SEARCH · Search NASA

Results for “model efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Ice-Shelf Flexure and Tidal Forcing of Bindschadler Ice Stream, West Antarctica

Viscoelastic models of ice-shelf flexure and ice-stream velocity perturbations are combined into a single efficient flowline model to study tidal forcing of grounded ice. The magnitude and timing of icestream response to tidally driven changes in hydrostatic pressure and/or basal drag are found to depend significantly on bed rheology, with only a perfectly plastic bed allowing instantaneous velocity response at the grounding line. The model can reasonably reproduce GPS observations near the grounding zone of Bindschadler Ice Stream (formerly Ice Stream D) on semidiurnal time scales; however, other forcings such as tidally driven ice-shelf slope transverse to the flowline and flexurally driven till deformation must also be considered if diurnal motion is to be matched

Ice-shelf↗

NASA NTRS1991

Comparison of a quasi-3D analysis and experimental performance for three compact radial turbines

An experimental aerodynamic evaluation of three compact radial turbine builds was performed. Two rotors which were 40 to 50 percent shorter in axial length than conventional state of the art radial rotors were tested. A single nozzle design was used. One rotor was tested with the nozzle at two stagger angle settings. A second rotor was tested with the nozzle in only the closed down setting. Experimental results were compared to predict results from a quasi-3D inviscid and boundary layer analysis, called Meridl/Tsonic/Blayer (MTSB). This analysis was used to predict turbine performance. It has previously been calibrated only for axial, not radial, turbomachinery. The predicted and measured efficiencies were compared at the design point for the three turbines. At the design points the analysis overpredicted the efficiency by less than 1.7 points. Comparisons were also made at off-design operating points. The results of these comparisons showed the importance of an accurate clearance model for efficiency predictions and also that there are deficiencies in the incidence loss model used.

Simonyi, P. S.↗

NASA NTRS1991

Comparison of a quasi-3D analysis and experimental performance for three compact radial turbines

An experimental aerodynamic evaluation of three compact radial turbine builds was performed. Two rotors which were 40-50 percent shorter in axial length than conventional state-of-the-art radial rotors were tested. A single nozzle design was used. One rotor was tested with the nozzle at two stagger angle settings. A second rotor was tested with the nozzle in only the closed down setting. Experimental results were compared to predicted results from a quasi-3D inviscid and boundary layer analysis, called MTSB (Meridl/Tsonic/Blayer). This analysis was used to predict turbine performance. It has previously been calibrated only for axial, not radial, turbomachinery. The predicted and measured efficiencies were compared at the design point for the three turbines. At the design points the analysis overpredicted the efficiency by less than 1.7 points. Comparisons were also made at off-design operating points. The results of these comparisons showed the importance of an accurate clearance model for efficiency predictions and also that there are deficiencies in the incidence loss model used.

Simonyi, P. S.↗

NASA NTRS1982

Energy efficient engine: Turbine transition duct model technology report

The Low-Pressure Turbine Transition Duct Model Technology Program was directed toward substantiating the aerodynamic definition of a turbine transition duct for the Energy Efficient Engine. This effort was successful in demonstrating an aerodynamically viable compact duct geometry and the performance benefits associated with a low camber low-pressure turbine inlet guide vane. The transition duct design for the flight propulsion system was tested and the pressure loss goal of 0.7 percent was verified. Also, strut fairing pressure distributions, as well as wall pressure coefficients, were in close agreement with analytical predictions. Duct modifications for the integrated core/low spool were also evaluated. The total pressure loss was 1.59 percent. Although the increase in exit area in this design produced higher wall loadings, reflecting a more aggressive aerodynamic design, pressure profiles showed no evidence of flow separation. Overall, the results acquired have provided pertinent design and diagnostic information for the design of a turbine transition duct for both the flight propulsion system and the integrated core/low spool.

Leach, K.↗

NASA NTRS2011

Ethane in Planetary and Cometary Atmospheres: Transmittance and Fluorescence Models of the nu7 Band at 3.3 Micrometers

Ethane and other hydrocarbon gases have strong rovibrational transitions in the 3.3 micron spectral region owing to C-H, CH2, and CH3 vibrational modes, making this spectral region prime for searching possible biomarker gases in extraterrestrial atmospheres (e.g., Mars, exoplanets) and organic molecules in comets. However, removing ethane spectral signatures from high-resolution terrestrial transmittance spectra has been imperfect because existing quantum mechanical models have been unable to reproduce the observed spectra with sufficient accuracy. To redress this problem, we constructed a line-by-line model for the n7 band of ethane (C2H6) and applied it to compute telluric transmittances and cometary fluorescence efficiencies. Our model considers accurate spectral parameters, vibration-rotation interactions, and a functional characterization of the torsional hot band. We integrated the new band model into an advanced radiative transfer code for synthesizing the terrestrial atmosphere (LBLRTM), achieving excellent agreement with transmittance data recorded against Mars using three different instruments located in the Northern and Southern hemispheres. The retrieved ethane abundances demonstrate the strong hemispheric asymmetry noted in prior surveys of volatile hydrocarbons. We also retrieved sensitive limits for the abundance of ethane on Mars. The most critical validation of the model was obtained by comparing simulations of C2H6 fluorescent emission with spectra of three hydrocarbon-rich comets: C/2004 Q2 (Machholz), 8P/Tuttle, and C/2007 W1 (Boattini). The new model accurately describes the complex emission morphology of the nu7 band at low rotational temperatures and greatly increases the confidence of the retrieved production rates (and rotational temperatures) with respect to previously available fluorescence models.

Villanueva, G. L.↗

NASA NTRS1989

On finite element implementation and computational techniques for constitutive modeling of high temperature composites

The research work performed during the past year on finite element implementation and computational techniques pertaining to high temperature composites is outlined. In the present research, two main issues are addressed: efficient geometric modeling of composite structures and expedient numerical integration techniques dealing with constitutive rate equations. In the first issue, mixed finite elements for modeling laminated plates and shells were examined in terms of numerical accuracy, locking property and computational efficiency. Element applications include (currently available) linearly elastic analysis and future extension to material nonlinearity for damage predictions and large deformations. On the material level, various integration methods to integrate nonlinear constitutive rate equations for finite element implementation were studied. These include explicit, implicit and automatic subincrementing schemes. In all cases, examples are included to illustrate the numerical characteristics of various methods that were considered.

Saleeb, A. F.↗

DOE OSTI2024

Stability optimization of energetic particle driven modes in nuclear fusion devices: the FAR3d gyro-fluid code

The development of reduced models provide efficient methods that can be used to perform short term experimental data analysis or narrow down the parametric range of more sophisticated numerical approaches. Reduced models are derived by simplifying the physics description with the goal of retaining only the essential ingredients required to reproduce the phenomena under study. This is the role of the gyro-fluid code FAR3d, dedicated to analyze the linear and nonlinear stability of Alfvén Eigenmodes (AE), Energetic Particle Modes (EPM) and magnetic-hydrodynamic modes as pressure gradient driven mode (PGDM) and current driven modes (CDM) in nuclear fusion devices. Such analysis is valuable for improving the plasma heating efficiency and confinement; this can enhance the overall device performance. The present review is dedicated to a description of the most important contributions of the FAR3d code in the field of energetic particles (EP) and AE/EPM stability. FAR3d is used to model and characterize the AE/EPM activity measured in fusion devices as LHD, JET, DIII-D, EAST, TJ-II and Heliotron J. In addition, the computational efficiency of FAR3d facilitates performing massive parametric studies leading to the identification of optimization trends with respect to the AE/EPM stability. This can aid in identifying operational regimes where AE/EPM activity is avoided or minimized. This technique is applied to the analysis of optimized configurations with respect to the thermal plasma parameters, magnetic field configuration, external actuators and the effect of multiple EP populations. In addition, the AE/EPM saturation phase is analyzed, taking into account both steady-state phases and bursting activity observed in LHD and DIII-D devices. The nonlinear calculations provide: the induced EP transport, the generation of zonal structures as well as the energy transfer towards the thermal plasma and between different toroidal/helical families. Finally, FAR3d is used to forecast the AE/EPM stability in operational scenarios of future devices as ITER, CFETR, JT60SA and CFQS as well as possible approaches to optimization with respect to variations in the most important plasma parameters.

Alfv én Eigenmodes↗

DOE OSTI2025

Designing a quantum-accurate machine-learning potential to enable large-scale simulations of deuterium under shock

Large-scale molecular dynamics of deuterium under shock can elucidate kinetic processes vital to the target design in inertial confinement fusion and high-energy-density experiments. However, modeling the complex evolution of this material from an insulating molecular state at ambient pressure to an ionized, atomic fluid under strong shock is beyond the capability of simple pair and even bond order potentials. We thus train a quantum-accurate and broadly transferable machine-learning interatomic potential for deuterium using the Chebyshev Interaction Model for Efficient Simulations framework. We show that due to an improved description of the molecular-to-atomic transition, our model is able to better reproduce the ab initio equation of state, radial distribution functions, and principal Hugoniot than bond order potentials. This represents an important step toward large-scale quantum-accurate and nonequilibrium simulations of complicated systems under dynamic changes including phase transitions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2001

General Multimechanism Reversible-Irreversible Time-Dependent Constitutive Deformation Model Being Developed

Since most advanced material systems (for example metallic-, polymer-, and ceramic-based systems) being currently researched and evaluated are for high-temperature airframe and propulsion system applications, the required constitutive models must account for both reversible and irreversible time-dependent deformations. Furthermore, since an integral part of continuum-based computational methodologies (be they microscale- or macroscale-based) is an accurate and computationally efficient constitutive model to describe the deformation behavior of the materials of interest, extensive research efforts have been made over the years on the phenomenological representations of constitutive material behavior in the inelastic analysis of structures. From a more recent and comprehensive perspective, the NASA Glenn Research Center in conjunction with the University of Akron has emphasized concurrently addressing three important and related areas: that is, 1) Mathematical formulation; 2) Algorithmic developments for updating (integrating) the external (e.g., stress) and internal state variables; 3) Parameter estimation for characterizing the model. This concurrent perspective to constitutive modeling has enabled the overcoming of the two major obstacles to fully utilizing these sophisticated time-dependent (hereditary) constitutive models in practical engineering analysis. These obstacles are: 1) Lack of efficient and robust integration algorithms; 2) Difficulties associated with characterizing the large number of required material parameters, particularly when many of these parameters lack obvious or direct physical interpretations.

Saleeb, A. F.↗

NASA NTRS1986

Fluidized-bed reactor modeling for production of silicon by silane pyrolysis

An ideal backmixed reactor model (CSTR) and a fluidized bed bubbling reactor model (FBBR) were developed for silane pyrolysis. Silane decomposition is assumed to occur via two pathways: homogeneous decomposition and heterogeneous chemical vapor deposition (CVD). Both models account for homogeneous and heterogeneous silane decomposition, homogeneous nucleation, coagulation and growth by diffusion of fines, scavenging of fines by large particles, elutriation of fines and CVD growth of large seed particles. At present the models do not account for attrition. The preliminary comparison of the model predictions with experimental results shows reasonable agreement. The CSTR model with no adjustable parameter yields a lower bound on fines formed and upper estimate on production rates. The FBBR model overpredicts the formation of fines but could be matched to experimental data by adjusting the unkown jet emulsion exchange efficients. The models clearly indicate that in order to suppress the formation of fines (smoke) good gas-solid contacting in the grid region must be achieved and the formation of the bubbles suppressed.

Dudukovic, M. P.↗

DOE OSTI2024

Statistical Downscaling of Climate Models for Solar Resource Assessment

This study presents the development of statistical models to efficiently downscale future projections of solar irradiance for solar energy applications. A climate data set simulated from a Regional Climate Model (RCM) obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) is selected as input to the statistical models to create high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). Our approach builds statistical downscaling models that (1) regrid RCM data (0.22 degree and daily spatiotemporal resolution), (2) correct bias of GHI projections, (3) downscale the future GHI project from daily-scale to hourly-scale, and (4) spatially downscale to generate GHI at 8-km resolution. To calibrate and validate the statistical models, we adapt and use the National Solar Radiation Database (NSRDB). Preliminary results show that the statistical downscaling approach downscales future projections of GHI under two climate scenarios (RCP4.5 and RCP8.5) with a nBIAS of 3%, nMAE of 34% and nRMSE of 46% estimated against NSRDB for the contiguous United State. This presentation will summarize the implemented methodology and validation results as well as future extension of this research.

climate data↗

NASA NTRS1986

Development of high-efficiency solar cells on silicon web

Work is reported aimed at identifying and reducing sources of carrier recombination both in the starting web silicon material and in the processed cells. Cross-sectional transmission electron microscopy measurements of several web cells were made and analyzed. The effect of the heavily twinned region on cell efficiency was modeled, and the modeling results compared to measured values for processed cells. The effects of low energy, high dose hydrogen ion implantation on cell efficiency and diffusion length were examined. Cells were fabricated from web silicon known to have a high diffusion length, with a new double layer antireflection coating being applied to these cells. A new contact system, to be used with oxide passivated cells and which greatly reduces the area of contact between metal and silicon, was designed. The application of DLTS measurements to beveled samples was further investigated.

Meier, D. L.↗

NASA NTRS1990

Model checking for linear temporal logic: An efficient implementation

This report provides evidence to support the claim that model checking for linear temporal logic (LTL) is practically efficient. Two implementations of a linear temporal logic model checker is described. One is based on transforming the model checking problem into a satisfiability problem; the other checks an LTL formula for a finite model by computing the cross-product of the finite state transition graph of the program with a structure containing all possible models for the property. An experiment was done with a set of mutual exclusion algorithms and tested safety and liveness under fairness for these algorithms.

Sherman, Rivi↗

NASA NTRS1992

Neural network based decomposition in optimal structural synthesis

The present paper describes potential applications of neural networks in the multilevel decomposition based optimal design of structural systems. The generic structural optimization problem of interest, if handled as a single problem, results in a large dimensionality problem. Decomposition strategies allow for this problem to be represented by a set of smaller, decoupled problems, for which solutions may either be obtained with greater ease or may be obtained in parallel. Neural network models derived through supervised training, are used in two distinct modes in this work. The first uses neural networks to make available efficient analysis models for use in repetitive function evaluations as required by the optimization algorithm. In the second mode, neural networks are used to represent the coupling that exists between the decomposed subproblems. The approach is illustrated by application to the multilevel decomposition-based synthesis of representative truss and frame structures.

Hajela, P.↗

NASA NTRSDate not supplied

Improving Regional Air Quality Forecasting Through Chemical Data Assimilation and Dynamic Emissions Adjustment

Poor air quality (AQ) is one of the most important human-health and environmental problems facing the United States (US). In addition to the detrimental impacts on human- and environmental-health, poor AQ has an economic cost of ~5% of the US gross domestic product (~$790 billion). AQ managers use AQ analyses and modeling to better understand, anticipate, and avoid poor AQ events. Our research focuses on improving AQ analysis/forecast skill, predictability, and emission estimates through improved and more efficient: (i) modeling and data assimilation strategies; (ii) dynamic emissions adjustment strategies; and (iii) use of satellite remote-sensing Earth observations (e.g., MOPITT, IASI, MODIS, OMI, TROPOMI, TEMPO, etc.). This seminar will review: (i) regional chemical weather forecasting/data assimilation with dynamic emissions adjustment with WRF-Chem/DART; (ii) strategies for efficiently assimilating satellite retrieval profiles with ‘compact phase space retrievals’ (CPSRs); (iii) results from joint assimilation of multiple satellite retrievals at medium (12 km × 12 km) and high (4 km × 4 km) spatial resolutions; and (iv) results from observing system simulation experiments (OSSEs) to investigate whether we can recover COVID-period anthropogenic emissions by assimilating synthetic TEMPO NO2 tropospheric column retrievals with dynamic emissions adjustment. Biographical Sketch: Dr. Mizzi is a Senior Research Fellow working and Dr. Johnson at the NASA Ames Research Center. He holds BA and MS degrees in Environmental Science from the University of Virginia, MS and PhD degrees in Applied Mathematics from the University of Colorado at Boulder (CUB), and a JD degree (with an emphasis in Environmental Law) from the University of Colorado School of Law. He worked at the National Center for Atmospheric Research for nearly 25 years on global atmospheric modeling, dynamic and physical initialization, regional hybrid data assimilation, and most recently on regional chemical data assimilation. He also worked as an environmental attorney and consultant for nearly 15 years. He is an expert in numerical modeling and is recognized internationally as a leading expert in regional, chemical data assimilation with dynamic emissions adjustment. Dr. Mizzi became affiliated with NASA Ames in March 2020 to work on improving AQ analysis/forecast skill, predictability, and ‘top-down’ emissions adjustment though the assimilation of Earth observations. An emphasis of his current work is developing methods for assimilating synthetic TEMPO retrievals to quantify the expected benefits of TEMPO relative to existing AQ observations.

Arthur P. Mizzi↗

NASA NTRS2008

Thermal Model Development for Ares I-X

Thermal analysis for the Ares I-X vehicle has involved extensive thermal model integration, since thermal models of vehicle elements came from several different NASA and industry organizations. Many valuable lessons were learned in terms of model integration and validation. Modeling practices such as submodel, analysis group and symbol naming were standardized to facilitate the later model integration. Upfront coordination of coordinate systems, timelines, units, symbols and case scenarios was very helpful in minimizing integration rework. A process for model integration was developed that included pre-integration runs and basic checks of both models, and a step-by-step process to efficiently integrate one model into another. Extensive use of model logic was used to create scenarios and timelines for avionics and air flow activation. Efficient methods of model restart between case scenarios were developed. Standardization of software version and even compiler version between organizations was found to be essential. An automated method for applying aeroheating to the full integrated vehicle model, including submodels developed by other organizations, was developed.

Amundsen, Ruth M.↗

DOE OSTI2025

Operational optimization for multi-functional charging station with electric and hydrogen-powered vehicles

The rapid adoption of electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs), combined with global efforts to reduce carbon emissions, has accelerated the development of EV charging and hydrogen refueling stations. In response to this demand, this paper introduces the concept of Multi-Functional Charging Station (MFCS) that integrates power generation, EV charging, battery swapping, and hydrogen refueling. A comprehensive operational model is developed for the MFCS that couples electricity and hydrogen conversion and storage technologies to enhance infrastructure utilization and improve overall system efficiency. The model also considers multiple revenue streams, including participation in energy and ancillary markets. To validate the effectiveness of the proposed model and evaluate its performance, a series of numerical experiments are conducted with different charger numbers, different electricity purchase limits, and different charger allocations. Numerical results demonstrate that shared charger configurations can lead to 8.11 % improvement in operational profit by improving resource utilization and reducing the number of depleted batteries at the end of operations compared to allocated charger setups. By varying the number of chargers, sensitivity analysis identifies diminishing marginal returns beyond about 45 chargers, suggesting it as an optimal sizing point under current settings. The integration of electricity and hydrogen conversion is also explored under scenarios with limited external electricity purchases. In conclusion, these findings indicate that optimizing charger allocation and energy management can significantly enhance station productivity and profitability, ultimately supporting the broader adoption of electrified and hydrogen-based transportation solutions.

Charging station↗

NASA NTRS2019

Model for the Increase in Thruster Efficiency from Cross-Channel Coupling in Nested Hall Thrusters

Multi-channel operation in nested Hall thrusters has been experimentally shown to enhance thruster efficiency compared to single-channel operation at constant power. This is the result of higher local neutral density due to the flow from adjacent channels, leading to two effects: neutral ingestion and decreased plume divergence. Analytical expressions for the impact of these cross-channel effects on efficiency are derived for a nested Hall thruster based on the flow of neutrals between channels. These expressions are dependent on the geometry and operation of a given thruster, as well as its performance in single-channel operation. The mass utilization efficiency increase from cross-channel neutrals is found to be primarily driven by the distance between adjacent channels. A comparison of the model predictions of efficiency to experiment also shows agreement within uncertainty. These results are discussed in the context of best practices for nested Hall thruster channel testing and optimal thruster design.

Nested Hall Thruster↗