Search NASA⌕ Search

SEARCH · Search NASA

Results for “manufacturing technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mechanical Characteristics of Additively Manufactured ODS 316L and 316H Alloys with and Without Post-build Processing

This research aims to explore an accelerated development path for oxide dispersion-strengthened (ODS) alloys by integrating additive manufacturing (AM) technologies with recent advances in ODS materials and traditional manufacturing methods. Novel AM and post-build processing routes have been developed for ODS austenitic alloys, specifically Fe-Cr-Ni alloys like 316L and 316H. Electron microscopy and mechanical characterizations were conducted to evaluate the effects of process variables on microstructure and properties, aiming for an economically feasible route property optimization. Traditionally, ODS alloy production involves multi-day high-energy mechanical milling of alloy powder with yttria (Y 2 O 3 ) followed by powder consolidation via extrusion or other methods and additional thermomechanical processing (TMP) for property control. Here, to address these challenges associated with this complex and costly approach, we propose exploring alternative, cost-effective processing routes focusing on AM and traditional TMP methods. The new ODS alloy processing routes have achieved up to a 400% increase in yield strength and a 60% increase in ultimate tensile strength compared to wrought stainless steels while still maintaining significant ductility and fracture toughness. This paper details the novel and economical AM-based processing routes for ODS austenitic alloys, combined with post-build TMPs, and discusses the mechanical and microstructural characteristics of the developed materials.

Byun, Thak Sang [Oak Ridge National Laboratory (OR↗
DOE OSTI2026

BIL High Speed Fuel Cell Stack Manufacturing

General Motors LLC (GM) was awarded a project to develop and implement technologies for manufacturing 20,000 units of Fuel Cell Stacks per year on two shifts per day basis. GM leveraged prior in-house expertise in designing the Fuel Cells, deploying the manufacturing process steps in the laboratory environment as well as the deployment in the industrial environment on a smaller scale. The project focus was to design, build, and deploy a manufacturing line consisting of an anode and cathode electrode processing, unitized electrode assembly, fuel cell stacking, compression, testing, and final assembly of the fuel cell stack. The project was terminated in the first budget period.

08 HYDROGEN↗
DOE OSTI2026

The Manufacture of Advanced Key Energy Infrastructure Technologies (MAKE IT) Prize (Final Technical Report)

This is a final technical report for the American-Made Manufacture of Advanced Key Energy Infrastructure Technologies (MAKE IT) Prize, developed by the U.S. Department of Energy (DOE) Office of Technology Commercialization (OTC) in collaboration with the Office of Clean Energy Demonstrations (OCED) and the Office of Energy Efficiency and Renewable Energy (EERE) with support from the National Laboratory of the Rockies (NLR). The MAKE IT Prize aims to catalyze domestic manufacturing of critical energy technology components, moving manufacturing facilities from planning to shovel-ready and enabling strategies for vibrant manufacturing activities in communities. This prize was launched with a prize pool of approximately $30 million spread across two tracks: Facilities and Strategies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Manufacturing Valuable Coal-Derived Products in Southern Appalachia

This project’s objective is to develop and deploy new technologies for manufacturing rare earth elements (REE), critical minerals (CM), and valuable non-fuel, carbon-based products (CBP) from coal and/or coal waste in the SoApp Basin, thus revitalizing distressed SoApp coal communities and reducing reliance on foreign imports of REE and CM. Resource availability and technological advances alone will not ensure this objective is met. The right mix of business climate, market forces, and policy will also be needed. This report identifies the critical technologies, infrastructure, supply chains, human capital, and policy gaps that must be addressed to manufacture REE, CM, and CBP from coal resources and wastes in SoApp The primary goal of the project is to characterize the resource base in the SoApp Basin.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Cost-Benefit Assessment of Additive Manufacturing for Injection Molds

This report presents an additive-manufacturing (AM) technology, where AM Cyclic Olefin Resin (COR) molds would be used for injection molding. The National Laboratory of the Rockies (NLR) team has focused on the costs and economics of this developing technology. This report presents a cost-benefit analysis of using the polySpectra AM COR molds made of COR, at the start of the project (Present') and the potential lifetime, cost-effectiveness, and performance by the end of the project period (Period 3'). The analysis of the AM COR molds is compared to traditional Computer Numerical Control (CNC) machined aluminum molds across the time periods. A cost-benefit model framework has been developed to evaluate AM COR molds. This model accounts for mold delivery to customers, current and future levels of technology readiness, the type of material injected, and various business cases. AM COR molds offer a major advantage in lead time, reducing production setup from weeks or months (with CNC machining) to as little as two to five days. This enables faster prototyping, quicker design cycles, and accelerated time-to-market, critical in industries like electronics, aerospace, medical devices, and automotive. Even modest improvements in the durability of polySpectra AM COR molds show the potential for these molds to complement traditional tooling. With further development, AM COR mold technology could provide significant time and cost savings while supporting increased domestic manufacturing capacity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

High speed vibration compensation using magnetic fiducials via NIMBLE

Additive manufacturing (AM) technology, specifically 3D printing, holds great promise for in-orbit manufacturing. In-space printing can significantly reduce the mass, cost, and risk of long-term space exploration by enabling replacement parts to be made as needed and reducing dependence on Earth. However, printing in a zero-gravity environment poses challenges due to the absence of a rigid ground for the print platform, which can result in vibrational and rotational forces that may impact printing integrity. Here, to address this issue, this paper proposes a novel linear magnetic position tracking algorithm, named Navigation Integrating Magnets By Linear Estimation (NIMBLE), for dynamic vibration compensation during 3D printing of truss structures in space. Compared to the most commonly used nonlinear optimization method, the NIMBLE algorithm is more than two orders of magnitude faster. With only a single 3-axis magnet sensor and a small NdFeB magnet, the NIMBLE algorithm provides a simple and easily implemented tracking solution for in-orbit 3D printing.

3D printing in space↗
DOE OSTI2021

Additive manufacturing of power poles using bamboo-polymer composites: A quick solution for power grid restoration

Polymer additive manufacturing (AM) technology is rapidly growing and its transition to become an advanced manufacturing technique now offers possibilities for unconventional applications. One of these potential applications is on site additive manufacturing of power poles. During natural incidents such as storms and hurricanes, power lines can be severely damaged and there may not be sufficient spare power poles to replace. In such situations, additive manufacturing of power poles on site can offer a fast, temporary solution during emergencies. The ability of freeform manufacturing of parts with complex geometries makes large scale AM attractive for various applications; however, due to residual stress build up and need for different mechanical requirements for different applications, reinforcement of the AM feedstock is necessary. In addition to carbon and glass fibers, bio-derived fibers can also be used as a reinforcing phase, both to utilize the natural resources at the emergency area and in terms of long-term sustainability. In this project, design and additive manufacturing of a 13.1 m power pole was demonstrated. Three different feedstock material options (polystyrene, cellulose ester and polycarbonate reinforced with glass and bamboo fibers) and two different pole designs were investigated. As-printed part tensile properties both in printing and interlayer directions were measured and a power pole was printed as six pieces and put together successfully. Finally, a conceptual design of a portable power pole manufacturing approach was proposed.

Tekinalp, Halil↗
DOE OSTI2024

DOE provides targeted technical assistance for manufacturers pursuing energy and resource efficiency

The U.S. Department of Energy (DOE) is committed to providing the industrial sector with resources and funding to support the development of innovative new technologies and processes. Previously, DOE’s Advanced Manufacturing Office was the front door of the department for many manufacturers. This office focused on two main missions: driving innovation in manufacturing technologies, and reducing energy and emissions related to manufacturing. These missions complemented each other in many ways, but as attention in these areas grew, so too did the need for specialization. In October 2022, the Advanced Manufacturing Office was reorganized into two new offices: the Advanced Materials and Manufacturing Technologies Office (AMMTO) and the Industrial Efficiency and Decarbonization Office (IEDO). For emissions-heavy industries, such as ceramics and glass, the latter office provides research and development funding, technical assistance, and demonstration support to help manufacturers along their journey to reduce emissions and increase resource efficiency. This article overviews the portfolio of resources applicable to ceramic and glass manufacturers through IEDO, including programs that were portioned into this office during the split and new offerings that were added since then. These programs and resources include energy management support, technology-specific guidance, and in-plant technical assistance.

Source record↗
DOE OSTI2021

Embedding Sensors in 3D Printed Metal Structures

The Transformational Challenge Reactor (TCR) program is leveraging recent advances in modeling and simulation, materials, and additive manufacturing (AM) technologies to design a modern nuclear reactor. Some of the main TCR technologies include in situ monitoring and the integration of sensors during the manufacturing of quality-significant nuclear reactor components. This report describes the general procedure and process optimization for embedding sensors within generic stainless steel 316 (SS316) components using laser powder bed fusion (LPBF). A more detailed, quality-significant test plan and supporting procedures are available upon request (ORNL/TM-2021/2127). LPBF involves the use of a scanning laser to selectively melt regions of a powder bed, additively building a part layer by layer. This report describes the LPBF processing technique and discusses the effects of LPBF processing parameters on the success of the sensor embedding process. Experiments used machined cavities in the form of channels in an SS316 base for the sensors to lay in while material is additively built over the top, thereby embedding them in an SS316 matrix. A preliminary investigation involved using empty SS316 sheaths as surrogates to explore the effects of various LPBF processing parameters and the dimensional requirements of the machined channels. Microstructural investigations showed that a smaller channel width/depth combination closer to the sensor’s diameter was best for the embedding process. After the desired parameters were selected, Type-K thermocouples were embedded and evaluated post-embedding using nondestructive thermal testing, as well as destructive sectioning and microscopy. Post-build characterization showed that the thermocouples were well-bonded to the SS316 matrix and were fully functional after embedding. During thermal testing to temperatures up to 500 °C, the embedded thermocouples read consistently with one another and deviated only slightly from the readings of a nonembedded thermocouple located within the furnace. This slight discrepancy was most likely due to differences in the thermal time constants for a nonembedded thermocouple vs. a thermocouple embedded in a solid SS316 block. The results presented in this report will serve as the foundation for future work that will focus on embedding sensors in relevant TCR reactor components and eventually testing those components under neutron irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

DOE EERE AMO Electrochemistry for Manufacturing (Workshop Report)

The Advanced Manufacturing Office (AMO) aims to improve the efficiency, productivity, environmental impact, and competitiveness of the manufacturing sector. The use of electrochemistry in manufacturing could help AMO achieve these goals with its potential to have significant impact on sustainability, energy and carbon efficiency, and U.S. manufacturing competitiveness. The “Electrochemistry for Manufacturing” workshop series was designed to help AMO understand (1) how electrochemistry can be used within the manufacturing sector to achieve AMO’s goals and (2) the support for technology and workforce development that is needed from AMO to leverage crosscutting efforts that can enable successful outcomes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Needs and Opportunities for Testing of Hydropower Technology Innovations

Despite hydropower’s status as a well-established technology, changes in the global energy sector have prompted a variety of necessary hydropower technological innovations. Examples include efficient lowhead turbines, more flexible and dispatchable hydropower and pumped storage systems to complement variable and intermittent renewable resources, and technologies providing higher environmental performance. However, while innovative technologies are currently being proposed to meet these development challenges, small hydropower facility owners do not have sufficient risk-bearing capacity to adopt new, unvalidated technologies. This discourages manufacturers from bringing nascent technologies to market and stalls the technological growth of the sector. To reduce the risks associated with new technologies and promote further innovation, systemic (and sometimes unconventional) validation activities and new testing capabilities for hydropower are highly desired. These testing capabilities must demonstrate the safety, environmental acceptability, reliability, and performance of innovative technologies to quantify their value compared with existing technologies. Establishing these capabilities through dedicated testing facilities will be key to promoting hydropower growth in the United States. Following direction from the House Energy and Water Development Committee, the US Department of Energy’s Water Power Technologies Office (WPTO) has been tasked with understanding the state of hydropower testing in the United States. This scoping report discusses the needs and opportunities of hydropower testing in the United States, with a specific focus on small hydropower. Future developments will likely mostly target low-head sites with less than 30 ft (9.1 m) from new stream-reach developments, non-powered dam retrofits, and rehabilitation/upgrade of existing plants.

13 HYDRO ENERGY↗
DOE OSTI2021

Perspectives on multi-material additive manufacturing

The last two decades have seen enormous gains in industrial adoption of additive manufacturing (AM) technologies. Its layer-wise approach to fabrication offers designers the opportunity to create structures with unique performance advantages over their traditionally manufactured counterparts, and have created new manufacturing business models and supply chains. While today’s AM technologies have enabled the creation of new geometries, future AM systems that offer simultaneous processing of multiple materials in a single build open opportunities for new product functionality that cannot be achieved by traditional manufacturing methods. Advances in multi-material additive manufacturing, which integrate dissimilar material into a complex, three-dimensional object, is emerging but the advances have been sporadic. Moving beyond homogenous materials, adding multi-materials, gradient, functional and responsive materials, and materials with heterogeneous and graded properties means that a single additive process based on either energy delivery or material deposition alone may not be suitable. Finally, this perspective gives a brief overview of the current status, challenges, and future recommendations for multi-material additive manufacturing. The authors aim to expand the notion of multi-material additive manufacturing beyond combining materials with dissimilar properties, to combinations of materials at different length scales, material classes as well as multiple functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dynamic Beam Shape Sensing and Control in an Open Architecture Metal AM System for Microstructure Manipulation

Most commercially available metal additive manufacturing (AM) systems are closed-architecture, meaning that the system manufacturer limits the ability of the user to directly control the process conditions and can modify the specified inputs using proprietary methods. Unfortunately, this approach severely limits or confounds the ability for users to perform research on fundamental aspects of additive manufacturing. ARCTOS Technology Solutions (ARCTOS) produces an open-architecture laser powder bed fusion (PBF) additive manufacturing system that allows the user to fully control all aspects of the process control and monitoring. The purpose of this project is to help develop beam shaping capabilities and controls within the ARCTOS open-architecture system for control of microstructure evolution during metal AM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Additive Manufacturing of Lightweight Structures: Microfibrillated Cellulose – PLA Biofoams

Extrusion-based polymer additive manufacturing (AM) technology is growing rapidly. The introduction of fiber reinforced feedstock materials and recent developments in the manufacturing systems have promulgated large scale AM of composites to create new industries and applications. Synthetic fibers such as carbon and glass fibers are commonly used to reinforce polymer composites. However, increasing environmental and long-term sustainability concerns are leading to new materials using cellulose fiber reinforcement in bio-derived polymers. These materials offer new property sets, new supply chains and have the potential to provide economical solutions leading to new applications. Large scale AM can be attractive for many different applications because of its ability to freeform manufacture complex geometries; each application may require different material properties. One of the novel application areas for large scale AM is 3D printing of lightweight materials via foaming. Although achieving low density is the key in light weighting via foaming, mechanical performance is also important for many applications. In this study the impact of micro-cellulose fibers (MFC) on foaming behavior and the mechanical properties of additively manufactured parts is investigated. MFC-polylactic acid (PLA) feedstock pellets were prepared at varying MFC content (5, 10, 15 and 20 wt.%) to understand the impact of cellulose fiber content on density and mechanical properties of the AM biocomposites. Also, the impact of extrusion speed and foaming agent content on the AM biocomposites is investigated. Although achieving uniform printed foam structure is challenging with the presence of cellulose fibers, promising results were accomplished with density values below 0.5g/cm3.

Tekinalp, Halil↗
DOE OSTI2022

A Platform Technology for High-throughput Atomically Precise Manufacturing: Mechatronics at the Atomic Scale

The main objective of this project is to invent the necessary enabling technologies for high throughput atomically precise manufacturing (APM). APM is an emerging technology that refers to any manufacturing capability that enables fabrication of atomically precise structures, components, and devices under programmable control. APM will require positional assembly at the atomic and/or molecular scale, as well as at the nano and microscales using hierarchical assembly to create products ranging from nanoscale and quantum devices to macroscale systems and materials. This project builds on the expectation that commercial viability of APM will depend on a high level of parallelism to achieve the required throughput, a capability that currently does not exist. This project is the first attempt to address this key technological bottleneck.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Additively manufactured heat exchangers: a review on opportunities and challenges

Heat Exchangers (HXs) are crucial engineering components for thermal management. The broad range of applications and the current limits of traditional manufacturing techniques has directed designers and researchers to utilize additive manufacturing (AM) technologies to open a new chapter in HXs design and development. AM has created a world of opportunity to redesign HXs in pioneering forms, shapes, and sizes. In other words, AM technologies provides significant opportunities to increase surface area to volume ratio in heat transfer devices. On the other hand, there are certain challenges to overcome in order to fully grasp the benefits of AM technologies. This thorough review study is different from other published review as it intends to highlight the challenges and opportunities in design and manufacturing of HXs. In addition, part of this study is dedicated to investigate the experimental characterization of additively manufactured HXs. Furthermore, the significant details associated with experimental characterization are normally overlooked in review studies.

42 ENGINEERING↗
DOE OSTI2025

Multi-physics melt pool modeling and process optimization for laser direct energy deposition of Nb-based refractory C103: Defect formation, geometric precision, and process mapping

Recent developments in additive manufacturing (AM) technology have reignited interest in the fabrication of the Nb-based refractory C103 alloy offering solutions to the challenges posed by traditional manufacturing methods. However, the limited numerical and experimental studies on laser direct energy deposition (DED) of C103 have hindered the understanding of the relationships between process parameters and build quality. This has made it challenging to consistently produce parts with the desired quality and microstructure suitable for critical applications. In this study, we focus on optimizing the laser DED process for C103 by employing a hybrid approach that combines experimental techniques and computational fluid dynamics (CFD). This approach facilitates the development of process maps for defect detection and geometric precision. To achieve this, multi-layer C103 samples were fabricated using laser DED under various process parameters, enabling the creation of a process map for defect detection. Additionally, a multi-physics, multiphase simulation framework was developed within a high-performance computing (HPC) environment to establish process maps for geometric precision. Using these process maps, printability windows were identified for achieving both the desired geometric accuracy and defect-free prints. It was observed that prints with a power-to-velocity (P/V) ratio close to unity resulted in defect-free outcomes. This study provides a foundation for reducing design lead time and rejected parts, ultimately optimizing the laser DED process for C103.

Defect formation and geometric precision↗