Search NASA⌕ Search

SEARCH · Search NASA

Results for “macroscale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

A dislocation-based crystal plasticity framework for dynamic ductile failure of single crystals

We developed a framework for dislocation-based viscoplasticity and dynamic ductile failure to model high strain rate deformation and damage in single crystals. The rate-dependence of the crystal plasticity formulation is based on the physics of relativistic dislocation kinetics suited for extremely high strain rates. The damage evolution is based on the dynamics of void growth, which are governed by both micro-inertia as well as dislocation kinetics and dislocation substructure evolution. Furthermore, an averaging scheme is proposed in order to approximate the evolution of the dislocation substructure in both the macroscale as well as its spatial distribution at the microscale. In addition, a concept of a single equivalent dislocation density that effectively captures the collective influence of dislocation density on all active slip systems is proposed here. Together, these concepts and approximations enable the use of semi-analytic solutions for void growth dynamics developed in [J. Wilkerson and K. Ramesh. A dynamic void growth model governed by dislocation kinetics. J. Mech. Phys. Solids, 70:262–280, 2014.], which greatly reduce the computational overhead that would otherwise be required. The resulting homogenized framework has been implemented into a commercially available finite element package, and a validation study against a suite of direct numerical simulations was carried out.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Study of the interplay between lower-order and higher-order energetic strain-gradient effects in polycrystal plasticity

in this report strain-gradient (SG) plasticity refers to a class of non-local theories in which gradients of plastic slip determine the storage of geometrically necessary dislocations, introducing a length-scale dependence in the mechanical behavior of crystalline materials, which is otherwise lacking in local theories. In this work, we incorporate lower-order (LO) and higher-order energetic (HOE) strain-gradient effects into a crystal plasticity fast Fourier transform (FFT)-based formulation to investigate the interplay of the length scale that each strain-gradient term introduces at the microscale, and the mechanical properties that result at the macroscale. For an applicable range of length scales, we consider two systems: a 1-D two-phase face centered cubic (FCC) laminate and a 3-D FCC polycrystal, and two uniaxial deformation modes: monotonic tension and cyclic tension–compression. We show that increases in the individual LO and HOE length scales increase the hardening rate and strength of the material, respectively. When combined, the strong LO hardening is less pronounced than the effect alone due to the lowering of the gradients due to the HOE microstress. We demonstrate that the LO and HOE hardening manifest as “isotropic” (yield surface expansion) and “kinematic” (yield surface shift) effects, respectively, consistent with their theoretical origins. We show that in cyclic loading, the Bauschinger effect emerges in both local and non-local calculations and link its origins and severity to the behavior in the strain field, slip-system rates, and the HOE microforce.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Insights into scale translation of methane transport in nanopores

Accurate prediction of flow behavior in shale matrix is critical for efficient development of shale gas reservoirs. In these systems, the majority of pores are in the nano-size range. As a result, continuum-based approaches may not be appropriate to simulate flow in such systems. Molecular dynamics (MD) simulations are capable of capturing the relevant microscale physics. Their relatively high computational expense, however, restricts MD simulations to rather small systems and domains. This limitation creates a gap between computational need of macroscale systems and capabilities of MD simulations. The lattice Boltzmann method (LBM) is a suitable candidate to bridge this gap. In this work, the multiple-relaxation-time (MRT)-LBM is used to study methane transport in nano-size pores. Adsorption effects near solid boundaries, as well as non-ideal behavior of fluids, are accounted for via incorporating appropriate force terms in LBM. In this work, parameters associated with the force terms in the equation of state are studied in detail, and a workflow is proposed to determine optimal values of these parameters for gas flow in slit pores. Specifically, we establish these parameters such that the range of density values that the model is able to simulate is maximized. We demonstrate this workflow by simulating gas flow where velocity and density profiles from MD simulations are used as reference data. Results from LBM simulations are in good agreement with MD reference data for pores that are 4 nm in width or larger. Moreover, we propose a preconditioning scheme to improve the stability of LBM in dealing with complex geometries. The robustness of this scheme is demonstrated by simulating several roughness geometries. This work motivates the use of LBM in scale translation of the physics of mass transport in more complex permeable media.

03 NATURAL GAS↗
DOE OSTI2025

3D pore structure reconstruction of fluff region in top of EBR-II irradiated fuel by X-ray micro-computed tomography

Metallic fuels comprised of U-Zr binary and U-Pu-Zr ternary alloys are a promising fuel candidate for sodium-cooled fast reactors and possess many advantages over ceramic fuels such as higher uranium density and improved thermal conductivity. Fluff is a highly porous structure forming at the top of metallic fuel slugs during irradiation and was extensively observed in past sodium-cooled fast reactor (SFR) experiments such as Idaho National Laboratory’s Experimental Breeder Reactor II (EBR-II). Previous investigations have shown that fluff is rich in fissile atoms and hence could have neutronics implications, but its formation mechanisms are not understood. In this work, two cube-shaped lift outs were taken from the fluff and bulk fuel regions of a high burnup U-19Pu-10Zr composition EBR-II fuel slug and characterized by micro computed tomography (Micro-CT) and energy dispersive x-ray spectroscopy (EDS). This was used to characterize differences in microscale porosity and composition between fluff and bulk fuel, and to support or oppose postulated fluff formation mechanisms. Surface EDS showed minimal differences between the elemental compositions of the fluff and fuel cubes. However, three-dimensional (3D) pore analysis from the tomography scans showed significant differences between the fluff and fuel cube pore size distributions at the microscale level. The high porosity and irregular pore distribution seen in macroscale fluff was also present within the micro-scale fluff cube, having a much higher porosity than the fuel cube which was concentrated in a few large pore networks. In conclusion, these results indicate support for a creep driven mechanism of fluff formation.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Spectrum of Dirac eigenvalues across QCD chiral transition

Here, we show that the universal scaling properties of the chiral phase transition in quantum chromodynamics (QCD) at the macroscale are encoded in the microscopic energy levels of the quarks in the background of gluon fields, defined as eigenvalues of the Dirac operator. We introduce a novel relation between the cumulants of the chiral condensate, and the correlations among the energy levels of quarks, i.e., the eigenspectra of the massless QCD Dirac operator. This relation elucidates how the fluctuations of the chiral condensate arise from the correlations within the infrared part of the energy spectra of quarks, and naturally leads to a generalization of the Banks-Casher relation for the cumulants of the chiral condensate. Then, through (2+1)-flavor lattice QCD calculations using HISQ action with varying light quark masses around the chiral phase transition temperature, we demonstrate that the correlations among the infrared part of the Dirac eigenvalue spectra exhibit same universal scaling behaviors as expected of the cumulants of the chiral condensate. We find that these universal scaling behaviors extend up to the physical values of the up and down quark masses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Characterization of microstructure and texture across dissimilar super duplex/austenitic stainless steel weldment joint by super duplex filler metal

In the present paper, microstructural changes across an as-welded dissimilar austenitic/duplex stainless steel couple welded by a super duplex stainless steel filler metal using gas tungsten arc welding process is characterized with optical microscopy and electron back-scattered diffraction techniques. Accordingly, variations of microstructure, texture, and grain boundary character distribution of base metals, heat affected zones, and weld metal were investigated. The results showed that the weld metal, which was composed of Widmanstätten austenite side-plates and allotriomorphic grain boundary austenite morphologies, had the weakest texture and was dominated by low angle boundaries. The welding process increased the ferrite content but decreased the texture intensity at the heat affected zone of the super duplex stainless steel base metal. In addition, through partial ferritization, it changed the morphology of elongated grains of the rolled microstructure to twinned partially transformed austenite plateaus scattered between ferrite textured colonies. However, the texture of the austenitic stainless steel heat affected zone was strengthened via encouraging recrystallization and formation of annealing twins. At both interfaces, an increase in the special character coincident site lattice boundaries of the primary phase as well as a strong texture with <100> orientation, mainly of Goss component, was observed. - Graphical abstract: Display Omitted - Highlights: • Weld metal showed local orientation at microscale but random texture at macroscale. • Intensification of <100> orientated grains was observed adjacent to the fusion lines. • The austenite texture was weaker than that of the ferrite in all duplex regions. • Welding caused twinned partially transformed austenites to form at SDSS HAZ. • At both interfaces, the ratio of special CSL boundaries of the primary phase increased.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurements

Recent advances in spherical indentation stress-strain protocols and analyses have demonstrated the capability for measuring reliably the local mechanical responses in polycrystalline metal samples at different length scales, ranging from sub-micron (regions within individual grains) to several hundreds of microns (regions covering several grains). These recent advances have now made it possible to study systematically the mechanical behavior of a single material system at different length scales, with tremendous potential to obtain new insights into the role of individual phases, interfaces, and other microscale constituents on the macroscale mechanical response of the material. In this paper, we report spherical indentation stress-strain measurements with different indenter sizes (microns to millimeters) on Ti-6Al-4V (Ti-64) which capture the mechanical response of single phase alpha-Ti-64, single colony (alpha-beta), few colonies, and many colonies of Ti-64. The results show that the average mechanical response (indentation modulus and yield strength) from multiple indentations remains relatively unchanged from single phase alpha to many colonies of Ti-64, while the variance in the response decreases with indenter size. In conclusion, the work-hardening response in indentation tests follows a similar behavior up to indentation zones of many colonies, which shows significantly higher work hardening rates.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Data-driven reduced-order models for rank-ordering the high cycle fatigue performance of polycrystalline microstructures

Computationally efficient estimation of the fatigue response of polycrystalline materials is critical for the development of next generation materials in application domains such as transportation, health, security, and energy industries. This is non-trivial for fatigue of polycrystalline metals since the initiation and growth of fatigue cracks depends strongly on attributes of the microstructure, such as the sizes, shapes, orientations, and neighbors of individual grains. Furthermore, regions of microstructure most likely to initiate cracks correspond to the tails of the distributions of the microstructure features. This requires the execution of large numbers of experiments or simulations to capture the response of the material in a statistically meaningful manner. In this work, a linkage is described to connect polycrystalline microstructures to the statistically signified driving forces controlling the high cycle fatigue (HCF) responses. This is achieved through protocols that quantify these microstructures using 2-pt spatial correlations and represent them in a reduced-dimensional space using principal component analysis. Reduced-order relationships are then constructed to link microstructures to performance characteristics related to their HCF responses. As a result, these protocols are demonstrated for α-titanium, which exhibits heterogeneous microstructure features along with significant elastic and inelastic anisotropies at both the microscale and the macroscale.

2-point correlations↗
DOE OSTI2026

Controlling homogenization length scales and microstructure in additively manufactured Ti-Ta functionally graded materials

Materials with smooth compositional gradients or functionally grade materials (FGMs) produced via additive manufacturing (AM), enables joining dissimilar materials and optimizing multiple properties in advanced engineering applications. However, as-printed AM microstructures exhibit micro-segregation and solidification defects which, when combined with controlling macroscale gradient properties, complicates necessary post-processing. Here, we use CALPHAD-informed diffusion modelling to design post-processing heat treatments for lightweight to refractory FGMs. Ti-Ta (0 to 85 at. % Ta) FGMs were fabricated using laser-based directed energy deposition AM. Post-processing heat treatments at 1000° C and 1500° C were designed to promote homogenization across specific length scales and experimentally validated. Investigation of chemical segregation and microstructures demonstrated that the length scale of homogenization is controlled as a function of time, temperature, and local composition. Ta-rich regions exhibited incomplete homogenization compared to Ti-rich layers. Unmelted Ta particles were found to completely dissolve at 1500 °C. By controlling cooling rate (200 °C/min), martensitic structures were produced between 14–36 at. % Ta, consistent with martensite-start temperatures calculations, while furnace cooling (2 °C/min) produced α+β morphologies. This work establishes a validated predictive framework for designing post-processing to tailor microstructure and chemical architecture in AM FGMs, facilitating their deployment in demanding environments.

Materials science↗
DOE OSTI2024

Physical origins of the varying performance and unusual transport behaviors among thermoelectric A Mg 2 Sb 2 materials ( A = Ca, Sr, Sm, Yb, and Mg)

Contrary to the similar thermoelectric performance among both AZn 2 Sb 2 and AMg 2 Bi 2 compounds, their isostructural counterparts, AMg 2 Sb 2 , can exhibit thermoelectric figure of merit values that vary by orders of magnitude with different A elements. Here, we reveal physical origins accounting for the significantly differing performance among AMg 2 Sb 2 -based compounds (A = Ca, Sr, Sm, Yb, and Mg) through comprehensive analyses, where it is shown that the dispar- ities in performance at the macroscale essentially originate from the widely varying activation energies that equal amounts of dopant can induce. Meanwhile, a few unusual transport behaviors regarding electrical conductivity, carrier concentration, or lattice thermal con- ductivity among these compounds have been identified, and we also present their rationales in depth. Furthermore, this mechanism-focused study can not only promote further understanding of the complex transport behaviors in condensed matter but be instrumental in rationally tun- ing the physical properties of materials as well.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review

Understanding geomechanical properties of shales, such as stiffness properties and fracture toughness, is important in different areas of petroleum industry-related activities. Nanoscale to microscale experiments on shale samples require a much smaller sample compared to macroscale experiments. This is a major advantage because irregularly-shaped drill cuttings from shales can be used for experimental analyses, such as nanoindentation or atomic force microscopy (AFM). However, characterization of mechanical properties at the nano- to micro-scale is a relatively new addition to classical geomechanical experiments on shales, and there is still a lack of both fundamental knowledge and standard procedures for conducting experiments at this scale. The theoretical principles of nanoindentation-based (Gridded Nanoindentation and Modulus Mapping) and AFM-based experimental methods (PeakForce QNMTM and AFM-IR), a review of the literature results and the major findings are explained in Sections 2 and 3, respectively. These experimental techniques are compared in Section 4. Overall, nanoindentation experiments reveal the anisotropy of organic matter (OM)-rich shales at the nanoscale, and it is shown that gridded nanoindentation is capable of characterizing different minerals with respect to their stiffness properties. The capability of AFM (PeakForce QNMTM) to differentiate between different minerals within OM-rich shales with distinct mechanical properties, in particular stiffness, is also demonstrated. It is shown that AFM-based methods are more straightforward than gridded-nanoindentation to characterize OM-rich shales based on the stiffness of different constituent minerals of OM-rich shales, but nanoindentation can apply higher loads than AFM-based methods. Therefore, they can measure creep properties and fracture toughness of OM-rich shales. Here, it is shown that the OM is the most compliant part of the OM-rich shales, but it is still unclear if thermal maturation has an impact on the stiffness of OM. It is necessary to investigate if there is a relationship between the OM type (kerogen, bitumen, etc.) and mechanical properties such as Young’s modulus and Creep rate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Control of solvent adsorption in porous liquids through solvent-solvent interactions

Type 3 Porous Liquids (PLs) are a new class of materials that offer transformative potential for gas capture and utilization. These PLs are comprised of a bulky solvent with a suspended empty nanoporous material that enables selective and high-capacity capture from dilute and complex gas steams. The relationship between the nanoporous material, the structure of the solvent molecules, and the time dependence of solvent adsorption into the nanoporous material governs long term adsorption properties. Herein, molecular dynamics (MD) calculations evaluated the solvent dynamics of nine neat solvents with a broad range of chemical identities and experimental density measurements probed the time-dependent adsorption of these solvents into the ZIF-8 metal-organic frameworks (MOFs) to form PL dispersions over three weeks. Two of the nine dispersion, using glyceryl triacetate and 2’-hydroxyacetopheneone as solvents, presented sufficiently low solvent infiltration—characterized by solvent adsorption less than 40% of the ZIF-8 pore volume—to be viable as PLs. The experimental solvent adsorption data for ZIF-8 dispersed in the four aromatic solvents (acetophenone, methylbenzoate, 2-isopropylphenol, and 2’-hydroxyacetophenone) was fit to a kinetic model to quantify rate of solvent adsorption into ZIF-8. The rates of adsorption of these four similar-sized solvents demonstrated that solvent adsorption is slowed and limited by solvent clustering dynamics that are, in turn, driven by intermolecular hydrogen bonding. Ultimately, experimental solvent sorption measurements indicated that glyceryl triacetate and 2’-hydroxyacetophenone with ZIF-8 formed PLs with the most stable porosity and the greatest potential for gas capture. In conclusion, the combined experimental-computational materials exploration framework used here reveals a novel relationship between molecular scale solvent dynamics and macroscale solvent adsorption kinetics critical for the discovery and rapid evaluation of Type 3 PL compositions.

Hydrogen bonding↗
DOE OSTI2010

Texture crossover : trace from multiple grains to a subgrain.

Neutron and synchrotron X-ray diffractions were used to study the texture development in the face-centered-cubic nickel-based superalloy over gauge volumes ranging from hundreds of cubic millimeters down to sub-cubic micrometers. The bulk averaged results find a uniform texture development from collective slip. However, X-ray microbeam studies at microscale find that the plastic deformation within a single grain is mediated by limited slip, as evidenced by the local strain distribution. Polychromatic microdiffraction shows the formation of several distinct structural zones even in the same grain. A hierarchical heterogeneous geometrically-necessary dislocations arrangement and distinct slip bands are observed within each grain. A depth-dependent change of the stereographic projection within the slip band in the grain is demonstrated. Correlated oscillations of the lattice orientation at the submicron scale evolve into an overall texture at the macroscale. Possible reasons for this observed structural evolution are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elucidating texture and grain morphology contributions to the micromechanical response of additively manufactured Inconel 625

Microstructural variation of additively manufactured (AM) metal components in comparison to wrought counterparts makes certification for critical applications a challenge. Microscale simulations leveraging modern computational tools may be used to supplement testing of AM microstructures, thus accelerating certification by reducing the number of experiments needed. However, as micromechanical response is closely tied to critical properties like fatigue-life and fracture, utilization of these simulations with macroscale experimental data alone is insufficient. One means to attain microscale experimental data is in situ diffraction data collected from synchrotron X-ray sources. In this work, such data were collected during in situ compression of AM Inconel 625 superalloy. Interpretation of experimental results was assisted by massive (8M element) complementary micromechanical simulations performed on sets of virtual microstructures generated using cellular automata. Together, micromechanical data from diffraction experiments and simulations were used to probe the effects of textured “track” microstructures generated during laser powder bed fusion and directional strength-to-stiffness on micromechanical response. Though fiber-averaged directional strength-to-stiffness ratios were expected to dominate given the high elastic anisotropy of the material, the combination of small variations in texture and specific grain configurations unique to AM microstructures lead to significant variability in micromechanical response after yield. The findings emphasize the importance of high-fidelity microstructural representation that captures key texture components and AM-specific morphology for property prediction of AM metals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Simultaneously improved electrical and mechanical performance of hot-extruded bulk scale aluminum-graphene wires

Aluminum-based alloys are highly sought after as lightweight alternatives in electric grid applications. Improving the electrical conductivity of aluminum alloys has the potential to increase the energy efficiency of power transport. Here we used a hot extrusion process to synthesize AA1100 alloy with low-cost reduced graphene oxide nanoparticles to manufacture ultra-conductive aluminum composites in this study. The effects of graphene content on the electrical and mechanical performance of the composites were evaluated. The macroscale AA1100/graphene wires demonstrated a 2.1% enhancement in electrical conductivity at 20 °C, while the ultimate tensile strength increased by 6.1%. A Zener-Hollomon model was used to confirm the in-process exfoliation of the agglomerated graphene nanoparticle feedstock into high electrical conductivity graphene-like flakes during extrusion. They may have provided high-velocity carrier pathways leading to the enhanced electrical performance of the alloy. Transmission electron microscopy at aluminum-graphene interfaces ensures the preclusion of detrimental carbide formation during composite synthesis while confirming the structure graphene-like flakes. The in-process exfoliation provides an economically viable technique to produce bulk scale graphinated aluminum composites for advanced application and can be applied more generally to other alloy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dual-pace transient heat conduction in vertically aligned carbon nanotube arrays induced by structure separation

Vertically aligned arrays of carbon nanotubes (CNTs) are attractive for a wide range of macroscopic applications which can exploit the remarkable properties of individual nanotubes. In this work, an abnormal behavior of CNT bundles in heat conduction is discovered under the transient electro-thermal characterization. The measured voltage change over the sample shows a dual-pace thermal response (DTR), which could not be fitted using a single thermal diffusivity heat transfer model. Instead, two thermal diffusivities are determined from the DTR phenomenon. Three rounds of cryogenic experiments are conducted to investigate the physics behind DTR phenomenon. It starts to emerge when the temperature is reduced to a certain level. After two rounds of cryogenic experiments, the DTR phenomenon becomes permanent from 295 K to 10 K. The nano-scale structure separation induced by the increased thermal strain leads to macroscale structure separation, which results in two parallel heat conduction paths responsible for the DTR phenomenon. By building a new parallel heat transfer model taking both the transient and steady-state electrical and thermal response into consideration, the area ratio of separated CNTs is determined. Furthermore, this result uncovers the existence of coiled morphology and nano-structure evolution of CNTs under cryogenic state and its effect on thermal and electrical transport, especially on their transient behaviors. Knowledge of the thermal transport in these CNTs arrays is important considering the fact that transient thermal response strongly affects their mechanical, optical, and electrical behaviors.

42 ENGINEERING↗