Search NASA⌕ Search

SEARCH · Search NASA

Results for “passive structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Testing of DLR C/C-SiC and C/C for HIFiRE 8 Scramjet Combustor

Ceramic Matrix Composites (CMCs) have been proposed for use as lightweight hot structures in scramjet combustors. Previous studies have calculated significant weight savings by utilizing CMCs (active and passive) versus actively cooled metallic scramjet structures. Both a carbon/carbon (C/C) and a carbon/carbon-silicon carbide (C/C-SiC) material fabricated by DLR (Stuttgart, Germany) are being considered for use in a passively cooled combustor design for Hypersonic International Flight Research Experimentation (HIFiRE) 8, a joint Australia / Air Force Research Laboratory hypersonic flight program, expected to fly at Mach 7 for approximately 30 sec, at a dynamic pressure of 55 kilopascals. Flat panels of the DLR C/C and C/C-SiC materials were installed downstream of a hydrogen-fueled, dual-mode scramjet combustor and tested for several minutes at conditions simulating flight at Mach 5 and Mach 6. Gaseous hydrogen fuel was used to fuel the scramjet combustor. The test panels were instrumented with embedded Type K and Type S thermocouples. Zirconia felt insulation was used during some of the tests to reduce heat loss from the back surface and thus increase the heated surface temperature of the C/C-SiC panel approximately 177 C (350 F). The final C/C-SiC panel was tested for three cycles totaling over 135 sec at Mach 6 enthalpy. Slightly more erosion was observed on the C/C panel than the C/C-SiC panels, but both material systems demonstrated acceptable recession performance for the HIFiRE 8 flight.

Glass, David E.↗
DOE OSTI2022

Opportunities and Challenges in Passive Thermal-Fluid and Energy Systems

Abstract This article focuses on passive systems that are used in energy and thermal-fluid applications. These passive systems do not have moving parts and are reliable and cost-effective. Fluid motion in these passive devices could be driven by capillary force, gravity, osmotic pressure, and/or concentration gradient. The fundamental mechanisms and limitations of transport phenomena for passive systems are highlighted, followed by their applications in heat pipes, fuel cells, thermal energy storage, and desalination systems. The capabilities of the passive systems are limited by the balance between the driving force and transport resistance. Based on the fundamental understanding of fluid flow and phase change in passive systems, this study proposes associated transport phenomena and quantitative criteria to determine the maximum heat transfer rate, the transport distance, and minimum pore size of wick structures (when relevant) in these passive devices. This article concludes with the discussion of challenges and future opportunities of passive systems.

Engineering↗
NASA NTRS2003

Assimilation of Precipitation Information Retrieved from Passive Microwave Sensors

Estimates of surface precipitation and the associated vertical latent heating structure can be retrieved from space-borne passive microwave sensors such as the TRMM Microwave Imager (TMI) and Special Sensor Microwave/Imager (SSM/I). Studies have shown that assimilation of microwave rain rates can improve the quality of global analysis and forecast. Numerical weather prediction (NWP) centers are beginning to make operational use of these data. In the next few years, there will be a gradual increase in microwave rain products available from operational and research satellites, culminating to a target constellation of 9 satellites to provide global rain measurements every 3 hours with the proposed Global Precipitation Measurement (GPM) mission to be launched around 2007. Realizing the full potential of these observations in data assimilation will require continued advances in retrieval algorithms, assimilation techniques, and model physics. I present results from two research efforts at NASA GSFC. The first is on the assimilation of tropical precipitation using temperature/moisture tendency corrections within a continuous variational assimilation framework to improve analyses and forecasts produced by the Goddard Earth Observing System (GEOS) global data assimilation system. Results show that assimilation of TMI and SSM/I rain rates improves not only precipitation and moisture, but also the related clouds, radiation energy fluxes, and large-scale circulations in GEOS analyses. The improved analyses also yield better short-range forecasts, quantitative precipitation forecast (QPF) threat scores, and storm track predictions. The second part consists of results from exploratory experiments on variational assimilation of convective and stratiform latent heating profiles within the general framework of model parameter estimation as a way to identify systematic model errors and optimize physical paremeterization schemes in global forecast and climate models.

Hou, Arthur Y.↗
NASA NTRS1990

Transport Of Passive Scalars In A Turbulent Channel Flow

Computer simulation of transport of passive scalars in turbulent channel flow described in report. Shows flow structures and statistical properties. As used here, "passive scalars" means scalar quantities like fluctuations in temperature or concentrations of contaminants that do not disturb flow appreciably. Examples include transport of heat in heat exchangers, gas turbines, and nuclear reactors and dispersal of pollution in atmosphere.

Kim, John↗
NASA NTRS1990

Development of an active truss element for control of precision structures

An active structural element for use in precision control of large space structures is described. The active member is intended to replace a passive strut in a truss-like structure. It incorporates an eddy current displacement sensor and an actuator that is either piezoelectric (PZT) or electrostrictive (PMN). The design of the device is summarized. Performance of separate PZT and PMN actuators is compared for several properties relevant to submicrometer control of precision structures.

Anderson, Eric H.↗
DOE OSTI2019

Investigation of a passively Q-switched Raman laser at 1176 nm with Nd{sup 3+}:YAG/Cr{sup 4+}:YAG/YAG composite crystal and a coupled cavity

To reduce the thermal lens effect and increase the efficiency, a composite crystal of Nd{sup 3+}:YAG/Cr{sup 4+}:YAG/YAG and a coupled cavity structure were employed in our passively Q-switched YVO{sub 4}-based Raman laser system. Both the simulation and the experiment results showed that the undoped YAG crystal bonded in the end-face of Cr{sup 4+}:YAG crystal can speed up the heat transfer of Cr{sup 4+}:YAG crystal and reduce the temperature difference between its side surfaces and the center significantly, and the coupled cavity structure can improve the laser performance, especially at high pump power. The maximum output power of Raman laser of 0.92 W at 1176 nm was obtained with an optical-to-optical efficiency of 11.51%. The corresponding repetition rate and the pulse width is 53.5 kHz and 3.22 ns, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Defect Luminescence from Wurtzite CuInS 2 Nanocrystals: Combined Experimental and Theoretical Analysis

CuInS 2 nanocrystals with the wurtzite structure show promise for applications requiring efficient energy transport due to their anisotropic crystal structure. We investigate the source of photoluminescence in the near-infrared spectral region recently observed from these nanocrystals. Spectroscopic studies of both wurtzite CuInS 2 itself and samples alloyed with Cd or Zn allow the assignment of this emission to a radiative point defect within the nanocrystal structure. Further, by varying the organic passivation layer on the material, we are able to determine that the atomic species responsible for nonradiative decay paths on the nanocrystal surface are Cu- or S-based. Density functional theory calculations of defect states within the material allow identification of the likely radiative species. In conclusion, understanding both the electronic structure and optical properties of wurtzite CuInS 2 nanocrystals is necessary for their efficient integration into potential biological, photovoltaic, and photocatalytic applications.

Chemical structure↗
DOE OSTI2023

In situ probing the origin of interfacial instability of Na metal anode

The unstable and fragile solid electrolyte interphase (SEI) has restricted the application of Na metal anodes. Despite numerous research efforts being put into understanding its chemical composition and physical properties, direct observation of its formation remains a challenge due to the lack of temporal and spatial resolution. Here, through combined in situ probing techniques, we exhibit two pivotal stages associated with SEI instability during the often -neglected formation process. It is revealed that Na metal that is not uniformly passivated at the initial (passivating) stage will trigger unrestricted electrolyte decomposition and homogeneous components distribution during the subsequent (growing) stage. SEI with homogenously distributed components is found to have higher solubility than that with a layered structure evolved from a compact passivation layer. Furthermore, through demonstrating an SEI dissolution model that is closely related to its formation process and compositional distribution, this work sheds light on an uncharted territory of Na metal batteries.

25 ENERGY STORAGE↗
NASA NTRS1986

Identification of nonlinear structural elements by force-state mapping

A major contributor to the passive damping and potentially nonlinear behavior of large space structures is the behavior of the joints. Proposed is an experimental technique called 'force-state mapping' that will allow ground testing of these key structural elements. The technique includes the use of very accurate instrumentation to measure the force transmission properties of a structural element as a function of its mechanical state. When these data are presented in the form of a force-state map, the nonlinearities exhibit distinctively recognizable patterns. This presentation of the data allows the extraction of the describing parameters of the linear and nonlinear behavior and the energy dissipation characteristics of the joint. A series of tests were carried out on an idealized laboratory test article to demonstrate the technique. Strong structural nonlinearities, including a cubic hardening spring, friction, and impact phenomena, were introduced and measured. Parameters identified by the force-state mapping technique are compared with those made by traditional techniques and the errors involved in the measurement are estimated.

Crawley, E. F.↗
NASA NTRS1973

Velocity structure and evolution of the moon

Seismic data from the Apollo Passive Seismic Network stations are analyzed to determine the velocity structure and to infer the composition and physical properties of the lunar interior. Data from artificial impacts (SIBV booster and LM-ascent stage) cover a distance range of 9 to 1750 km. Travel times and amplitudes, as well as theoretical seismograms, are used to derive a velocity model for the outer 150 km of the moon. The P-wave velocity model confirms an earlier report of a lunar crust in the eastern part of Oceanus Procellarum. The crust is about 60 km thick and may consist of two layers in the mare regions. Possible values for the P-wave velocity in the uppermost mantle are between 7.6 and 9.0 km/sec. The 9 km/sec velocity represents either a localized heterogeneous unit, or a thin layer less than about 40 km in thickness. The elastic properties of the deep interior, as inferred from the seismograms of natural events (meteoroid impacts and moonquakes) occurring at great distances, indicate that there is an increase in attenuation and a possible decrease of velocity at depths below about 1000 km.

Toksoz, M. N.↗
DOE OSTI2016

Passive Longitudinal-Phase-Space Tailoring of Non-Ultrarelativistic Beams with Dielectric-Lined Waveguides

To date conventional use of dielectric-lined waveguides (DLWs) has mainly concerned high-gradient acceleration. In this paper we investigate an alternative use of such waveguides to impressed wakefield-induced energy correlations on non-ultra-relativistic beams. These correlations are shown to produce density modulations as the beam drifts in a free space. We explore several schemes with a single or multiple DLW structures which can lead to passive compressions and to the formation of sub-picosecond bunch trains. We finally suggest the possible use of multiple structures to bunch the beam at higher frequencies using a scheme similar to a two-stage echo enabled harmonic generation.

43 PARTICLE ACCELERATORS↗
NASA NTRS1986

System structural test results - Six PODS III supports

Passive orbital disconnect struts can potentially reduce the support conductance a factor of 10 over state-of-the-art tension band nondisconnect supports and cut helium dewar weights in half for the same lifetime. A series of thermal and structural tests were performed to verify that this performance improvement is real. Structural tests on a PODS-III support system (consisting of six struts) is reported here. The results show the predicted performance improvements can be achieved and the PODS-III supports are ready for flight applications. For large tankage systems requiring higher side load capability, a PODS-IV version is currently being developed.

Parmley, Richard T.↗
DOE OSTI2022

AlInP-passivated III–V solar cells grown by dynamic hydride vapor-phase epitaxy

We report the development of AlInP-passivated solar cells grown by dynamic hydride vapor-phase epitaxy (D-HVPE) with AM1.5G efficiencies of 26.0% for single-junction (1J) GaAs cells and 28.0% for GaInP/GaAs (2J) tandems. We compare the device performance of solar cells passivated with AlInP versus control cells passivated with GaInP, which has already enabled near-unity carrier collection in GaAs solar cells. 1J devices passivated with either AlInP or GaInP have an identical open-circuit voltage (V OC ) of 1.06 V and long-wavelength current collection near 95%, indicating that both window materials provide a similar degree of passivation. Adding AlInP passivation to each solar cell structure improves the current collection by 1.3 and 1 mA/cm 2 for the 1J and 2J, respectively. The AlInP also results in a top cell V OC boost of ~40 mV relative to a tandem device passivated only by a thin, highly doped GaInP emitter. Secondary-ion mass spectrometry measurements indicate that although O and Si both incorporate in the AlInP window, they do not appear in the subsequently grown absorber layers and do not impact its ability to passivate the front surface. We expect that these achievements, along with continued optimization, will enable parity of hydride vapor-phase epitaxy (HVPE)-grown device efficiencies with state-of-the-art devices grown by other epitaxial methods in the near future.

14 SOLAR ENERGY↗
DOE OSTI2018

Effect of nitrogen passivation on interface composition and physical stress in SiO 2 /SiC(4H) structures

Here, the electron density and physical stress at the thermally oxidized SiC/SiO 2 interface, and their change with nitrogen incorporation, were observed using x-ray reflectivity, Raman scattering, and a novel stress determination technique. There is no evidence for residual carbon species at the SiO 2 /SiC. Instead, a ~1 nm thick low electron density layer is formed at this interface, consistent with interfacial suboxides (SiO x , 0.3 < x < 2), along with high interfacial stress. Nitrogen passivation, a known process to improve the interface state density and electronic properties, eliminates the low density component and simultaneously releases the interface stress. On the basis of these findings, a new chemical interaction model is proposed to explain the effect of the nitrogen, and a guideline, stress managing together with elemental control of the dielectric/SiC interface, is suggested to achieve high quality gate stack on SiC.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Passive and active control of jet turbulence

Techniques for controlling the generation, growth, and interactions of large coherent structures in turbulent flows are discussed, reviewing the results of recent experimental investigations. The fundamental principles of active and passive coherent-structure manipulation are outlined; the effects of geometric modification are examined for the case of an elliptic jet; and particular attention is given to passive control via self-excitation, turbulence and noise suppression, control of pairing interaction via two-frequency excitation, and unsteady boundary-layer separation in wall jets. Diagrams and graphs of typical results are provided.

Fazle Hussain, A. K. M.↗