Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Characterization of an Optically Accessible RP/GOx Rotating Detonation Engine

The accurate characterization of the dynamic response of liquid jets to transient detonation wave passage is crucial for optimizing and modeling liquid-fueled rotating detonation combustors. To address this need, we have developed an optically accessible rocket RDE (RP-RDE), which utilizes liquid RP-1 and gaseous oxygen as propellants and operates at elevated pressures. The experimental setup features optical access from the oxidizer injection plenum to the combustor exit, allowing for detailed characterization of injection, mixing, and combustion processes and their impact on the detonation wave structure. To design and develop the liquid injection scheme for the RP-RDE test article, we employed a combined experimental and numerical approach that included cold-flow simulations. Our aim was to optimize the liquid injection process and ensure that the resulting fuel-oxidizer mixture is homogeneous and stable. To this end, high-speed optical imaging will be employed to provide qualitative visualization of the liquid and gaseous phases of the propellant as well as the local heat release during detonation wave propagation through the non-premixed medium. This work will provide critical insights into the behavior of the transient detonation waves in more relevant rocket conditions, which is essential for the optimization and modeling of rotating detonation combustors.

Propulsion↗

Iodine Doping of CdTe and CdMgTe for Photovoltaic Applications

Here, iodine-doped CdTe and Cd 1-x Mg x Te layers were grown by molecular beam epitaxy. Secondary ion mass spectrometry characterization was used to measure dopant concentration, while Hall measurement was used for determining carrier concentration. Photoluminescence intensity and time-resolved photoluminescence techniques were used for optical characterization. Maximum n-type carrier concentrations of 7.4 x 10 18 cm -3 for CdTe and 3 x 10 17 cm -3 for Cd 0.65 Mg 0.35 Te were achieved. Studies suggest that electrically active doping with iodine is limited with dopant concentration much above these values. Dopant activation of about 80% was observed in most of the CdTe samples. The estimated activation energy is about 6 meV for CdTe and the value for Cd 0.65 Mg 0.35 Te is about 58 meV. Iodine-doped samples exhibit long lifetimes with no evidence of photoluminescence degradation with doping as high as 2 x 10 18 cm -3 , while indium shows substantial non-radiative recombination at carrier concentrations above 5 x 10 16 cm -3 . Iodine was shown to be thermally stable in CdTe at temperatures up to 600 °C. Results suggest iodine may be a preferred n-type dopant compared to indium in achieving heavily doped n-type CdTe.

14 SOLAR ENERGY↗

High-Dynamic-Range Single-Shot Cross-Correlator Based on an Optical Pulse Replicator

The operation of a single-shot cross-correlator based on a pulse replicator is described. The correlator uses a discrete sequence of sampling pulses that are nonlinearly mixed with the pulse under test. The combination of a high reflector and partial reflector replicates an optical pulse by multiple internal reflections and generates a sequence of spatially displaced and temporally delayed sampling pulses. This principle is used in a cross-correlator characterizing optical pulses at 1053 nm. A dynamic range higher than 60 dB is obtained over a temporal range larger than 200 ps.

ultrafast measurements↗

JWST Integrated Science Instrument Module Alignment Optimization Tool

During cryogenic vacuum testing of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM), the global alignment of the ISIM with respect to the designed interface of the JWST optical telescope element (OTE) will be measured through a series of optical characterization tests. These tests will determine the locations and orientations of the JWST science instrument projected focal surfaces and entrance pupils with respect to their corresponding OTE optical interfaces. If any optical performance non-compliances are identified, the ISIM will be adjusted to improve its performance. In order to understand how to manipulate the ISIM's degrees of freedom properly and to prepare for the ISIM flight model testing, a series of optical-mechanical analyses have been completed to develop and identify the best approaches for bringing a non-compliant ISIM element into compliance. In order for JWST to meet its observatory-level optical requirements and ambitious science goals, the ISIM element has to meet approximately 150 separate optical requirements. Successfully achieving many of those optical requirements depends on the proper alignment of the ISIM element with respect to the OTE. To verify that the ISIM element will meet its optical requirements, a series of cryogenic vacuum tests will be conducted with an OTE Simulator (OSIM). An optical Ray Trace and Geometry Model tool was developed to help solve the multi-dimensional alignment problem. The tool allows the user to determine how best to adjust the alignment of the JWST ISIM with respect to the ideal telescope interfaces so that the approximately 150 ISIM optical performance requirements can be satisfied. This capability has not existed previously.

Bos, Brent↗

Subsurface spectroscopy of heterogeneous materials using optical wavefront shaping

Plastic-bonded explosives and propellants consist of energetic molecular crystals embedded in a polymer matrix that also includes additives, such as taggants, plasticizers, grit, antioxidants, etc. Furthermore, this heterogeneous composition renders these materials optically opaque, limiting optical characterization techniques (e.g., Raman spectroscopy) to probing chemical reactions at the sur-face. However, many reactions of interest are believed to occur inside the material where current optical techniques can not probe. To address this challenge, we have developed a new optical technique that utilizes feedback assisted wavefront shaping (using spatial light modulators) to focus probe light inside a heterogeneous material, such that we can perform subsurface spectroscopy. Recently, we demonstrated this technique by monitoring subsurface photodegradation and thermal degradation of Eu-doped molecular crystals using both fluorescence and Raman spectroscopy. Based off these successes we are now looking into improvements to this technique to allow for greater time resolution, including replacing our spatial light modulators with fast digital mirror devices, using ns optical phase conjugation, and self-healing optical beams.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Is it possible to check microcomponent coatings?

Optical microcomponents are increasingly used in laser optical systems because of their many and novel industrial applications. These components are coated in order to enhance their optical performance, but optical characterizations are very difficult due to the shapes and small size. Thus, to perform this kind of measurement, special devices are needed. It is difficult to check component optical responses after manufacturing. Thus a new method, developed by the French Atomic Energy and Alternative Energies Commission, is proposed to fill this gap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of nanocrystalline Cu{sub 2}ZnSnS{sub 4} thin films grown by the spray-pyrolysis technique

Spray pyrolysis was used to deposit Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films on soda lime glass substrates at 300 °C. Aqueous solutions of copper chloride, zinc chloride, stannous chloride and thiourea were mixed together to form the spray liquid. The sprayed films were annealed under vacuum at 350 °C, 400 °C and 450 °C. Structural and optical characterization was performed on the CZTS films using X-ray diffraction (XRD) and UV-VIS spectrophotometry. XRD results indicate that the films are single phase nanocrystalline CZTS. Optical studies show that the optical gap values are 1.44 eV for the as-grown film and 1.46 eV, 1.48 eV and 1.49 eV for the films annealed at 350 °C, 400 °C and 450 °C, respectively.

36 MATERIALS SCIENCE↗

Development of CCD imaging sensors for space applications, phase 1

The results of an experimental investigation to develop a large area charge coupled device (CCD) imager for space photography applications are described. Details of the design and processing required to achieve 400 X 400 imagers are presented together with a discussion of the optical characterization techniques developed for this program. A discussion of several aspects of large CCD performance is given with detailed test reports. The areas covered include dark current, uniformity of optical response, square wave amplitude response, spectral responsivity and dynamic range.

Antcliffe, G. A.↗

Cascaded emission of linearly polarized single photons from positioned InP/GaInP quantum dots

We report on the optical characterization of site-controlled InP/GaInP quantum dots (QDs). Spatially resolved low temperature cathodoluminescence proves the long-range ordering of the buried emitters, revealing a yield of ∼90% of optically active, positioned QDs and a strong suppression of emitters on interstitial positions. The emission of single QDs shows a pronounced degree of linear polarization along the [0,−1,1] crystal axis with an average degree of polarization of 94%. Photon correlation measurements of the emission from a single QD indicate the single-photon character of the exciton and biexciton emission lines as well as the cascaded nature of the photon pair.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Rate Laser Pitting Technique for Solar Cell Texturing

Efficiency of crystalline silicon solar cells can be improved by creating a texture on the surface to increase optical absorption. Different techniques have been developed for texturing, with the current state-of-the-art (SOA) being wet chemical etching. The process has poor optical performance, produces surfaces that are difficult to passivate or contact and is relatively expensive due to the use of hazardous chemicals. This project shall develop an alternative process for texturing mc-Si using laser micromachining. It will have the following features compared to the current SOA texturing process: (1) Superior optical surfaces for reduced front-surface reflection and enhanced optical absorption in thin mc-Si substrates (2) Improved surface passivation (3) More easily integrated into advanced back-contact cell concepts (4) Reduced use of hazardous chemicals and waste treatment (5) Similar or lower cost. The process is based on laser pitting. The objective is to develop and demonstrate a high rate laser pitting process which will exceed the rate of former laser texturing processes by a factor of ten. The laser and scanning technologies will be demonstrated on a laboratory scale, but will use inherently technologies that can easily be scaled to production rates. The drastic increase in process velocity is required for the process to be implemented as an in-line process in PV manufacturing. The project includes laser process development, development of advanced optical systems for beam manipulation and cell reflectivity and efficiency testing. An improvement of over 0.5% absolute in efficiency is anticipated after laser-based texturing. The surface textures will be characterized optically, and solar cells will be fabricated with the new laser texturing to ensure that the new process is compatible with high-efficiency cell processing. The result will be demonstration of a prototype process that is suitable for scale-up to a production tool and process. The developed technique will have an reducing impact on product pricing. As efficiency has a substantial impact on the economics of solar cell production due to the high material cost content; in essence, improved efficiency through cost-effective texturing reduces the material cost component since the product is priced in terms of $/W. The project is a collaboration between Fraunhofer USA, Inc. and a c-Si PV manufacturer.

14 SOLAR ENERGY↗

COLLABORATIVE RESEARCH: Study of Aerosol Sources and Processing at the GVAX Pantnagar Supersite

This project funded the participation of scientists from seven research groups, running more than thirty instruments, in the Winter Intensive Operating Period (January-February 2012) of the Clean Air for London (ClearfLo) campaign at a rural site in Detling, UK, 45 km southeast of central London. The primary science questions for the ClearfLo Winter IOP were, 1) what is the urban increment of particulate matter (PM) and other pollutants in the greater London area, and, 2) what is the contribution of solid fuel use for home heating to wintertime PM? An additional motivation for the Detling measurements was the question of whether coatings on black carbon particles enhance absorption. The following four key accomplishments have been identified so far: 1) Chemical, physical and optical characterization of PM from local and regional sources (Figures 2, 4, 5 and 6). 2) Measurement of urban increment in particulate matter and gases in London (Figure 3). 3) Measurement of optical properties and chemical composition of coatings on black carbon containing particles indicates absorption enhancement. 4) First deployment of chemical ionization instrument (MOVI-CI-TOFMS) to measure both particle-phase and gas-phase organic acids. (See final report from Joel Thornton, University of Washington, for details.) Analysis of the large dataset acquired in Detling is ongoing and will yield further key accomplishments. These measurements of urban and rural aerosol properties will contribute to improved modeling of regional aerosol emissions, and of atmospheric aging and removal. The measurement of absorption enhancement by coatings on black carbon will contribute to improved modeling of the direct radiative properties of PM.

54 ENVIRONMENTAL SCIENCES↗

Growth, characterization, and properties of metastable and modulated semiconductor structures - Prospects for future studies

The general field of preparation and study of metastable and modulated semiconductor structures has progressed rapidly in recent years. This short overview offers an assessment of the progress and current understanding in the areas of fabrication, characterization, and utilization of these new material systems. The discussion includes the more prominent growth techniques, theoretical and experimental analysis of growth kinetics, and an overview of structural, chemical, electronic, and optical characterization. The probable application of these structures for the technological development of new device structures and concepts is considered. The discussion particularly emphasizes the prospects for future studies in view of the specific current understanding.

Grunthaner, F. J.↗

SPRUCE Advanced Molecular Techniques Provide a Rigorous Method for Characterizing Organic Matter Quality in Complex Systems: Supporting Data

This dataset contains Fourier transform ion cyclotron resonance mass spectrometry-based measurements (FTICRMS), gas chromatography, and liquid chromatography data from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA from 2011 to 2016. Measurement results demonstrate that optical characterization of peatland dissolved organic matter (DOM) may not fully capture classically identified chemical characteristics and may, therefore, not be the best measure of organic matter quality. Analyses show poor regression fits between optical characteristics and Fourier transform ion cyclotron resonance mass spectrometry-based measurements (FTICRMS). These data were used in Wilson and Tfaily (2018) and files are organized by which figure they were used to produce. Data underlying those regression analyses, as shown in Figures 1a and 1b of Wilson and Tfaily (2018), are provided in data files ds01 and ds02, respectively. ds01: Optically-derived specific ultraviolet absorbance method at 254 nm (SUVA254) values and Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) -derived double bond equivalences. ds02: Optically-derived spectral slopes and FTICRMS-derived average molecular weights. Results of analyses of a representative sample by FTICRMS and additional analytical techniques provide a broader picture of the compounds occurring in peatland dissolved organic matter (DOM) as shown in Figure 2 of Wilson and Tfaily (2018). The data underlying Figure 2 in are provided in data files ds03-ds07, organized by the respective analytical technique used to generate the data. ds03: Nitrogen containing compounds identified via FTICRMS. ds04: Compounds identified via FTICRMS which did not have nitrogen. ds05: Nuclear magnetic resonance (NMR) results. ds06: Gas chromatography mass spectrometry (GCMS) results. ds07: Liquid chromatography mass spectrometry (LCMS) results. This dataset contains seven data files in comma-separate values (*.csv) format. Additional metadata are provided: seven data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

The SIRTF Telescope Test Facility: The First Year

The SIRTF Telescope Test Facility (STTF) consists of an optical dewar for testing mirrors of up to 1m diameter and f less than 6 at temperatures from 300K to 5K and a phase shift interferometer for optical characterization. The STTF was brought on line in early 1995.

Cryogenic↗

Advanced light trapping scheme in decoupled front and rear textured thin-film silicon solar cells

In this paper we present the study of an advanced light trapping scheme applied to thin-film silicon-based solar cells, overcoming the broadband Green absorption limit, that is the generalized case of the 4n 2 classical absorption limit for all wavelengths. This result is achieved by the 3-dimensional optical modelling of a fully functional thin-film hydrogenated nano-crystalline silicon (nc-Si:H) solar cell endowed with decoupled front and back textures. Our results stem from rigorously characterized optical properties of state-of-the-art materials, optimized geometric nano-features on the front and rear surfaces of the solar cell, and thickness optimization of the front transparent oxide. The simulated improvements derive from a gain in light absorption, especially in the near-infrared part of the spectrum close to the band gap of nc-Si:H. In this wavelength region, the material is weakly absorbing, whereas we now find significant absorptance peaks that can only be explained by the concurrent excitation of guided resonances by front and rear textures. This insight indicates the need to modify the temporal coupled-mode theory, which fails to predict the absorption enhancement achieved in this work, extending its validity to the case of decoupled front/back texturing. Our approach results in substantially high photocurrent density (>36 mA/cm 2 ), creating a platform suitable for high efficiency single and multi-junction thin-film solar cells based either on typical silicon alloys or on the novel and promising barium (di)silicide (BaSi2) absorber. In the latter case, using the same advanced light trapping employed for nc-Si:H, we demonstrate a very high implied photocurrent density of 41.1 mA/cm 2 , for a device endowed with 2-μm thick absorber.

14 SOLAR ENERGY↗

Updates on the DebriSat Hypervelocity Experiment and Characterization of Fragments in Support of Environmental Models

To develop, maintain, and update orbital debris environmental and break-up models, such as the NASA Orbital Debris Engineering Model (ORDEM) and the NASA Standard Satellite Breakup Model (SSBM), the NASA Orbital Debris Program Office (ODPO) relies on the most recent validated datasets from various measurement sources, both laboratory and environmental. One key project that will provide insight for break-up events using modern-day spacecraft materials and construction techniques is the DebriSat laboratory hypervelocity-impact test. Based on the mass of the target, the projectile, and the impact velocity, the expected number of fragments greater than 2 mm, generated using the NASA SSBM, was estimated to be close to 85,000. To date, the DebriSat fragment database continues to grow, with over 200,000 fragments collected that will help inform updates to the SSBM. Additionally, the growing fragment ensemble will support key parameters for the next release of NASA’s environmental models, employing fragment shapes, densities, and size distributions. To further support these environmental models, specifically the size parameter used in ground-based optical measurements, optical characterization on a subset of DebriSat fragments is being conducted in ODPO’s Optical Measurement Center (OMC). Broadband bidirectional reflectance distribution (BRDF) measurements will provide insight into the optical-based NASA Size Estimation Model (OSEM). The OSEM equates an object’s brightness to size (e.g., diameter of a disk or sphere) given several assumed parameters, including a defined phase function, albedo, and range. To address the first defined parameter, the ODPO has been using ray-tracing software to simulate light conditions in the OMC and to generate phase functions (i.e., specular, Lambertian, and experimentally-derived) of known shapes, materials, and sizes. This simulated data, in addition to the experimentally derived measurements collected in the OMC, will aid in determining whether a new phase function would be suitable for an updated OSEM. The OSEM also assumes a single-value albedo, thus preimpact spectral measurements on a subset of DebriSat materials were acquired for baseline material characterization and to provide insight into spacecraft material taxonomies. This DebriSat spectral data, along with spectral measurements from other known spacecraft material samples, will allow for better analyses of albedo variations and the effect on size calculations of defined laboratory targets, thus further supporting OSEM updates. This paper provides an overview of DebriSat, the status of the project, updates on the parameter distributions, an overview of the NASA SSBM, and ongoing fragment characterization efforts within the OMC.

Heather Cowardin↗

Updates on the Debrisat Hypervelocity Experiment and Characterization of Fragments in Support of Environmental Models

To develop, maintain, and update orbital debris environmental and break-up models, such as the NASA Orbital Debris Engineering Model (ORDEM) and the NASA Standard Satellite Breakup Model (SSBM), the NASA Orbital Debris Program Office (ODPO) relies on the most recent validated datasets from various measurement sources, both laboratory and environmental. One key project that will provide insight for break-up events using modern-day spacecraft materials and construction techniques is the DebriSat laboratory hypervelocity-impact test. Based on the mass of the target, the projectile, and the impact velocity, the expected number of fragments greater than 2 mm, generated using the NASA SSBM, was estimated to be close to 85,000. To date, the DebriSat fragment database continues to grow, with over 200,000 fragments collected that will help inform updates to the SSBM. Additionally, the growing fragment ensemble will support key parameters for the next release of NASA’s environmental models, employing fragment shapes, densities, and size distributions. To further support these environmental models, specifically the size parameter used in ground-based optical measurements, optical characterization on a subset of DebriSat fragments is being conducted in ODPO’s Optical Measurement Center (OMC). Broadband bidirectional reflectance distribution (BRDF) measurements will provide insight into the optical-based NASA Size Estimation Model (OSEM). The OSEM equates an object’s brightness to size (e.g., diameter of a disk or sphere) given several assumed parameters, including a defined phase function, albedo, and range. To address the first defined parameter, the ODPO has been using ray-tracing software to simulate light conditions in the OMC and to generate phase functions (i.e., specular, Lambertian, and experimentally-derived) of known shapes, materials, and sizes. This simulated data, in addition to the experimentally derived measurements collected in the OMC, will aid in determining whether a new phase function would be suitable for an updated OSEM. The OSEM also assumes a single-value albedo, thus pre-impact spectral measurements on a subset of DebriSat materials were acquired for baseline material characterization and to provide insight into spacecraft material taxonomies. This DebriSat spectral data, along with spectral measurements from other known spacecraft material samples, will allow for better analyses of albedo variations and the effect on size calculations of defined laboratory targets, thus further supporting OSEM updates. This paper provides an overview of DebriSat, the status of the project, updates on the parameter distributions, an overview of the NASA SSBM, and ongoing fragment characterization efforts within the OMC.

Heather Cowardin↗

Generation of THz transients by photoexcited single-crystal GaAs meso-structures

We report a sub-picosecond photoresponse and THz transient generation of GaAs single-crystal mesoscopic platelets excited by femtosecond optical pulses. Our structures were fabricated by a top-down technique, by patterning an epitaxial, 500-nm-thick GaAs film grown on top of an AlAs sacrificial layer and then transferring the resulting etched away 10 x 20-μm 2 platelets onto an MgO substrate using a micropipette. The freestanding GaAs devices, incorporated into an Au coplanar strip line, exhibited extremely low dark currents and ~0.4 % detection efficiency at 10 V bias. The all-optical, pump–probe carrier dynamics analysis showed that, for 800-nm-wavelength excitation, the intrinsic relaxation of photocarriers featured a 310-fs-wide transient with a 290 fs fall time. We have also carried out a femtosecond, timeresolved electro-optic characterization of our devices and recorded along the transmission line the electrical transients as short as ~600 fs, when the platelet was excited by a train of 100-fs-wide, 800-nm-wavelength optical laser pulses. The platelets have been also demonstrated to be very efficient generators of free-space propagating THz transients with the spectral bandwidth exceeding 2 THz.The presented performance of the epitaxial, freestanding GaAs meso-structured photodevices makes them uniquely suitable for THz-frequency optoelectronic applications, ranging from ultrafast photodetectors to THz-bandwidth optical-to-electrical transducers and photomixers.

42 ENGINEERING↗