Search NASA⌕ Search

SEARCH · Search NASA

Results for “impression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Facile integration of low-cost black phosphorus in solution-processed organic solar cells with improved fill factor and device efficiency

Black phosphorus (BP) as a promising two-dimensional (2D) material has gained great attention in nanoelectronic devices because of its intrinsic semiconductor characteristics. However, the poor material availability and solution processability have been major roadblocks that hinder its wider application in microelectronics. Herein, readily available, lost-cost BP was utilized as an effective component that was integrated via a facile solution process for the fabrication of bulk heterojunction organic solar cells (OSCs). An impressive fill factor (FF) of 74.2% and power conversion efficiency (PCE) of 10.5% were realized in the OSCs incorporating 10 wt% of BP in the active layer of the benchmark polymer donor PTB7-Th and PC71BM acceptor, corresponding to a 20% PCE enhancement compared to the BP-free binary devices. The efficiency enhancement can be attributed to BP's high hole carrier mobility that facilitates better carrier extraction and suppression of the recombination. BP has been further demonstrated to be effective in additional solar cells based on other photovoltaic (PV) materials, including non-fullerene OSCs. The successful incorporation of the inexpensive BP in the solution-based fabrication of OSCs opens the door for its application in high performance, low cost flexible electronics.

14 SOLAR ENERGY↗
DOE OSTI2019

Ultradispersed W x C nanoparticles enable fast polysulfide interconversion for high-performance Li-S batteries

Li-S batteries are a promising next-generation battery technology but are confronted with a series of fundamental challenges, in particular the notorious shuttle effect of soluble polysulfide intermediates. Current research efforts are mostly focused on designing proper host materials for the entrapment and immobilization of polysulfides. Herein, we demonstrate that electrocatalysis may play an unexpected role in Li-S batteries. Nanosized tungsten carbide particles dispersed on the carbonaceous support are prepared from the pyrolysis of phosphotungstic acid-functionalized metal-organic frameworks. Both experimental measurements and theoretical calculations demonstrate that they not only have strong affinity toward polysulfide intermediates, but also significantly accelerate the reduction of low-order polysulfides that is otherwise kinetically challenged. Furthermore, using these supported tungsten carbide nanoparticles as the cathode catalyst, our Li-S batteries achieve large capacity, excellent cycling stability and impressive rate capability.

25 ENERGY STORAGE↗
DOE OSTI2019

Surface-engineered mesoporous silicon microparticles as high-Coulombic-efficiency anodes for lithium-ion batteries

High-capacity silicon anodes suffer from rapid capacity decay due to large volume expansion, which causes mechanical fracture, electrical contact loss and unstable solid electrolyte interphase (SEI). Nanostructuring has proved to be effective in addressing these problems over the past decade; however, new issues such as poor initial Coulombic efficiencies due to increased surface area remain unsolved. Here we develop a surface-engineering strategy by depositing a dense silicon skin onto each mesoporous silicon microparticle and further encapsulating it with a conformal graphene cage, which improves both the initial and later-cycle Coulombic efficiencies. The silicon skin lowers the unfavorable electrolyte/electrode contact area and minimizes SEI formation, resulting in an initial Coulombic efficiency over twice as high as that without silicon skin coating. Furthermore, the graphene cage combined with the inner void space of mesoporous silicon allow for silicon expansion, which guarantees structural integrity and SEI stability, resulting in high later-cycle Coulombic efficiencies (99.8–100% for later cycles) and impressive cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2019

Insights into enhanced sodium ion storage mechanism in Fe 3 S 4 : The coupling of surface chemistry, microstructural regulation and 3D electronic transport

Sodium ion batteries (SIBs) are considered a potential energy storage technology due to their low cost and the abundance of sodium resources. Numerous strategies have been made to address the remaining challenges such as low electronic conductivity, huge volume change, and sluggish sodium ions kinetics. In spite of impressive advances, a comprehensive understanding of the microstructure-stability correlation remains elusive. Here, the three-dimensional (3D) Fe 3 S 4 flower-like hierarchical materials constructed from two-dimensional (2D) nanosheet building units were synthesized via a facile and cost-effective method. Instead of materials synthesis and performance evaluation, more attentions have been paid on the underlying coupling mechanism between microstructure design, surface chemistry and 3D electronic/ionic transport pathways. It found that the thin and stable SEI layer generated by ether-based electrolytes contributes to the stable surface chemistry and fast interfacial Na + ion transport, while 3D hierarchical structure enables short diffusion distance, volume change accomodation as well as stabilizing SEI layer. Taking advantage of the inherent high electronic conductivity in Fe 3 S 4 , we have demonstrated the paramount importance of the synergistic strategy to improve the stability of SIBs through X-ray nanotomography. In conclusion, this work explicitly illuminate the electrochemical stability mechanisms of 3D hierarchitectures and resolves new strategies to rational design SIBs anodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

The porous carbon blacks rationally designed by a facile yet efficient NH 3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g -1 at 50 mA g -1 and a superior rate capability of 101 mAh g -1 at 16000 mA g -1 , due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g -1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g -1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. In conclusion, this system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synergy of carbonyl and azo chemistries for wide-temperature-range rechargeable aluminum organic batteries

Rechargeable aluminum organic batteries (RAOBs) are promising for developing cost-effective and sustainable energy storage devices due to the low cost, abundance, and high sustainability of aluminum and organic resources. In this study, we designed and synthesized a redox-active polymer bearing carbonyl and azo groups as a cathode material for RAOBs. The polymeric cathode exhibits a high reversible specific capacity, superior cyclic stability, fast charging capability, and a wide operation temperature range (₋40°C to 100°C). X-ray photoelectron spectroscopy (XPS), pair distribution function (PDF) analysis, and soft X-ray absorption near edge structure (XANES) were employed to gain fundamental insight into the carbonyl and azo chemistries in RAOBs, as well as the cathode electrolyte interphase (CEI) structure. We demonstrated a step-by-step alumination/de-alumination reaction for carbonyl and azo groups in the polymer cathode and unraveled a Al 2 O 3⁻ and AlN-rich CEI, which is critical for the impressive performance of RAOBs.

25 ENERGY STORAGE↗
DOE OSTI2025

From oversimplified to overlooked: The case for exploring rich dark sectors

The Standard Model (SM) of particle physics provides a very successful description of fundamental particles and their interactions but it is incomplete, as neutrino masses, dark matter and the baryon asymmetry of the Universe indicate. In addition, the origin of masses and of the approximate fundamental symmetries call out for deeper explanations. The quest for a New SM Theory, that extends the SM to a more general theory, is ongoing. For decades the main focus has been on the TeV scale, but despite an impressive theoretical and experimental effort, no hints of new physics at such scale has been found in experiments. Dark sectors provide an interesting alternative to TeV scale extensions of the SM to explain the open questions in particle and astroparticle physics. Going beyond minimal models, rich dark sectors extend the SM to a complex theory with multiple particles and interactions, in analogy to the SM itself. They have a wealth of theoretical and astrophysical/cosmological consequences and can lead to phenomenological signatures that can be markedly different to that of minimal ones. These include short-lived particles and semi-visible decay signatures, as opposed to minimal models where new states are typically long-lived and purely visible or invisible resonances. Given the experimental configurations and analysis strategies, current dark sector searches might miss such signatures. We advocate a dedicated programme of searches for rich dark sectors that overcomes the assumptions on minimality and on the long lifetime of particles and encompasses a broader range of possibilities. Here, we discuss a prototype model that includes a complex structure akin to the SM: multiple generations of fermions charged under a new spontaneously-broken gauge symmetry.

Dark matter↗
DOE OSTI2023

Public perceptions of wave energy development on the west coast of North America: Risks, benefits, and coastal attachment

While solar and wind energy continue to grow as significant sources of renewable energy, a global energy transition away from fossil fuels will require an expanding portfolio of generating resources. Marine renewable energy has the potential to contribute greatly in the coming decades, as the more predictable nature of wave energy can support the resiliency of the power grid and complement solar and inland wind generation. Yet, the broad deployment of marine energy technologies like wave energy will depend on public support, making it critical to identify the relevant factors associated with public attitudes and risk/benefit perceptions. This paper draws on social representations theory to specifically examine perceptions of wave energy on the west coast of North America, a site chosen because of the high suitability for wave energy generation and the fact that one of only three wave energy test sites in the world is under development off the coast of Oregon. Using an online survey in June 2020, we recruited a sample of 2000 respondents from California, Oregon, Washington, and British Columbia. We found a majority of respondents held positive attitudes to wave energy, but respondents also had low familiarity – with a quarter of respondents lacking sufficient information to form an opinion. We used logistic regression to identify factors correlated with wave energy attitudes, finding that respondents who were more supportive of wind and solar energy, more optimistic about new technology, and reported more familiarity with wave energy were significantly more likely to have a positive impression of wave energy. Respondents with higher levels of place attachment to coastal areas were more split, as they perceived higher benefits of wave energy – but also higher risks. Our results indicate broad appeal of wave energy on the west coast, but we caution policymakers and developers to not take initial siting processes for granted. As experience has shown for offshore wind, broad appeal does not guarantee a smooth siting process in a local context. Furthermore, the role of place attachment to coastal areas must be taken seriously or risk alienating local communities.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Deep inverse photonic design: A tutorial

Deep learning (DL) has been used to design deep neural networks (DNNs) which have recently been applied to solving inverse problems in artificial electromagnetic materials (AEMs). Although inverse problems are often ill-posed, and therefore are difficult to solve, deep inverse models (DIMs) have achieved impressive results often surpassing capabilities possible with other approaches. We overview the process of deep inverse learning applied to AEM problems, including the building of data sets, design of a forward model, and comparison of inverse approaches including limitations. We conclude by detailing some important outstanding issues of deep inverse design of AEMs, and present an outlook of this exciting field.

42 ENGINEERING↗
DOE OSTI2024

Assessing observational constraints on dark energy

Observational constraints on time-varying dark energy (e.g., quintessence) are commonly presented on a w 0 –w a plot that assumes the equation of state of dark energy strictly satisfies w(z) = w 0 + w a z/(1 + z) as a function of the redshift z. Recent observations favor a sector of the w 0 –w a plane in which w 0 > –1 and w 0 + w a < –1, suggesting that the equation of state underwent a transition from violating the null energy condition (NEC) at large z to obeying it at small z. In this paper, we demonstrate that this impression is misleading by showing that simple quintessence models satisfying the NEC for all z predict an observational preference for the same sector. We also find that quintessence models that best fit observational data can predict a value for the dark energy equation of state at present that is significantly different from the best-fit value of w 0 obtained assuming the parameterization above. In addition, the analysis reveals an approximate degeneracy of the w 0 –w a parameterization that explains the eccentricity and orientation of the likelihood contours presented in recent observational studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Reactor physics characterization of triply periodic minimal surface-based nuclear fuel lattices

Triply periodic minimal surface (TPMS) lattices are receiving substantial attention in numerous engineering fields due to their impressive topology-driven physical characteristics. TPMS lattices are periodic structures of two distinct intertwined volume domains separated by an area-minimizing surface or wall. TPMS lattices have been observed in nature, such as biological membranes, skeletons, block copolymers, sea urchins, butterfly wings, and equipotential surfaces in crystals. Intriguingly, the topology of TPMS lattices can be easily parametrized via level-set equations and thus are heavily numerically and experimentally studied. Here, a significant research effort is currently applying TPMS lattices for heat exchangers and sinks. This paper extends TPMS lattice applications to nuclear reactor fuel designs, with a focus on identifying relevant TPMS geometric parameters controlling neutronics characteristics, such as reactivity, neutron spectrum, and heat removal properties. We found that fuel surface-area-to-volume ratios for TPMS lattices can be two orders of magnitude larger than current cylindrical fuel rods. Further, the selected TPMS lattice and its implicit equation, the unit cell pitch, wall thickness, and structure porosity are design parameters enabling neutronics optimization for both thermal and fast spectrum configurations, paving the way for exceptionally compact and dense nuclear core concepts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Fluorinated polythiophenes with ester side chains for boosting the V OC and efficiency in non-fullerene polymer solar cells

As the power conversion efficiency (PCE) of organic photovoltaics (OPVs) approximates the 19 % threshold, wide bandgap (WBG) polythiophenes (PTs) have gained increasing attention due to their simple chemical structures and ease of synthesis, making them promising candidates for large-scale production. However, the benchmark polymer poly(3-hexylthiophene) (P3HT) is limited by its high-lying HOMO energy level, which restricts the open-circuit voltage (V OC ) in solar cells. Here, in this study, we introduce a novel series of PT derivatives (PDC8-T, PDC8-3T, PDC16-3T, and PDC16-3T-2F) featuring ester side chains designed to fine-tune electronic properties through a streamlined three-step synthesis. Additionally, we incorporated a π-spacer to reduce steric hindrance and elongated alkyl side chains to improve solubility and processability. Compared to P3HT, these PT derivatives demonstrate a significant reduction in HOMO energy levels, lowering by approximately 0.3–0.4 eV. Among them, PDC16-3T-2F—with fluorine atom substitution—achieves the lowest HOMO energy level, induces a coplanar molecular conformation, and enhances polymer aggregation behavior. We evaluated these PT derivatives in inverted non-fullerene bulk-heterojunction (NFA BHJ) OPVs. The PDC8-3T device showed a relatively low PCE of 0.69 %, with a V OC of 0.76 V, a short-circuit current density (J SC ) of 3.32 mA/cm 2 , and a fill factor (FF) of 27.3 %. In contrast, the PDC16-3T-2F device achieved an impressive PCE of 7.21 %, with a V OC of 0.85 V, a J SC of 14.60 mA/cm 2 , and an FF of 58.4 %. This remarkable improvement is attributed to the fluorine substitution, which not only enhances molecular orientation but also downshifts the HOMO energy level and further boosts the V OC . Hence, these molecular design strategies have led to a fibrillar bicontinuous interpenetrating network with optimal nanoscale phase separation within the active layer.

14 SOLAR ENERGY↗
DOE OSTI2024

Minimizing grid energy consumption in wastewater treatment plants: Towards green energy solutions, water sustainability, and cleaner environment

Wastewater treatment plants (WWTPs) consume significant amount of energy to sustain their operation. From this point, the current study aims to enhance the capacity of these facilities to meet their energy needs by integrating renewable energy sources. The study focused on the investigation of two primary solar energy systems in As Samra WWTP in Jordan. The first system combines parabolic trough collectors (PTCs) with thermal energy storage (TES). This system primarily serves to fulfill the thermal energy demands of the plant by reducing the demands from boiler units, which allows more biogas for electricity generation. The second system is a photovoltaic (PV) system with Lithium-Ion batteries, which directly produces electricity that will be used to cover part of the electrical energy demands of plant. To assess the optimal configuration, two distinct scenarios have been formulated and compared to the current case scenario (SC#1). The first scenario focuses on maximizing the net present value (NPV) and minimizing the levelized cost of electricity (LCOE). The second scenario is centred on minimizing the levelized cost of heat (LCOH). The findings indicate that both scenarios succeeded in reducing the reliance on the grid to a value that reach 1 %. Moreover, they both reduced biogas percentage in energy production from 88 % to approximately 65 % through the integration of the PV system. In terms of thermal demand, SC#2 reduced the reliance on biogas boiler units from 100 % to 25 %, while SC#3 achieved an even more impressive reduction to just 8 %. The best LCOE value was attained in SC#2, at 0.0895 USD/kWh, with an NPV of 10.54 million USD. Conversely, SC# 3 yielded an LCOH value of 0.0432 USD/kWh th compared to 0.0534 USD/kWh th USD for SC#2. In conclusion, despite their relatively high capital and operating costs, SC#2 and SC#3 managed to substantially decrease the annual electricity expenditure from approximately 2 million USD to 86,000 USD and 0 USD, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Developing aqueous solubilizing agents as an alternative to solvent extraction

Here, advancing separations science is important for the entire field of chemistry. One partitioning technique that would benefit from improvement is solvent extraction. Despite its effective and widespread use, the method suffers from some problems: generation of flammable organic waste, lengthy process times, and safety concerns associated with contacting organic solvents with acidic aqueous solutions. We developed an alternative separation method inspired by solvent extraction that side-steps those issues. Toward this end, we identified that the functionality of an extractant (an agent used in solvent extraction to pull analytes from the aqueous phase into the organic phase) would change if it was modified for water solubility. In this alternative scenario, the extractant transforms into an “aqueous solubilizing agent.” We discovered that adding this aqueous solubilizing agent alongside a precipitating agent caused the contaminants to precipitate, but not the analyte. This separation concept was demonstrated within the bounds of one of the most difficult partitioning problems, separating minor actinides (Am 3+ ) from lanthanides (Ln 3+ ). We discovered that the (HSO 3 Ph) 4 BTP (aq) aqueous solubilizing agent prevented Am 3+ (aq) from precipitating with Ln 3+ (aq) when f-element precipitating agents (NaF (aq) or HF (aq) ) were added. This separation boasts impressive Am 3+ (aq) recovery yield (90 ± 2 %), near quantitative Ln 3+ (aq) removal, and high separation factors [>3000, Am 3+ (aq) vs. Nd 3+ (aq) ]. It seems likely – given the large number of candidate extractants that could be modified for aqueous solubility and the numerous combinations of existing solubilizing and precipitating agents – that this alternative approach could be used broadly in place of solvent extraction and solve other important separation problems.

(HSO3Ph)4BTP(aq)↗
DOE OSTI2019

Use of indentation to study the degradation of photovoltaic backsheets

The ability of electrical insulating materials within a module to act as insulators is a key safety requirement for photovoltaic (PV) technology. Presently, however, the durability of backsheets may not be readily assessed. For example, the mechanical tensile test continues to be developed, and its use has not been validated such that a technically based pass/fail criteria may be established. This study examines the use of simple indentation methods, including durometer hardness and instrumented indentation, as a means to quantitively assess the degradation of PV backsheets. Characteristics including: hardness, modulus, load/displacement profile, creep hold response, and residual impression are explored in an empirical study. Glass/encapsulant/backsheet mini-modules constructed using backsheets including: polyamide (PA), poly(ethylene terephthalate) (PET), polyvinyl fluoride (PVF) laminate ('TPE'), and polyvinylidene fluoride (PVDF) were examined. An M-type durometer as well as Berkovich and cube-corner tips were used in the indentation experiments. Additional characterizations were performed to interpret the indentation measurements including: surface roughness measurements using atomic force microscopy (AFM), a chemical integrity study using Fourier-transform infrared spectroscopy (FTIR), and phase-transition measurements using differential scanning calorimetry (DSC). The results are analyzed in the context of the combined accelerated stress test (C-AST) also explored in this study. Instrumented indentation (i.e., using a Berkovich tip) was able to distinguish between backsheets and quantify the effects of accelerated testing (including up to 60%, 25%, and 20% change in hardness, modulus, and creep displacement, respectively). The embrittlement of the backsheets was not readily assessable using cube-corner indentation. Cracking of the known-bad polyamide backsheet was observed from the C-AST, which was not observed to result from steady state UV weathering.

14 SOLAR ENERGY↗
DOE OSTI2016

Sinomenine attenuates renal fibrosis through Nrf2-mediated inhibition of oxidative stress and TGFβ signaling

Renal fibrosis is the common feature of chronic kidney disease and mainly mediated by TGFβ-associated pro-fibrogenic signaling, which causes excessive extracellular matrix accumulation and successive loss of kidney functions. Sinomenine (SIN), an alkaloid derived from medicinal herb extensively used in treatment of rheumatoid arthritis and various inflammatory disorders, displays renal protective properties in experimental animals; however its pharmacological potency against renal fibrosis is not explored. In this study we report that SIN possesses strong anti-renal fibrosis functions in kidney cell and in mouse fibrotic kidney. SIN beneficially modulated the pro-fibrogenic protein expression in TGFβ-treated kidney cells and attenuated the renal fibrotic pathogenesis incurred by unilateral ureteral obstruction (UUO), which correlated with its activation of Nrf2 signaling - the key defender against oxidative stress with anti-fibrotic potentials. Further investigation on its regulation of Nrf2 downstream events revealed that SIN significantly balanced oxidative stress via improving the expression and activity of anti-oxidant and detoxifying enzymes, and interrupted the pro-fibrogenic signaling of TGFβ/Smad and Wnt/β-catenin. Even more impressively SIN achieved its anti-fibrotic activities in an Nrf2-dependent manner, suggesting that SIN regulation of Nrf2-associated anti-fibrotic activities constitutes a critical component of SIN's renoprotective functions. Collectively our studies have demonstrated a novel anti-fibrotic property of SIN and its upstream events and provided a molecular basis for SIN's potential applications in treatment of renal fibrosis-associated kidney disorders. - Highlights: • Sinomenine has strong potency of inhibiting renal fibrosis in UUO mouse kidney. • Sinomenine attenuates the expression of profibrogenic proteins. • Sinomenine balances renal fibrosis-associated oxidative stress. • Sinomenine mitigates profibrogenic signaling of TGBβ/Smad and Wnt/β-catenin. • Sinomenine exerts anti-renal fibrotic functions mainly via activating Nrf2 pathways.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Disruption of adenosine 2A receptor improves the anti-tumor function of anti-mesothelin CAR T cells both in vitro and in vivo

Chimeric antigen receptor (CAR) T cells have been successfully used for the treatment of hematological malignancies including acute and chronic lymphoblastic leukemia. However, results of CAR T cell projects in solid tumors have been less impressive to date, partly because of immunosuppressive tumor microenvironment (TME). It is widely known that high adenosine production is an important factor causing tumor-induced immunosuppression in TME, and adenosine mediates the suppression of anti-tumor T cell responses via binding and signaling through adenosine 2a receptor (A2aR). Previous studies have shown that adenosine generated by cancer cells significantly inhibits T cell anti-tumor activity through binding and then activating adenosine 2A receptors (A2aRs) of T cells. Based on the previous work, in our study, we evaluated whether A2aR disruption by shRNA could enhance the anti-tumor function of anti-mesothelin (MSLN) CAR T cells both in vitro and in vivo. For this goal above, we used MSLN-positive human ovarian serous carcinoma cells (SKOV3) and human colon cancer cells (HCT116) as target cancer cells while MSLN-negative human ovarian cancer cells (ES2) as non-target cancer cells. We observed that targeting cell-intrinsic A2aR through shRNA overexpression caused significant A2aR disruption in CAR T cells and profoundly increased CAR T cell efficacy in both CAR T cell cytokine production and cytotoxicity towards MSLN-positive cancer cells in vitro. More importantly, in SKOV3 xenograft mouse models, anti-MSLN CAR-T cells significantly reduced the tumor burden compared with non-transduced T cells, and the anti-tumor activity of A2aR-disrupted anti-MSLN CAR-T cells was stronger than that of wild-type anti-MSLN CAR-T cells. Altogether, our study showed enhanced anti-tumor efficacy caused by shRNA-mediated A2aR disruption in anti-MSLN CAR T cells both in vitro and in vivo, which proved that shRNA-mediated modification of gene expression might be an excellent strategy for improving CAR T cell function in immunosuppressive tumor microenvironment (TME) and could potentially improve the outcome of treatment in clinical trials.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Protection against Chemical Warfare Agents and Biological Threats Using Metal–Organic Frameworks as Active Layers

The SARS-CoV-2 pandemic outbreak and the unfortunate misuse of toxic chemical warfare agents (CWAs) highlight the importance of developing functional materials to protect against these chemical and pathogen threats. Metal–organic frameworks (MOFs), which comprise a tunable class of crystalline porous materials built from inorganic nodes and organic linkers, have emerged as a class of heterogeneous catalysts capable of rapid detoxification of multiple classes of these harmful chemical or biological hazards. In particular, zirconium-based MOFs (Zr-MOFs) feature Lewis acidic nodes that serve as active sites for a wide range of catalytic reactions, including the hydrolysis of organophosphorus nerve agents within seconds in basic aqueous solutions. In addition, postsynthetic modification of Zr-MOFs enables the release of active species capable of reacting with and deactivating harmful pathogens. Despite this impressive performance, utilizing Zr- MOFs in powder form is not practical for application in masks or protective uniforms. To address this challenge, our team sought to develop MOF/fiber composite systems that could be adapted for use under realistic operating conditions to protect civilians, military personnel, and first responders from harmful pathogens and chemical warfare agents. Over the last several years, our group has designed and fabricated reactive and biocidal MOF/fiber composites that effectively capture and deactivate these toxic species. In this Account, we describe the evolution of these porous and reactive MOF/fiber composites and focus on key design challenges and considerations. First, we devised a scalable method for the integration of Zr-MOFs onto textile substrates using aqueous precursor solutions and without using pretreated textiles, highlighting the potential scalability of this method. Moving beyond standard textiles, we also developed a microbial synthesis strategy to prepare hierarchically porous MOF/bacterial cellulose nanofiber composite sponges that can both capture and detoxify nerve agents when exposed to contaminated gas flows. The mass loading of the MOF in the nanofibrous composite sponge is up to 90%, affording higher work capacities compared to those of textile-fiber-based composites with relatively lower MOF loadings. Next, we demonstrated that heterogeneous polymeric bases are suitable replacements for volatile liquid bases typically used in solution-phase reactions, and we showed that these composite systems are capable of effectively hydrolyzing nerve agents in the solid state by using only water that is present as humidity. Moreover, incorporating a reactive dye precursor into the composite affords a dual function sensing and detoxifying material that changes color from white to orange upon reaction with the byproduct following nerve agent hydrolysis, demonstrating the versatility of this platform for use in decontamination applications. We then created chlorine-loaded MOF/fiber composites that act as biocidal and reactive textiles that are capable of not only detoxifying sulfur-mustard-based chemical warfare agents and simulants but also deactivating both bacteria and the SARS-CoV-2 virus within minutes of exposure. Lastly, we synthesized a mixed-metal Ti/Zr-MOF coating on cotton fibers to afford a photoactive biocidal cloth that shows fast and broad-spectrum biocidal performance against viruses and Gram-positive and Gram-negative bacteria under visible light irradiation. Given the tunable, multifunctional nature of these MOF/fiber composites, we believe that this Account will offer new insights for the rational design and preparation of functional MOF/fiber composites and pave the way toward the development of next-generation reactive and protective textiles.

36 MATERIALS SCIENCE↗