Search NASA⌕ Search

SEARCH · Search NASA

Results for “medium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A Medium Voltage Three-Stage Power Converter Topology for Distribution Grid Scale Energy Storage Systems

This work proposes a three-stage converter topology with a medium frequency isolation transformer for direct integration of energy storage systems into medium voltage distribution grids. The distributed architecture of the topology, using standard AC/DC converters, has been developed with the aim of plug-and-play capability and voltage and power scalability. The medium frequency transformer facilitates improved power density, while its 20:1 voltage translation capability enables the use of limited voltage level (500 Vdc) of the commercially available batteries. This paper presents the topology structure and details how it can be scaled to reach the full range of the distribution grid voltages and the required power levels. A transformer design for 500 Hz rated frequency is discussed. The control scheme of the converter equipped with voltage support, frequency support, and black start capabilities is also presented. Control hardware-in-the-loop results using OPAL-RT, with converter switching models connected to a weak IEEE-4 node test feeder modified for the aforementioned grid services, are provided to show the topology feasibility.

Chinthavali, Madhu Sudhan↗

Anomalously slow relaxation of a nonwetting liquid in the disordered confinement of a nanoporous medium

The time evolution of the water–disordered nanoporous medium Libersorb 23 (L23) system has been studied after complete filling at elevated pressure followed by full release of overpressure. It is established that relaxation of the L23 rapidly flows out during the overpressure relief time, following the variation in pressure. At a temperature below that of the dispersion transition (T < T{sub d} = 284 K), e.g., at T = 277 K, the degree of filling θ decreases from 1 to 0.8 within 10 s. The degree of filling varies with time according to the power law θ ∼ t{sup –α} with the exponent α < 0.1 over a period of t ∼ 10{sup 5} s. This process corresponds to slow relaxation of a metastable state of a nonwetting liquid in a porous medium. At times t > 10{sup 5} s, the metastable state exhibits decay, manifested as the transition to a power dependence of θ(t) with a larger exponent. The relaxation of the metastable state of nonwetting liquid in a disordered porous medium is described in the mean field approximation as a continuous sequence of metastable states with a barrier decreasing upon a decrease in the degree of filling. Using this approach, it is possible to qualitatively explain the observed relaxation process and crossover transition to the stage described by θ(t) with a larger exponent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Subterahertz Longitudinal Phonon Modes Propagating in a Lipid Bilayer Immersed in an Aqueous Medium

The properties of subterahertz longitudinal acoustic phonon modes in the hydrophobic region of a lipid bilayer immersed in a compressible viscous aqueous medium are investigated theoretically. An approximate expression is obtained for the Mandelstam–Brillouin components of the dynamic structure factor of a bilayer. The analysis is based on a generalized hydrodynamic model of the “two-dimensional lipid bilayer + three-dimensional fluid medium” system, as well as on known sharp estimates for the frequencies and lifetimes of long-wavelength longitudinal acoustic phonons in a free hydrated lipid bilayer and in water, obtained from inelastic X-ray scattering experiments and molecular dynamics simulations. It is shown that, for characteristic values of the parameters of the membrane system, subterahertz longitudinal phonon-like excitations in the hydrophobic part of the bilayer are underdamped. In this case, the contribution of the viscous flow of the aqueous medium to the damping of a longitudinal membrane mode is small compared with the contribution of the lipid bilayer. Quantitative estimates of the damping ratio agree well with the experimental results for the vibration mode of the enzyme lysozyme in aqueous solution [1]. It is also shown that a coupling between longitudinal phonon modes of the bilayer and relaxation processes in its fluid environment gives rise to an additional peak in the scattering spectrum, which corresponds to a non-propagating mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interaction of waves with a birefringent medium moving with acceleration

Recent experiments demonstrated that the energy of a neutron traversing an accelerated sample of a refractive medium changes. Later, it was realized that such an accelerated-medium effect (AME) is quite a general phenomenon characteristic of waves and particles of different nature. This paper discusses some special features of the effect for a birefringent medium. In this case, AME shows quite new features. In neutron optics, where birefringence is due to the spin dependence of the refractive index, AME results in a nonstationary state with a precessing spin. In the case of the propagation of a two-flavor neutrino through an accelerated layer of matter, AME affects substantially the ensuing evolution of a neutrino flavor state as it propagates through a free space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New solutions to the Dirac equation for particles in a magnetic field and a medium

We briefly review the application of the method of exact solutions of quantum equations for the description of charged particle motion in external fields. We develop a quantization technique by using the lowering and raising operators to describe the states of fermions moving in a magnetic field and a dense medium. For the first time we have posed and solved the problem of a charged fermion moving in a medium and an external magnetic field by taking into account the anomalous magnetic moment of the particle: we have obtained exact solutions for the wave functions and energy spectrum of the corresponding modified Dirac equation. We discuss a quasi-classic interpretation of the solutions obtained and, in particular, find a correction for the synchrotron radiation intensity dependent on medium density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Composite fermions in medium: Extending the Lipkin model

The role of phase space occupation effects for the formation of twoand three-particle bound states in a dense medium is investigated within an algebraic approach suitable for systems with short-range interactions. It is shown that for two-fermion bound states due to the account of the exchange symmetry (phase space occupation) effect (Pauli blocking) in a dense medium the binding energy is reduced and vanishes at a critical density (Mott effect). For three-fermion bound states, within a Faddeev equation approach, the intermediate formation of pair correlations leads to the representation as a suitably symmetrized fermion-boson bound state. It is shown that the Bose enhancement of fermion pairs can partially compensate the Pauli blocking between the fermions. This leads to the general result obtained by algebraic methods: three-fermion bound states in a medium with high phase space occupation appear necessarily as Borromean states beyond the Mott density of the two-fermion bound state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microhardness of armco iron samples with different initial structures after rolling in a helium or nitrogen medium

We have analyzed the dependences of microhardness H on load P for the surface layers of Armco iron samples with different initial structures, i.e., annealed and after equal-channel angular pressing (ECAP). The microhardness was measured in air after rolling of the sample in helium or nitrogen medium. It has been found that these mediums produce different effects on the H(P) dependences for preliminarily annealed samples compared to those subjected to ECAP. This is due to the differences in their initial defects structures and in the types of binding forces of helium atoms and nitrogen molecules with dislocations, which determine the intensity of their penetration into the surface layer of the samples under investigation. We have obtained curves that describe the release of helium from samples rolled in different mediums and have measured the amount of helium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chlamydomonas cells transition through distinct Fe nutrition stages within 48 h of transfer to Fe-free medium

Low iron (Fe) bioavailability can limit the biosynthesis of Fe-containing proteins, which are especially abundant in photosynthetic organisms, thus negatively affecting global primary productivity. Understanding cellular coping mechanisms under Fe limitation is therefore of great interest. We surveyed the temporal responses of Chlamydomonas (Chlamydomonas reinhardtii) cells transitioning from an Fe-rich to an Fe-free medium to document their short- and long-term adjustments. While slower growth, chlorosis and lower photosynthetic parameters are evident only after one or more days in Fe-free medium, the abundance of some transcripts, such as those for genes encoding transporters and enzymes involved in Fe assimilation, change within minutes, before changes in intracellular Fe content are noticeable, suggestive of a sensitive mechanism for sensing Fe. Promoter reporter constructs indicate a transcriptional component to this immediate primary response. With acetate provided as a source of reduced carbon, transcripts encoding respiratory components are maintained relative to transcripts encoding components of photosynthesis and tetrapyrrole biosynthesis, indicating metabolic prioritization of respiration over photosynthesis. In contrast to the loss of chlorophyll, carotenoid content is maintained under Fe limitation despite a decrease in the transcripts for carotenoid biosynthesis genes, indicating carotenoid stability. These changes occur more slowly, only after the intracellular Fe quota responds, indicating a phased response in Chlamydomonas, involving both primary and secondary responses during acclimation to poor Fe nutrition. Overall design: Sampling of Chlamydomonas CC-4532 cells cultivated photoheterotrophically (TAP) under Fe-starvation condition (0 uM Fe-EDTA). Samples were collected at multiple timepoints from biological duplicate cultures after washing in TAP medium lacking Fe. Two time courses were collected. A short time course with t=0 (pre-wash), 0 (post-wash), 5, 10, 15, 30, 60, 120, and 240 min. A long time course with t= 0, 0.5, 1, 2, 4, 8, 12, 24 and 48 hours. Please note that, for long time course, the GSE44611/PRJNA190650 samples were re-used/re-analyzed together with the short time course data: GSM1087792 C.reinhardtii_Fe_Long_0_hours SRX245324 SAMN01924672 GSM1087793 C.reinhardtii_Fe_Long_0.5_hours SRX245325 SAMN01924673 GSM1087794 C.reinhardtii_Fe_Long_1_hours SRX245326 SAMN01924674 GSM1087795 C.reinhardtii_Fe_Long_2_hours SRX245327 SAMN01924675 GSM1087796 C.reinhardtii_Fe_Long_4_hours SRX245328 SAMN01924676 GSM1087797 C.reinhardtii_Fe_Long_8_hours SRX245329 SAMN01924677 GSM1087798 C.reinhardtii_Fe_Long_12_hours SRX245330 SAMN01924678 GSM1087799 C.reinhardtii_Fe_Long_24_hours SRX245331 SAMN01924679 GSM1087800 C.reinhardtii_Fe_Long_48_hours SRX245332 SAMN01924680

Source record↗

Small- and Medium-Sized Commercial Building Monitoring and Controls Needs: A Scoping Study

Buildings consume over 40% of the total energy consumption in the U.S. A significant portion of the energy consumed in buildings is wasted because of the lack of controls or the inability to use existing building automation systems (BASs) properly. Much of the waste occurs because of our inability to manage and controls buildings efficiently. Over 90% of the buildings are either small-size (<5,000 sf) or medium-size (between 5,000 sf and 50,000 sf); these buildings currently do not use BASs to monitor and control their building systems from a central location. According to Commercial Building Energy Consumption Survey (CBECS), about 10% of the buildings in the U.S. use BASs or central controls to manage their building system operations. Buildings that use BASs are typically large (>100,000 sf). Lawrence Berkeley National Laboratory (LBNL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) were asked by the U.S. Department of Energy’s (DOE’s) Building Technologies Program (BTP) to identify monitoring and control needs for small- and medium-sized commercial buildings and recommend possible solutions. This study documents the needs and solutions for small- and medium-sized buildings.

Katipamula, Srinivas↗

Accessory Hybridization for Medium- and Heavy-Duty Trucks

Manufacturers of medium- and heavy-duty engines and transmissions continually try to improve the efficiency of their components; however, it is becoming more difficult and costly to improve those technologies, and a new approach is needed to find efficiency gains in other vehicle systems. For example, most ancillary loads on the engines in medium- and heavy-duty trucks, both at idle and under driving conditions, are generated by accessories that are designed to address worst-case scenarios or to meet the minimum requirements at one operating point. Improvements to those systems would improve overall powertrain efficiency. The objectives of this cooperative research and development agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and Cummins Inc. (CRADA No. NFE-13-04402) are (1) to analytically verify novel accessory electrification /hybridization approaches for medium- and heavy-duty trucks and (2) to experimentally validate prototype hardware utilizing the ORNL Vehicle Systems Integration Laboratory and the Cummins T112 test vehicle. Hybrid powertrains can provide significant reductions in fuel consumption, criteria pollutants, and greenhouse gas emissions. They provide these benefits by meeting vehicle power requirements in more flexible and optimal ways than a conventional powertrain (e.g., capture and use of braking energy, optimization of engine and component operation). Realizing the full potential of hybridization requires management of all vehicle power demands, including accessory loads. One of the major petroleum-reduction opportunities of hybridization is to shut the engine down when power demand is low. However, accessory loads, such as power steering, braking, climate control, and other electric auxiliaries, must still be managed when the engine is off.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Spectroscopic research of Lambda hypernuclei up to medium-heavy mass region with the (e,e'K + ) reaction

In 2009 (August-November), the E05-115 experiment was carried out at JLab to investigate L hypernuclei in the wide mass region up to A = 52 ($7\atop{Λ}$He, $10\atop{Λ}$Be, $12\atop{Λ}$B and $52\atop{Λ}$V) with the (e,e'K + ) reaction. This is the first attempt to investigate a medium heavy L hypernucleus with the (e,e'K + ) reaction. Experimentally, it is difficult to measure heavier L hypernuclei as background rates of particles which originate from electromagnetic processes are roughly in proportion to Z2 (Z: target proton number) in the (e,e'K + ) experiment. To perform the experiment, many experimental techniques have been developed and introduced such as optimization of the electron spectrometer configuration (tilt method), clean kaon identification, particle tracking under high multiplicity environment, precise energy scale calibration and so on. In the present thesis, experimental results of the elementary process of p(e,e'K + )L, L hypernuclei of $7\atop{Λ}$He, $10\atop{Λ}$Be, $12\atop{Λ}$B and $52\atop{Λ}$V are shown. Elementary processes of the electroproduction of L and Σ 0 , p(e,e'K + )L, Σ 0 were used for the absolute energy scale calibration of our spectrometer systems. A careful Monte Carlo simulation shows that the binding energy can be obtained with a systematic error of 0.11 MeV with our energy scale calibration method. A study of the elementary process of L is important to understand L hypernuclei as it is essential for theoretical calculations of L hypernuclei. The differential cross section of the p(e,e'K + )L reaction at the small K + scattering angle (theta-CM/gamma-K approx. 15.5°), the small Q 2 (approx 0.01 [GeV/c] 2 ) and the total energy of W = 1.92 GeV, where no experimental data exists was obtained to be 235 ± 13$+28\atop{-24}$ nb/sr. The ground state (1/2 + ) binding energy of $7\atop{Λ}$He was already measured in JLab E01-011 (2005). In the present work, the binding energy of 1/2 + state was determined to be B Λ = 5.55 ± 0.10 ±0.11 MeV with five times more statistic and smaller systematic errors than those of the previous experiment. The ground state binding energy is important to test the phe- nomenologically introduced CSB (Charge Symmetry Breaking) LN interaction for A = 7, T = 1 hypernuclear systems. In addition, a peak which is interpreted as 3/2 + and 5/2 + states was measured to be B Λ = 3.65 ± 0.20 ±0.11 MeV with sufficient statistic for the first time. Only three events of the ground state of $10\atop{Λ}$ Be had been observed in the emulsion experiments. The present experiment is the first spectroscopic measurement of 10/L-Be, and the detailed structures have been successfully measured for the first time. About three times better energy resolution was achieved in the present experiment (0.78 MeV in FWHM) than that of the mirror L hy- pernucleus, $10\atop{Λ}$B (2.2 MeV in FWHM) which was measured in the (π + ,K + ) experiment at KEK. The result of the ground state binding energy was obtained to be B Λ = 8.55 ± 0.07 ± 0.11 MeV which serves also to discuss about the CSB effect in the LN interaction. $12\atop{Λ}$B has been measured with the world best energy resolution of 0:5 MeV (FWHM) among the reaction spectroscopy of L hypernuclei. The results of $12\atop{Λ}$B are compared with the experimental results in the previous experiments to confirm the consistency. Furthermore, the obtained ground state binding energies of $12\atop{Λ}$B (B Λ = 11.38 ± 0.02 ± 0.11 MeV) and $52\atop{Λ}$V (B Λ = 21.88 ± 0.59 ± 0.11 MeV) indicate that the reported value of 12/L-C which has been used as a reference of binding energy measurements for the (π + ,K + ) experiments would be shallower by ~ 0.5 MeV. A pilot study for investigation in the medium-heavy mass region with the (e,e'K + ) experiment was performed by measuring $52\atop{Λ}$V. The ground state binding energy of $52\atop{Λ}$V has been measured, overcoming high multiplicity environment. The results are discussed with the ex- perimental results of 51/L-V measured at KEK. The present result is the first measurement of L's binding energy of the ground state without the emulsion reference in the medium-heavy mass region, which could be a substantial improvement in the information needed for understanding the single particle potential of L. In the present experiment, L hypernuclear measurement with a small systematic error of ~ 0.1 MeV by the (e,e'K + ) reaction has been established. Moreover, the present work opened a door to the heavier L hypernuclear measurement with the (e,e'K + ) reaction in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fuel Economy and Cost Estimates for Medium and Heavy Duty Trucks

The U.S. Department of Energy’s (DOE’s) Vehicle Technologies Office (VTO) and Hydrogen and Fuel Cell Technologies Office (HFTO) aim to develop sustainable, affordable and efficient technologies for transportation of goods and people. These offices seek to advance DOE investments in advanced transportation component technologies and powertrains that translate to the estimated potential vehicle-level fuel savings contained herein. As part of quantifying these benefits, we have been asked to take a three-decades-long view of the fuel-saving vehicle technologies that will likely be implemented in medium- and heavy-duty trucks. In this work, we focus on technologies funded by VTO and HFTO that we expect to see during this time frame. Simulation was carried out for more than 20 types of trucks, ranging from Class 2 (the smallest medium-duty trucks, which span from Class 2b–6) to Class 8 (the largest heavy-duty trucks, which span Classes 7 and 8). The output of this study provides the fuel consumption and estimated purchase prices for trucks that employ advanced technologies, where both types of output offer a vehicle-level perspective and estimated projections about the future of advanced-technology medium- and heavy-duty trucks, as well as cost and performance data pairs that can inform other advanced transportation studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Development of High Performance Medium Velocity Superconducting Elliptical Cavities for Hadron Linacs

There is a solid scientific need for continuous wave (CW) proton or heavy ion linear accelerators (linacs) in the energy range up to about 1 GeV per nucleon (GeV/u). Only superconducting (SC) cavities can provide cost-efficient acceleration in CW mode. While low velocity, bc < 0.5 (b is the relative velocity of a charged particle and c is the speed of light), and high velocity, bc > 0.9, SC accelerating structures are established, there is a need in high-performance medium velocity SC accelerating structures. Currently, no superconducting (SC) CW proton or ion accelerators operate in the medium velocity range. We have developed a robust technology for producing high-performance medium-velocity elliptical cavities operating in the frequency range between 600 and 700 MHz. The project was performed in collaboration with Fermi and Argonne National Laboratories. The 5-cell, βopt = 0.65, 644 MHz elliptical cavities built at MSU have been used for this research. An advanced surface treatment method based on nitrogen doping to achieve a high-quality factor and a high accelerating gradient has been demonstrated. The surface treatment has been performed at ANL, and nitrogen doping at FNAL. A stable resonance control with the slow and fast tuner system has also been verified. FNAL developed a dedicated resonance control system for the stable operation of the combined tuner.

43 PARTICLE ACCELERATORS↗

Online Monitoring of Medium Voltage Cable Systems with Spread Spectrum Time Domain and Frequency Domain Reflectometry

In-service failures of wave energy convertor (WEC) cable systems can have a significant cost and power availability impact. Close parallel research 2019 data showed > 1B£ and 9 Terra-Watt-Hours associated with global off-shore wind (OSW) cable failures (Strang-Moran 2020). OSW is a closely related technology but currently is significantly cheaper than WEC technology. For wave energy to compete, the problem of reliable cable transmission must be mitigated. This project develops isolation technology to allow online high frequency reflectometry testing of medium voltage cables (1 to 10 kV and higher) without arcing or damage to the test instrument. Online spread spectrum time domain reflectometry (SSTDR) testing has been established for low voltage cable systems in the aircraft and rail industry and the ability to detect and locate cable flaws of interest is well understood. Extending reflectometry testing to medium voltage systems could enable detection of cable damage before failures occur thereby allowing repair and replacement of damaged cable segments to be scheduled and managed. The seedling project succeeded to pass and receive high frequency SSTDR signals onto a cable up to 1 kV using a parallel trace isolation circuit board that can be connected onto the test cable. The approach used a novel circuit design for which an invention disclosure has been filed. A proposed sapling project would extend the technology toward the higher operating voltages used by WEC systems, thereby enabling online SSTDR cable monitoring. The goal of the seedling project was to extend the capability of the ARENA cable/motor test bed to address medium voltages and to develop a high pass filter isolation architecture to protect the reflectometry instrument from the low frequency (DC – 60 Hz) line voltage while allowing the high frequency diagnostic signal to pass to and from the test instrument to the live line. Initial efforts focused on passive LCR filter circuits to reduce 60 Hz levels below 10 volts from a 10 kV line while allowing the MHz high frequency chirps to pass onto the cables and for mV signals to be detected. We discovered that the parasitic loss behavior of real high voltage components precluded this approach from working. An alternate approach was adapted for the electric field to couple between two parallel traces on a printed circuit board much like a radio-frequency coupler. The challenge here was and is to have the parallel traces close enough to each other to effectively pass the high frequency chirp onto the live line and receive any reflected signal from any encountered impedance change along the cable. This reflected signal will be in the mV range. The traces however must be far enough apart to not allow arcing on the board. A design with 3 mm spacing was determined to allow the high frequency signal to pass onto the live line and receive the mV signal back into the instrument while reducing the 60 Hz voltage amplitude by >80 dB (more than a factor of 10,000) without allowing arcing from across the parallel traces. This was confirmed by simulation and test.

16 TIDAL AND WAVE POWER↗

Deformation Behavior of a Double Soaked Medium Manganese Steel with Varied Martensite Strength

The effects of athermal martensite on yielding behavior and strain partitioning during deformation is explored using in situ neutron diffraction for a 0.14C–7.14Mn medium manganese steel. Utilizing a novel heat treatment, termed double soaking, samples with similar microstructural composition and varied athermal martensite strength and microstructural characteristics, which composed the bulk of the matrix phase, were characterized. It was found that the addition of either as-quenched or tempered athermal martensite led to an improvement in mechanical properties as compared to a ferrite plus austenite medium manganese steel, although the yielding and work hardening behavior were highly dependent upon the martensite characteristics. Specifically, athermal martensite was found to promote continuous yielding and improve the work hardening rate during deformation. The results of this study are particularly relevant when considering the effect of post-processing thermal heat treatments, such as tempering or elevated temperature service environments, on the mechanical properties of medium manganese steels containing athermal martensite.

36 MATERIALS SCIENCE↗

THE FOURSTAR GALAXY EVOLUTION SURVEY (ZFOURGE): ULTRAVIOLET TO FAR-INFRARED CATALOGS, MEDIUM-BANDWIDTH PHOTOMETRIC REDSHIFTS WITH IMPROVED ACCURACY, STELLAR MASSES, AND CONFIRMATION OF QUIESCENT GALAXIES TO z ∼ 3.5

The FourStar galaxy evolution survey (ZFOURGE) is a 45 night legacy program with the FourStar near-infrared camera on Magellan and one of the most sensitive surveys to date. ZFOURGE covers a total of 400 arcmin{sup 2} in cosmic fields CDFS, COSMOS and UDS, overlapping CANDELS. We present photometric catalogs comprising >70,000 galaxies, selected from ultradeep K {sub s} -band detection images (25.5–26.5 AB mag, 5 σ , total), and >80% complete to K {sub s} < 25.3–25.9 AB. We use 5 near-IR medium-bandwidth filters ( J {sub 1}, J {sub 2}, J {sub 3}, H {sub s} , H {sub l} ) as well as broad-band K {sub s} at 1.05–2.16 μ m to 25–26 AB at a seeing of ∼0.″5. Each field has ancillary imaging in 26–40 filters at 0.3–8 μ m. We derive photometric redshifts and stellar population properties. Comparing with spectroscopic redshifts indicates a photometric redshift uncertainty σ {sub z} = 0.010, 0.009, and 0.011 in CDFS, COSMOS, and UDS. As spectroscopic samples are often biased toward bright and blue sources, we also inspect the photometric redshift differences between close pairs of galaxies, finding σ {sub z} {sub ,pairs} = 0.01–0.02 at 1 < z < 2.5. We quantify how σ {sub z} {sub ,pairs} depends on redshift, magnitude, spectral energy distribution type, and the inclusion of FourStar medium bands. σ {sub z} {sub ,pairs} is smallest for bright, blue star-forming samples, while red star-forming galaxies have the worst σ {sub z} {sub ,pairs}. Including FourStar medium bands reduces σ {sub z} {sub ,pairs} by 50% at 1.5 < z < 2.5. We calculate star formation rates (SFRs) based on ultraviolet and ultradeep far-IR Spitzer /MIPS and Herschel /PACS data. We derive rest-frame U − V and V − J colors, and illustrate how these correlate with specific SFR and dust emission to z = 3.5. We confirm the existence of quiescent galaxies at z ∼ 3, demonstrating their SFRs are suppressed by > ×15.

79 ASTRONOMY AND ASTROPHYSICS↗

The Global Magneto-ionic Medium Survey: A Faraday Depth Survey of the Northern Sky Covering 1280–1750 MHz

The Galactic interstellar medium hosts a significant magnetic field, which can be probed through the synchrotron emission produced from its interaction with relativistic electrons. Linearly polarized synchrotron emission is generated throughout the Galaxy and, at longer wavelengths, modified along nearly every path by Faraday rotation in the intervening magneto-ionic medium. Full characterization of the polarized emission requires wideband observations with many frequency channels. We have surveyed polarized radio emission from the Northern sky over the range 1280–1750 MHz, with channel width 236.8 kHz, using the John A. Galt Telescope (diameter 25.6 m) at the Dominion Radio Astrophysical Observatory, as part of the Global Magneto-Ionic Medium Survey. The survey covered 72% of the sky, decl. −30° to +87° at all R.A. The intensity scale was absolutely calibrated, based on the flux density and spectral index of Cygnus A. Polarization angle was calibrated using the extended polarized emission of the Fan Region. Data are presented as brightness temperatures with angular resolution 40′. Sensitivity in Stokes Q and U is 45 mK rms in a 1.18 MHz band. We have applied rotation measure synthesis to the data to obtain a Faraday depth cube of resolution 150 rad m{sup −2} and sensitivity 3 mK rms of polarized intensity. Features in Faraday depth up to a width of 110 rad m{sup −2} are represented. The maximum detectable Faraday depth is ±2 × 10{sup 4} rad m{sup −2}. The survey data are available at the Canadian Astronomy Data Centre.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

HYDRODYNAMICAL INTERACTION OF MILDLY RELATIVISTIC EJECTA WITH AN AMBIENT MEDIUM

The hydrodynamical interaction of spherical ejecta freely expanding at mildly relativistic speeds into an ambient cold medium is studied in semianalytical and numerical ways to investigate how ejecta produced in energetic stellar explosions dissipate their kinetic energy through the interaction with the surrounding medium. We especially focus on the case in which the circumstellar medium (CSM) is well represented by a steady wind at a constant mass-loss rate, having been ejected from the stellar surface prior to the explosion. As a result of the hydrodynamical interaction, the ejecta and CSM are swept by the reverse and forward shocks, leading to the formation of a geometrically thin shell. We present a semianalytical model describing the dynamical evolution of the shell and compare the results with numerical simulations. The shell can give rise to bright emission as it gradually becomes transparent to photons. We develop an emission model for the expected emission from the optically thick shell, in which photons in the shell gradually diffuse out to the interstellar space. Then we investigate the possibility that radiation powered by the hydrodynamical interaction is the origin of an underluminous class of gamma-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗