Search NASA⌕ Search

SEARCH · Search NASA

Results for “key exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Unified Entrainment and Detrainment Closures for Extended Eddy-Diffusivity Mass-Flux Schemes

The extended Eddy Diffusivity Mass Flux (EDMF) scheme is used as a unied parameterization that simulates subgrid-scale dynamics across a range of regimes.This work presents unied entrainment and detrainment closures that allow this scheme to simulate the dry convective boundary layer, shallow convection and deep convection , while adjacent works present other necessary closures for this unied scheme and test its performance for stable, stratocumulus topped and convective boundary layers. Entrainment and detrainment are modeled as a combination of turbulent and dynamical processes. The turbulent component is taken as downgradient diffusion between subdomains. The dynamical component is based on a ratio of buoyancy and vertical velocity that ensures consistent treatment of the ratio of mass-flux at vanishing area fraction. Dynamical detrainment is controlled by the difference in relative humidity between subdomains when liquid water is present. These closures are rst evaluated with entrainment and detrainment diagnosed from Large Eddy Simulations where decaying tracers are used to identify the different subdomains and mass exchanges between them. When implemented in a single column model (SCM), these closures are tested in simulations of several observationally motivated cases of dry convective boundary layer, shallow convection and deep convection. Results show good agreement between the SCM and Large Eddy Simulations in key properties for climate models and profiles of first, second and third moments. The development of diurnal cycles and the onset of and precipitation (with simplified microphysics) are well predicted by the SCM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Excitons in van der Waals magnetic materials

Two-dimensional magnetic semiconductors provide a unique platform where long-range magnetic order coexists with strongly bound excitons. Because excitonic states and magnetic moments originate from the same electronic orbitals and couple via intrinsic exchange interactions, optical excitations in these systems exhibit pronounced sensitivity to magnetic order. Recent experiments show unusually strong magneto-optical responses and direct exciton–magnon coupling, establishing new routes for controlling light–matter interactions with spin degrees of freedom. Here, this Review surveys key developments, focusing on representative material systems, experimental signatures, and theoretical frameworks used to describe these phenomena. We conclude with perspectives on how this rapidly evolving field could enable next-generation optoelectronic and quantum technologies leveraging the coupled dynamics of light, charge and spin.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Degradation Mechanisms in Advanced MEAs for PEM Water Electrolyzers Fabricated by Reactive Spray Deposition Technology

Proton exchange membrane water electrolyzers (PEMWEs) have demonstrated enormous potential as the next generation hydrogen production technology. The main challenges that the state-of-the-art PEMWEs are currently facing are excessive cost and poor durability. Understanding the failure modes in PEMWEs is a key factor for improving their durability, lowering the precious metal loading, and hence cost reduction. Here, reactive spray deposition technology (RSDT) has been used to fabricate a membrane electrode assembly (MEA) with one order of magnitude lower Pt and Ir catalyst loadings (0.2–0.3 mg PGM cm –2 ) in comparison to the precious metal loadings in the stat-of-the-art commercial MEAs (2–3 mg PGM cm –2 ). As fabricated MEA with an active area of 86 cm 2 , has been tested for over 5000 h at steady-state conditions that are typical for an industrial hydrogen production system. Herein, we present and discuss the results from a comprehensive post-test analysis of the MEA of interest. The main degradation mechanisms, governing the performance loss in the RSDT fabricated MEA with ultra-low precious metal loadings, have been identified and discussed in detail. All failure modes are critically compared and the main degradation mechanism with the highest impact on the MEA performance loss among the others is identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

gdess: A framework for evaluating simulated atmospheric CO 2 in Earth System Models

Atmospheric carbon dioxide (CO 2 ) plays a key role in the global carbon cycle and global warming. Climate-carbon feedbacks are often studied and estimated using Earth System Models (ESMs), which couple together multiple model components—including the atmosphere, ocean, terrestrial biosphere, and cryosphere—to jointly simulate mass and energy exchanges within and between these components. Despite tremendous advances, model intercomparisons and benchmarking are aspects of ESMs that warrant further improvement (Fer et al., 2021; Smith et al., 2014). Such benchmarking is critical because comparing the value of state variables in these simulations against observed values provides evidence for appropriately refining model components; moreover, researchers can learn much about Earth system dynamics in the process (Randall et al., 2019). We introduce `gdess` (a.k.a., Greenhouse gas Diagnostics for Earth System Simulations), which parses observational datasets and ESM simulation output, combines them to be in a consistent structure, computes statistical metrics, and generates diagnostic visualizations. In its current incarnation, `gdess` facilitates evaluating a model's ability to reproduce observed temporal and spatial variations of atmospheric CO 2 . The diagnostics implemented modularly in `gdess` support more rapid assessment and improvement of model-simulated global CO 2 sources and sinks associated with land and ocean ecosystem processes. We intend for this set of automated diagnostics to form an extensible, open source framework for future comparisons of simulated and observed concentrations of various greenhouse gases across Earth system models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Carbon-Based Quantum Information Science with Symmetry Protected Topological States (Final Report, DOE-BES award DE-SC0023105)

This research program established the scientific foundation for the rational, bottom-up design, synthesis, isolation, and investigation of symmetry-protected topological (SPT) electron spin qubits embedded in graphene nanoribbons (GNRs). The work focused on integrating atomically precise low-dimensional carbon nanostructures with emerging quantum logic architectures, providing a pathway toward scalable quantum materials for next-generation computing and sensing technologies. A central component of the program was the elucidation of fundamental relationships between real-space molecular architecture, local spin density distributions, electronic band dispersion, and energy level alignment in atomically precise GNR systems. These correlations define key operational parameters of SPT qubits and were systematically investigated to establish quantitative benchmarks against established molecular and solid-state spin qubit platforms. Attention was given to properties critical for quantum device performance, e.g. decoherence times, spectral sharpness of energy transitions, and tunable exchange interactions between spin states. The research demonstrated that these parameters can be engineered with atomic precision through scalable bottom-up synthetic strategies. Theory-guided design played a central role in identifying candidate structures hosting topologically protected spin states. Experimental validation was performed using both ensemble measurements and single-molecule characterization. In addition to advances in quantum materials synthesis, the program developed and applied spin-sensitive scanning probe microscopy techniques capable of directly probing quantum states and dynamic processes with atomic-scale spatial resolution. These capabilities enabled direct observation and characterization of quantum structures at the single-atom level. While the research activities were primarily hypothesis-driven fundamental investigations, the program adopted a comprehensive materials-by-design framework aimed at translating scientific discoveries into technological concepts compatible with scalable and intelligent manufacturing approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Numerical Model for the Dynamics of Pickup Ions Outside the Heliopause and IBEX “Ribbon” Observation

The leading mechanism for the origin of the Interstellar Boundary Explorer (IBEX) “ribbon” of enhanced energetic neutral atoms (ENAs) from the outer heliosphere is the so-called secondary ENA process. In this mechanism, neutralized ions escape the heliosphere, and after several times of charge exchange collision,s some propagate back toward Earth in directions nearly perpendicular to the local interstellar magnetic field. However, the physical processes governing the distribution of the pickup ions (PUIs) outside the heliopause are still unclear. In this study, we build a new global model of the IBEX ribbon, where a key component is to calculate the dynamics of the PUIs outside the heliopause by solving the gyrophase-averaged focused transport equations on top of the background magnetohydrodynamic-kinetic model for the heliosphere-interstellar medium interaction. We discuss how the properties of the simulated ribbon change with different scattering parameters and show simulation results of the ENA sky maps, ribbon centers, ribbon profiles at several azimuthal slices, the ribbon ENA source region, and the velocity distribution of PUIs in the ENA source region for different scattering frequencies. Our results show that the model can provide reasonable ribbon sky maps comparable to the observed ribbon when the PUI mean free path is on the order of several thousand astronomical units.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Taxonomic distribution of metabolic functions in bacteria associated with Trichodesmium consortia

The photosynthetic and diazotrophic cyanobacterium Trichodesmium is a key contributor to marine biogeochemical cycles in the subtropical-oligotrophic oceans. Trichodesmium form colonies that harbor a distinct microbial community in comparison to the surrounding seawater. The presence of their associated bacteria can expand Trichodesmium’s functional potential and is predicted to influence the cycling of carbon, nitrogen, phosphorus, and iron (C, N, P, and Fe). To link the bacteria associated with Trichodesmium to key functional traits and elucidate how community structure can influence nutrient cycling, we characterized Red Sea Trichodesmium colonies using metagenomics and metaproteomics. Colonies harbored bacteria that typically associate with algae and particles, such as the ubiquitous Alteromonas macleodii, but also lineages specific to Trichodesmium, such as members from the order Balneolales. The majority of associated bacteria were auxotrophic for different vitamins, indicating their dependency on vitamin production by Trichodesmium. The associated bacteria carry functional traits including siderophore biosynthesis, reduced phosphorus metabolism, and denitrification pathways. The analysis supports Trichodesmium as an active hotspot for C, N, P, Fe, and vitamin exchange. In turn, Trichodesmium may rely on associated bacteria to meet its high Fe demand as several lineages synthesize photolabile siderophores (e.g., vibrioferrin, rhizoferrin, petrobactin) which can enhance the bioavailability of particulate Fe to the entire consortium. Collectively, the results indicate that Trichodesmium colonies provide a structure where these interactions can take place. While further studies are required to clarify the exact nature of these interactions, Trichodesmium’s reliance on particle and algae-associated bacteria and the observed redundancy of key functional traits likely underpins the resilience of Trichodesmium within an ever-changing global environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Hydrogen Dissociation Controls 1-Hexyne Selective Hydrogenation on Dilute Pd-in-Au Catalysts

Increasing the selectivity of the catalytic hydrogenation of alkynes to alkenes is of major importance for the processing of petrochemicals and the production of fine chemicals. Achieving high selectivity for alkene formation at high conversions, however, remains a long-standing challenge in heterogeneous catalysis. Here, the mechanism and origin of the high selectivity of dilute Pd-in-Au catalysts has been studied by a combination of first-principles calculations, microkinetic simulations, and isotopic exchange hydrogenation experiments using Pd 0.04 Au 0.96 nanoparticles embedded in raspberry colloid-templated silica. The Pd is predominantly in the form of isolated atoms, only surrounded by Au atoms, based on prior studies. The simulations indicate that the rate-limiting process for 1-hexyne hydrogenation on Pd monomers in Au(111) is H 2 dissociation, which has a large free energy barrier of 0.86 eV at 363 K and 0.2 bar of H 2 . The C–H bond formation steps, on the other hand, proceed with lower barriers, which contrasts with previous studies of extended Pd catalysts. The microkinetic simulations identify the sizable H 2 dissociation barrier and the small barrier for the hydrogenation of 1-hexyne as key factors that lead to a high selectivity for the production of 1-hexene from 1-hexyne, even at high conversion. The unconventional H 2 dissociation limiting process in combination with the low coverage of weakly bound hydrocarbon intermediates explains the near-zero order of 1-hexyne found experimentally. Furthermore, the partial hydrogenation of 1-hexyne to form 1-hexene is shown to be an irreversible process from our isotopic exchange hydrogenation experiments and is explained by the strongly exothermic nature of the reaction. Diluting active species, like Pd, in a less active host metal, like Au, hence appears promising as a means of tuning the binding energy of reactants and altering reaction profiles, leading to distinct kinetic behavior for an optimal catalytic activity and selectivity. Furthermore, the combination of microkinetic modeling, density functional theory calculations, and isotopic exchange experiments is thus demonstrated to be an effective approach to modeling important catalytic phenomena.

1-hexyne↗
DOE OSTI2025

Structural and Electronic Complexities of a Sulfur‐Bridged Di‐Iron Complex Composed of Mono‐ and Di‐Nitrosyl Units

The delocalized, thermodynamically stable cation, [(N 2 S 2 )Fe(NO)•Fe(NO) 2 ] + , an adduct of mono-nitrosyl and dinitrosyl iron units, is analyzed to address the unusual stability of the sulfur-bridged diiron complex in its three overall redox levels, +, 0, and −. X-ray diffraction and myriad spectroscopic techniques probe products of sequential electron uptake in the corresponding neutral and anionic species. Conundrums include unified blueshifts of the overall 3-band, ν(NO), pattern with added electrons. One-electron reduction changes the anti-ferromagnetically coupled, S = 0, cationic diiron species to the neutral analog, S = ½, with unpaired spin mainly localized on the MNIU, which decreases its ∠Fe–N–O angle by 10 degrees in response to the extra electron density. Subsequent reduction to the anionic species, S = 1, involves a major geometric change at the MNIU, which moves the Fe in {Fe(NO)} 8 out of the N 2 S 2 plane. Site-specific 15 N labeling of nitrosyl in the MNIU confirms the IR analysis and shows rapid NO exchange between the MNIU/DNIU (mono-nitrosyl iron unit/dinitrosyl iron unit) pairs during its synthesis at RT. Mössbauer spectroscopy, S K-edge XAS, and molecular orbital calculations confirm the ability of NO and the versatility of sulfur bridges to buffer and distribute electrons, a key to their major importance in metalloenzymes.

DNIC↗
DOE OSTI2025

The effects of photosynthetic rate on respiration in light, starch/sucrose partitioning, and other metabolic fluxes within photosynthesis

In the future, plants may encounter increased light and elevated CO 2 levels. How consequent alterations in photosynthetic rates will impact fluxes in photosynthetic carbon metabolism remains uncertain. Respiration in light ( R L ) is pivotal in plant carbon balance and a key parameter in photosynthesis models. Understanding the dynamics of photosynthetic metabolism and R L under varying environmental conditions is essential for optimizing plant growth and agricultural productivity. However, measuring R L under high light and high CO 2 (HLHC) conditions poses challenges using traditional gas exchange methods. In this study, we employed isotopically nonstationary metabolic flux analysis (INST-MFA) to estimate RL and investigate photosynthetic carbon flux, unveiling nuanced adjustments in Camelina sativa under HLHC. Despite numerous flux alterations in HLHC, RL remained stable. HLHC affects several factors influencing RL, such as starch and sucrose partitioning, v o /v c ratio, triose phosphate partitioning, and hexose kinase activity. Analysis of A/C i curve operational points reveals that HLHC’s major changes primarily stem from CO 2 suppressing photorespiration. Integration of these fluxes into a simplified model predicts changes in CBC labeling under HLHC. This study extends our prior discovery that incomplete CBC labeling is due to unlabeled carbon reimported during R L , offering insights into manipulating labeling through adjustments in photosynthetic rates.

Elevated CO2↗
DOE OSTI2022

La–Sr–Co oxide catalysts for oxygen evolution reaction in anion exchange membrane water electrolyzer: The role of electrode fabrication on performance and durability

Anion exchange membrane water electrolysis is an attractive technology for low-cost generation of “green” hydrogen by combining the use of noble metal-free catalysts with pure water feed. By thus addressing main drawbacks of the liquid alkaline electrolysis and proton exchange membrane water electrolysis, anion exchange membrane water electrolysis stands an excellent chance of replacing the two technologies. The development of active and stable platinum group metal (PGM)-free catalysts for oxygen evolution reaction (OER) is crucial for making anion exchange membrane water electrolyzers (AEMWEs) practical. For this work, we synthesized, characterized and tested two La–Sr–Co oxide-based OER catalysts. First, we characterized the catalysts by XRD, SEM, and N 2 physisorption and assessed their OER activity in a three-electrode cell. Next, we focused on electrode fabrication, demonstrating the importance of catalyst-ink application to the porous transport layers (PTLs) and a key role of adding a binder to the catalyst ink to prevent the catalyst detachment from the PTL in pure water. We tested three membrane electrode assemblies prepared using different formulations of the anode catalyst ink. The results show that the optimum ink formulation is essential for the performance on pure-water feed by maximizing OH - conductivity of the catalyst layer and catalyst-membrane interface.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Vegetation biogeography is a main source of uncertainty in modelling the land carbon cycle

The terrestrial biosphere exchanges a large amount of CO 2 with the atmosphere through photosynthesis and respiration, determining the magnitude of land carbon sink and consequently influencing the rate of global warming. The magnitudes of global photosynthesis and respiration, however, vary widely across models (100-200 PgC/year), constituting a key and persistent source of uncertainty in carbon cycle and climate modelling. Here, we argue that the uncertainty in the land carbon cycle modelling is largely attributable to the uncertainty in biogeography – the distribution of plant functional types (PFTs). Using an ensemble of dynamic global vegetation models (DGVMs), we find a strong dependence of total photosynthesis on total area for each PFT. The dependence allows us to reduce the spread of land carbon cycle estimates by ~75% using remote sensing-based PFT maps. We further find that 56 ± 21% of climate-driven changes in global photosynthesis modelled by DGVMs are caused by changes in PFT distribution in the last two decades. Our study identifies vegetation biogeography as a main controlling factor of uncertainty in land carbon cycle modelling and highlights the importance of biogeography-climate interactions in carbon cycle and climate studies.

Zhao, Ruiying [National Univ. of Singapore (Singap↗
DOE OSTI2020

Interpretative transport modeling of the WEST boundary plasma: main plasma and light impurities

Understanding impurity transport in tokamak plasmas is crucial to control radiative losses and material migration in future magnetic fusion reactors. In this work we deploy the SolEdge2D-EIRENE code to model the boundary plasma in a WEST discharge, satisfactorily reproducing measurements of both upstream and divertor plasma conditions. Additionally, the spatial distribution of oxygen, studied here as a representative light impurity, is compared to vacuum ultraviolet spectroscopy measurements acquired with an oscillating line of sight. The simulation captures a key feature of the experiment, namely a factor of sime2 higher oxygen brightness in the inner divertor region compared to the outer one. This spatial asymmetry in oxygen concentration is interpreted by analyzing the balance of friction forces and thermal gradient forces that the light impurity exchanges with the main plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Engineering Synthetic Anaerobic Consortia Inspired by the Rumen for Biomass Breakdown and Conversion

Lignocellulosic plant biomass is a widely-abundant renewable resource that can be harnessed for value-added production of fuels & chemicals. While microbes have been engineered to breakdown lignocellulose and turn released sugars into products, this remains an energy-intensive process that requires expensive pre-treatment and separation steps. Furthermore, it is difficult to engineer all desirable traits for breakdown and conversion into one organism. This project developed a new strategy that relies on microbial partnerships formed in the herbivore rumen to liberate sugars from crude plant biomass and convert that sugar to value-added chemicals. Microbial consortia consisting of fungi, bacteria, and archaea form tight associations in the herbivore rumen, which divide-and-conquer the difficult tasks of biomass breakdown. This project leveraged a “synthetic rumen” consortium composed of anaerobic fungi and chain-elongating bacteria to study which metabolites are shared and exchanged between microbes and identify strategies to bolster lignocellulose conversion to value-added products. Our approach developed high-throughput systems and synthetic biology approaches to realize stable synthetic consortia that route lignocellulosic carbon into short and medium chain fatty acids (SCFAs/MCFAs) rather than methane. Key research objectives were to (1) design and predict anaerobic fungal and bacterial consortia that efficiently convert lignocellulosic biomass into medium-chain fatty acids (MCFAs), (2) understand how fermentation parameters and microbe-microbe interactions regulate and drive microbiome metabolic fluxes, and (3) use genomic editing to alter the fermentation byproducts of anaerobic fungi and bolster MCFA titers and yields.

09 BIOMASS FUELS↗
DOE OSTI2023

Inferring the photolysis rate of NO 2 in the stratosphere based on satellite observations

NO and NO 2 (NO x ) play major roles in both tropospheric and stratospheric chemistry. This paper provides a novel method to obtain a global and accurate photolysis rate for NO 2 based on satellite data. The photolysis rate J(NO 2 ) dominates the daytime diurnal variation of NO x photochemistry. Here the spatial variation of J(NO 2 ) at 50–90°S in December from 20–40km is obtained using data from the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) experiment. Because NO and NO 2 rapidly exchange with one another in the daytime, J(NO 2 ) can be attained assuming steady state, and the results are shown to be consistent with model results. The J(NO 2 ) value decreases as the solar zenith angle increases and has a weak altitude dependence. A key finding is that satellite-derived J(NO 2 ) increases in the polar regions, in good agreement with model predictions, due to the effects of ice and snow on surface albedo. Thus, the method presented here provides an observation-based check on the role of albedo in driving polar photochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Data and scripts associated with “Allometric scaling of hyporheic respiration across basins in the Pacific Northwest USA"

This data package is associated with the publication “Allometric scaling of hyporheic respiration across basins in the Pacific Northwest USA” submitted to JGR-Biogeosciences (Regier et al. 2025).This study used reach-scale modeled estimates of hyporheic aerobic respiration made by the River Corridor Model (Fang et al. 2020) and watershed characteristics across the Willamette and Yakima River basins to explore potential allometric scaling (i.e., power-law relationships between size and function) of cumulative hyporheic respiration across catchment-to-basin scales. Scaling was explored quantitatively via the R2, slope, and y-intercept of relationships between cumulative hyporheic respiration and watershed area, divided into hyporheic exchange flux (HEF) quantiles. We also explored relationships between allometric scaling and other watershed characteristics through linear regression, spatial patterns, and mutual information analyses. Our results also suggest variability of hyporheic respiration allometry for middle exchange flux quantiles, and in relation to land-cover. Our findings provide initial evidence that allometric scaling may be useful for predicting hyporheic biogeochemical dynamics across watersheds from reach to basin scales. This data package is associated with the GitHub repository found at https://github.com/peterregier/rc_wrb_yrb_scaling. The data package is organized into several key directories. The “data” folder contains multiple CSV files, including landscape heterogeneity, scaling analysis, and watershed boundary data. The “figures” folder has all figure files in both PDF and PNG formats. Core analysis scripts and figure generation scripts are in the “scripts” directory, systematically numbered for sequential execution. The root directory includes essential project files; please see the file ending in “flmd.csv” for a list and description of all files contained in this data package and the file ending in “dd.csv” for data dictionaries used to describe tabular column headers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Assessing the hygrothermal performance of bio-based materials in building wall systems

Building envelope systems are crucial in regulating thermal and moisture exchange between interior and exterior environments, accounting for approximately 28 % of building energy consumption in the United States with walls being the primary contributors. Improper selection of building envelope materials can lead to moisture-related issues, reduced resilience, and compromised durability. Hygrothermal performance assessment is a key factor in efficient building design. As such, improving the energy and hygrothermal performance of opaque wall materials, through careful assessment of material choices, is essential to enhancing building resilience, lowering energy costs, and improving occupant comfort. As the building industry seeks new strategies to reduce material energy intensity, bio-based materials emerge as a promising solution. However, their long-term hygrothermal performance in building envelope systems remains underexplored. To fill this gap, this study evaluates the hygrothermal behavior of 13 bio-based materials in residential wall systems across three U.S. climate zones. Laboratory experiments were performed to measure material properties such as density, thermal conductivity, moisture transmission, and sorption isotherms. These data were integrated into the WUFI® simulation tool to assess wall hygrothermal performance in Houston, Baltimore, and Chicago. A three-phase modeling approach was used: (1) baseline residential walls with oriented strand board (OSB) and gypsum board; (2) replacing OSB with bio-based materials; and (3) replacing drywall with bio-based materials. Results showed that the evaluated bio-based materials maintained acceptable moisture thresholds of ≤ 16 % across all climates, confirming their viability as an alternative for current sheathing materials. Furthermore, this study provides a foundation for future research and innovation in material science on the use of certain bio-based materials in high-performance, low energy use residential construction. Ultimately, providing critical data, offering a database of bio-based material properties, and supplying a simulation-based approach will help designers make informed decisions for future efficient building practices.

Bio-based materials↗