Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Building metallic glass structures on crystalline metal substrates by laser-foil-printing additive manufacturing

In laser-foil-printing additive manufacturing, 3D metallic glass structures can be built by laser welding of amorphous foils, layer by layer, upon a crystalline metal substrate. Here, in this paper, weldability studies for laser welding of Zr 52.5 Ti 5 Al 10 Ni 14.6 Cu 17.9 amorphous foils onto a Ti-6Al-4V (Ti 6-4) or Zr 702 substrate are conducted. After laser welding, the weldments are analyzed using X-ray diffractometer, optical microscope, scanning electron microscope equipped with energy dispersive spectroscopy and micro-hardness tester. The results show that Zr 702 is a suitable substrate for Zr-based metallic glass structure since crack-free weld joints can be obtained owing to the formation of ductile α-Zr, while Ti 6-4 is not an appropriate substrate since it has high cracking susceptibility due to the formation of a large amount of hard and brittle intermetallics near the foil-substrate interface. It was found that the mixing between melted substrate and foil is not uniform but exhibits a distinct “swirl” pattern. The swirl structure is more pronounced in Ti 6-4 than in Zr 702 substrate which may contribute to its high cracking susceptibility. The aforementioned mixing leads to partial crystallization of the first amorphous layer; however, fully amorphous is achieved in the additional welding layers.

36 MATERIALS SCIENCE↗

Spin Hall switching of the magnetization in Ta/TbFeCo structures with bulk perpendicular anisotropy

Spin-orbit torques are studied in Ta/TbFeCo/MgO patterned structures, where the ferrimagnetic material TbFeCo provides a strong bulk perpendicular magnetic anisotropy (bulk-PMA) independent of the interfaces. The current-induced magnetization switching in TbFeCo is investigated in the presence of a perpendicular, longitudinal, or transverse field. An unexpected partial-switching phenomenon is observed in the presence of a transverse field unique to our bulk-PMA material. It is found that the anti-damping torque related with spin Hall effect is very strong, and a spin Hall angle is determined to be 0.12. The field-like torque related with Rashba effect is unobservable, suggesting that the interface play a significant role in Rashba-like torque.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial Cu{sub 2}ZnSnS{sub 4} thin film on Si (111) 4° substrate

To explore the possibility of Cu{sub 2}ZnSnS{sub 4} (CZTS)/Si based tandem solar cells, the heteroepitaxy of tetragonal Cu{sub 2}ZnSnS{sub 4} thin films on single crystalline cubic Si (111) wafers with 4° miscut is obtained by molecular beam epitaxy. The X-ray θ-2θ scan and selected area diffraction patterns of the CZTS thin films and Si substrates, and the high resolution transmission electron microscopy image of the CZTS/Si interface region demonstrate that the CZTS thin films are epitaxially grown on the Si substrates. A CZTS/Si P-N junction is formed and shows photovoltaic responses, indicating the promising application of epitaxial CZTS thin films on Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GIWAXS-SIIRkit: scattering intensity, indexing and refraction calculation toolkit for grazing-incidence wide-angle X-ray scattering of organic materials

Grazing-incidence wide-angle X-ray scattering (GIWAXS) has become an increasingly popular technique for quantitative structural characterization and comparison of thin films. For this purpose, accurate intensity normalization and peak position determination are crucial. At present, few tools exist to estimate the uncertainties of these measurements. Here, a simulation package is introduced called GIWAXS-SIIRkit , where SIIR stands for scattering intensity, indexing and refraction. Furthermore, the package contains several tools that are freely available for download and can be executed in MATLAB. The package includes three functionalities: estimation of the relative scattering intensity and the corresponding uncertainty based on experimental setup and sample dimensions; extraction and indexing of peak positions to approximate the crystal structure of organic materials starting from calibrated GIWAXS patterns; and analysis of the effects of refraction on peak positions. Additionally, each tool is based on a graphical user interface and designed to have a short learning curve. A user guide is provided with detailed usage instruction, tips for adding functionality and customization, and exemplary files.

36 MATERIALS SCIENCE↗

Precipitation in Al–Mg solid solution prepared by solidification under high pressure

The precipitation in Al–Mg solid solution containing 21.6 at.% Mg prepared by solidification under 2 GPa was investigated. The results show that the γ-Al{sub 12}Mg{sub 17} phase is formed and the β′ phase cannot be observed in the solid solution during ageing process. The precipitation of γ and β phases takes place in a non-uniform manner during heating process, i.e. the γ and β phases are first formed in the interdendritic region, which is caused by the inhomogeneous distribution of Mg atoms in the solid solution solidified under high pressure. Peak splitting of X-ray diffraction patterns of Al(Mg) solid solution appears, and then disappears when the samples are aged at 423 K for different times, due to the non-uniform precipitation in Al–Mg solid solution. The direct transformation from the γ to β phase is observed after ageing at 423 K for 24 h. It is considered that the β phase is formed through a peritectoid reaction of α + γ → β which needs the diffusion of Mg atoms across the interface of α/γ phases. - Highlights: • The γ phase is formed and the β′ phase is be observed in Al(Mg) solid solution. • Peak splitting of XRD pattern of Al(Mg) solid solution appears during aged at 150 °C. • The β phase is formed through a peritectoid reaction of α + γ → β.

36 MATERIALS SCIENCE↗

Crystal structure of a 3B3 variant - A broadly neutralizing HIV-1 scFv antibody

We present the crystal structure determination of an anti-HIV-1 gp120 single-chain variable fragment antibody variant, 3B3, at 2.5 {angstrom} resolution. This 3B3 variant was derived from the b12 antibody, using phage display and site-directed mutagenesis of the variable heavy chain (V{sub H}) complementary-determining regions (CDRs). 3B3 exhibits enhanced binding affinity and neutralization activity against several cross-clade primary isolates of HIV-1 by interaction with the recessed CD4-binding site on the gp120 envelope protein. Comparison with the structures of the unbound and bound forms of b12, the 3B3 structure closely resembles these structures with minimal differences with two notable exceptions. First, there is a reorientation of the CDR-H3 of the V{sub H} domain where the primary sequences evolved from b12 to 3B3. The structural changes in CDR-H3 of 3B3, in light of the b12-gp120 complex structure, allow for positioning an additional Trp side chain in the binding interface with gp120. Finally, the second region of structural change involves two peptide bond flips in CDR-L3 of the variable light (VL) domain triggered by a point mutation in CDR-H3 of Q100eY resulting in changes in the intramolecular hydrogen bonding patterning between the VL and VH domains. Thus, the enhanced binding affinities and neutralization capabilities of 3B3 relative to b12 probably result from higher hydrophobic driving potential by burying more aromatic residues at the 3B3-gp120 interface and by indirect stabilization of intramolecular contacts of the core framework residues between the VL and VH domains possibly through more favorable entropic effect through the expulsion of water.

08 HYDROGEN↗

Effects of aluminum on epitaxial graphene grown on C-face SiC

The effects of Al layers deposited on graphene grown on C-face SiC substrates are investigated before and after subsequent annealing using low energy electron diffraction (LEED), photoelectron spectroscopy, and angle resolved photoemission. As-deposited layers appear inert. Annealing at a temperature of about 400 °C initiates migration of Al through the graphene into the graphene/SiC interface. Further annealing at temperatures from 500 °C to 700 °C induces formation of an ordered compound, producing a two domain √7× √7R19° LEED pattern and significant changes in the core level spectra that suggest formation of an Al-Si-C compound. Decomposition of this compound starts after annealing at 800 °C, and at 1000 °C, Al is no longer possible to detect at the surface. On Si-face graphene, deposited Al layers did not form such an Al-Si-C compound, and Al was still detectable after annealing above 1000 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Unidirectional Two-Compartment Neuron Circuit with On-chip STDP learning

Most neuromorphic chips implement the single-compartment point neuron model where synapse circuits connect directly to a leaky integrate and fire (LIF) soma circuit. However, when using a biologically plausible soma circuit (e.g., Hodgkin-Huxley neuron model), an interface circuitry, such as a current conveyor circuit, is needed to transmit synaptic current to the soma circuit. This is especially true for ultra-low power neuron circuits, where membrane capacitance is on the order of 20 fF. This need for an interface circuit arises because the parasitic capacitance and leakage current caused by fabrication mismatch and second-order effects of the output transistors in the synapse circuits can disturb the spiking dynamics of the soma circuit if connected without an interface. Using an interface circuit to isolate the soma’s membrane capacitor from synapses resolves this issue. We propose to use a unidirectional resistor (a transconductance circuit) to connect the synapse and soma circuits instead of conventional current conveyor circuits. Using a biologically plausible spike pattern detection model, we show that the on-chip spike-timing-dependent plasticity (STDP) learning performance of the proposed unidirectional two-compartment neuron circuit is similar to a single-compartment circuit (with a current conveyor as an interface) and additionally, it is more power-efficient and biologically plausible. The chip is fabricated in the Taiwan Semiconductor Manufacturing Company (TSMC) 250 nm technology node and comprises a single neuron circuit.

Gautam, Ashish [ORNL]↗

Transparency and damage tolerance of patternable omniphobic lubricated surfaces based on inverse colloidal monolayers

A transparent coating that repels a wide variety of liquids, prevents staining, is capable of self-repair and is robust towards mechanical damage can have a broad technological impact, from solar cell coatings to self-cleaning optical devices. Here we employ colloidal templating to design transparent, nanoporous surface structures. A lubricant can be firmly locked into the structures and, owing to its fluidic nature, forms a defect-free, self-healing interface that eliminates the pinning of a second liquid applied to its surface, leading to efficient liquid repellency, prevention of adsorption of liquid-borne contaminants, and reduction of ice adhesion strength. We further show how this method can be applied to locally pattern the repellent character of the substrate, thus opening opportunities to spatially confine any simple or complex fluids. The coating is highly defect-tolerant due to its interconnected, honeycomb wall structure, and repellency prevails after the application of strong shear forces and mechanical damage. The regularity of the coating allows us to understand and predict the stability or failure of repellency as a function of lubricant layer thickness and defect distribution based on a simple geometric model.

Vogel, N↗

Controlled Selective CVD Growth of ZnO Nanowires Enabled by Mask‐Free Fabrication Approach using Aqueous Fe Catalytic Inks

Abstract Fabrication process that enables selective growth of vertically oriented zinc oxide (ZnO) nanowires (NWs) via chemical vapor deposition method and mask‐free patterning approach is reported. It is shown that synthesis of high‐quality ZnO nanowires in various architectures is achievable by optimizing the growth conditions and by precise patterning of catalytic ink precursors. Parallel direct‐write patterning method is utilized to fabricate arrays of different architectures on Si/SiO 2 substrates and directly on devices at preselected locations. The production of high‐quality, crystalline ZnO NWs is demonstrated using aqueous iron catalytic inks. The composition of the ink and the lateral size of the patterns deposited on substrates are shown to affect the resulting nanowires and thus, allowing to control the geometry (length and diameter) of the individual ZnO NWs in the patterned assemblies. The results indicate that our protocols are tailored to the fabrication of ZnO NWs with specific surface geometries and interface functionalities for variety of targeted device applications.

Alameri, Dheyaa↗

Alkali-silica reaction products and cracks: X-ray micro-tomography-based analysis of their spatial-temporal evolution at a mesoscale

In this study, we propose a laboratory-scale methodology, based on X-ray micro-tomography and caesium (Cs) as a contrast agent, to advance the understanding of cracking due to alkali-silica reaction (ASR) in concrete. The methodology allows achieving a completely non-destructive and time-lapse characterization of the spatial-temporal patterns of both the cracks and the ASR products. While Cs addition slightly accelerated the ASR kinetics, the crack patterns, with and without Cs addition, were statistically equivalent. Cracks with ASR products appeared first in the aggregates, close to the interface with the cement paste. They propagated afterwards towards the aggregates interior. Some products were then extruded for several mm into air voids and cracks in the cement paste. This process suggests that, in the early stage, the ASR products may be a low-viscosity gel that can flow away from the source aggregate and may settle later elsewhere as a rigid phase, upon calcium uptake.

36 MATERIALS SCIENCE↗

AAVR-Displaying Interfaces: Serotype-Independent Adeno-Associated Virus Capture and Local Delivery Systems

Interfacing gene delivery vehicles with biomaterials has the potential to play a key role in diversifying gene transfer capabilities, including localized, patterned, and controlled delivery. However, strategies for modifying biomaterials to interact with delivery vectors must be redesigned whenever new delivery vehicles and applications are explored. We have developed a vector-independent biomaterial platform capable of interacting with various adeno-associated viral (AAV) serotypes. A water-soluble, cysteine-tagged, recombinant protein version of the recently discovered multi-AAV serotype receptor (AAVR), referred to as cys-AAVR, was conjugated to maleimide-displaying polycaprolactone (PCL) materials using click chemistry. The resulting cys-AAVR-PCL system bound to a broad range of therapeutically relevant AAV serotypes, thereby providing a platform capable of modulating the delivery of all AAV serotypes. Intramuscular injection of cys-AAVR-PCL microspheres with bound AAV vectors resulted in localized and sustained gene delivery as well as reduced spread to off-target organs compared to a vector solution. This cys-AAVR-PCL system is thus an effective approach for biomaterial-based AAV gene delivery for a broad range of therapeutic applications.

59 BASIC BIOLOGICAL SCIENCES↗

Beyond the eutectic paradigm: nanolamellar patterns in a rapidly solidified peritectic alloy

Peritectic transformations are central to many structural alloys, yet pattern formation remains poorly understood due to complex growth dynamics and limited three-dimensional data. Here, we report an unusual two-phase microstructure in a Zn–Ag peritectic alloy subjected to rapid solidification by laser surface remelting. Synchrotron X-ray nanotomography reveals a lamellar structure of primary 𝜀-AgZn 3 and peritectic Zn with ∼700 nm spacing. Although resembling a eutectic morphology, this pattern forms without a eutectic reaction through non-steady coupled growth from the liquid. SEM and TEM-EDS confirm interface shapes and phase compositions. These findings expand the design space of peritectics for refined microstructural control.

36 MATERIALS SCIENCE↗

Electrohydrodynamic instabilities in thin trilayer liquid films.

When DC or AC electric fields are applied to a thin liquid film, the interface may become unstable and form a series of pillars. We examine how the presence of a second liquid interface influences pillar dynamics and morphologies. For perfect dielectric films, linear stability analysis of a lubrication-approximation-based model shows that the root mean square voltage governs the pillar behavior. For leaky dielectric films, Floquet theory is applied to carry out the linear stability analysis, and reveals that the accumulation of free charge at each interface depends on the conductivities in the adjoining phases and that high frequencies of the AC electric field may be used to control this accumulation at each interface independently. The results presented here may of interest for the controlled creation of surface topographical features in applications such as patterned coatings and microelectronics.

36 MATERIALS SCIENCE↗

Emergence of complex-regular eutectic patterns in Al–Ge: Observations from correlative nano-imaging

Eutectic solidification exemplifies nonequilibrium pattern formation, making it a well-studied moving boundary problem. Yet the mechanisms behind the formation of complex-regular microstructures – particularly in highly anisotropic systems with a significant volume fraction of a faceted phase – remain poorly understood. Our understanding of such systems is made complicated by the nonlinear interface kinetics and unique growth dynamics characteristic of faceted phases. To address these challenges, we investigate a model Al–Ge eutectic system, where the faceted Ge phase constitutes a substantial volume fraction (~0.35) and where the two solid phases arrange into so-called “fishbone” or “feather” complex-regular patterns. Using synchrotron-based x-ray nano-imaging and nanotomography with high spatial resolution (22 nm per pixel), we capture in real-time the evolution of the solid–liquid interfaces and the resulting three-dimensional microstructures in this faceted/non-faceted eutectic system. By integrating these observations with electron backscattered diffraction, we elucidate the crystallographic biases on the solidification process and the mechanisms driving the formation of such complex-regular microstructures. These findings inform a new growth model for irregular eutectics in (near-)symmetrical phase diagrams, offering insight on advanced microstructural design and processing strategies. More broadly, we demonstrate how interfacial curvature is generated in irregular eutectic alloys and how it depends on the volume fraction of the faceted phase.

36 MATERIALS SCIENCE↗