Search NASA⌕ Search

SEARCH · Search NASA

Results for “imaging spectrometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Xplo-SA9T: Optimization of Sorbent Technology With Existing and New Amine Variants for Carbon Dioxide Removal and Humidity Control

Scrubbing of the spacesuit air stream to control humidity and regulate carbon dioxide (CO 2 ) relies on amine-loaded resins, colloquially known as sorbents. The efficacy of Rapid Cycle Amine technology relies on the propensity of nitrogens toward adsorption of CO 2 while simultaneously offering regenerative properties under vacuum or positive pressure. The commonly utilized sorbent, SA9T, was recreated and evaluated further to increase stability and serve as a benchmark comparison for newly synthesized amine sorbent technologies. Ongoing storage studies with eight different environments will allow the development of applicable storage protocols and provide insight into possible ammonia generation pathways. Attempts to alleviate the known issues with SA9T included the alteration of the primary amine (tetraethylenepentamine), the choice of resin, and the particle size distribution. In-house CO 2 breakthrough experiments were conducted using a specialized apparatus that can simulate spacesuit conditions, offering high-quality triplicate capacity analysis affording direct comparison to known adsorbents in the literature. Thermo-Desorption Gas Chromatography Mass Spectrometry studies on the synthesized materials revealed any reagent or solvent offgassing while Nuclear Magnetic Resonance spectroscopy tracked the stability of the bound amine. Scanning Electron Microscope images of sieved materials provided a more accurate size interpretation facilitating synthetic design and pressure drop elimination. All efficient sorbents were synthesized to a commercial batch scale subsequent to evaluation including Xplo-SA9T.

John R Tidwell↗
DOE OSTI2025

Enhanced Spatial Proteomics and Metabolomics from a Single Tissue Section Using MALDI-MSI and LCM-microPOTS Platforms

Spatially resolved mass spectrometry (MS)-based multi-omics workflows are becoming more utilized for revealing the complex biology that occurs within tissues. However, these approaches commonly require multiple independent tissue sections to analyze the metabolite and protein compositions of these samples. This poses a significant challenge in preserving cell- or region-specific molecular fidelity, as variations between tissue sections can compromise the accurate correlation of molecular data. Here, in this study, we developed workflows for comprehensive multi-omics profiling from a single tissue section (STS) using different MS modalities. We enhanced the functionality of an electrically insulated substrate by employing metal-assisted approaches that enabled both MS-based untargeted spatial metabolomics and proteomics from STS. This allowed metabolite imaging using matrix-assisted laser desorption/ionization-MS imaging (MALDI-MSI), without compromising it for subsequent proteome profiling with laser capture microdissection (LCM)-based technology. Specifically, implementing copper tape as a backing for polyethylene naphthalate (PEN) slides enabled the detection of >140 metabolites across a poplar root tissue section using MALDI-trapped ion mobility spectrometry time of flight (timsTOF)-MS. Afterwards, we detected 6,571 unique proteins from two distinct root regions by leveraging LCM technology coupled to our microdroplet based sample preparation approach. We also developed an alternative workflow utilizing gold-coated PEN substrates for imaging with MALDI-Fourier-transform ion cyclotron resonance (FTICR)-MS, which permitted the profiling of >170 metabolites and the identification of 6,542 unique proteins across a single poplar root tissue section. These results were comparable to using each assay independently without modifications. These approaches offer new opportunities for high-resolution molecular profiling of multiple omics-levels across biological tissues.

Veličković, Marija [Pacific Northwest National Lab↗
DOE OSTI2025

Spectroscopic and Computational Studies of Spin-Orbit Coupling of Lanthanide Oxides

Spin-orbit (SO) coupling makes it possible for spin forbidden transitions or reactions within non-relativistic quantum theory feasible. Thus, quantification of such interactions has important implications in photophysics and chemical catalysis. This work aims to quantify SO interactions using lanthanide (Ln) oxides as target molecular systems. Through these systems, we examine the impact on the SO coupling by electron configurations and 4f orbital occupancies of Ln elements and sizes of the metal oxides. By examining these factors, we explore how SO coupling is affected by the number of Ln 4f electrons for a given size of molecules and if the Ln 4f orbitals remain atomic in nature in these small clusters. Ln oxides are produced in laser ablation molecular beams, identified with time-of-fight mass spectrometry, and characterized with laser spectroscopy and relativistic quantum chemical computations. Spectroscopic measurements include mass-analyzed threshold ionization (MATI), zero electron kinetic energy, and slow electron velocity-map imaging spectroscopies. Relativistic computations treat scalar relativistic corrections, electron correlations, and SO interactions. The main results are SO terms and energies of the neutral molecules and singly charged cations, ionization energies of the neutral species, metal-metal and metal-oxygen vibrational frequencies of the ions and, in some cases, neutrals as well, and charge effects on the bonding and structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparison of PID Shunting in Polycrystalline and Single-Crystal Silicon Modules via Multi-Scale, Multi-Technique Characterization

We used the methods we reported last year to investigate potential-induced degradation (PID). We have now applied these methods to single-crystalline silicon modules that have degraded during field deployment, as well as in minimodules stressed in the laboratory. We will compare these results to the polycrystalline results presented last year. Small cores have been removed from the modules and subjected to analysis. We use a combination of photoluminescence and dark lock-in thermography imaging, laser marking, electron-beam induced current measurements, and subsequent focused ion-beam marking to allow analysis of individual defects via time-of-flight secondary-ion mass spectrometry (TOF-SIMS) to investigate the root-cause mechanism for PID shunting. We see a direct correlation between recombination active shunts and sodium content. The sodium content in shunted areas peaks at the SiN/Si interface and is consistently observed at a concentration of 0.1%-1% in shunted areas. TOF-SIMS data taken on degraded and non-degraded single-crystalline sample areas show a similar trend as in the polycrystalline samples: more sodium is seen in the degraded areas.

14 SOLAR ENERGY↗
NASA NTRS2016

Chromophores from photolyzed ammonia reacting with acetylene: Application to Jupiters Great Red Spot

The high altitude of Jupiter's Great Red Spot (GRS) may enhance the upward flux of gaseous ammonia (NH3 ) into the high troposphere, where NH3 molecules can be photodissociated and initiate a chain of chemical reactions with downwelling acetylene molecules (C2H2 ). These reactions, experimentally studied earlier by (Ferris and Ishikawa [1987] Nature 326, 777-778) and (Ferris and Ishikawa [1988] J. Amer. Chem. Soc. 110, 4306-4312), produce chromophores that absorb in the visible and ultraviolet regions. In this work we photolyzed mixtures of NH3 and C2H2 using ultraviolet radiation with a wavelength of 214 nm and measured the spectral transmission of the deposited films in the visible region (400-740 nm). From these transmission data we estimated the imaginary indices of refraction. Assuming that ammonia grains at the top of the GRS clouds are coated with this material, we performed layered sphere and radiative transfer calculations to predict GRS reflection spectra. Comparison of those results with observed and previously unreported Cassini visible spectra and with true-color images of the GRS show that the unknown GRS chromophore is spectrally consistent with the coupled NH3-C2H2 photochemical products produced in our laboratory experiments. Using high-resolution mass spectrometry and infrared spectroscopy we infer that the chromophore-containing residue is composed of aliphatic azine, azo, and diazo compounds.

Jupiter↗
DOE OSTI2021

Composition and Structure of Fluorescent Graphene Quantum Dots Generated by Enzymatic Degradation of Graphene Oxide

The broad applications of carbon nanomaterials (CNMs) in both materials and life sciences necessitate investigation of their metabolites due to the inevitable contact of CNMs and biological systems. Graphene oxide (GO), along with other types of CNMs, can be enzymatically degraded by myeloperoxidase (MPO), an enzyme released during the innate immune response. However, the enzymatic degradation products are neither well-defined nor well-understood. Some products generated during MPO-catalyzed degradation of GO could emit blue photoluminescence (PL) and were simply dubbed graphene quantum dots (GQDs) without further elucidating their structures. In this work, we use liquid chromatography-mass spectrometry (LC-MS) to isolate and elucidate chemical structures of the MPO-catalyzed degradation products. A general chemical formula screening workflow was developed for the GQDs, which are in the form of polyaromatic hydrocarbons (PAHs), obtained in the degradation products. Structures of the PAHs responsible for the blue PL were further proposed using density functional theory (DFT) calculations. Our results indicated that structures with several conjugated benzene rings are likely to generate the observed PL. This work provides insights into the mechanism of enzymatic degradation and open opportunities for fluorescence imaging of GO in biological systems.

composition and structure screening↗
DOE OSTI2026

Haze processing of atmospheric particles during wintertime in the Indo-Gangetic Plains

The impacts of haze on visibility, air quality, and climate are not well quantified due to a lack of understanding of the evolution of the mixing state and phase state of atmospheric particles during haze processing. The variability of the mixing state of atmospheric particles contributes significantly to uncertainties associated with the estimated aerosol radiative forcing. We collected particle samples in January 2018 from the highly polluted Indo-Gangetic plain during hazy conditions to study haze-processed particles. Single particle analysis using multi-modal micro-spectroscopy techniques revealed an abundance (40–70% by number) of potassium-rich sulfate particles from biomass-burning influenced smoke. Tilted view imaging showed that most of the organic particles that had inorganic potassium and sulfate inclusions were liquid-like while those without inclusions were more semi-solid. High-resolution mass spectrometry analysis revealed a significant presence of organosulfates and nitroxy-organosulfates in the morning samples (24%) compared to the afternoon samples (9%), despite higher relative humidity in the afternoon. Overall, our results highlight the significant contribution of both organic and inorganic sulfate to the total particulate sulfur budget during haze processing in winter, when anthropogenic emissions such as household burning, agricultural burning, and vehicular emissions are major contributors to particle mass.

Mathai, Susan [Pacific Northwest National Laborato↗
DOE OSTI2022

Effects of Au2+ irradiation induced damage in a high-entropy pyrochlore oxide single crystal

Here, we report an ion-irradiation study of a compositionally complex (high-entropy) pyrochlore oxide. The damage produced from 4 MeV Au 2+ ion irradiation on single crystal (Yb 0.2 Tm 0.2 Lu 0.2 Ho 0.2 Er 0.2 ) 2 Ti 2 O 7 aligned along the [100] direction is investigated at room temperature by Rutherford backscattering spectrometry in channeling mode (RBS/C). Damage profiles based on RBS/C are presented and compared to single-component pyrochlore titanate oxides to evaluate the relative resistance to irradiation-induced amorphization. The results show that this high-entropy pyrochlore goes amorphous at a dose of 0.13 dpa, which is comparable to that of single-component pyrochlores previously studied. Transmission electron microscopy images unveil the damaged surface layer, which is consistent with the RBS/C results.

36 MATERIALS SCIENCE↗
DOE OSTI2026

spammR: an R package designed for analysis and integration of spatial multi-omic measurements

Spatial omics is a young and evolving field and as such shows rapid development of novel technologies and analysis methods to measure transcripts, proteins, metabolites, and post-translational modifications at high spatial resolution. These advances in technology have enabled the simultaneous generation of abundance profiles for multiple different omics types and associated microscopy imaging data, as well as their analysis in a spatial context. However, most analytical tools are designed for spatial transcriptomics platforms and are challenging to use in other contexts such as mass spectrometry-based measurements or metagenomics. To this end we present spammR (spatial analysis of multi-omics measurements in R), an R package that enables end-to-end analysis with a specific focus on mass-spectrometry derived spatial omics datasets with (1) smaller sample sizes and spatial sparsity of samples, (2) considerable missingness, and (3) no a-priori knowledge about proteins or genes of interest, relying on a fully data-driven approach.

spammR↗
NASA NTRS1981

Spectrometry of Jupiter at selected locations on the disk during the 1979 apparition

Jupiter's reflectivity was measured as a function of wavelength between 3000 and 10,500 Angstrom for two nights during the 1979 apparition. The spectra obtained were used to calibrate the wavelength response of Voyager images and to establish differences from previous apparitions. The observations were taken in the prominent belts and zones and both polar caps along the central meridian using a slit of dimensions 2.33 x 2.5 sq arcsec. The equivalent widths of the 6190 and 7270 Angstrom CH4 bands were measured; compared to the 1976 apparition, there was significantly less CH4 absorption in the north tropical zone. Such equivalent-width decreases are said to result from either a reduction in particle albedo or a decrease in the scattering mean free path owing to a greater concentration of aerosol particles in the NTrZ.

Cochran, A. L.↗
DOE OSTI2022

Direct Multimodal Nanoscale Visualization of Early Phosphorus-Based Antiwear Tribofilm Formation

Understanding the mechanism of antiwear (AW) tribofilm formation and how to tune surface chemistry to control functionality is essential for the development of the next generation of oil lubricants. In particular, understanding and optimizing early AW tribofilm formation can increase the energy efficiency of mechanical systems. However, the mechanism for how these films form is not well understood. The majority of prior work has focused on analyzing only end-of-test surfaces long after the film has formed. In this work, we develop an in situ multimodal chemical imaging methodology to directly visualize the early formation of AW films on steel surfaces. We investigate an oil formulation containing a phosphorus-based additive commonly used to protect surfaces from wear and fatigue processes in machine elements, such as gears, bearings, and sliding contacts. Using nanoscale multimodal chemical imaging on combined platforms of atomic force microscopy (AFM) coupled directly with in situ nano-infrared (nano-IR) spectroscopy, and further combined ex situ with time-of-flight secondary ion mass spectrometry (ToF-SIMS), we demonstrate a direct correlation between changes in friction and local surface chemistry. In these experiments, the AFM probe acts as a single asperity contact to generate the tribofilm as well as a tool to analyze it in situ as it is forming. To verify our in situ measurements, we compare these results to the ex situ ToF-SIMS of macroscale block-on-ring tribometer-formed samples. We report the understanding gained here on how AW films form and how film properties can be modified by tuning the chemistry of the additives will facilitate developing transmission fluids to meet increasing demands for vehicle performance and efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Integrating Flow Imaging Analysis and Single-Particle ICP-TOFMS for Comprehensive Micro- and Nanoplastic Characterization

Flow imaging analysis (FIA), provides composition-agnostic morphological characterization. These measurements of particle size and shape are valuable to mass-based analysis, such as single particle inductively coupled plasma time-of-flight mass spectrometry (sp-ICP-TOFMS), which provides quantitative data on elements within particles. Using these two methods together enables informed use of geometric assumptions required by sp-ICP-TOFMS, as particle mass is typically converted to a particle diameter using assumed-spherical geometry. To validate this concept, parallel measurements to determine particle diameters were performed by FIA and sp-ICP-TOFMS on four particle suspensions: 300 nm polystyrene Eu-doped nanoparticles, 1 μm Fe-rich beads, 3 μm four element calibration polystyrene beads and 5 μm polystyrene beads. The Fe-particles obtained the highest percent difference from the manufacturer’s nominal diameter, as the mean diameter obtained by FIA was overestimated by 21% and sp-ICP-TOFMS underestimated the mean diameter by 20.7%. Two types of particles were selected to test the effect of varying the particle number concentrations (PNC) on sizing accuracy, and both methods accurately sized each particle population at the PNC expected. Single particle analysis of carbon has continued to be a popular research topic, with direct applications to environmental pollutants in terms of nano- and micro- plastics. Real-world plastic particles were studied, and FIA’s measured circularity values demonstrated that the particles deviated from spherical geometries, therefore sp-ICP-TOFMS data should be interpreted as mass-based rather than size-based. Combining these techniques enables improved interpretation of particle populations and evaluation of particle sizes.

Szakas, Sarah [ORNL] (ORCID:0000000241332197)↗
NASA NTRS2013

Coordinated Analyses of Antarctic Sediments as Mars Analog Materials Using Reflectance Spectroscopy and Current Flight-Like Instruments for CheMin, SAM and MOMA

Coordinated analyses of mineralogy and chemistry of sediments from the Antarctic Dry Valleys illustrate how data obtained using flight-ready technology of current NASA and ESA missions can be combined for greater understanding of the samples. Mineralogy was measured by X-ray diffraction (XRD) and visible/ near-infrared (VNIR) reflectance spectroscopy. Chemical analyses utilized a quadrupole mass spectrometer (QMS) to perform pyrolysis-evolved gas analysis (EGA) and gas chromatography-mass spectrometry (GC/MS) both with and without derivatization, as well as laser desorption-mass spectrometry (LD/MS) techniques. These analyses are designed to demonstrate some of the capabilities of near-term landed Mars missions, to provide ground truthing of VNIR reflectance data acquired from orbit by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on MRO and to provide detection limits for surface- operated instruments: the Chemistry and Mineralogy (CheMin) and Sample Analysis at Mars (SAM) instrument suites onboard Mars Science Laboratory (MSL) and the Mars Organic Molecule Analyzer (MOMA) onboard ExoMars-2018. The new data from this study are compared with previous analyses of the sediments performed with other techniques. Tremolite was found in the oxic region samples for the first time using the CheMin-like XRD instrument. The NIR spectral features of tremolite are consistent with those observed in these samples. Although the tremolite bands are weak in spectra of these samples, spectral features near 2.32 and 2.39 micrometers could be detected by CRISM if tremolite is present on the martian surface. Allophane was found to be a good match to weak NIR features at 1.37-1.41, 1.92, and 2.19 micrometers in spectra of the oxic region sediments and is a common component of immature volcanic soils. Biogenic methane was found to be associated with calcite in the oxic region samples by the SAM/EGA instrument and a phosphoric acid derivative was found in the anoxic region sample using the SAM/MTBSTFA technique.

Mars↗
DOE OSTI2021

Multiscale Characterization of Photovoltaic Modules—Case Studies of Contact and Interconnect Degradation

The current popularity of photovoltaic (PV) systems is due in large part to their exceptional reliability and significantly lower cost than other energy sources. Studying cell and module degradation is key to promote further development in the state of the art. Fielded or accelerated aged modules exhibit different failure modes, of which metallization degradation (contacts and interconnections) is prevalent. In this work, we discuss how multiscale characterization methods can be applied to a variety of module technologies that have been field exposed and have undergone accelerated age testing. These methods include performing characterization on the module level, cell level, and finally the materials level. The observed performance losses from the module- and cell-level characterization can be correlated with materials properties to find out the root cause of degradation. We recommend an initial nondestructive characterization suite, including module- and cell-level current-voltage ( I--V ), Suns-V OC , photoluminescence and electroluminescence imaging, quantum efficiency, ultraviolet fluorescence imaging, and thermal infrared imaging. Samples are then extracted from particularly degraded regions of the module and prepared for materials characterization techniques, such as top-down and cross-sectional scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, Raman spectroscopy, and transmission electron microscopy, allowing a deeper look into the mechanism behind the metallization degradation. This article serves as an instructional review to introduce the different multiscale characterization methods and how they can be effectively applied to perform PV degradation studies. Furthermore, we also share some of our examples and discuss the strengths, limitations, and best practices for each of the characterization techniques.

14 SOLAR ENERGY↗
NASA NTRSDate not supplied

Low-Temperature Production of Cosmic Grains Analogs From Gas-Phase Molecular Precursors with the NASA Ames' COSmIC Facility

Complex carbon molecules and ions are ubiquitous in space and form the building blocks of carbonaceous cosmic dust grains, ultimately contributing to the formation of planets. Here, we report the first experimental investigations of the low temperature chemical pathways leading to the production of cosmic grain analogs from gas phase molecular precursors in order to better understand the evolution of cosmic carbon. The experiments were performed using the COsmic SImulation Chamber (COSmIC) to generate and characterize grains formed from gas phase precursors under controlled conditions representative of astrophysical environments [1]. Using COSmIC, it is possible to investigate the evolution of cosmic carbon from the formation of neutral and ionized gas phase hydrocarbons and PAHs [2], to carbon grains [3, 4]. This is achieved by using a discharge nozzle to (1) produce an adiabatic jet expansion and cool down Ar-hydrocarbon/PAH gas mixtures to astrophysically relevant temperature (150 K) before inducing chemistry by generating a plasma discharge in the stream of the expansion. This plasma-induced chemistry results in the formation of complex molecules and solid particles, analogs of cosmic grains. Solid grains are produced in-situ in the plasma expansion, carried by the accelerated gas in the expansion, and collected on substrates placed a few centimeters downstream of the electrodes. The results of a preliminary solid phase ex-situ analysis of cosmic grain analogs produced at low temperature in COSmIC from gas mixtures including molecular precursors of cosmic carbon grains, i.e., such as CH4 and C2H2 found in circumstellar ejecta of late C stars [3] as well as PAHs ubiquitously detected in IR emission bands seen in galactic and extragalactic environments [4] will be discussed. Scanning Electron Microscopy imaging was used to provide insight on the morphology and growth structure of the grains produced in COSmIC, and to investigate how the precursors used to produce the grains affect these parameters [3]. Laser desorption mass spectrometry was used to identify the molecules making up the main structures within the condensed grains [4]. NIR to FIR optical properties are characterized to provide critical information (functional groups, optical constants) to the scientific community, for use in radiative transfer models in particular, and to help decipher and enhance the return data from space observations.

F. Salama↗
DOE OSTI2021

Evidence of lithium mobility under neutron irradiation

Understanding the evolution of intermetallic materials in high-radiation environments is of great importance for fusion science and national security. Tritium ( 3 H) and lithium ( 6 Li, 7 Li) transport within neutron irradiated claddings coated with aluminide (FeAl3) has been investigated using state-of-the-art multimodal imaging. Specifically, scanning electron microscopy – focused ion beam (SEM-FIB) was used to prepare irradiated coating lift-out samples for follow-on microanalysis. Here, scanning transmission electron microscopy (STEM) was used to acquire atomic-scale information on the carbonaceous structure and elemental mapping. Atomic force microscopy (AFM) was used to determine lift-out dimensions nondestructively. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectral and depth profiling show unexpected lithium isotopic distributions in the irradiated cladding, raising an important evidence of possible light isotope mobility within the cladding under elevated temperature and irradiation. ToF-SIMS three-dimensional chemical mappings of mid- and bottom-cladding coatings show light isotopic (e.g., 3 H, 6 Li, 7 Li) distributions in the irradiated coating and give new insights into the fundamental mechanism related to transport mechanisms within the cladding. Multimodal imaging is power to link microstructure, chemistry, and nanoscale defects that impact reliability of these materials. Furthermore, chemical mapping offers observations of the microstructural evolution due to irradiation and provides insights into unexpected material transport under extreme conditions.

36 MATERIALS SCIENCE↗