Search NASA⌕ Search

SEARCH · Search NASA

Results for “irregular shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Lunar mare domes - Classification and modes of origin

In this paper, lunar mare domes (LMDs) are classified according to morphologic and morphometric (primarily diameter) characteristics, and consideration is given to their origin and role in lunar surface processes. In general, they occur either as low, flat, circular structures with convex shapes, slopes less than about 5 deg, and display summit craters, or as irregular structures often adjacent to highland regions and rarely containing summit craters. It is found that LMDs originate through extrusion of lavas through vents to produce low lava shields, or through flooding and draping of preexisting topography to produce kipukas and irregular domes. Smooth, vent-related mare domes range from about 3-17 km in diameter and up to several hundred meters in elevation; they are similar in morphology to small terrestrial lava shields.

Head, J. W.↗
NASA NTRS1984

Phobos: Close encounter imaging from the Viking Orbiters

The shape and orbital characteristics of Phobos, the larger and innermost of Mars' two irregular moons, are discussed and illustrated. Also presented are the high resolution pictures of Phobos that were obtained during the close flybys of Viking Orbiters 1 and 2. The viewing geometry is also given for each picture.

Duxbury, T. C.↗
NASA NTRS1988

A scattering model for forested area

A forested area is modeled as a volume of randomly oriented and distributed disc-shaped, or needle-shaped leaves shading a distribution of branches modeled as randomly oriented finite-length, dielectric cylinders above an irregular soil surface. Since the radii of branches have a wide range of sizes, the model only requires the length of a branch to be large compared with its radius which may be any size relative to the incident wavelength. In addition, the model also assumes the thickness of a disc-shaped leaf or the radius of a needle-shaped leaf is much smaller than the electromagnetic wavelength. The scattering phase matrices for disc, needle, and cylinder are developed in terms of the scattering amplitudes of the corresponding fields which are computed by the forward scattering theorem. These quantities along with the Kirchoff scattering model for a randomly rough surface are used in the standard radiative transfer formulation to compute the backscattering coefficient. Numerical illustrations for the backscattering coefficient are given as a function of the shading factor, incidence angle, leaf orientation distribution, branch orientation distribution, and the number density of leaves. Also illustrated are the properties of the extinction coefficient as a function of leaf and branch orientation distributions. Comparisons are made with measured backscattering coefficients from forested areas reported in the literature.

Karam, M. A.↗
NASA NTRS1987

Shapes of small satellites

The accurate measurement of limb coordinates on small satellite is the major technique for evaluating their sizes and shapes in the absence of good stereoscopic image coverage. The shapes of satellites may be clues to their internal structure if they are relaxed into ellipsoids. The distinction between irregular and ellipsoidal satellites can now be made quantitatively with the availability of many accurate limb profiles of satellites. The residuals from these fit ellipses provide a convenient and quantitative measure of the topography on the satellites. Departures from gravitational (and tidal) equipotentials would be greater, but on the average this is a good measure of the relaxed or nonrelaxed nature of the shape of the objects. The limb topography is also related to specific forms on the objects, and a systematic survey of these forms on small and larger objects is underway.

Thomas, P.↗
NASA NTRS1979

Electrostatically formed antennas

The electrostatically controlled membrane mirror (ECMM) is a way to achieve large, very light reflectors for radar, radio astronomy, radiometry, and optical devices. The concept is that of using electrostatic forces to tension a thin conducting membrane and to maintain it in a precision antenna shape. The ECMM is an adaptive structure which maintains surface quality despite errors in construction, irregularities of materials, solar heating, and onboard disturbances. The combination of high gain and low mass makes the ECMM ideally suited for space applications.

Mihora, D. J.↗
NASA NTRS1990

HII regions in dwarf irregular galaxies of the local group

Deep, narrowband H alpha Charge Coupled Device (CCD) surveys of HII regions were carried out in several dwarf irregular galaxies in and near the local group. Data are now complete for these galaxies: NGC 6822, GR 8, IC 10, IC 1613, Sextans A, Sextans B, and Sag Irr. Observations are complete for DDO 47, 53, 167, 168 and 187. Details of some of the results for the surveys completed so far are discussed. For NGC 6822, CCD survey at H alpha resulted in the detection of 145 HII regions in the local group irregular galaxy NGC 6822. Most of them are newly detected, faint surface-brightness objects. Positions, maps and dimensions are being published elsewhere. For GR 8, a deep narrowband H alpha imaging of the nearby dwarf irregular galaxy GR 8 revealed a total of 32 HII regions. Positions, H alpha luminosities, and sizes of these objects were determined. The H alpha luminosity function has the same shape as that for more luminous galaxies, except for size of sample effects. Most HII regions detected are at the very low luminosity end of the general luminosity function. For IC 10, a deep CCD narrowband H alpha imaging of the local group dwarf irregular galaxy IC 10 revealed a total of 144 HII regions. Positions, H alpha luminosities, and sizes of these objects were determined. The H alpha luminosity function has the same shape as that for more luminous galaxies.

Hodge, Paul↗
NASA NTRS1992

Proteus - Geology, shape, and catastrophic destruction

Least-squares fits to the two available limb profiles of Proteus yield a sphericity close to unity; the visual irregularity is due to a degree of surface roughness comparable to that of Hyperion and the smaller icy satellites. A network of streaks that can be interpreted as tectonic troughs cuts the surface of Proteus, and is organized concentrically around either one of the two nearly-coincident Proteus-Neptune of Pharos axes of symmetry. If the streaks are tectonic, they may be due to tidal stresses generated by a past change in Proteus' equilibrium orientation. The streaks may also be disruptive-stress fractures.

Croft, Steven K.↗
NASA NTRS1970

Galactic astronomy; Proceedings of the Second Summer Institute for Astronomy and Astrophysics, State University of New York, Stony Brook, N.Y., June 19-July 17, 1968. Volumes 1 & 2.

Basic problems on the structure of our galaxy are presented. The essentially spiral structure of the galaxies is examined by a theory of the spiral shape, and by a study of the spiral structure with the 21-cm line of neutral hydrogen. Irregular spirals are discussed, and some problems that arise as a result of large deviations from the regular spiral structure are treated. The density wave theory of spiral structure is compared with the observed spiral structure of the galaxies. A section on the star migration technique, which is used to test the density wave theory of galactic spirals, is included. The interstellar medium is described in terms of such phenomena as supernova explosions and cosmic rays, both of which contribute to the energy balance of the medium. Other topics that are germaine to a description of the interstellar medium are the UV spectrum, kinematics of interstellar clouds, and ionization equilibrium. The implications of spiral galactic shock pattern on star formation along spiral arms are investigated, and by means of a blast wave model, it is shown that a hydrodynamic shock of galactic scale exists in galaxy M82.

Chiu, H.-Y.↗
NASA NTRS1995

Full-Wave Analysis Of MMICs Using A Generalized Yee Algorithm

Improved method of temporal analysis of propagation of electro-magnetic waves in monolithic microwave integrated circuits (MMICs) implemented by generalized version of traditional Yee algorithm. Provides more accurate mathematical modeling for analysis and design of MMICs. Based on unstructured and otherwise irregular grids. Grids readily fitted to conductive and dielectric circuit elements having realistically complex three-dimensional shapes. Better for modeling important and geometrically complex phenomena like fringing fields.

Lansing, Faiza S.↗
NASA NTRS1983

Evaluation of ceramics for stator applications: Gas turbine engines interim report. Stator fabrication and evaluation

The objective was to assess current ceramic materials, fabrication processes, reliability prediction, and stator durability when subjected to simulated automotive gas turbine engine operating conditions. Ceramic one-piece stators were fabricated of two materials, silicon nitride and silicon carbide, using two near-net-shape processes, slip casting and injection molding. Non-destructive evaluation tests were conducted on all stators identifying irregularities which could contribute to failures under durability testing. Development of the test rig and automatic control system for repeatably controlling air flow rate and temperature over a highly transient durability duty cycle is discussed. Durability results are presented for repeated thermal cycle testing of the ceramic one-piece stators. Two duty cycles were used, encompassing the temperature ranges of 704 to 1204 C (1300 to 2200 F) and 871 to 1371 C (1600 to 2500 F). Tests were conducted on 28 stators, accumulating 135,551 cycles in 2441 hours of hot testing. Cyclic durability for the ceramic one-piece stator was demonstrated to be in excess of 500 hours, accumulating over 28,850 thermal cycles. Ceramic interface forces were found to be the significant factor in limiting stator life rather than the scatter in material strength properties or the variation in component defects encountered.

Arnon, N.↗
NASA NTRS1987

Laser Scanner for Tile-Cavity Measurement

Irregular surfaces mapped and digitized for numerical-control machinery. Fast, accurate laser scanning system measures size and shape of cavity without making any physical contact with cavity and walls. Measurements processed into control signals for numerically controlled machining of tile or block to fit cavity. System generates map of grid points representing cavity and portion of outer surface surrounding cavity. Map data used to control milling machine, which cuts tile or block to fit in cavity.

Yoshino, Stanley Y.↗
NASA NTRS2001

Retrieval of Polar Stratospheric Cloud Microphysical Properties from Lidar Measurements: Dependence on Particle Shape Assumptions

A retrieval algorithm has been developed for the microphysical analysis of polar stratospheric cloud (PSC) optical data obtained using lidar instrumentation. The parameterization scheme of the PSC microphysical properties allows for coexistence of up to three different particle types with size-dependent shapes. The finite difference time domain (FDTD) method has been used to calculate optical properties of particles with maximum dimensions equal to or less than 2 mu m and with shapes that can be considered more representative of PSCs on the scale of individual crystals than the commonly assumed spheroids. Specifically. these are irregular and hexagonal crystals. Selection of the optical parameters that are input to the inversion algorithm is based on a potential data set such as that gathered by two of the lidars on board the NASA DC-8 during the Stratospheric Aerosol and Gas Experiment 0 p (SAGE) Ozone Loss Validation experiment (SOLVE) campaign in winter 1999/2000: the Airborne Raman Ozone and Temperature Lidar (AROTEL) and the NASA Langley Differential Absorption Lidar (DIAL). The 0 microphysical retrieval algorithm has been applied to study how particle shape assumptions affect the inversion of lidar data measured in leewave PSCs. The model simulations show that under the assumption of spheroidal particle shapes, PSC surface and volume density are systematically smaller than the FDTD-based values by, respectively, approximately 10-30% and approximately 5-23%.

Reichardt, J.↗
NASA NTRS2002

Toward an Improved Single-Particle Model for Large Irregular Grains

To interpret remote spectral observations, scattering and absorption in a particulate surface are simulated via radiative transfer models. The standard model for this purpose among the planetary science community is the Hapke model. This model (like many others) uses two parameters to characterize the optical behavior of individual grains in a particulate surface, the single-scattering albedo omega and phase function p(g). These terms describe, respectively, the quantity and the angular distribution of light scattered by an individual grain. Unfortunately, these parameters are strictly optical. They can be rather difficult to interpret in terms of more interesting particle properties such as grain sizes, shapes, and compositions, that a remote sensing experiment might seek to discover. An equivalent slab approximation is typically used to relate omega to the grain size and optical constants of the material. This approach can mimic the wavelength-dependent absorption behavior of irregular grains, as long as the imaginary index kappa is much less than 1, the shape is equant, and the grain size D is much larger than the wavelength lambda. Unfortunately, the equivalent slab approach provides no information about p(g), which also has a strong dependence on optical constants and particle form.

Grundy, W. M.↗
NASA NTRS1982

Conceptual design of electrostatic antenna

The concept of using electrostatic forces to tension a thin, conducting membrane and maintain it in a precision antenna shape is discussed. This electrostatically controlled membrane mirror is an adpative structure which maintains surface quality despite errors in construction, irregularities of materials, solar heating, and on board disturbances.

Coyner, J. V.↗
NASA NTRS1985

Profiles of fatigue damage in graphite/epoxy composites from ultrasonic transmission power spectra

Early fatigue damage in non-unidirectional multi-ply graphite/epoxy composites is manifested by a distribution of cracks and disbonds through the bulk of the material. Such damage is subtle and is difficult to detect with conventional ultrasonic technology. Consequently, a new ultrasonic measurement technique called phase-insensitive tone-burst spectroscopy has been developed. The new technique eliminates problems associated with phase cancellation and pulse shape artifacts inherent to conventional broadband ultrasonic spectral measurement systems and produces clean spectral information irrespective of specimen inhomogeneity or irregularities in surface geometry. Application of the new technique to measurements of graphite/epoxy composites has yielded frequency-domain profiles that show distinct differences in ultrasonic attenuation, attenuation slope, and velocity for each specimen experiencing a different level of fatigue damage.

Cantrell, J. H., Jr.↗
NASA NTRS1989

Modelling asteroid brightness variations. II - The interpretability of light curves and phase curves

Light curves and phase curves have been computed for various asteroid models using the Lumme-Bowell (1981) scattering law. The effects of the scattering parameters on light curves were found to be almost negligible for homogeneous surfaces. The effects on phase curves were more distinct, but changing any of the scattering parameters affects the phase curves in a very similar way, making it impossible to find a unique set of parameter values corresponding to a given phase curve. Light curve amplitudes, on the other hand, depend very strongly on body shape. At least in the case of a triaxial ellipsoid it is possible to determine the axial ratios. Some observed irregularities of light curves can also be modelled easily, but the uniqueness of such models is far from obvious.

Karttunen, H.↗
NASA NTRS1995

Debris and meteoroid proportions deduced from impact crater residue analysis

This study is a further investigation of space-exposed samples recovered from the LDEF satellite and the Franco-Russian 'Aragatz' dust collection experiment on the Mir Space Station. Impact craters with diameters ranging from 1 to 900 micron were found on the retrieved samples. Elemental analysis of residues found in the impact craters was carried out using Energy Dispersive X-ray spectrometry (EDX). The analyses show evidence of micrometeoroid and orbital debris origins for the impacts. The proportions of these two components vary according to particle size and experimental position with respect to the leading edge of the spacecraft. On the LDEF leading edge 17 percent of the impacts were apparently caused by micrometeoroids and 11 percent by debris; on the LDEF trailing edge 23 percent of the impacts are apparently caused by micrometeoroids and 4 percent consist of debris particles - mostly larger than 3 micron in diameter - in elliptical orbits around the Earth. For Mir, the analyses indicate that micrometeoroids form 23 percent of impacts and debris 9 percent. However, we note that 60-70 percent of the craters are unidentifiable, so the definitive proportions of natural v. man-made particles are yet to be determined. Experiments carried out using a light gas gun to accelerate glass spheres and fragments demonstrate the influence of particle shape on crater morphology. The experiments also show that it is more difficult to analyze the residues produced by an irregular fragment than those produced by a spherical projectile. If the particle is travelling above a certain velocity, it vaporizes upon impact and no residues are left. Simulation experiments carried out with an electrostatic accelerator indicate that this limit is about 14 km/s for Fe particles impacting Al targets. This chemical analysis cut-off may bias interpretations of the relative populations of meteoroid and orbital debris. Oblique impacts and multiple foil detectors provide a higher likelihood of detection of residues as the velocities involved are lower.

Berthoud, Lucinda↗
NASA NTRSDate not supplied

Sensitivity Analysis of Geometric Imperfection Sources in Honeycomb Cores on Flatwise Compression Behavior

Manufacturing aluminum honeycomb core material using the expansion process can lead to geometric imperfections in the cellular core structures. These imperfections arise due to irregularities introduced in the initial foil bonding, variations in foil thickness, and residual stresses from manufacturing processes. Such geometric imperfections include cell shape distortions, cell wall waviness, non-uniform cell wall thickness, and variability in the shape and height of the adhesive fillet. Imperfections in the cell walls negatively affect the transverse compression and shear strength, while also reducing the resistance to damage under impact loads. Previous work presented the identification and quantification of these manufactured imperfections using high resolution X-ray computed tomography (CT) scans of honeycomb cores in co-cured composite sandwich panels. The present paper presents a sensitivity analysis of individual components of the sources of geometric imperfections on the flatwise compression of aluminum honeycomb cores. The initial geometric imperfections in honeycomb cells are decomposed into three components, namely cell shape (cell edge length and cell internal angles) in-plane cell wall waviness, and out-of-plane waviness along the core thickness. A sensitivity analysis is conducted using finite element (FE) models of the decomposed imperfections to understand how each component affects compression failure.

aluminum honycomb↗