SEARCH · Search NASA

Results for “layered intermediate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Nanoparticle Assembly Induced Ligand Interactions for Enhanced Electrocatalytic CO 2 Conversion

The microenvironment in which the catalysts are situated is as important as the active sites in determining the overall catalytic performance. Recently, it has been found that nanoparticle (NP) surface ligands can actively participate in creating a favorable catalytic microenvironment, as part of the nanoparticle/ordered-ligand interlayer (NOLI), for selective CO 2 conversion. However, much of the ligand–ligand interactions presumed essential to the formation of such a catalytic interlayer remains to be understood. In this study, by varying the initial size of NPs and utilizing spectroscopic and electrochemical techniques, we show that the assembly of NPs leads to the necessary ligand interactions for the NOLI formation. The large surface curvature of small NPs promotes strong noncovalent interactions between ligands of adjacent NPs through ligand interdigitation. This ensures their collective behavior in electrochemical conditions and gives rise to the structurally ordered ligand layer of the NOLI. Thus, the use of smaller NPs was shown to result in a greater catalytically effective NOLI area associated with desolvated cations and electrostatic stabilization of intermediates, leading to the enhancement of intrinsic CO 2 -to-CO turnover. Our findings highlight the potential use of tailored microenvironments for NP catalysis by controlling its surface ligand interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2011

Operations Concept for a Solar System Internetwork

Space communications to date has been largely managed at the link layer, with simple point-to-point links between a spacecraft at Earth. However, future space exploration scenarios involve much richer communications scenarios, with complex network scenarios involving space assets communicating back to Earth via multiple intermediate relay service providers. To support these more complex network scenarios, the Space Internetworking Strategy Group has developed an operations concept for a Solar System Internetwork (SSI). The operations concept draws on the successes of the terrestrial Internet while addressing unique aspects of space communications. Key elements of the operations concept include a standardized network layer across the end-to-end SSI and the underlying processes for development of a contact plan that captures the link layer connectivity among SSI network nodes.

Edwards, Charles D., Jr.↗

DOE OSTI2024

Adsorption and Solvation Modulate Rhodamine B Diffusion in Ethanol/Water-Filled Anodic Alumina Nanopores

Confinement of solvents and solutes within nanoporous materials frequently leads to the emergence of unique mass transport behaviors that, once fully understood, may lead to improved chemical separations. Here, the diffusion of Rhodamine B (RhB) dye within 10 and 20 nm diameter anodic aluminum oxide (AAO) nanopores filled with binary ethanol/water mixtures is investigated. Mixture compositions spanning from pure ethanol to pure water are employed. The results of confocal fluorescence correlation spectroscopy studies reveal that RhB diffusion occurs by a two-component mechanism comprising composition-dependent fast and slow motions, characterized by diffusion coefficients D f and D s . The results are consistent with those of previous studies performed under more limited conditions [J. Phys. Chem. C, 2023, 127, 411-420]. The fast component scales with mixture viscosity and is assigned to hindered bulk-like diffusion in central pore regions. Slow diffusion likely involves adsorption of RhB to the pore surface and may be described by a desorption mediated mechanism. The occurrence of RhB adsorption to the AAO surface is verified at the single-molecule level by wide-field fluorescence imaging of membrane cross-sectional surfaces. Unique composition dependent trends in the autocorrelation amplitude and in D s that mimic bulk RhB solubility are revealed. D s is found to be smallest in pure ethanol and pure water and largest in intermediate mixtures. These results suggest that RhB surface adsorption is strongest in the pure liquids and weakest in mixtures of intermediate composition, where the dye is least soluble, and most soluble, respectively. As a result, molecular dynamics simulations reveal that a water layer appears on the pore surface under most conditions, while RhB is solvated primarily by ethanol. The composition dependence of RhB diffusion is concluded to reflect its solvation dependent interactions with the pore walls.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Real-Time Diagnostics of 2D Crystal Transformations by Pulsed Laser Deposition: Controlled Synthesis of Janus WSSe Monolayers and Alloys

Energetic processing methods such as hyperthermal implantation hold special promise to achieve the precision synthesis of metastable two-dimensional (2D) materials such as Janus monolayers; however, they require precise control. Here, we report a feedback approach to reveal and control the transformation pathways in materials synthesis by pulsed laser deposition (PLD) and apply it to investigate the transformation kinetics of monolayer WS 2 crystals into Janus WSSe and WSe 2 by implantation of Se clusters with different maximum kinetic energies (<42 eV/Se-atom) generated by laser ablation of a Se target. Real-time Raman spectroscopy and photoluminescence are used to assess the structure, composition, and optoelectronic quality of the monolayer crystal as it is implanted with well-controlled fluxes of selenium for different kinetic energies that are regulated with in situ ICCD imaging, ion probe, and spectroscopy diagnostics. First-principles calculations, XPS, and atomic-resolution HAADF STEM imaging are used to understand the intermediate alloy compositions and their vibrational modes to identify transformation pathways. The real-time kinetics measurements reveal highly selective top-layer conversion as WS 2 transforms through WS 2(1–x) Se 2x alloys to WSe 2 and provide the means to adjust processing conditions to achieve fractional and complete Janus WSSe monolayers as metastable transition states. The general approach demonstrates a real-time feedback method to achieve Janus layers or other metastable alloys of the desired composition, and a general means to adjust the structure and quality of materials grown by PLD, addressing priority research directions for precision synthesis with real-time adaptive control.

2D materials↗

DOE OSTI2021

Radio frequency mixing modules for superconducting qubit room temperature control systems

As the number of qubits in nascent quantum processing units increases, the connectorized RF (radio frequency) analog circuits used in first generation experiments become exceedingly complex. The physical size, cost, and electrical failure rate all become limiting factors in the extensibility of control systems. We have developed a series of compact RF mixing boards to address this challenge by integrating I/Q quadrature mixing, intermediate frequency/LO (local oscillator)/RF power level adjustments, and direct current bias fine tuning on a 40 × 80 mm 2 four-layer printed circuit board with electromagnetic interference shielding. The RF mixing module is designed to work with RF and LO frequencies between 2.5 and 8.5 GHz. The typical image rejection and adjacent channel isolation are measured to be ~27 dBc and ~50 dB. By scanning the drive phase in a loopback test, the module short-term amplitude and phase linearity are typically measured to be 5 ×10 -4 (V pp /V mean ) and 1 ×10 -3 radian (pk-pk). The operation of the RF mixing board was validated by integrating it into the room temperature control system of a superconducting quantum processor and executing randomized benchmarking characterization of single and two qubit gates. We measured a single-qubit process infidelity of 9.3(3) × 10 -4 and a two-qubit process infidelity of 2.7(1) × 10 -2 .

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Nonmonotonic crossover in electronic phase separated manganite superlattices driven by the superlattice period

Studying manganite superlattices [(LCMO) 2n / (PCMO) n ] t made of La 0.625 Ca 0.375 MnO 3 (LCMO) and Pr 0.625 Ca 0.375 MnO 3 (PCMO), we found an unexpected behavior varying the period n. At small n, the ensemble is a three-dimensional ferromagnetic metal due to interfacial charge transfer. At large n , the LCMO layers dominate transport. However, rather than a smooth interpolation between these limits a sharp transport and magnetic anomaly is found at an intermediate critical PCMO thickness n*. Magnetic force microscopy reveals that the phase-separation length scale also maximizes at n* where, unexpectedly, it becomes comparable to that of the (La 1-y Pr y ) 0.625 Ca 0.375 MnO 3 (LPCMO) alloy. Finally, we conjecture the phenomenon originates in a disorder-related length scale: Large charge-ordered clusters as in LPCMO can only nucleate when Pr-rich regions reach a critical size related to n*.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1984

Sound generated by instability waves of supersonic flows. I Two-dimensional mixing layers. II - Axisymmetric jets

An investigation is conducted of the phenomenon of sound generation by spatially growing instability waves in high-speed flows. It is pointed out that this process of noise generation is most effective when the flow is supersonic relative to the ambient speed of sound. The inner and outer asymptotic expansions corresponding to an excited instability wave in a two-dimensional mixing layer and its associated acoustic fields are constructed in terms of the inner and outer spatial variables. In matching the solutions, the intermediate matching principle of Van Dyke and Cole is followed. The validity of the theory is tested by applying it to an axisymmetric supersonic jet and comparing the calculated results with experimental measurements. Very favorable agreements are found both in the calculated instability-wave amplitude distribution (the inner solution) and the near pressure field level contours (the outer solution) in each case.

Tam, C. K. W.↗

NASA NTRS2015

Advanced Antireflection Coatings for High-Performance Solar Energy Applications

Phase II objectives: Develop and refine antireflection coatings incorporating lanthanum titanate as an intermediate refractive index material; Investigate wet/dry thermal oxidation of aluminum containing semiconductor compounds as a means of forming a more transparent window layer with equal or better optical properties than its unoxidized form; Develop a fabrication process that allows integration of the oxidized window layer and maintains the necessary electrical properties for contacting the solar cell; Conduct an experimental demonstration of the best candidates for improved antireflection coatings.

Pan, Noren↗

NASA NTRSDate not supplied

Transonic Cruise Slotted Wing Design for Commercial Transport Aircraft using CDISC

A knowledge-based aerodynamic design method, CDISC, has been extended to enable the computational design of transonic cruise slotted wings for commercial transport aircraft. The cruise slotted wing is a multielement wing concept with a forward main element and an aft flap element, separated to form an intermediate slot. This slot favorably redirects airflow from the main element lower surface toward the low-momentum, upper-surface boundary layer of the flap. Relative to the supercritical wing, the cruise slotted wing enables greater aft loading that helps to reduce shock strength and transonic pressure drag. The cruise slotted wing may be considered a passive drag reduction technology with potential fuel-burn savings and increased vehicle range for next-generation aircraft. The current paper seeks to quantify the drag-saving benefits of cruise slotted wing technology in application to single-aisle commercial transport aircraft. A series of multielement design constraints were developed within CDISC for the design of a partial-span, cruise slotted wing for a Mach-0.8 variant of the Common Research Model. To mitigate the skin-friction drag penalty associated with cruise slotted wings, the design features a flap with natural laminar flow over approximately 75% of the flap surface area. Cruise drag estimates from the NASA USM3D-ME flow solver between a supercritical wing and the partial-span, cruise slotted wing design were within one drag count. Near-cruise, off-design analyses showed limited laminar-flow sensitivity to angle of attack and a more gradual drag rise compared to a supercritical wing. Based on this observed benefit, future work is motivated to design a cruise slotted wing with laminar flow on both wing elements to achieve a significant reduction in cruise drag while delaying drag divergence.

CDISC↗

NASA NTRSDate not supplied

Transonic Cruise Slotted Wing Design for Commercial Transport Aircraft using CDISC

A knowledge-based aerodynamic design method, CDISC, has been extended to enable the computational design of transonic cruise slotted wings for commercial transport aircraft. The cruise slotted wing is a multielement wing concept with a forward main element and an aft flap element, separated to form an intermediate slot. This slot favorably redirects airflow from the main element lower surface toward the low-momentum, upper-surface boundary layer of the flap. Relative to the supercritical wing, the cruise slotted wing enables greater aft loading that helps to reduce shock strength and transonic pressure drag. The cruise slotted wing may be considered a passive drag-reduction technology with potential fuel burn savings and increased vehicle range for next-generation aircraft. The current paper seeks to quantify the drag-saving benefits of cruise slotted wing technology in application to single-aisle commercial transport aircraft. A series of multielement design constraints were developed within CDISC for the design of a partial-span, cruise slotted wing for a Mach-0.8 variant of the Common Research Model. To mitigate the skin-friction drag penalty associated with cruise slotted wings, the design features a flap with natural laminar flow over approximately 75% of the flap surface area. Cruise drag estimates from the NASA USM3D flow solver between a supercritical wing and the partial-span, cruise slotted wing design were within one drag count. Near-cruise, off-design analyses showed limited laminar flow sensitivity to angle of attack and a more gradual drag rise compared to a supercritical wing. Based on this demonstrated benefit, future work is motivated to design a cruise slotted wing with natural laminar flow on both wing elements to achieve a significant reduction in cruise drag while providing delayed drag divergence.

CDISC↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation & Scale-Up Center at NREL and various industrial partners to develop scalable, cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. Substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating influenced the adsorption strength of hydrogenation surface intermediates in unexpected ways, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for production of sustainable aviation fuel (SAF) and the oxidation of glucose for bio-derived gluconic acid. Recent findings from these experimental campaigns will also be shared. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of the impact of ALD coatings in a variety of reaction environments.

bioenergy↗

DOE OSTI2022

Textile Carbon Fiber Packaging and NCF Production

This Technical Collaboration Project focused on packaging large tow (≥ 10 grams/meter) textile carbon fibers, for which currently there is no suitable method. Prior to this project, Oak Ridge National Laboratory (ORNL) used a crude packaging approach to deliver (approximately) 100-meter packages for evaluation by intermediates producers, composites fabricators and other collaborators. That packaging approach was simply a hoop wrap on a standard 75 mm (3 inch) cardboard tube, with paper interleaved between layers and little or no tension control during spooling. While this approach was very effective for initial fiber development and sample fiber and small composite sample evaluation, these packages were inadequate for larger-scale demonstrations and more extensive applications development. The paper-interleaved packages were inconsistent, wasteful, and too small for commercial utilization; they were designed as a quick and simple means to package material for delivery into prototyping operations and were never expected to satisfy industrial requirements for commercial production. This project aimed to develop a commercially relevant approach for packaging large tow textile carbon fibers for robust delivery into downstream commercial intermediates and composites production operations. The development of robust packaging equipment that delivers packages meeting industrial requirements is essential to commercial implementation. In this project, the team identified packaging requirements, created a design, and prototyped a new packaging concept at ORNL’s Carbon Fiber Technology Facility (CFTF) and resulting packages were tested in production of non-crimp fabric (NCF).

42 ENGINEERING↗

DOE OSTI2024

Operando investigations of the solid electrolyte interphase in the lithium mediated nitrogen reduction reaction

The lithium-mediated nitrogen reduction reaction (Li-NRR) represents a promising approach for electrochemical nitrogen activation, in which the solid electrolyte interphase (SEI) layer formed on the electrochemically plated lithium plays a key role. Herein, we used time-resolved, operando, grazing incidence wide-angle X-ray scattering (GI WAXS) to identify SEI species and reaction intermediates in the Li-NRR, comparing LiBF 4 and LiClO 4 as electrolyte salts. In this study, we demonstrated how the SEI composition influences the Li-NRR performance by regulating proton transport to the plated Li. When LiBF 4 is used as the electrolyte salt, the formation of LiF and lithium ethoxide (LiEtO) is observed. Reaction intermediates such as LiH and LiN x H y species were found and provide insight into reaction pathways towards undesired and desired products, respectively. Observed restructuring of the Cu (111) single crystal substrate also indicates interaction with plated Li that could possibly influence the Li-NRR performance. Together, these experiments give molecular insight into how to design Li-NRR systems and their SEI layers for optimal performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Bypassing sulfides: comparing the morphology and performance of solution processed Cu(In,Ga)Se 2 films prepared via two selenide molecular precursor routes

Solution-processing of thin-film photovoltaics offers an alternative to vacuum-deposition based approaches. The amine–thiol reactive solvent system has become a focal point for the solution-processing of chalcogenide species, owing to the convenience of precursor preparation and comparatively high performance of prepared devices. Selenide species prepared via the amine–thiol route typically progress through a sulfide intermediate phase, and as such are commonly afflicted with sulfur and carbon impurities along- side the presence of a carbonaceous fine-grained layer. Here, two routes of preparing films directly to a selenide phase are examined; first by the co-dissolution of selenium in an amine–thiol solution and second via the novel use of reactive alkylammonium polyselenides. Lamella are cut from these selenide precursor films and final devices, and STEM-EDX and TEM are used to characterize film morphology and secondary phases. A champion device efficiency of 11.2% is reported for the novel polyselenide route, and clear paths of improvement are identified.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Superconducting phase of Ti x O y thin films grown by molecular beam epitaxy

Here we investigate the complex relationship between the growth conditions and the structural and transport properties of Ti x O y thin films grown by molecular beam epitaxy. Transport properties ranging from metallicity to superconductivity and insulating states are stabilized by effectively tuning the O/Ti ratio via the Ti flux rate and the O partial pressure P Ox for films grown on (0001)-Al 2 O 3 substrates at 850° C. A cubic c-TiO 1±δ buffer layer is formed for low O/Ti ratios, while a corundum cr-Ti 2 O 3 layer is formed under higher-oxidizing conditions. Metallicity is observed for c-TiO 1-δ buffer layers. The superconducting γ -Ti 3 O 5 Magnéli phase is found to nucleate on a c-TiO 1-δ buffer for intermediate POx conditions, and an insulator-superconducting transition is observed at 4.5 K (T$^{onset}_{C}$ = 6K) for 85 nm thick films. Strain relaxation of γ -Ti 3 O 5 occurs with increasing film thickness and correlates with a thickness-dependent increase in T C observed for Ti x O y thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

RF mixing modules for superconducting qubit room temperature control systems v1.0

We have developed a series of compact RF mixing boards by integrating I/Q quadrature mixing, IF(intermediate frequency)/LO(local oscillator)/RF power level adjustments, and DC (direct current) bias fine tuning on a 40 mm × 80 mm 4-layer PCB (printed circuit board) board with EMI (electromagnetic interference) shielding.

Huang, Gang↗

NASA NTRS1986

Using PCDS to study the influence of UV flux variation on the middle atmosphere

The value of the Pilot Climate Data System (PCDS) in examining the influences of short-period solar flux variations on the middle atmosphere was demonstrated. Several Nimbus satellite data sets proposed for the study exist in the PCDS. Planned for retrieval through the PCDS are ozone mixing ratios and cumulative ozone profiles available from the Backscatter Ultraviolet Spectrophotometer on Nimbus-4. Also to be accessed are Nimbus-7 data sets that will provide ozone and nitrogen dioxide mixing ratios, temperature profiles from the Limb Infrared Monitor of the Stratosphere, and ozone mixing ratio profiles from the Solar Backscatter Ultraviolet Spectrophotometer. Bypassing the time-consuming process of reading raw data tapes, the researchers plan to transfer the PCDS processed data to an IBM PC at Iowa State University. The IBM PC will serve as an intermediate vehicle for transferring the data to the NOAA CYBER 840 at Boulder, Colorado, where research will continue on both an eight-layer radiative-photochemical numerical model and on a nonlinear dynamical model. in this research are the FGGE and ERB data sets. These relevant data sets also reside in the PCDS. Problems associated with remote access to the PCDS were discussed in regard to all the PCDS data sets.

Heilman, W.↗

NASA NTRS1999

Layered double hydroxide stability. 1. Relative stabilities of layered double hydroxides and their simple counterparts

Solutions containing di- and trivalent metal chlorides [M(II) = Mg2+, Zn2+, Co2+, Ni2+, Mn2+; M(III) = Al3+, Fe3+] were titrated with NaOH to yield hydrotalcite-like layered double hydroxides (LDH), [[M(II)]1-x[M(III)]x(OH)2][Cl]x yH2O, by way of M(III) hydroxide/hydrous oxide intermediates. Analysis of the resultant titration curves yields nominal solubility constants for the LDH. The corresponding LDH stabilities are in the order Mg < Mn < Co approximately Ni < Zn for M(II) and Al < Fe for M(III). The stability of LDH relative to the separate metal hydroxides/hydrous oxides is discussed.

Non-NASA Center↗