Search NASA⌕ Search

SEARCH · Search NASA

Results for “limestone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes ( M w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity ( M w ~ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.

58 GEOSCIENCES↗

The impact of capillary heterogeneity on CO 2 flow and trapping across scales

Capillary heterogeneity has been identified over the last decade as a key control on subsurface CO 2 flow behavior during geological CO 2 sequestration. These heterogeneities can be formed in all sedimentary rocks, ranging from slight variations in the sand grain sizes to extensive sequences of interbedded sands, shales, and limestones. Capillary heterogeneity has been largely, although not entirely, overlooked in subsurface flow modeling because it is assumed to only directly influence fluid redistribution over scales of centimeters to meters. However, even small-scale fluid movements can result in dramatic impacts on the mobility and trapping of the CO 2 over kilometers. Therefore, neglecting capillary heterogeneity at multiple scales could potentially lead to errors in modeling and predicting field-scale plume migration. In this review paper, we aim to provide a consistent overview to (1) establish that capillary heterogeneity can have a major impact on CO 2 plume migration, (2) establish the respective length scales at which capillary heterogeneity matters, and (3) provide guidance for numerical modeling. This review covers pertinent literature and extracts key observations from the core to the field scales. Experimental studies have shown that millimeter-decimeter scale capillary heterogeneity can cause the so-called capillary heterogeneity trapping in addition to pore-scale residual trapping. Even at such a small scale, capillary heterogeneity can already lead to complex upscaled constitutive relationships, such as flow-rate dependent and anisotropic relative permeability, which affects field-scale CO 2 migration even when field-scale heterogeneities are present. Under gravity-dominated flow regimes, centimeter-meter scale capillary heterogeneity can entrap a significant amount of CO 2 at field scale, not just after imbibition but also during drainage. In certain cases, the presence of capillary heterogeneity can even completely stop the vertical movement of the CO 2 plume, hence greatly reducing leakage risks. At meter-kilometer scale, the influence of capillary heterogeneity is more pronounced and can hinder or redirect CO 2 migration in both lateral and vertical directions. The impact of capillary heterogeneity across multiple spatial scales poses a great challenge in modeling CO 2 migration at field scale, because it is practically impossible to build a field-scale earth model with grid blocks at millimeter scale. We recommend a hierarchical modeling approach to address this challenge. At field scale, earth models are built to capture geological features and heterogeneities in high but still practical grid resolutions. For each facies or rock type of the field-scale model, high- resolution meter-scale “conceptual” models are built with millimeter-scale grid blocks to capture representative fine-scale bedding geometries and heterogeneities in various environments of deposition, bridging the gap from subcore scale to the size of a field-scale simulation grid block. Upscaling is then used to preserve the smaller-scale flow dynamics of various rock types in field-scale simulations. Here, future work is needed to (1) refine, improve, and validate the hierarchical modeling approach; (2) build libraries of fine-scale bedding models for facies in various environments of deposition; (3) quantify multiscale capillary heterogeneity effects under subsurface uncertainties; (4) gain learning from different storage formations; and (5) establish best practices that balance accuracy and computational speed.

Capillary heterogeneity↗

A Geostatistical Study in Support of CO 2 Storage in Deep Saline Aquifers of the Shenhua CCS Project, Ordos Basin, China

The Shenhua Carbon Capture and Storage (CCS) project at the Shenbei Slope injection site in North Yulin is the first 100,000 ton-per-year scale CCS pilot project in China with an injection operation lasting nearly 3 years. In this study, we investigate various geostatistical methods and their impact on the respective geologic models on which simulation is performed to understand the phenomena observed during 3 years of Shenhua CCS operations. Although there was a brief period of wellhead pressure increase at the injection well, it unexpectedly dropped for most of the time. Another interesting observation showed that the majority of CO 2 gas injection was received by the topmost sandstone Liujiagou formation instead of the basement limestone Majiagou formation, which was predicted to have much more injectivity and storage capacity. Based on the current geostatistical methods and available data, 3 steps of reservoir modeling and flow simulation are carried out and they go from having homogeneous property models to incorporating standard 2-point geostatistical methods to using object-based models. The layer-cake models generate a rather uniform plume shape and increased pressure response. Meanwhile, two-point statistical models add more complexity to the size and shape of CO 2 plume, however are not capable of reproducing the pressure decline behavior. These results demonstrate homogeneous and 2-point geostatistical models are inadequate in interpreting subsurface heterogeneity, both due to their method and data limitations. Further work is being done with object-based models to produce a system of meandering rivers based on the geological concept of Shenhua injection site. This will help offset the data limitation and bring our model closer to geologic reality.

54 ENVIRONMENTAL SCIENCES↗

Techno-economic feasibility of geothermal energy production using inactive oil and gas wells for district heating and cooling systems in Tuttle, Oklahoma

Oil and gas wells have been drilled in the United States and often encounter hot co-produced water possibly suitable for geothermal direct-use applications. Here this study evaluated geothermal resources, heating and cooling demand, and techno-economic potential of four oil and gas wells repurposed for geothermal energy production to serve two public schools and 250 nearby houses in Tuttle, Oklahoma, USA. Subsurface geology in the study area primarily consists of Permian to Mississippian sandstone and limestone formations approximately from 2 km to 3.5 km depth. With a geothermal gradient of 25.3 °C/km, the temperature of geothermal energy production was estimated as 68.2 °C at 2.1 km. The potential of calcite scaling within boreholes and pipes was minimal. Using the characterized reservoir properties, techno-economic analyses were conducted for evaluating levelized costs of geothermal energy production for direct-use heating and cooling and district heating systems with five different production scenarios. Heating and cooling demand in two schools and 250 houses and additional 0.3 MW and 0.6 MW base heating loads for potential geothermal direct-use applications in the study area were also incorporated in the modeling. Results indicated that the levelized cost of heating of geothermal district heating systems utilizing existing wells were significantly lower than those of conventional geothermal energy systems that include well drillings. The geothermal energy production with doublet and quartet configurations was generally sufficient to supply total annual heating demand in the district, while a peaking boiler was used to supply peak loads. Doublet configurations showed higher production temperature with a lower thermal drawdown than the quartet configurations. The doublet system at 2.1 km production depth with 9.3 kg/s flow rate represented the optimal levelized cost of $71/MWh and 91.2% utilization factor. These results imply that the Tuttle geothermal district heating system is techno-economically feasible and comparable to geothermal district heating systems in the United States and the regional natural gas rate for residentials by recycling inactive oil and gas wells with no drillings.

15 GEOTHERMAL ENERGY↗

Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of Bulgaria

Here, terrestrial moissanite (SiC) is widely reported as an ultra-high pressure mineral occurring in kimberlites, diamonds and ultramafic/mafic rocks of mantle origin. However, the conditions of crystallization remain largely unknown. Moreover, dozens of SiC occurrences have been reported from continental crust sources such as granitoids, andesite–dacite volcanic rocks and their breccia, metasomatic and metamorphic rocks, and even limestones. The validity of many of these reports is still debated primarily due to possible contaminations from the widespread use of synthetic SiC abrasives in samples preparation. Indeed, reports of well-documented in-situ occurrences of moissanite in association with co-existing minerals are still scarce. The only condition of moissanite formation that is agreed upon is that extremely reducing media are required (e.g. 4.5–6 log units below the iron-wustite buffer). Here, we report the new occurrence of moissanite that was found in-situ within the garnet–staurolite–mica schists of Topolovgrad metamorphic group of Triassic age in Southern Bulgaria. The 10–300 μm moissanite crystals are situated within 0.1–1.2 mm isolated clusters, filled with amorphous carbon and nanocrystalline graphite. Most of moissanite crystals are 15R (rhombohedral) and 6H (hexagonal) polytypes, and one prismatic crystal, found within them, exhibits unusual concentric polytypical zoning with core (15R), intermediate zone (6H) and rim (3C-cubic). Experimental data show that this type of polytypical zonation is likely due to a decrease in temperature (or/and pressure?) and changes in Si/C ratio. Indeed, amphibolite facies metamorphism (500–580°C – garnet–staurolite zone) followed by a subsequent cooling during the retrograde stage of green schist facies metamorphism (~400–500°C) could have provided a change in temperature. The SiC containing clusters exhibit evidence that they are pre-metamorphic, and we hypothesize that their protolith was a “black shale” material likely rich in carbon, hydrocarbon and terrigenous silica. The latter served as a source of isolated chemically-reduced media, which is required for SiC formation. Other concepts to explain moissanite occurrences in metasedimentary rocks are also discussed. Importantly, our findings show that the formation conditions of moissanite are likely more variable than previously recognized.

15R-SiC↗

Speleogenesis, geometry, and topology of caves: A quantitative study of 3D karst conduits

Karst systems are hierarchically spatially organized three-dimensional (3D) networks of conduits behaving as drains for groundwater flow. Recently, geostatistical approaches proposed to generate karst networks from data and parameters stemming from analogous observed karst features. Other studies have qualitatively highlighted relationships between speleogenetic processes and cave patterns. However, few studies have been performed to quantitatively define these relationships. This paper reports a quantitative study of cave geometries and topologies that takes the underlying speleogenetic processes into account. In order to study the spatial organization of caves, a 3D numerical database was built from 26 caves, corresponding to 621 km of cumulative cave passages representative of the variety of karst network patterns. The database includes 3D speleological surveys for which the speleogenetic context is known, allowing the polygenic karst networks to be divided into 48 monogenic cave samples and classified into four cave patterns: vadose branchwork (VB), water-table cave (WTC), looping cave (LC), and angular maze (AM). Eight morphometric cave descriptors were calculated, four geometrical parameters (width-height ratio, tortuosity, curvature, and vertical index) and four topological ones (degree of node connectivity, α and γ graph indices, and ramification index) respectively. The results were validated by statistical analyses (Kruskal-Wallis test and PCA). The VB patterns are clearly distinct from AM ones and from a third group including WTC and LC. A quantitative database of cave morphology characteristics is provided, depending on their speleogenetic processes. These characteristics can be used to constrain and/or validate 3D geostatistical simulations. This study shows how important it is to relate the geometry and connectivity of cave networks to recharge and flow processes. Conversely, the approach developed here provides proxies to estimate the evolution of the vadose zone to epiphreatic and phreatic zones in limestones from the quantitative analysis of existing cave patterns.

58 GEOSCIENCES↗

Constraining the magnitude of the carbon isotope excursion during the Paleocene-Eocene thermal maximum using larger benthic foraminifera

The Paleocene-Eocene thermal maximum (PETM) was an extraordinary pulse of global warming approximately 56 Ma. This warmingevent is associated with an addition of large amounts of 13C-depleted carbon into the atmosphere-ocean system, but the magnitude of the negative carbon isotope excursion (CIE)signaling the PETMand often used to estimate mass of the released carbonis still debated. Here we gauge the CIE magnitude usingsecondary ion mass spectrometry (SIMS) to perform in situ δ 13 C measurements within individual larger benthic foraminifera preserved in a tropical shallow marine limestone section in south Tibet. This SIMS-based δ 13 C record yields a negative CIE (Δ~7‰) comparable in magnitude to that registered by terrestrial records but larger than the ~4‰CIE returned by surface-dwelling planktonic foraminiferain deep-sea records. We therefore posit that the CIE magnitude was~7‰ in the surface ocean, and that theprevious~4‰ estimates for the CIE areattenuated by incomplete preservation and diagenetic overprinting. The large CIE magnitude in the surface ocean (~7‰) and the evidently smaller CIE magnitude registeredby deep-sea benthic foraminifera(~2-3.5‰) arelikely a function of rateand duration of carbon release as well as ocean stratification during the PETM.

58 GEOSCIENCES↗

Analyzing the upscaling potential and geospatial siting of calcination-free calcium hydroxide production in the United States

This study evaluates the techno-economic feasibility and the embodied carbon dioxide intensity (eCI) of a novel process for producing nominally pure (>95 mass %) calcium hydroxide without the need for the thermal calcination of limestone. The process relies on the aqueous extraction of calcium from alkaline industrial wastes following which portlandite (Ca(OH) 2 : CH, a.k.a. slaked lime or hydrated lime) is precipitated by application of a waste-heat based thermal swing. This approach takes advantage of the temperature dependent solubility of CH at ambient pressure. We evaluated the feasibility of implementing this process in the U.S. based on the geospatial availability of waste heat and slags as a Ca-source. For the base case, the cost of production of “Low-Temperature Portlandite (LTP)” is 2-to-3 times that of traditional portlandite (~$180/tonne). The main driver of cost is the electricity demand for reverse osmosis (RO) which is used to concentrate Ca-ions in solution, and the costs of membrane replacement. Our sensitivity analysis showed that parity with the cost of production of traditional portlandite is readily achievable by selecting membranes with better durability (i.e., better pH resistance) and flux (i.e., higher permeability) without sacrificing selectivity. Significantly, LTP features an eCI that is between 40%- and - 80 % lower than its traditional counterpart when electricity is sourced from natural gas combustion or wind power, respectively. Finally, our geospatial analysis reveals that there are three areas in the U.S. with the potential for implementation of industrial-scale facilities that could produce at least 50 tonnes of pure Ca(OH) 2 per day, while achieving a production cost of ~$270 per tonne of Ca(OH) 2 , owing to the proximity between slag feedstocks and waste heat sources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Anisotropic finite hyper-elastoplasticity of geomaterials with Drucker-Prager/Cap type constitutive model formulation

The formulation of large strain anisotropic hyper-elastoplasticity of geomaterials is examined. Attention is given to the role of structure tensors (also called fabric tensors), especially in context of the Eshelby-Mandel stress and large inelastic volume changes attributable to porosity. Both (hyper-)elastic and inelastic orthotropic symmetry, reducing to the particular case of transverse isotropy, are considered. Specific material assumptions and constitutive choices are identified for the development of a novel Anisotropic Drucker-Prager/Cap (ADPC) model formulated within the intermediate configuration consistent with multiplicative split of the deformation gradient. The model is calibrated to existing experimental measurements, including high pressure large strain triaxial compression of lithographic (Solnhofen) limestone and triaxial compression measurements on Tournemire shale assessing elastoplastic anisotropy. Manifest implications of constitutive theory are investigated, including consequences of recognizing (or not) the Eshelby-Mandel stress as energy conjugate to the plastic velocity gradient and including (or not) contribution from the skew-symmetric parts of the Mandel stress to the plastic anisotropy. Numerical simple shear experiments and large deformation simulated indentation experiments are provided in order to investigate model predictions and demonstrate the overall robustness in finite element modeling.

42 ENGINEERING↗

Bedrock architecture, soil texture, and hyporheic zone characterization combining electrical resistivity and induced polarization imaging

The shallow (<15 m depth) subsurface environment of a short reach along a bedrock stream was investigated with electrical resistivity and induced polarization (IP) to map details of bedrock and soil sediments. The bedrock is mostly comprised of limestone, and is generally resistive compared to the overlying soil. The soil-bedrock interface was determined through a trial and error approach using a sharp boundary feature in the inversion model. The inferred bedrock surface determined from the inversions exhibited undulating patterns with troughs and ridges. A near continuous trough ran alongside the stream within the floodplain, and is suggestive of a paleochannel among other interpretations of this feature. The structure of the electrical resistivity above the bedrock showed small-scale elongated features. The chargeability from the IP method showed larger scale features. High values of chargeability were associated with the sediments in the floodplain, and low values were associated with bedrock, stream, and soil on the elevated banks above the stream. If the chargeability is associated with membrane polarization characteristic of clayey soils, then IP seems to highlight the mere existence of clay, while the resistivity may be more discernable of the relative proportion of clay. Vegetation differences may also explain the chargeability distribution, where parts of the survey with high chargeability had dense pine with no understory making the soils more organically rich.

54 ENVIRONMENTAL SCIENCES↗

Fate and transport of uranium (VI) in weathered saprolite

We conducted batch and column experiments to investigate sorption and transport of uranium (U) in the presence of saprolite derived from interbedded shale, limestone, and sandstone sequences. Sorption kinetics were measured at two initial concentrations (C0; 1, 10 mM) and three soil:solution ratios (Rs/w; 0.005, 0.25, 2 kg/L) at pH 4.5 (pH of the saprolite). The rate of U loss from solution (mmole/L/h) increased with increasing Rs/w. Uranium sorption exhibited a fast phase with 80% sorption in the first eight hours for all C0 and Rs/w values and a slow phase during which the reaction slowly approached (pseudo) equilibrium over the next seven days. The pH-dependency of U sorption was apparent in pH sorption edges. U(VI) sorption increased over the pH range 4e6, then decreased sharply at pH > 7.5. U(VI) sorption edges were well described by a surface complexation model using calibrated parameters and the reaction network proposed by Waite et al. (1994). Sorption isotherms measured using the same Rs/w and pH values showed a solids concentration effect where U(VI) sorption capacity and affinity decreased with increasing solids concentration. Moreover, this effect may have been due to either particle aggregation or competition between U(VI) and exchangeable cations for sorption sites. The surface complexation model with calibrated parameters was able to predict the general sorption behavior relatively well, but failed to reproduce solid concentration effects, implying the importance of appropriate design if batch experiments are to be utilized for dynamic systems. Transport of U(VI) through the packed column was significantly retarded. We also conducted transport simulations using the reactive transport model HydroGeoChem (HGC) v5.0 that incorporated the surface complexation reaction network used to model the batch data. Model parameters reported by Waite et al. (1994) provided a better prediction of U transport than optimized parameters derived from our sorption edges. The results presented in this study highlight the challenges in defining appropriate conditions for batch-type experiments used to extrapolate parameters for transport models, and also underline a gap in our ability to transfer batch results to transport simulations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Coupling geophysical, geological, geochemical and mineralogical assessments to examine preferential contaminant transport pathways in interbedded fractured bedrock

This study shows that a multi-faceted approach, combining borehole geophysical logging and surface seismic P-wave first-arrival tomography with confirmatory coring, well installation, and chemical and mineralogical analysis, is effective for identifying difficult-to-locate preferential contaminant transport pathways in deeper fractured bedrock. Seismic tomography detected porous 10–20 m wide elongated fractured conduits that allow acidic groundwater contaminated with uranium (U) and nitrate (NO 3 - ) to migrate within interbedded shale-limestone bedrock over 1000 m from a former disposal facility (S-3 Ponds site) located at the DOE Y-12 National Security Complex in Tennessee (USA). Conventional drilling techniques would easily miss these conduits because they are oriented parallel with fractured bedding planes. Synchrotron analysis of aquifer solids revealed that > 95 % of the U is hexavalent (U VI ). This uranyl (UO 2 2+ ) species is coordinated with carbonate, iron oxide, silicate and phosphate minerals within cemented white to yellow precipitates, which contain U concentrations as high as ∼21.6 % by weight fraction. Identifying the presence of these mineral phases, enables a further understanding of the potential effectiveness of remediation actions. The combination of methodologies presented here can also be applied to other explorations, such as the detection of water supply.

Fate and transport↗

Numerical simulations of vertical growth of hydraulic fractures and brine migration in geological formations above the Marcellus shale

One of the critical environmental questions about hydraulic fracturing in shales is the potential for contamination of ground and surface water. There are two specific concerns arising from hydraulic treatments: 1) whether hydraulic fractures extend upward through overlying strata to reach overlying aquifers containing drinking water, and 2) whether injected fluids push native fluids upward into these overlying aquifers. In this work, the extent of likely fracture growth through overlying layers during hydraulic treatment of the Marcellus shale was estimated using a hydraulic fracture model. A wide range of material and fluid flow properties in a multi-layered geologic model was considered. The model was based on conditions and characteristics applicable to the Marcellus shale in that part of the Appalachian basin within southwestern Pennsylvania. Predictions of vertical termination frequencies for hydraulic fractures were used in a multi-layer model of the strata and natural fractures for studying brine migration through the natural and induced fracture network. NFFLOW, the software for explicitly modeling flow within networks of fractures, was utilized to compute transient flow rates according to the schedule of injected fluid during hydraulic fracturing. To aid our analysis, the modeled sequence of geologic strata was capped with a fictitious unfractured, but moderately-permeable layer, which serves as a monitoring zone. The analysis assumes one well lateral was placed in the middle of the Marcellus shale with hydraulic fractures penetrating layers in the model. The newly-developed geomechanical module within NFFLOW was used to represent stress-sensitivity of the fractures. This allows the opening and closing of fracture apertures with changes in fluid pressures within fracture segments. Pressure increases in the formations overlying the Tully limestone, indicating fluid flow, was observed due to the hydraulic stimulation; and the impact of these increased pressures on brine migration towards the surface was considered.

03 NATURAL GAS↗

Evidence for metal sources, fluid-mixing processes, and S isotope recycling within the feeder zone of an Irish type Zn-Pb deposit

The origin and evolution of fluids in Irish-type Zn-Pb deposits remains debated, particularly regarding the mobility of metals such as Cu and Ni, sources of sulphur, and the role of fluid mixing and replacement. The Lisheen Zn-Pb deposit, Ireland, offers a well-defined natural laboratory to investigate these questions. While most studies have focused on the Waulsortian Limestone Formation, the primary sulphide host, less is known about mineralisation in underlying units, such as the Lisduff Oolite Member (LOM). The LOM displays enrichment in Cu and Ni and displays intense replacement textures compared to other hosts at Lisheen, making it an ideal target for studying metal mobility and sulphur recycling in carbonate-hosted systems. Through characterising and studying LOM-hosted sulphides, valuable insights into mineralisation processes, especially related to Cu-Ni metals, can be defined. This study integrates petrography, EMPA, and in situ sulphur isotope (δ 34 S) analysis to investigate sulphide paragenesis, mineral chemistry, and fluid evolution across LOM ore zones. Results reveal a multistage mineralising system involving extensive replacement of early pyrite (Py0, δ 34 S = −28.4 to −21.9 ‰) by sphalerite and galena, with zoned pyrite (Py1) enriched in As-Cu-Ni-Tl. The δ 34 S values and trace element trends indicate mixing between hydrothermal and bacteriogenic sulphur-rich fluids, with evidence for sulphur recycling during replacement. Pyrite textures and compositions capture this evolving fluid regime, with trace element enrichment linked to paragenetic stage. The steel ore region, adjacent to major fault intersections, records intense hydrothermal fluid interaction, hosting Ni- and As-rich phases such as nickeline, gersdorffite, and arsenopyrite. These findings highlight the importance of structural controls and fluid mixing in metal transport and deposition, positioning the LOM as a key stratigraphic unit for understanding ore-forming processes in Irish-type systems. These results have implications for targeting similar carbonate-hosted systems globally, especially where deeper or structurally complex ore zones remain underexplored.

58 - GEOSCIENCES↗

Carbon dioxide/water foams stabilized with a zwitterionic surfactant at temperatures up to 150 °C in high salinity brine

According to the article, stabilization of CO 2 -in-water (C/W) foams with surfactants at high temperature and high salinity conditions is challenging given limitations in the solubility and thermal stability of surfactants, particularly for surfactants other than anionic ones. Here we show that a single zwitterionic surfactant, cetyl betaine (CH 3 (CH 2 ) 15 N + (CH 3 ) 2 CH 2 COO - ), stabilizes viscous C/W foam (>15 cP) in crushed limestone (76-Darcy) at a temperature up to 150 °C and over a wide range in salinity up to 22% total dissolved solids (TDS) at superficial velocity of 940 ft/day. According to liquid chromatography mass spectrometry (LC/MS), cetyl betaine has high thermal stability with negligible chemical degradation after incubation at 135 °C for 30 days. Interfacial tension (IFT) at the C/W interface was reduced significantly from ~37 mN/m to <5 mN/m with the addition of 0.08 mmol/L of cetyl betaine. Relative to ionic surfactants, the relatively weak electrostatic repulsion between the local charges in the headgroup is shown to produce strong adsorption at the C/W interface (~134 Å2/molecule), resulting in generation of viscous foam (~6 cP) even in pure water without added salt. At a low superficial velocity of 6 ft/day (shear rate 45 s -1 ) in a beadpack, foam was still formed with cetyl betaine. Static adsorption of cetyl betaine on carbonates was on the order of 1 mg/m 2 , and core flood test also proved that cetyl betaine could stabilize viscous C/W foam (>20 cP) within 6 pore volumes of injection at 120 °C. The surfactant stabilized viscous C/W foam at low oil fractions and broke in the presence of large fractions of oil, both of which are desirable in CO 2 mobility control and oil displacement. The ability to form foams at high temperatures and over a wide range in salinity is important for various practical applications including CO 2 enhanced oil recovery, fracturing with energized fluids and CO 2 sequestration.

nuclear (including radiation effects), carbon sequ↗

Comparison of biofuel life-cycle GHG emissions assessment tools: The case studies of ethanol produced from sugarcane, corn, and wheat

The use of alternative fuels, particularly bio-based fuels, has been an important strategy to achieve greenhouse gas (GHG) emission reductions compared to petroleum-based fuels. However, discrepancies between results obtained by using different attributional life-cycle assessment (LCA) tools have challenged the credibility of the individual assessments, and as result, the progress towards or compliance with GHG mitigation targets. The objective of this study was to identify the main differences and commonalities in methodological structures, calculation procedures, and assumptions for the major commercial biofuel, ethanol, across three public LCA tools, BioGrace (EU), GHGenius (Canada), and GREET (U.S.), and a research-oriented fourth, the Virtual Sugarcane Biorefinery (VSB), a Brazilian platform for sugarcane ethanol assessments. The calculated emissions across models ranged from 16 to 45 for sugarcane, 43-62 for corn, and 45-68 g CO 2 eq MJ -1 for wheat ethanol. Harmonizing the three public models with VSB assumptions for sugarcane ethanol produced in Brazil, the range was reduced to 16-17 g CO 2 eq MJ -1 for sugarcane ethanol. Agricultural production (e.g., N 2 O emissions from fertilizers; energy and fuel use; straw field-burning; and limestone application) and ethanol shipping were found to be the major causes for variations for differences calculated for sugarcane ethanol. Similarly, harmonizing BioGrace and GHGenius calculations using GREET assumptions for U.S. corn ethanol generated nearly identical results (models varied within a 3% range). The coproduct treatment method was found to be the most influential parameter in the variations calculated for both corn and wheat ethanol. The application of the tools as part of GHG emissions accounting requirements is often defined via regulations and differences and/or conflicting assumptions set-forth in these models lead to most differences observed. Our study provides recommendations for promoting transparency in LCA calculations and assumptions across the tools used in research and development or for regulatory tools regarding biofuels.

09 BIOMASS FUELS↗