Search NASA⌕ Search

SEARCH · Search NASA

Results for “light element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Solid Metal-Liquid Metal Partitioning of Pt, Re, and Os: The Effect of Carbon

If the measured Os isotopic ratios are a signature from the Earth's outer core, understanding them is a unique opportunity to understand more about the Earth's core. The distribution of elements between the Earth's solid inner core and the liquid outer core will depend on their solid metal-liquid metal partition coefficients (D). Solid metal-liquid metal partitioning data are loosely consistent with the needed fractionations between Re-Os and Pt-Os to account for the Os isotopic signature; D(Os) is greater than both D(Re) and D(Pt), and the magnitude of the partition coefficients are similar to those needed [e.g. 7, 8]. The pressure in the core, the composition of the core, and the crystal structure of the solid Fe alloy in the inner core may influence the specific values of the partition coefficients. It may thus be possible to use these sensitivities of the partition coefficients to gain insight into the conditions within the Earth's core. In this abstract, we focus on the compositional influence of C, a potential component of the light element in the Earth's core [9], on the partitioning behaviors of Pt, Re, and Os.

Chabot, N. L.↗

Isotope scattering and phonon thermal conductivity in light atom compounds: LiH and LiF

Engineered isotope variation is a pathway toward modulating lattice thermal conductivity (κ) of a material through changes in phonon-isotope scattering. The effects of isotope variation on intrinsic thermal resistance is little explored, as varying isotopes have relatively small differences in mass and thus do not affect bulk phonon dispersions. However, for light elements isotope mass variation can be relatively large (e.g., hydrogen and deuterium). Using a first principles Peierls-Boltzmann transport equation approach the effects of isotope variance on lattice thermal transport in ultra-low-mass compound materials LiH and LiF are characterized. The isotope mass variance modifies the intrinsic thermal resistance via modulation of acoustic and optic phonon frequencies, while phonon-isotope scattering from mass disorder plays only a minor role. This leads to some unusual cases where values of isotopically pure systems ( 6 LiH, 7 Li 2 H and 6 LiF) are lower than the values from their counterparts with naturally occurring isotopes and phonon-isotope scattering. However, these differences are relatively small. The effects of temperature-driven lattice expansion on phonon dispersions and calculated κ are also discussed. This work provides insight into lattice thermal conductivity modulation with mass variation and the interplay of intrinsic phonon-phonon and phonon-isotope scattering in interesting light atom systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Machine learning molecular dynamics simulations toward exploration of high-temperature properties of nuclear fuel materials: case study of thorium dioxide

Predicting materials properties of nuclear fuel compounds is a challenging task in materials science. Their thermodynamical behaviors around and above the operational temperature are essential for the design of nuclear reactors. However, they are not easy to measure, because the target temperature range is too high to perform various standard experiments safely and accurately. Moreover, theoretical methods such as first-principles calculations also suffer from the computational limitations in calculating thermodynamical properties due to their high calculation-costs and complicated electronic structures stemming from f-orbital occupations of valence electrons in actinide elements. Here, we demonstrate, for the first time, machine-learning molecular-dynamics to theoretically explore high-temperature thermodynamical properties of a nuclear fuel material, thorium dioxide. The target compound satisfies first-principles calculation accuracy because f-electron occupation coincidentally diminishes and the scheme meets sampling sufficiency because it works at the computational cost of classical molecular-dynamics levels. We prepare a set of training data using first-principles molecular dynamics with small number of atoms, which cannot directly evaluate thermodynamical properties but captures essential atomistic dynamics at the high temperature range. Then, we construct a machine-learning molecular-dynamics potential and carry out large-scale molecular-dynamics calculations. Consequently, we successfully access two kinds of thermodynamic phase transitions, namely the melting and the anomalous λ transition induced by large diffusions of oxygen atoms. Furthermore, we quantitatively reproduce various experimental data in the best agreement manner by selecting a density functional scheme known as SCAN. Our results suggest that the present scale-up simulation-scheme using machine-learning techniques opens up a new pathway on theoretical studies of not only nuclear fuel compounds, but also a variety of similar materials that contain both heavy and light elements, like thorium dioxide.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic stopping powers for heavy ions in SiC and SiO{sub 2}

Accurate information on electronic stopping power is fundamental for broad advances in materials science, electronic industry, space exploration, and sustainable energy technologies. In the case of slow heavy ions in light targets, current codes and models provide significantly inconsistent predictions, among which the Stopping and Range of Ions in Matter (SRIM) code is the most commonly used one. Experimental evidence, however, has demonstrated considerable errors in the predicted ion and damage profiles based on SRIM stopping powers. In this work, electronic stopping powers for Cl, Br, I, and Au ions are experimentally determined in two important functional materials, SiC and SiO{sub 2}, based on a single ion technique, and new electronic stopping power values are derived over the energy regime from 0 to 15 MeV, where large deviations from the SRIM predictions are observed. As an experimental validation, Rutherford backscattering spectrometry (RBS) and secondary ion mass spectrometry (SIMS) are utilized to measure the depth profiles of implanted Au ions in SiC for energies from 700 keV to 15 MeV. The measured ion distributions by both RBS and SIMS are considerably deeper than the SRIM predictions, but agree well with predictions based on our derived stopping powers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutrino-Nucleus Reactions at MeV Region based on New Shell-Model Hamiltonians

Neutrino-nucleus reactions at MeV region are evaluated by using new shell model Hamiltonians, which are found to improve the description of spin degrees of freedom in nuclei as well as shell evolutions. The light element synthesis by neutrino processes in supernova explosions is discussed with the use of the new reaction cross sections for {sup 12}C and {sup 4}He. Possible constraints on the mixing angle {theta}{sub 13} and the neutrino mass hierarchy are pointed out to be imposed by the production yields of {sup 7}Li and {sup 11}B. Spin-dipole transition strengths in {sup 16}O and neutrino-induced reactions on {sup 16}O are investigated with the new improved Hamiltonian. The Gamow-Teller transition strength in {sup 56}Ni for the new Hamiltonian, which is more fragmented compared to previous calculations, is found to lead to the enhancement of the production yield of {sup 55}Mn in population III stars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Unveiling Atomistic Mechanisms Governing Additive Manufacturing Processability and Mechanical Behavior of a Refractory Complex Concentrated Alloy

Extending the concept of complex concentrated alloys (CCAs) to the refractory alloys (solidus temperature over 2000 °C) space potentially facilitates the design of lightweight structural alloys with service temperatures that exceed those of Ni and Co‐based alloys. However, the room and elevated temperature tensile properties of the current refractory‐CCAs (R‐CCAs) are inferior to those of the Ni/Co‐based alloys. Furthermore, the manufacturing scalability of R‐CCAs remains challenging, in that cracks are prevalent in all R‐CCAs when processed using near‐net shape manufacturing processes, such as fusion‐based additive manufacturing (F‐BAM). Still, mechanisms governing the poor F‐BAM processability of R‐CCAs remain unexplored. Here, to this end, this work unveils the atomistic mechanisms underlying F‐BAM process‐induced cracking in a NbTiTaMoHfZrC R‐CCA. The implications of light elements’ presence for intrinsic ductility and grain boundary cohesion, and subsequently for F‐BAM processability and mechanical behavior, are revealed. Leveraging the insights, we accomplish what is, to the best of the knowledge, the first instance of crack‐free F‐BAM processing of any R‐CCA. Additionally, the R‐CCA exhibits over 20% tensile ductility and ≈160 MPa tensile yield strength at 1200 °C. In addition to facilitating the design of lightweight R‐CCAs, findings enable scalable manufacturing of these ultra‐high temperature alloys for structural applications.

Refractory alloys↗

BBN photodisintegration constraints on gravitationally produced vector bosons

Gravitational production of massive particles due to cosmic expansion can be significant during the inflationary and reheating period of the Universe. If the particle also has non-gravitational interactions that do not significantly affect its production, numerous observational probes open up, including cosmological probes. In this work, we focus on the gravitational production of light vector bosons that couple feebly to the Standard Model (SM) particles. Due to the very feeble coupling, the light vector bosons never reach thermal equilibrium, and if the Hubble scale at the end of inflation is above 10 8 GeV, the gravitational production can overwhelm the thermal production via the freeze-in mechanism by many orders of magnitude. As a result, much stronger constraints from the Big Bang Nucleosynthesis (BBN) can be placed on the lifetime and mass of the vector bosons compared to the scenario where only thermal production is considered. As an example, we study the sub-GeV scale dark photons, which couple to the SM only through kinetic mixing, and derive constraints on the mass and kinetic mixing parameter of the dark photon from the photodisintegration effects on the light element abundances relevant at the end of the BBN when the cosmic age was around 10 4 s.

79 ASTRONOMY AND ASTROPHYSICS↗

New type of possible high-pressure polymorphism in NiAs minerals in planetary cores

The nickel arsenide (B81) and related crystal structures are among the most important crystallographic arrangements assumed by Fe and Ni compounds with light elements such as Si, O, S, and P, expected to be present in planetary cores. Despite the simple structure, some of these materials like troilite (FeS) exhibit complex phase diagrams and rich polymorphism, involving significant changes in interatomic bonding and physical properties. NiP (oP16) represents one of the two principal structure distortions found in the nickel arsenide family and is characterized by P–P bonding interactions that lead to the formation of P2 dimers. In the current study, the single-crystal synchrotron X-ray diffraction technique, aided by first principles density functional theory (DFT) calculations, has been applied to examine the compression behavior of NiP up to 30 GPa. Two new reversible displacive phase transitions leading to orthorhombic high-pressure phases with Pearson symbols oP40 and oC24 were found to occur at approximately 8.5 and 25.0 GPa, respectively. The oP40 phase has the primitive Pnma space group with unit cell a = 4.7729(5) Å, b = 16.6619(12) Å, and c = 5.8071(8) Å at 16.3(1) GPa and is a superstructure of the ambient oP16 phase with multiplicity of 2.5. The oC24 phase has the acentric Cmc21 space group with unit cell a = 9.695(6) Å, b = 5.7101(9) Å, and c = 4.7438(6) Å at 28.5(1) GPa and is a superstructure of the oP16 phase with multiplicity of 1.5. DFT calculations fully support the observed sequence of phase transitions. The two new phases constitute logical next stages of P sublattice polymerization, in which the dilution of the P3 units, introduced in the first high-pressure phase, decreases, leading to compositions of Ni20(P3)4(P2)4 and Ni12(P3)4, and provide important clues to understanding of phase relations and transformation pathways in the NiAs family.

36 MATERIALS SCIENCE↗

Quantitative near-field water–air spray measurements at elevated pressures by neutron radiography imaging

Extensive experimental research on high-pressure spray has been conducted for decades to deepen our understanding and optimize its use in transportation, aviation, and propulsion applications; however, the near-field and in-nozzle flow characteristics are not fully understood. Dense near-field spray is among the most challenging diagnostic tasks since light is severely scattered and diffused by the liquid droplets and columns. In this work, the near-field spray and in-nozzle flow characteristics of an aeration nozzle at elevated pressures were characterized by neutron radiography imaging at the Oak Ridge National Laboratory High Flux Isotope Reactor. Neutron imaging benefits via strong penetration depths for some metals (i.e., aluminum, lead, and steel) and is sufficiently sensitive to detection of light elements, especially for hydrogen-based molecules, due to the large incoherent scattering cross section of neutrons. Both two-dimensional snapshots of the near-field spray and a three-dimensional tomographic scan of the nozzle geometry and in-nozzle water were obtained. This work provides new quantitative characterization of practical metal nozzle geometry for accurate boundary conditions, internal flow patterns inside the nozzle, and high-pressure spray flows. In conclusion, the findings may be used to improve performance and operating conditions of transportation vehicles and propulsion systems.

42 ENGINEERING↗

Particulate Generation on Surface of Iron Selenide Films by Air Exposure

Nanometer-sized particular structures are generated on the surfaces of FeSe epitaxial films directly after exposure to air; this phenomenon was studied in the current work because these structures are an obstacle to field-induced superconductivity in electric double-layer transistors using FeSe channel layers. Chemical analyses using field-effect scanning Auger electron spectroscopy revealed no clear difference in the chemical composition between the particular structures and the other flat surface region. This observation limits the possible origins of the particulate formation to light elements in air such as O, C, H, and N.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preface to Special Issue on Neutron Scattering for Catalysis

In the pursuit of understanding the chemical transformations of catalytic reactions and the structural evolution of catalysts at the molecular level, a suite of advanced experimental methods has been developed in the studies of catalysis science. Furthermore, among these methods, neutron scattering not only gives catalytic information that is highly complementary to other microscopic scattering techniques such as electrons (microscopy and diffraction) and photons from visible light to synchrotron X-rays, but also frequently provides unique insights into catalysis regarding the structure and chemical nature of light elements such as hydrogen and oxygen that are either not possible or difficult to study with other approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Oxide + TiN Inclusions in Fe-16 Mass Pct Cr Ferritic Alloy Using Automatic SEM-EDS Analysis

The assessment of automatic SEM-EDS results is significant to reveal the possible inaccuracy of the results and the limitation of this characterization technique in analyzing inclusions. In current research, the oxide + TiN inclusion in Fe-16 mass pct Cr ferritic alloy is characterized by emphasizing the effects of Mg addition and N content on the composition, morphology, homogeneity of dispersion, and size distribution of inclusions; the assessment of automatic SEM-EDS results in rapid analysis concerning its limitation and the utilization of its advantage to clarify the formation mechanism of inclusions are conducted. The nature of inclusions is revealed. Mg addition makes the number density of inclusions larger and the size of inclusions finer. The effect of N content on the size of oxde + TiN was not obvious. Automatic SEM-EDS analysis is deficient in detecting light elements and low content elements in the inclusions and distinguishing between TiN and oxide + TiN. Optimizing the experimental design and combining automatic SEM-EDS results with manual SEM-EDS and optical microscopy results can contribute to delivering accurate and speedy results.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Ta-10W Coatings on CP-Ti and TC4 Substrates

The corrosion resistance of commercial purity titanium (CP-Ti) and Ti-6Al-4V (TC4) alloys coated with Ta-10W via multi-arc ion plating is investigated. The coating with uniform thickness exhibited silvery, dense, and continuous surface without apparent defects. The interface between the Ta-10W coating and substrate was dense with light elemental diffusion. The coating x-ray diffraction profile was body-centered cubic, α-Ta. The corrosion current density of the coated samples was reduced by one order of magnitude in 3.5% HCl solution, compared to that of the substrates. Electrochemical impedance spectroscopy showed that the Ta-10W coating improved the substrate metal corrosion resistance by slowing down the corrosion tendency and rate, increasing the charge transfer resistance and dielectric property of the double layer. Electrochemical corrosion testing showed that the Ta-10W coating improved the substrates’ corrosion resistances. After immersion in 5% HCl solution for 168 h, the uncoated substrates exhibited severe corrosion, whereas the CP-Ti and TC4 substrates coated by Ta-10W were still intact and dense. Point scanning of the immersed corrosion demonstrated that the Ta-10W coating reduced the relative oxygen content from 5.17 to 0.78% of the TC4. These results indicated that the Ta-10W coating was efficient in protecting the CP-Ti and TC4 from corrosion.

36 MATERIALS SCIENCE↗

Which nuclear data can be validated with LLNL pulsed-sphere experiments?

It is shown here that 14-MeV D+T LLNL pulsed-sphere experiments bring complementary information into the process of validating nuclear data compared to experiments that are traditionally used for this purpose—such as critical assemblies. To be more specific, the 14-MeV D+T LLNL pulsed-sphere neutron-leakage spectra enable to validate scattering and fission nuclear data up to 15 MeV (compared to approximately up to 5 MeV when using criticality experiments) and employ to this end simple compound targets containing only few isotopes. In this work, sensitivity profiles of the spectra to nuclear data are calculated in order to understand in detail which isotopes, observables, and energy ranges of nuclear data contribute significantly to their simulation. These profiles are presented for a few selected spheres containing 16 O, 12 C, 56 Fe, and 239 Pu. It is shown that the neutron-leakage spectra of spheres containing light elements are mostly sensitive to elastic- and inelastic-scattering cross sections on discrete levels and corresponding angular distributions. Spheres of structural materials are sensitive to elastic- and inelastic-scattering cross sections, including scattering on discrete levels and the continuum, and double-differential cross sections. Actinide spheres are also strongly sensitive to the fission observables, in particular to the total-fission neutron spectrum. Thin spheres (in which neutrons experience on average less than one scatter) are mostly sensitive to data near the elastic peak, in the energy range from 12–15 MeV, while thicker ones can be sensitive to data at lower incident-neutron energies due to multiple-scattering effects. This information is brought together with simulations of 71 pulsed-sphere neutron-leakage spectra using the ENDF/B-VII.1 and ENDF/B-VIII.0 nuclear-data libraries. This analysis highlights ENDF/B-VIII.0 data that could be further investigated for potential shortcomings ( 6 Li, 12 C, 16 O, 24-26 Mg, 27 Al, 48 Ti, 56 Fe, and 208 Pb) or are likely reliable ( 1,2 H, 7 Li, 9 Be, 14 N, 235,238 U, and 239 Pu) as indicated by validating with LLNL pulsed-sphere experiments.

14-MeV D+T LLNL pulsed-sphere neutron-leakage spec↗

Equation of state and phase diagram of Fe-16Si alloy as a candidate component of Earth's core

The outer core of the Earth contains several weight percent of one or more unknown light elements, which may include silicon. Therefore it is critical to understand the high pressure–temperature properties and behavior of an iron–silicon alloy with a geophysically relevant composition (16 wt% silicon). We experimentally determined the melting curve, subsolidus phase diagram, and equations of state of all phases of Fe–16 wt%Si to 140 GPa, finding a conversion from the D0 3 crystal structure to a B2+hcp mixture at high pressures. The melting curve implies that 3520 K is a minimum temperature for the Earth's outer core, if it consists solely of Fe–Si alloy, and that the eutectic composition in the Fe–Si system is less than 16 wt% silicon at core–mantle boundary conditions. Comparing our new equation of state to that of iron and the density of the core, we find that for an Fe–Ni–Si outer core, 11.3±1.5 wt% silicon would be required to match the core's observed density at the core–mantle boundary. We have also performed first-principles calculations of the equations of state of Fe 3 Si with the D0 3 structure, hcp iron, and FeSi with the B2 structure using density-functional theory.

Fischer, Rebecca A↗

Phase relations in the Fe-FeSi system at high pressures and temperatures

The Earth's core is comprised mostly of iron and nickel, but it also contains several weight percent of one or more unknown light elements, which may include silicon. Therefore it is important to understand the high pressure, high temperature properties and behavior of alloys in the Fe–FeSi system, such as their phase diagrams. We determined melting temperatures and subsolidus phase relations of Fe–9 wt% Si and stoichiometric FeSi using synchrotron X-ray diffraction at high pressures and temperatures, up to ~200 GPa and ~145 GPa, respectively. Combining this data with that of previous studies, we generated phase diagrams in pressure–temperature, temperature–composition, and pressure–composition space. We find the B2 crystal structure in Fe–9Si where previous studies reported the less ordered bcc structure, and a shallower slope for the hcp+B2 to fcc+B2 boundary than previously reported. In stoichiometric FeSi, we report a wide B2+B20 two-phase field, with complete conversion to the B2 structure at ~42 GPa. The minimum temperature of an Fe–Si outer core is 4380 K, based on the eutectic melting point of Fe–9Si, and silicon is shown to be less efficient at depressing the melting point of iron at core conditions than oxygen or sulfur. At the highest pressures reached, only the hcp and B2 structures are seen in the Fe–FeSi system. We predict that alloys containing more than ~4–8 wt% silicon will convert to an hcp+B2 mixture and later to the hcp structure with increasing pressure, and that an iron–silicon alloy in the Earth's inner core would most likely be a mixture of hcp and B2 phases.

Fischer, Rebecca A.↗