Search NASA⌕ Search

SEARCH · Search NASA

Results for “placement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Optimization of mass placement in Space Station applications

A methodology is presented by means of which the projected NASA Space Station's structural elements, primarily involving externally attached masses reresenting payloads, can be prearranged to meet all constraints imposed on Station design by mission type, safety, and physical criteria. Five different configurations are considered. The methodology has been automated in the form of a computer-aided engineering tool for the optimization of masses with respect to the products of inertia. By minimizing the induced gravity-gradient torques, the momentum buildup over an orbital period is also minimized.

Ferebee, M. J., Jr.↗
NASA NTRS1988

Optimal placement of tuning masses for vibration reduction in helicopter rotor blades

Described are methods for reducing vibration in helicopter rotor blades by determining optimum sizes and locations of tuning masses through formal mathematical optimization techniques. An optimization procedure is developed which employs the tuning masses and corresponding locations as design variables which are systematically changed to achieve low values of shear without a large mass penalty. The finite-element structural analysis of the blade and the optimization formulation require development of discretized expressions for two performance parameters: modal shaping parameter and modal shear amplitude. Matrix expressions for both quantities and their sensitivity derivatives are developed. Three optimization strategies are developed and tested. The first is based on minimizing the modal shaping parameter which indirectly reduces the modal shear amplitudes corresponding to each harmonic of airload. The second strategy reduces these amplitudes directly, and the third strategy reduces the shear as a function of time during a revolution of the blade. The first strategy works well for reducing the shear for one mode responding to a single harmonic of the airload, but has been found in some cases to be ineffective for more than one mode. The second and third strategies give similar results and show excellent reduction of the shear with a low mass penalty.

Pritchard, Jocelyn I.↗
NASA NTRS1988

Optimal placement of tuning masses for vibration reduction in helicopter rotor blades

Methods are presented for the reduction of helicopter rotor blade vibration through a formal mathematical optimization technique determination of optimum tuning mass sizes and locations; these are used as design variables that are systematically changed to achieve low values of shear without large mass penalty. Matrix expressions are obtained for the modal shaping parameter and modal shear amplitude that are required for FEM structural analysis of the blade as well as the optimization formulation. Sensitivity derivatives are also obtained. Three different optimization strategies are developed and tested.

Pritchard, Jocelyn I.↗
NASA NTRS1987

Linear quadratic regulators with eigenvalue placement in a horizontal strip

A method for optimally shifting the imaginary parts of the open-loop poles of a multivariable control system to the desirable closed-loop locations is presented. The optimal solution with respect to a quadratic performance index is obtained by solving a linear matrix Liapunov equation.

Shieh, Leang S.↗
NASA NTRS1989

Optimal Placement Of Multiple Antennas

Computer program based on pair of algorithms selects approximately optimal locations of antennas and approximately optimal number of elements in each antenna of multiple-antenna communication system. Obscuration in field of view at given antenna location taken into account in choice of number of antenna elements mounted there. Directional coverages of combinations of up to four antenna elements computed in search for combination to cover clear portion of field of view. Developed to aid design of antenna system of conceptual space station. Applied to system aboard ship or aircraft, on building in city, or in any location where transmission and reception blocked in some directions from each potential antenna-mounting point.

Shelton, Kyle W.↗
NASA NTRS1988

Lunar placement of Mars quarantine facility

Advanced mission scenarios are currently being contemplated that would call for the retrieval of surface samples from Mars, from a comet, and from other places in the solar system. An important consideration for all of these sample return missions is quarantine. Quarantine facilities on the Moon offer unique advantages over other locations. The Moon offers gravity, distance, and vacuum. It is sufficiently near the Earth to allow rapid resupply and easy communication. It is sufficiently distant to lessen the psychological impact of a quarantine facility on Earth's human inhabitants. Finally, the Moon is airless, and seems to be devoid of life. It is, therefore, more suited to contamination control efforts.

Davidson, James E.↗
NASA NTRS1989

Control surface spanwise placement in active flutter suppression systems

All flutter suppression systems require sensors to detect the movement of the lifting surface and to activate a control surface according to a synthesized control law. Most of the work performed to date relates to the development of control laws based on predetermined locations of sensors and control surfaces. These locations of sensors and control surfaces are determined either arbitrarily, or by means of a trial and error procedure. The aerodynamic energy concept indicates that the sensors should be located within the activated strip. Furthermore, the best chordwise location of a sensor activating a T.E. control surface is around the 65 percent chord location. The best chordwise location for a sensor activating a L.E. surface is shown to lie upstream of the wing (around 20 percent upstream of the leading edge), or alternatively, two sensors located along the same chord should be used.

Nissim, E.↗
NASA NTRS1988

Linear quadratic regulators with eigenvalue placement in a specified region

A linear optimal quadratic regulator is developed for optimally placing the closed-loop poles of multivariable continuous-time systems within the common region of an open sector, bounded by lines inclined at + or - pi/2k (k = 2 or 3) from the negative real axis with a sector angle of pi/2 or less, and the left-hand side of a line parallel to the imaginary axis in the complex s-plane. The design method is mainly based on the solution of a linear matrix Liapunov equation, and the resultant closed-loop system with its eigenvalues in the desired region is optimal with respect to a quadratic performance index.

Shieh, Leang S.↗
NASA NTRS1990

A method for optimal actuator and sensor placement for large flexible structures

A method of finding the optimal sensor and actuator locations for the control of flexible structures has been developed. The method is based on the orthogonal projection of structural modes into the intersection subspace of the controllable and observable subspaces. The controllability and observability grammians are then used to weight the projections to reflect the degrees of controllability and observability. This method produces a three-dimensional design space wherein sets of optimal actuator and sensors may be selected.

Lim, K. B.↗
NASA NTRS1990

Low-g payload placement constraints for space station

Payloads onboard the Space Station will be subjected to a steady state acceleration level dominated by gravity gradient and aerodynamic drag forces. The g-level due to gravity gradient forces depends on the payload location relative to the center of mass, whereas the g-level due to aerodynamic drag may be assumed nearly constant throughout the Space Station. The vector of acceleration due to aerodynamic drag can always be broken down into three orthogonal components, in the direction opposite to the velocity vector, along the local vertical, and perpendicular to the orbit plane. It will be shown that the gravity gradient term has two components, which are orthogonal to one another. One component is along the local vertical and the other is perpendicular to the orbit plane. Thus, the combination of all components form an orthogonal triad of vectors. Addressed here are the payload location constraints to satisfy the requirements of 1 micro-g. The permissible locations are within an open-ended tube having an elliptical cross section, which is aligned with the velocity vector and centered on the system center of mass.

Carpenter, Anita S.↗
NASA NTRS1991

ATLS: Catheter and tube placement

The specific objectives of this experiment are: to evaluate the rack mounted equipment and medical supplies necessary for medical procedures; to evaluate the attachments, mounting points, and inner drawer assemblies for the medical supplies; and to evaluate the procedures for performing medical scenarios. The resources available in the HMF miniracks to accomplish medical scenarios and/or procedures include: medical equipment mounted in the racks; a patch panel with places to attach tubing and catheters; self contained drawers full of critical care medical supplies; and an ALS 'backpack' for deploying supplies. The attachment lines, tubing and associated medical supplies will be deployed and used with the equipment and a patient mannequin. Data collection is provided by direct observations by the inflight experimenters, and analysis of still and video photography.

Gosbee, John↗
NASA NTRS1989

Actuator placement by degree of controllability including the effect of actuator mass

Various concepts of the degree of controllability (DOC) have been previously developed for the purpose of choosing actuator locations in the control of large flexible spacecraft. A perturbation technique is presented to efficiently account for the actuator mass in the computation of the fuel-optimal, time-optimal, and energy-optimal DOC definitions. Methods are developed for computing each of the three DOCs, when the mass of the actuator is nonnegligible. The energy-optimal DOC is employed to find optimal actuator locations for a large spacecraft under study by the NASA Langley Research Center. The mass of the actuator is seen to have a significant effect on the optimal actuator locations and is shown to spread the actuator locations more evenly for large mass actuators. Results indicate that when the actuator mass is large when compared to the structural mass it should be included in selecting actuator locations.

Longman, R. W.↗
NASA NTRS1990

A design algorithm using Z-plane closed loop pole placement

It is argued that the design of a single input single output (SISO) control system is simplified if the designer has direct control over the closed loop poles. A space-laser-communications design example utilizing a two-transform algorithm that constructs a generic discrete compensator is presented. The plant in the example has an anti-aliasing filter, a double integrator, a torquer time constant, and a sample-and-hold as continuous elements, and a discrete proportional plus integral module. This fifth-order system is representative of many instrument pointing control systems. Poles resulting from the compensator are placed near the origin of the Z-plane so that the response is dominated by the closed loop poles from the plant. Root locus, time response, and frequency response data are given. Normalization by the sample interval is used to provide a dimensionless example.

Gatlin, James A.↗