Search NASA⌕ Search

SEARCH · Search NASA

Results for “kinetic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Progress in modeling hydrogen assisted ammonia oxidation with new experiments and a further reconciliation of the NH 3 + OH rate constant

Hydrogen-assisted oxidation of ammonia in a premixed, laminar flow tubular reactor under reducing conditions was investigated experimentally and through chemical kinetic modeling. Due to its impact on the competition for OH among ammonia and hydrogen, the rate constant for NH 3 + OH (R1) was determined through state-of-the-art theoretical kinetics calculations, employing composite energies that include the effects of higher order electronic excitations on the electronic energies along the variational reaction path and treating the limitations in the kinetics posed by the passage through a hydrogen-bonded complex. The resulting rate constant was in close agreement with the recent experimental value from Zaczek et al. (2025), settling a long-term dispute about the high-temperature value of k 1 and confirming within 20% the value previously used in modeling. The chemical kinetic model, with no other changes, captured well measured concentrations of NH 3 , H 2 , NO, and N 2 O from flow reactor oxidation of NH 3 /H 2 at slightly reducing conditions over a range of temperature (900-1350 K) and NH 3 /H 2 ratios (0.5-2.0). Comparison of the present results with reported data from a non-premixed setup indicates that for laminar flow tubular reactors, the reactor configuration may have implications for the observed H 2 consumption due to the possibility of preferential oxidation during mixing.

Ab initio theory↗
DOE OSTI2022

Data-driven, multi-moment fluid modeling of Landau damping

Deriving governing equations of complex physical systems based on first principles can be quite challenging when there are certain unknown terms and hidden physical mechanisms in the systems. In this work, we apply a deep learning architecture to learn fluid partial differential equations (PDEs) of a plasma system based on the data acquired from a fully kinetic model. Here, the learned multi-moment fluid PDEs are demonstrated to incorporate kinetic effect such as Landau damping. Based on the learned fluid closure, the data-driven, multi-moment fluid modeling can well reproduce all the physical quantities derived from the fully kinetic model. The calculated damping rate of Landau damping is consistent with both the fully kinetic simulation and the linear theory. The data-driven fluid modeling of PDEs for complex physical systems may be applied to improve the fluid closure and reduce the computational cost of multi-scale modeling of global systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Elucidating the Mechanism for the Reaction of $o$-Phthalaldehyde with Primary Amines in the Presence of Thiols

The use of o-phthalaldehyde (OPA) in combination with a thiol reagent is a common method for detecting primary amines in amino acids, peptides, and proteins. Despite its widespread use, the exact reaction mechanism has been debated since the 1980s. Here, we measure the kinetics of the reaction between OPA, alanine, and a dithiol (1,4-dithiolthreitol, DTT) as a function of pH and reagent concentration. Using these new measurements and accompanying kinetic models, we find evidence that the pH dependence of the kinetics arises from both the protonation states of alanine and DTT, the hydration state of OPA, and the unproductive equilibrium with DTT, all of which are pH-dependent. Importantly, these results support the mechanism originally proposed by Sternson [Rational design and evaluation of improved o-phthalaldehyde-like fluorogenic reagents. Anal. Biochem. 1985, 144, 233–246] and Wong [Reaction of o-phthalaldehyde with alanine and thiols: kinetics and mechanism. J. Am. Chem. Soc. 1985, 107, 6421–6422], in which the primary amine first reacts with OPA, followed by a reaction with the thiol to form the fluorescent isoindole product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multiscale Reactive Model for 1,3,5-Triamino-2,4,6-trinitrobenzene Inferred by Reactive MD Simulations and Unsupervised Learning

When high-energy-density materials are subjected to thermal or mechanical insults at extreme conditions (shock loading), a coupled response between the thermo-mechanical and chemical behaviors is systematically induced. Herein we develop a reaction model for the fast chemistry of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) at the mesoscopic scale, where the chemical behavior is determined by underlying microscopic reactive simulations. The slow carbon cluster formation is not discussed in the present work. All-atom reactive molecular dynamics (MD) simulations are performed with the ReaxFF potential, and a reduced-order chemical kinetics model for TATB is fitted to isothermal and adiabatic simulations of single crystal chemical decomposition. Unsupervised machine learning techniques based on non-negative matrix factorization are applied to MD trajectories to model the decomposition kinetics of TATB in terms of a four-component model. The associated heats of reaction are fit to the temperature evolution from adiabatic decomposition trajectories. Using a chemical species analysis, we show that non-negative matrix factorization captures the main chemical decomposition steps of TATB and provides an accurate estimation of their evolution with temperature. The final analytical formulation, coupled to a diffusion term, is incorporated into a continuum formalism, and simulation results are compared one-to-one against MD simulations of 1D reaction propagation along different crystallographic directions and with different initial temperatures. A good agreement is found for both the temporal and spatial evolution of the temperature field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Evaluating Possible Formation Mechanisms of Criegee Intermediates during the Heterogeneous Autoxidation of Squalene

Organic molecules in the environment oxidatively degrade by a variety of free radical, microbial, and biogeochemical pathways. A significant pathway is heterogeneous autoxidation, in which degradation occurs via a network of carbon and oxygen centered free radicals. Recently, we found evidence for a new heterogeneous autoxidation mechanism of squalene that is initiated by hydroxyl (OH) radical addition to a carbon–carbon double bond and apparently propagated through pathways involving Criegee Intermediates (CI) produced from β-hydroxy peroxy radicals (β-OH-RO 2 •). It remains unclear, however, exactly how CI are formed from β-OH-RO 2 •, which could occur by a unimolecular or bimolecular pathway. Combining kinetic models and multiphase OH oxidation measurements of squalene, we evaluate the kinetic viability of three mechanistic scenarios. Scenario 1 assumes that CI are formed by the unimolecular bond scission of β-OH-RO 2 •, whereas Scenarios 2 and 3 test bimolecular pathways of β-OH-RO 2 • to yield CI. Scenario 1 best replicates the entire experimental data set, which includes effective uptake coefficients vs [OH] as well as the formation kinetics of the major products (i.e., aldehydes and secondary ozonides). Finally, although the unimolecular pathway appears to be kinetically viable, future high-level theory is needed to fully explain the mechanistic relationship between CI and β-OH-RO 2 • in the condensed phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Plasma-assisted catalysis for ammonia synthesis in a dielectric barrier discharge reactor: key surface reaction steps and potential causes of low energy yield

Ammonia synthesis experiments were carried out in a coaxial dielectric barrier discharge (DBD) reactor packed with several different supports and metal catalysts. There was a marked increase in the reaction rate, over that obtained in an empty DBD plasma reactor, upon introduction of a packed bed of γ-Al 2 O 3 , Ru/γ-Al 2 O 3 , or SiO 2 particles. The difference in the reaction rates over γ-Al 2 O 3 and Ru/γ-Al 2 O 3 was minimal. Complementary zero-dimensional plasma kinetic model analysis was also performed using inputs from experimental data. This kinetic analysis allowed for gas phase reactions, Eley–Rideal (E–R) reactions, and direct adsorption of radical species on the γ-Al 2 O 3 surface. On the metal surface, dissociative adsorption of N 2 and H 2 , and Langmuir–Hinshelwood reactions were also included. This analysis revealed that, under the conditions of our experiments, ammonia synthesis proceeds principally by the formation of reactive radicals in the gas phase, which then adsorb and participate in E–R reactions on both the metal and support material surfaces. Furthermore, this finding illustrates a challenge for substantially increasing the energy yield for plasma-assisted ammonia synthesis in typical DBD reactors containing packed catalyst beads.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Probing High-Temperature Amine Chemistry: Is the Reaction NH 3 + NH 2 ⇌ N 2 H 3 + H 2 Important?

The reaction NH 3 + NH 2 ⇌ N 2 H 3 + H 2 (R1) has been identified as a key step to explain experimental results for pyrolysis and oxidation of ammonia. However, no direct experimental or theoretical evidence for the reaction has been reported. In the present work, the reaction was studied by ab initio theory and by reinterpretation of experimental data. We could not locate a transition state for R1 occurring as a direct process, but alternative mechanisms yielded an upper bound to k 1 of 1.5 × 10 13 exp(–58.9 kcal mol –1 /RT) cm 3 mol –1 s –1 over 1000–2500 K, several orders of magnitude lower than values applied in modeling. Consistent with the theoretical work, re-evaluation of NH 3 pyrolysis data supported a very low value of k 1 . However, this finding opens up a novel unresolved issue. Current kinetic models cannot capture the NH 3 oxidation behavior in a number of laminar flow reactor and jet-stirred reactor experiments without adopting an improbably high value for k 1 . Furthermore, important oxidation steps might be underestimated or missing from mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Observation and Modeling of the Thermal Runaway of High-Capacity Pouch Cells Due to an Internal Short Induced by an Indenter

Owing to the complexity of coupling mechanical and electrical solvers for finite element analysis (FEA) of mechanical abuse of a battery, the simulation should be performed by incorporating a local short circuit model activated based on the status of battery elements. However, the approach should also consider various other conditions of the battery simulated, such as the initial state of charge (SOC), for precise simulations of the internal short. This study proposes an approach developed with a mechanical model and single-particle battery model, along with a reaction kinetics model for thermal abuse using LS-DYNA. Several key parameters were selected, such as the activation criteria, kinetic abuse and element integration points during the internal short circuit induced by the indenter. The impact of these key parameters in the FEA on thermal runaway response for various initial SOCs from 25 to 100 % were analyzed. The FEA results obtained were compared against experimental results with various parameters such as activation criterion of internal short, kinetic abuse based on accelerating rate calorimetry (ARC) data. Finally, the root causes of the discrepancy between the FEA and experimental results are discussed regarding integration point what solver can make difference during calculation.

ENERGY STORAGE↗
DOE OSTI2020

Inorganic Sulfur Species Formed upon Heterogeneous OH Oxidation of Organosulfates: A Case Study of Methyl Sulfate

In this report recent studies reveal that organosulfates at the particle surface can be oxidized by gas-phase OH radicals with significant rates. Inorganic sulfur species, such as the bisulfate ion (HSO 4 - ) and sulfate ion (SO 4 2- ), can be formed upon these heterogeneous oxidation processes through the formation and subsequent reactions of sulfate radical anions (SO 4 •- ) in the particle phase. However, the amount of inorganic sulfur species produced in these heterogeneous oxidation reactions is not known. We investigate the heterogeneous OH oxidation of sodium methyl sulfate (CH 3 SO 4 Na), the smallest organosulfate detected in atmospheric particles, using an oxidation flow reactor at a relative humidity of 75%. We quantify the kinetics by measuring the decay of CH 3 SO 4 Na and the amount of HSO 4 - and SO 4 2- formed upon oxidation using ion chromatography. Kinetic measurements determine the heterogeneous OH reaction rate to be (5.72 ± 0.14) x 10 -13 cm 3 molecule -1 s -1 , with an effective OH uptake coefficient, γ eff , of 0.31 ± 0.06. The molar yield of inorganic sulfur species, defined as the total number of moles of HSO 4 - and SO 4 2- formed per mole of CH 3 SO 4 Na consumed upon oxidation, is found to be significant and has an average value of 0.62 ± 0.18 upon oxidation. A kinetic model is developed to describe the kinetics and inorganic sulfur species formation upon oxidation. Model simulations suggest that CH 3 SO 4 Na tends to decompose rapidly into formaldehyde and SO 4 •- , and the reaction of SO 4 •- with CH 3 SO 4 Na plays a significant role in both governing the kinetics and the formation of inorganic sulfur species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Accelerated Steam Methane Reforming by Dynamically Applied Charges

Catalyst design has traditionally focused on tuning active site properties to optimally bind reaction intermediates and balance the kinetic requirements of multiple competing chemical processes, as necessitated by the Sabatier principle. It has recently been proposed that for reactions following certain potential energy landscapes, the activity limit imposed by the Sabatier principle may be overcome by using programmed oscillations of surface electron density at the timescales of surface reactions (i.e., “catalytic resonance”). Here, we use a combination of density functional theory (DFT) simulations and transient kinetic models (TKMs) to simulate the kinetics of steam methane reforming (SMR) on Ru(211) surfaces under statically and dynamically applied charges. DFT-calculated binding energies of SMR intermediates and transition states exhibit strong sensitivity to positively applied charges and follow unique scaling relationships that deviate from linear periodic trends across transition metals. Our simulations demonstrate that applying a small positive charge to Ru dramatically enhances the steady-state turnover frequency (TOF) of SMR by up to 5 orders of magnitude above the TOF observed over neutral Ru. Thus, statically charging Ru catalysts may be an effective strategy to lower the temperature requirements for SMR. Dynamic square-wave oscillations in charge resulted in SMR catalytic resonance with an onset frequency f ∼ 106 Hz and the corresponding average TOFs exceeding the statically charged Ru surface by an additional 15%. Here, based on sensitivity analyses performed for the two end points of oscillation, we propose that dynamic TOF improvement beyond the Sabatier maximum can be expected when the system oscillates between two kinetic regimes that are uniquely controlled by distinct elementary steps.

Catalysts↗
DOE OSTI2022

Integrated Computational Materials and Mechanical Modeling for Additive Manufacturing of Alloys with Graded Structure Used in Fossil Fuel Power Plants

Wire-arc additive manufacturing (WAAM) has demonstrated its unique capability of producing large-size alloy components with a significantly reduced fabrication time and enhanced geometry design freedom. In this project, the team has developed an ICME (Integrated Computational Materials Engineering) modeling framework, which supports the WAAM of the AUSC (Advanced Ultra-Supercritical) power plant components. The manufacturing design has been applied to Inconel 740H, steel P91, as well as the dissimilar alloy components between steel P91 and Inconel 740H. The ICME model framework is developed by considering two types of modeling. First, mechanistic modeling has been applied to control the printing quality and understand the sequence of the dissimilar printing of the wall structure. The following models have been included in the developed ICME framework: finite element thermal model, grain structure model, residual stress simulation, crystal plasticity model, CALPHAD-based precipitation kinetic model, phase stability prediction, thermal expansion predictive model, and heuristic creep model. Secondary, a physics-based machine learning model has also been developed based on the ICME model structure. The machine learning model development is based on the ICME model prediction with calibration of the experiments. In addition, the WAAM has been utilized as a high-throughput experimental tool rapidly generating a gradient of alloy composition to facilitate experimental database generation for process-structure-property relationships. Such a database directly supported the ICME-enhanced machine learning, which further assisted in intermediate composition block design between P91 and 740H. A high-throughput screening study of the oxidation resistance has been performed based on such high-throughput experimentation. Based on the computational design, several dissimilar alloy manufacturing with post-heat treatment have been performed with a comprehensive evaluation of mechanical performance, including hardness mapping, yield strength, creep resistance. In this project, the single component of P91 and 740H processed by WAAM after heat treatment designed by ICME has demonstrated higher performance in yield strength and creep resistance than the wrought materials. The P91 sample prepared by WAAM with ICME-designed heat treatment performs better than P92 in creep resistance. The designed graded alloy printing with intermediate block shows a promising performance that exceeds the traditional welding. Moreover, the current research indicates the high need for location-specific design analysis with uncertainty quantification, an important topic that deserves more dedicated research. The achievement of this project demonstrated the promising future of WAAM in structural alloy manufacturing for energy power plant development. Successful printing requires synergetic efforts made by manufacturing, mechanical, and materials sciences.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

LDRD Abbreviated report: High-Order General-Discrete-Ordinates Method Enabling Efficient Deterministic Transport in Hydrodynamic Simulations

Deterministic transport simulations for national-security and energy applications often operate in high-dimensional phase-space, where accuracy and cost both become major challenges. A common numerical artifact in such problems is the “ray-effect,” which appears as unphysical streaks. Beyond misinterpretation, these artifacts can contaminate tightly coupled physics, such as fluid dynamics, radiation-hydrodynamics, and laser-plasma interactions, eroding the predictive capability of entire multiphysics workflows. Our objective was to make high-dimension studies practical on modern hardware while mitigating the ray-effect without relying on prohibitively expensive sampling approaches such as Monte Carlo methods. We developed the Generic Discretization Library (GenDiL), a Graphics Processing Unit (GPU)-first framework that uses high-order Discontinuous Galerkin (DG) methods and matrix-free algorithms to reduce memory usage and improve computational efficiency, critical for phase-space simulations. GenDiL supports phase-space adaptivity in both mesh size and polynomial order (hp-adaptivity) to place resolution only where it is needed. A central capability is Local Dimensional Refinement (LDR), which couples lower-dimension continuum models to higher-dimension kinetic models through stable and conservative interfaces, so that high-fidelity physics is applied only in regions where it is essential. Building on the GenDiL framework, we developed the General SN (GSN) family of algorithms as a true generalization of the polar SN approach (discrete ordinates, often denoted SN). Rather than tying discrete ordinates to a specific polar change of coordinates, GSN formulates transport on an arbitrary change of coordinates chosen to reduce ray-effect. We studied two complementary variants: an analytic variant, where the coordinate map is prescribed in advance by a closed-form function; and a data-driven variant, where a quantity of interest, such as the net flux, guides the coordinate system. GenDiL provides the library infrastructure for efficient GPU execution, but the GSN concept is algorithmic and independent of any one library. Across representative high-dimension tests, including non-symmetric solutions, both variants delivered strong ray-effect mitigation at practical cost, moving four- to six-dimensional analysis toward repeatable, routine studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Biological evaluation of Keggin‐type polyoxometalates on tyrosinase: Kinetics and molecular modeling

Abstract Abnormal overexpression of tyrosinase activity can lead to the production of hyperpigmentation in human skin and enzymatic browning in fruits and vegetables. Herein, the inhibition and mechanism of the H 3 PMo 12 O 40 and two transition metal‐substituted Keggin‐type polyoxometalates (Na 7 PMo 11 CoO 40 and Na 7 PMo 11 ZnO 40 ) on tyrosinase were studied by kinetics and molecular modeling. Kinetic studies indicated that all compounds had more potent inhibitory activities than standard arbutin, and H 3 PMo 12 O 40 (IC 50 = 0.443 ± 0.006 m m ) is ~15‐fold stronger inhibition than arbutin. Additionally, all compounds inhibited tyrosinase in a reversible competitive manner. Intriguingly, molecular modeling elucidated that three compounds competitively bind to tyrosinase mainly through more interactions with Cu 2+ ions and the amino acid residue capable of forming cation‐π and hydrogen bonding, forming a reversible non‐covalent complex. Molecular simulation study correlated well with the biological activity of three compounds in vitro. This work provided new insights into design and synthesis of polyoxometalates as tyrosinase inhibitors in the field of medicine, cosmetic, and food.

Chi, Guoxiang↗
DOE OSTI2021

Measurements of Intermediate Species in Fuel-Rich Oxidation of Ethylene, Toluene, and n -Decane

Polycyclic aromatic hydrocarbons (PAHs) are important precursors to the formation of soot and are also pollutant emissions from combustion devices, including internal combustion engines. To understand the formation of PAHs, the low-molecular-weight hydrocarbon chemistry leading to their formation needs to be understood. Toward this goal, fuel-rich oxidation of three different hydrocarbons, i.e., ethylene, toluene, and n-decane, has been investigated in an atmospheric pressure flow reactor at varying temperatures (1000–1350 K), equivalence ratios (φ = 3.0–12.0), and residence times of 0.25–1.5 s. The major C 1 to C 7 intermediates, such as methane, acetylene, ethylene, allene, propyne, propylene, vinylacetylene, 1,3-butadiene, cyclopentadiene, benzene, and toluene, were quantified using a gas chromatograph equipped with a flame ionization detector. The experimental tendency of intermediate species formation, e.g., the dependence of temperature, equivalence ratio, and residence time, was similar in ethylene oxidation and n-decane oxidation. The concentrations of intermediate species up to C 4 were higher in ethylene/n-decane oxidation than toluene oxidation, while a nearly equal or larger amount of C5–C7 species was produced in toluene oxidation. The experimental data were compared with modeling results using a detailed chemical kinetic mechanism. The calculated data using the kinetic model were in agreement with the experimental results. Additionally, a comprehensive kinetic analysis on the reaction pathways of each species was conducted to assess the differences in the oxidation chemistry with the change in the structure of hydrocarbons. In particular, in-depth analysis of benzene formation was performed, elucidating that two benzene formation pathways were important in ethylene and n-decane oxidation: (1) H elimination of the 2,4-cyclohexadienyl radical produced from the isomerization of the 2,4-cyclopentadienylmethyl radical, and (2) dehydrogenation of cyclohexadiene produced from reactions of vinyl radical with 1,3-butadiene. In toluene oxidation, it was found that benzene was primarily produced from toluene through the replacement of the methyl group with hydrogen.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

A purely kinetic description of the evaporation of water droplets

The process of water evaporation, although deeply studied, does not enjoy a kinetic description that captures known physics and can be integrated with other detailed processes such as drying of catalytic membranes embedded in vapor-fed devices and chemical reactions in aerosol whose volumes are changing dynamically. In this work, we present a simple, three-step kinetic model for water evaporation that is based on theory and validated by using well-established thermodynamic models of droplet size as a function of time, temperature, and relative humidity as well as data from time-resolved measurements of evaporating droplet size. Additionally, the kinetic mechanism for evaporation is a combination of two limiting processes occurring in the highly dynamic liquid-vapor interfacial region: direct first order desorption of a single water molecule and desorption resulting from a local fluctuation, described using third order kinetics. The model reproduces data over a range of relative humidities and temperatures only if the interface that separates bulk water from gas phase water has a finite width, consistent with previous experimental and theoretical studies. The influence of droplet cooling during rapid evaporation on the kinetics is discussed; discrepancies between the various models point to the need for additional experimental data to identify their origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dehydroxylation kinetics of kaolinite and montmorillonite examined using isoconversional methods

The use of calcined clays as supplementary cementitious materials (SCMs) in concrete is a promising strategy towards decarbonizing the cement and concrete industry. This is especially relevant considering the ever-increasing demand for concrete. Comprehensive understanding of the kinetics of calcination is essential towards maximizing the potential reactivity of clay minerals while ensuring energy efficiency. In this study, the kinetics of the dehydroxylation of kaolinite and montmorillonite are investigated under non-isothermal conditions at constant heating rate. Activation energies ( E a ) are determined via Friedman differential and advanced Vyazovkin incremental methods over the isoconversional range; these are devoid of computational approximations, thus allowing kinetic analysis without assuming a specific reaction model. Kinetic equations—in the differential form as well as a combination of differential and integral forms are compared against the experimentally determined reaction models to identify the most probable dehydroxylation mechanism for kaolinite and montmorillonite. A reaction order mechanism is established for dehydroxylation of kaolinite, while montmorillonite is noted to undergo dehydroxylation via a single-step reversible diffusion-controlled process. Kinetic triplet—comprising activation energy, reaction model and pre-exponential factor—is used to predict isothermal calcination conditions, which is further verified using analytical techniques. Heat release rates of clay-portlandite blends from isothermal calorimetry are used within a thermodynamic framework to quantify reactivity of the calcined clays. Here, the study demonstrates a general approach based on isoconversional methods to predict calcination conditions for different clays that can be used in efficient and optimized production of blended cements or SCMs.

36 MATERIALS SCIENCE↗