, and gamma rays, constraining the maximum energies to which electrons can be accelerated, with implications for the nature of the Galactic PeVatrons and their contributions to the spectrum of Galactic cosmic rays beyond the knee at ~3 PeV. In particular, X-ray observation with HEX-P and TeV observation with CTAO will provide the most powerful multi-messenger diagnostics to identify Galactic PeVatrons and explore a variety of astrophysical shock mechanisms. We present simulations of each class of Galactic TeV–PeV sources, demonstrating the power of both the imaging and spectral capabilities of HEX-P to advance our knowledge of Galactic cosmic-ray accelerators. In addition, we discuss HEX-P’s unique and complementary roles to upcoming gamma-ray and neutrino observatories in the 2030s.

79 ASTRONOMY AND ASTROPHYSICS↗

First Results of $\nu_e$ Appearance Analysis and Electron Neutrino Identification at NOvA

NOvA is a long-baseline accelerator-based neutrino oscillation experiment that is optimized for $\nu_\mu\to\nu_e$ measurements. It uses the upgraded NuMI beam from Fermilab and measures electron-neutrino appearance and muon-neutrino disappearance at its Far Detector in Ash River, Minnesota. The $\nu_e$ appearance analysis at NOvA aims to resolve the neutrino mass hierarchy problem and to constrain the CP-violating phase. The first data set of $2.74\times10^{20}$ protons on target (POT) equivalent exposure taken by NOvA has been analyzed. The first measurement of electron-neutrino appearance in NOvA provides solid evidence of $\nu_\mu\to\nu_e$ oscillation with the NuMI beam line. Electron-neutrino identification is the key ingredient for the $\nu_e$ appearance analysis. The electron-identification algorithm used to produce the primary results presented here compares 3-D shower-energy profiles with Monte Carlo prototypes to construct likelihoods for each particle hypothesis. Particle likelihoods, among other event-topology variables, are used as inputs to an Artificial Neural Network for the final electron-neutrino identification. The design and implementation of this algorithm is also presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deep reinforcement learning for class imbalance fault diagnosis of equipment in nuclear power plants

In equipment fault diagnosis in nuclear power plants, there may be far more samples in one class (e.g., a health state) than in another class (e.g., a fault state). The distribution of data in each class is highly skewed. Most machine learning algorithms are suitable for balanced training datasets. When faced with imbalanced samples, these algorithms tend to provide good identification for the majority classes and bias for the minority classes. However, the misclassification of minority classes can lead to high costs. To address the above problem, this paper develops a deep reinforcement learning-based diagnosis method that models fault diagnosis as a sequential decision-making process. At each time step, the agent receives the state of the environment represented by the training samples and then takes a diagnosis action guided by a policy. If the action is correct/incorrect, the agent receives a positive/negative reward. The reward for minority classes is higher than that for majority classes. The agent’s goal is to obtain as many cumulative rewards as possible in the process, i.e., to identify the sample as correctly as possible. Six demonstration scenarios are constructed, depending on the selected fault datasets and the designed model structures. Experiments show that the proposed method achieves a higher weighted-averaged F1 score than the classical supervised learning method in most cases of class imbalance. Finally, the proposed method has potential applications in the field of class imbalance fault diagnosis of equipment in nuclear power plants.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Identifying Transient Candidates in the Dark Energy Survey Using Convolutional Neural Networks

The ability to discover new transient candidates via image differencing without direct human intervention is an important task in observational astronomy. For these kind of image classification problems, machine learning techniques such as Convolutional Neural Networks (CNNs) have shown remarkable success. In this work, we present the results of an automated transient candidate identification on images with CNNs for an extant data set from the Dark Energy Survey Supernova program, whose main focus was on using Type Ia supernovae for cosmology. By performing an architecture search of CNNs, we identify networks that efficiently select non-artifacts (e.g., supernovae, variable stars, AGN, etc.) from artifacts (image defects, mis-subtractions, etc.), achieving the efficiency of previous work performed with random Forests, without the need to expend any effort in feature identification. The CNNs also help us identify a subset of mislabeled images. Performing a relabeling of the images in this subset, the resulting classification with CNNs is significantly better than previous results, lowering the false positive rate by 27% at a fixed missed detection rate of 0.05.

79 ASTRONOMY AND ASTROPHYSICS↗

Dalitz Plot Analysis of B{sup -{yields}}D{sup +{pi}-{pi}-}

We present a Dalitz plot analysis of B{sup -{yields}}D{sup +{pi}-{pi}-} decays, based on a sample of about 383 million {Upsilon}(4S){yields}BB-bar decays collected by the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. The analysis has been published previously in [1]. We measure the inclusive branching fraction of the three-body decay to be B(B{sup -{yields}}D{sup +{pi}+{pi}-}) = (1.08{+-}0.03(stat){+-}0.05(syst))x10{sup -3}. We observe the established D{sub 2}*{sup 0} and confirm the existence of D{sub 0}*{sup 0} in their decays to D{sup +{pi}-}, where the D{sub 2}*{sup 0} and D{sub 0}*{sup 0} are the 2{sup +} and 0{sup +} cu-bar P-wave states, respectively. We measure the masses and widths of D{sub 2}*{sup 0} and {Gamma}D{sub 0}*{sup 0} to be: mD{sub 2}* = (2460.4{+-}1.2{+-}1.2{+-}1.9) MeV/c{sup 2}, {Gamma}D{sub 2}* = (41.8{+-}2.5{+-}2.1{+-}2.0) MeV, mD{sub 0}* = (2297{+-}8{+-}5{+-}19) MeV/c{sup 2}, {Gamma}D{sub 0}* = (273{+-}12{+-}17{+-}45) MeV. The stated errors reflect the statistical and systematic uncertainties, and the uncertainty related to the assumed composition of signal events and the theoretical model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Metal artifact reduction in x-ray computed tomography (CT) by constrained optimization

Purpose: The streak artifacts caused by metal implants have long been recognized as a problem that limits various applications of CT imaging. In this work, the authors propose an iterative metal artifact reduction algorithm based on constrained optimization. Methods: After the shape and location of metal objects in the image domain is determined automatically by the binary metal identification algorithm and the segmentation of ''metal shadows'' in projection domain is done, constrained optimization is used for image reconstruction. It minimizes a predefined function that reflects a priori knowledge of the image, subject to the constraint that the estimated projection data are within a specified tolerance of the available metal-shadow-excluded projection data, with image non-negativity enforced. The minimization problem is solved through the alternation of projection-onto-convex-sets and the steepest gradient descent of the objective function. The constrained optimization algorithm is evaluated with a penalized smoothness objective. Results: The study shows that the proposed method is capable of significantly reducing metal artifacts, suppressing noise, and improving soft-tissue visibility. It outperforms the FBP-type methods and ART and EM methods and yields artifacts-free images. Conclusions: Constrained optimization is an effective way to deal with CT reconstruction with embedded metal objects. Although the method is presented in the context of metal artifacts, it is applicable to general ''missing data'' image reconstruction problems.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Excited state baryon spectroscopy from lattice QCD

Here, we present a calculation of the Nucleon and Delta excited state spectrum on dynamical anisotropic clover lattices. A method for operator construction is introduced that allows for the reliable identification of the continuum spins of baryon states, overcoming the reduced symmetry of the cubic lattice. Using this method, we are able to determine a spectrum of single-particle states for spins up to and including $J = 7/2$, of both parities, the first time this has been achieved in a lattice calculation. We find a spectrum of states identifiable as admixtures of $SU(6) Ⓧ O(3)$ representations and a counting of levels that is consistent with the non-relativistic $qqq$ constituent quark model. This dense spectrum is incompatible with quark-diquark model solutions to the "missing resonance problem" and shows no signs of parity doubling of states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Genomic Island Identification Software v 1.0

Genomic islands are key mobile DNA elements in bacterial evolution, that can distinguish pathogenic strains from each other, or distinguish pathogenic strains from non-pathogenic strains. Their detection in genomes is a challenging problem. We present 3 main software components that attack the island detection problem on two different bases: 1) the preference of islands to insert in chromosomal tRNA or tmRNA genes (islander.pl), and 2) islands' sporadic occurrence among closely related strains. The latter principle is employed in both an algorithm (learnedPhyloblocks.pl) and a visualization method (panGenome.pl). Component islander.pl finds islands based on their preference for a particular target gene type. We annotate each tRNA and tmRNA gene, find fragments of each such gene as candidates for the distal ends of islands, and filter candidates to remove false positives. Component learnedPhyloblocks.pl uses islands found by islander.pl and other methods as a training set to find new islands. Reference genomes are aligned using mugsy, then the "phylotypes" or patterns of occurrence in the reference set are determined for each position in the target genome, and those phylotypes most enriched in the training set of islands are followed to detect yet more islands. Component panGenome.pl produces a big-data visualization of the chromosomally-ordered "pan-genome", that includes every gene of every reference genome (x-axis, pan-genome order; y-axis, reference genomes; color-coding, gene presence/absence etc.), islands appearing as dark patches.

Williams, KellyPorter↗

Genomic Island Identification Software v 1.0

Genomic islands are key mobile DNA elements in bacterial evolution, that can distinguish pathogenic strains from each other, or distinguish pathogenic strains from non-pathogenic strains. Their detection in genomes is a challenging problem. We present 3 main software components that attack the island detection problem on two different bases: 1) the preference of islands to insert in chromosomal tRNA or tmRNA genes (islander.pl), and 2) islands' sporadic occurrence among closely related strains. The latter principle is employed in both an algorithm (learnedPhyloblocks.pl) and a visualization method (panGenome.pl). Component islander.pl finds islands based on their preference for a particular target gene type. We annotate each tRNA and tmRNA gene, find fragments of each such gene as candidates for the distal ends of islands, and filter candidates to remove false positives. Component learnedPhyloblocks.pl uses islands found by islander.pl and other methods as a training set to find new islands. Reference genomes are aligned using mugsy, then the "phylotypes" or patterns of occurrence in the reference set are determined for each position in the target genome, and those phylotypes most enriched in the training set of islands are followed to detect yet more islands. Component panGenome.pl produces a big-data visualization of the chromosomally-ordered "pan-genome", that includes every gene of every reference genome (x-axis, pan-genome order; y-axis, reference genomes; color-coding, gene presence/absence etc.), islands appearing as dark patches.

Source record↗

Relativistic MR-MP energy levels: Low-lying states in the Mg isoelectronic sequence

The relativistic Multi-Reference Møller–Plesset (MR-MP) many-body perturbation theory was applied to calculate the energies of all excited states within the 3s3p, 3p{sup 2}, 3s3d, 3p3d and 3d{sup 2} configurations for every ion of the Mg isoelectronic sequence (Z=12−100). The results are compared with previous calculations and available experimental data. The MR-MP excitation energies agree with experiment typically within 100 ppm over a wide range of Z, particularly for mid- and high-range Z. Experimental data for highly charged ions in this isoelectronic sequence are limited and the complete and accurate dataset presented here is expected to ease the identification process upon measurements.

74 ATOMIC AND MOLECULAR PHYSICS↗

Toroidal regularization of the guiding center Lagrangian

In the Lagrangian theory of guiding center motion, an effective magnetic field B* = B+ (m/e)v ∥ ∇ x b appears prominently in the equations of motion. Because the parallel component of this field can vanish, there is a range of parallel velocities where the Lagrangian guiding center equations of motion are either ill-defined or very badly behaved. Moreover, the velocity dependence of B* greatly complicates the identification of canonical variables and therefore the formulation of symplectic integrators for guiding center dynamics. Here, this letter introduces a simple coordinate transformation that alleviates both these problems simultaneously. In the new coordinates, the Liouville volume element is equal to the toroidal contravariant component of the magnetic field. Consequently, the large-velocity singularity is completely eliminated. Moreover, passing from the new coordinate system to canonical coordinates is extremely simple, even if the magnetic field is devoid of flux surfaces. We demonstrate the utility of this approach in regularizing the guiding center Lagrangian by presenting a new and stable one-step variational integrator for guiding centers moving in arbitrary time-dependent electromagnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗