Inflight and ground-based simulation of handling qualities of very large airplanes in landing approach
Inflight and ground based simulation of Boeing 367-80 variable stability aircraft handling qualities during landing approach
BOEING 707 AIRCRAFT↗
SEARCH · Search NASA
Results for “land simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Simulation of an automatically-controlled STOL aircraft in a microwave landing system multipath environment
The simulated response is described of a STOL aircraft to Microwave Landing System (MLS) multipath errors during final approach and touchdown. The MLS azimuth, elevation, and DME multipath errors were computed for a relatively severe multipath environment at Crissy Field California, utilizing an MLS multipath simulation at MIT Lincoln Laboratory. A NASA/Ames six-degree-of-freedom simulation of an automatically-controlled deHavilland C-8A STOL aircraft was used to determine the response to these errors. The results show that the aircraft response to all of the Crissy Field MLS multipath errors was small. The small MLS azimuth and elevation multipath errors did not result in any discernible aircraft motion, and the aircraft response to the relatively large (200-ft (61-m) peak) DME multipath was noticeable but small.
Toda, M.↗
A comparison of flight and simulation data for three automatic landing system control laws for the Augmentor wing jet STOL research airplane
Automatic flare and decrab control laws for conventional takeoff and landing aircraft were adapted to the unique requirements of the powered lift short takeoff and landing airplane. Three longitudinal autoland control laws were developed. Direct lift and direct drag control were used in the longitudinal axis. A fast time simulation was used for the control law synthesis, with emphasis on stochastic performance prediction and evaluation. Good correlation with flight test results was obtained.
Feinreich, B.↗
Fast and Precise Trajectory Simulation for Entry, Descent, and Landing Using A Multi-Model Monte Carlo Approach
Predicting landing radius and other quantities of interest (QoI) for entry, descent, and landing (EDL) applications requires a viable uncertainty propagation method for quantifying the impact of uncertainties in wind pattern variations, atmospheric uncertainties, etc. While standard MC simulation is the defacto standard for providing robust and unbiased predictions,it is often infeasible for expensive, high-fidelity EDL models. Low-fidelity models are commonly constructed to replace the high-fidelity model in MC simulation for computational speedup,but at the expense of accuracy and unbiasedness. Emerging multi-model MC methods are bridging this gap by combining predictions from two or more models of varying fidelity and computational cost for efficient and unbiased uncertainty propagation. This work explores the use of multi-model MC for increasing the speed and precision of trajectory simulation for EDL. It is shown that combining a high-fidelity EDL model with low-fidelity models (e.g,data-driven, reduced physics) yields substantial computational speedup versus standard MCwith only the high-fidelity model. Moreover, the unbiasedness of multi-model MC predictions is highlighted by showing increased accuracy versus an approach that leverages a low-fidelity surrogate model alone.
James E. Warner↗
Fixed base simulator study of an externally blown flap STOL transport airplane during approach and landing
A fixed-base simulator study was conducted to determine the flight characteristics of a representative STOL transport having a high wing and equipped with an external-flow jet flap in combination with four high-bypass-ratio fan-jet engines during the approach and landing. Real-time digital simulation techniques were used. The computer was programed with equations of motion for six degrees of freedom and the aerodynamic inputs were based on measured wind-tunnel data. A visual display of a STOL airport was provided for simulation of the flare and touchdown characteristics. The primary piloting task was an instrument approach to a breakout at a 200-ft ceiling with a visual landing.
Grantham, W. D.↗
Utilizing 3D-DIC on Mars 2020 Rover Wheel Assembly: Test-Analysis Correlation
Following the successful implementation of full-field photogrammetry, more specifically three-dimensional Digital Image Correlation (3D-DIC), on the Mars 2020 Heat Shield Structural Failure Review assessment, 3D-DIC was selected as one of the primary measurement techniques for the Mars 2020 Rover wheel assembly qualification test at the NASA Jet Propulsion Laboratory (JPL). To validate the Rover wheel landing loads simulations, it was extremely important to have high confidence in the wheel models. Due to the large deformations and strains that the wheel would be subject to during landing, traditional instrumentation such as linear variable displacement transducers (LVDTs), electrical-resistance strain gages and string potentiometers, would not be sufficient on their own to provide all the necessary validation data. Therefore, the NASA Engineering and Safety Center (NESC) provided the 3D-DIC expertise and support to measure the high deformation and strain in the wheel flexures and qualify the overall structural response of the Mars 2020 rover wheel assembly. There were two key objectives for the photogrammetry technique: (1) monitor the wheel response in real-time, guarding against anomalous behavior and failure, and (2) provide test data for test-analysis correlation to validate and/or improve the high-fidelity computational model. The contents of this paper will focus on the challenges of applying 3D-DIC to the Mars 2020 Rover wheel assembly and how these challenges were overcome. Examples of test-analysis correlation during the stiffness characterization and structural qualification will be presented and discussed in detail. Experimental results were compared with the analysis and showed excellent agreement between the predicted behavior and helped validate the high-fidelity models.
Mars 2020 Rover Wheel↗
Moving-base simulation evaluation of thrust margins for vertical landing for the NASA YAV-8B Harrier aircraft
A simulation experiment was conducted on Ames Research Center's Vertical Motion Simulator to evaluate the thrust margin for vertical landing required for the YAV-8B Harrier. Two different levels of ground effect were employed, representing the aircraft with or without lift improvement devices installed. In addition, two different inlet temperature profiles were included to cover a wide range of hot gas ingestion. For each ground effect and hot gas ingestion variant, vertical landings were performed at successively heavier weights, with the pilot assessing the acceptability of the operation in each case. Results are presented as a function of hover weight ratio and a metric of the mean ground effect and ingestion that reflect the increase in thrust margin required to provide acceptable control of sink rate during the descent to touchdown with increasing suck down and hot gas ingestion.
Franklin, James A.↗
A piloted simulator investigation of ground effect on the landing maneuver of a large, tailless, delta-wing airplane
Piloted simulator investigation of ground effect on landing maneuver of large, tailless, delta wing airplane
Drinkwater, F. J., III↗
Evaluation of Flying Qualities and Guidance Displays for an Advanced Tilt-Wing STOL Transport Aircraft in Final Approach and Landing
A piloted simulation was performed on the Vertical Motion Simulator at NASA Ames Research Center to evaluate flying qualities of a tilt-wing Short Take-Off and Landing (STOL) transport aircraft during final approach and landing. The experiment was conducted to assess the design s handling qualities, and to evaluate the use of flightpath-centered guidance for the precision approach and landing tasks required to perform STOL operations in instrument meteorological conditions, turbulence, and wind. Pilots rated the handling qualities to be satisfactory for all operations evaluated except those encountering extreme crosswinds and severe windshear; even in these difficult meteorological conditions, adequate handling qualities were maintained. The advanced flight control laws and guidance displays provided consistent performance and precision landings.
Frost, Chad R.↗
Flight evaluations of several hover control and display combinations for precise blind vertical landings
Several control and display concepts were evaluated on a variable-stability helicopter prior to future evaluations on a modified Harrier. The control and display concepts had been developed to enable precise hover maneuvers, station keeping, and vertical landings in simulated zero-visibility conditions and had been evaluated extensively in previous piloted simulations. Flight evaluations early in the program revealed several inadequacies in the display drive laws that were later corrected using an alternative design approach that integrated the control and display characteristics with the desired guidance law. While hooded, three pilots performed landing-pad captures followed by vertical landings with attitude-rate, attitude, and translation-velocity-command control systems. The latter control system incorporated a modified version of state-rate-feedback implicit-model following. Precise landing within 2 ft of the desired touchdown point were achieved.
Schroeder, J. A.↗
Activation of nuclear transcription factor-kappaB in mouse brain induced by a simulated microgravity environment
Microgravity induces inflammatory responses and modulates immune functions that may increase oxidative stress. Exposure to a microgravity environment induces adverse neurological effects; however, there is little research exploring the etiology of these effects resulting from exposure to such an environment. It is also known that spaceflight is associated with increase in oxidative stress; however, this phenomenon has not been reproduced in land-based simulated microgravity models. In this study, an attempt has been made to show the induction of reactive oxygen species (ROS) in mice brain, using ground-based microgravity simulator. Increased ROS was observed in brain stem and frontal cortex with concomitant decrease in glutathione, on exposing mice to simulated microgravity for 7 d. Oxidative stress-induced activation of nuclear factor-kappaB was observed in all the regions of the brain. Moreover, mitogen-activated protein kinase kinase was phosphorylated equally in all regions of the brain exposed to simulated microgravity. These results suggest that exposure of brain to simulated microgravity can induce expression of certain transcription factors, and these have been earlier argued to be oxidative stress dependent.
Non-NASA Center↗
Comparison of longwave diurnal models applied to simulations of the Earth Radiation Budget Experiment
The Earth Radiation Budget Experiment (ERBE) is a multisatellite experiment which is to be implemented in the mid 1980s. The experiment involves a utilization of instruments on one or more sun-synchronous satellites in the NOAA series, and the employment of a dedicated spacecraft, the ERBS, in a 57 deg orbit. One of the objectives of ERBE is related to an improvement of knowledge regarding the diurnal variability in the earth's radiation balance. In the present investigation, satellite samples of longwave (LW) radiation over land are simulated for both sun-synchronous and non-sun-synchronous orbits. Three different LW diurnal models are then applied to the sampled data, and the resulting modeled monthly net LW radiant exitances are compared against reference values based on complete hourly sampling of the area for a month. The results demonstrate the general usefulness of a trigonometric diurnal LW model for land regions with daytime heating trends.
Brooks, D. R.↗
Improvements to the Flight Analysis and Simulation Tool (FAST) and Initial Development of the Genesis Flight Mechanics Simulation for Ascent, Aerocapture, Entry, Descent, and Landing (A2EDL) Trajectory Design
The NASA Engineering and Safety Center (NESC) was requested to provide significant enhancements to the Flight Analysis and Simulation Tool (FAST), a generic, variable-degree-of-freedom, multi-body ascent, aerocapture, entry, descent, and landing (A2EDL) flight simulation code and a key Agency analysis tool. This report details the upgrades to FAST that were completed, describes a change to the assessment’s scope that allowed its goals to be exceeded with a new and innovative approach, and discusses the results of the modified approach.
NASA Engineering and Safety Center; Flight Analysi↗
Aeroacoustic Computations of a Generic Low Boom Concept in Landing Configuration: Part 3 - Aerodynamic Validation and Noise Source Identification
Explore the source record for details and available documents.
low boom↗
Bioelectric Control of a 757 Class High Fidelity Aircraft Simulation
This paper presents results of a recent experiment in fine grain Electromyographic (EMG) signal recognition, We demonstrate bioelectric flight control of 757 class simulation aircraft landing at San Francisco International Airport. The physical instrumentality of a pilot control stick is not used. A pilot closes a fist in empty air and performs control movements which are captured by a dry electrode array on the arm, analyzed and routed through a flight director permitting full pilot outer loop control of the simulation. A Vision Dome immersive display is used to create a VR world for the aircraft body mechanics and flight changes to pilot movements. Inner loop surfaces and differential aircraft thrust is controlled using a hybrid neural network architecture that combines a damage adaptive controller (Jorgensen 1998, Totah 1998) with a propulsion only based control system (Bull & Kaneshige 1997). Thus the 757 aircraft is not only being flown bioelectrically at the pilot level but also demonstrates damage adaptive neural network control permitting adaptation to severe changes in the physical flight characteristics of the aircraft at the inner loop level. To compensate for accident scenarios, the aircraft uses remaining control surface authority and differential thrust from the engines. To the best of our knowledge this is the first time real time bioelectric fine-grained control, differential thrust based control, and neural network damage adaptive control have been integrated into a single flight demonstration. The paper describes the EMG pattern recognition system and the bioelectric pattern recognition methodology.
Jorgensen, Charles↗
Improving Simulation of Irrigation in a Global Land Surface Model
Studies have shown that irrigated agriculture has substantial effects on local to regional hydrologic and atmospheric processes. These effects include increased evapotranspiration and near surface humidity, decreased air and ground temperature, augmented downwind precipitation, enhanced recharge, depletion of source water stocks, and overall changes to the regional water budget. However, developers of global offline and coupled modeling systems have been slow to incorporate irrigation. This presentation will describe progress towards simulating irrigation worldwide in the Land Information System (LIS) and Global Land Data Assimilation System (GLDAS). We have developed and refined the ability to simulate sprinkler irrigation, furrow irrigation, paddy irrigation, and drip irrigation. We have reconciled multiple global and national irrigation, land cover, and crop type databases in an effort to (1) distinguish irrigated and rainfed agriculture, (2) simulate the proper distribution of crops (as sub-grid tiles) in each model grid pixel, and (3) apply the most likely irrigation method in each tile based on the crop type and country or state level information on the relative usage of sprinkler, flood, and drip irrigation. Using agricultural water withdrawal data, as available, for calibration and evaluation, we show that the implemented approach is promising but that much fine tuning remains to be done. In particular, irrigation model parameters that produce good results in one location often produce less satisfying results in others.
Matthew Rodell↗
Neuroelectric Virtual Devices
This paper presents recent results in neuroelectric pattern recognition of electromyographic (EMG) signals used to control virtual computer input devices. The devices are designed to substitute for the functions of both a traditional joystick and keyboard entry method. We demonstrate recognition accuracy through neuroelectric control of a 757 class simulation aircraft landing at San Francisco International Airport using a virtual joystick as shown. This is accomplished by a pilot closing his fist in empty air and performing control movements that are captured by a dry electrode array on the arm which are then analyzed and routed through a flight director permitting full pilot outer loop control of the simulation. We then demonstrate finer grain motor pattern recognition through a virtual keyboard by having a typist tap his traders on a typical desk in a touch typist position. The EMG signals are then translated to keyboard presses and displayed. The paper describes the bioelectric pattern recognition methodology common to both examples. Figure 2 depicts raw EMG data from typing, the numeral '8' and the numeral '9'. These two gestures are very close in appearance and statistical properties yet are distinguishable by our hidden Kharkov model algorithms. Extensions of this work to NASA emissions and robotic control are considered.
Wheeler, Kevin↗
VTOL shipboard letdown guidance system analysis
Alternative letdown guidance strategies are examined for landing of a VTOL aircraft onboard a small aviation ship under adverse environmental conditions. Off line computer simulation of shipboard landing task is utilized for assessing the relative merits of the proposed guidance schemes. The touchdown performance of a nominal constant rate of descent (CROD) letdown strategy serves as a benchmark for ranking the performance of the alternative letdown schemes. Analysis of ship motion time histories indicates the existence of an alternating sequence of quiescent and rough motions called lulls and swells. A real time algorithms lull/swell classification based upon ship motion pattern features is developed. The classification algorithm is used to command a go/no go signal to indicate the initiation and termination of an acceptable landing window. Simulation results show that such a go/no go pattern based letdown guidance strategy improves touchdown performance.
Phatak, A. V.↗