Search NASA⌕ Search

SEARCH · Search NASA

Results for “points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Dynamic and control assessment of the Space Station Freedom payload pointing system

An analysis of the proposed Space Station Freedom Payload Pointing System (PPS) was performed to assess its dynamic payload pointing capability in the dynamic environment of the Space Station Freedom (SSF). In addition, the stability and control the the SSF was examined to verify the capability of its control devices to accommodate the impact of PPS operations. An analysis of the PPS ability to provide continuous, accurate pointing was performed and compared to the program requirements specified in the 1988 Program Definition and Requirement Document (PDRD). Results indicated that the PPS was not able to perform within the program requirements during the worst case scenario of a shuttle hard docking maneuver to the port side SSF docking adapter. The PPS maintained marginal pointing accuracy during crew treadmill activity. The Space Station attitude control system easily accommodated all PPS operations simulated. The PPS caused a negligible impact on the SSF's control environment.

Shannon, David T., Jr.↗
NASA NTRS1991

Initial pointing calibrations for the DSS 13 34-meter beam-waveguide antenna

The beam pointing of the Deep Space Station (DSS) 13 beam-waveguide antenna at the Goldstone Venus site was calibrated during the postconstruction performance testing period from Jul. 1990 through Jan. 1991. The pointing calibrations were based on errors measured on radio sources at both the Cassegrain and centerline beam-waveguide focal points. The blind pointing performance goal of 5.0 mdeg, 3-sigma at Ka-band (32 GHz) was demonstrated to be met for low (less than 10 mph) wind conditions.

Alvarez, L. S.↗
NASA NTRS1989

Effects of the ephemeris error on effective pointing for a spaceborne SAR

Both Magellan SAR data acquisition and image processing require the knowledge of both the ephemeris (spacecraft position and velocity) and the radar pointing direction. Error in the knowledge of the radar pointing direction results in a loss of SNR in the image product. An error in the ephemeris data has a similar effect. To facilitate SNR performance analysis, an effective pointing error is defined to characterize the effect of the ephemeris error. A systematic approach to relate the ephemeris error to the effective pointing errors is described. Result of this analysis has led to a formal accuracy requirement levied on the Magellan navigation system.

Jin, Michael Y.↗
NASA NTRS1991

Hubble Space Telescope pointing control system: Designed for performance and mission operations

The Hubble Space Telescope was designed to be an orbiting astronomical observatory which could be operated in the same manner as ground based observatories. The design drivers for the pointing control system's hardware and software were the requirements of an absolute pointing accuracy of 4.8E-8 radians and pointing stability (jitter) of 3.4E-8 radians. Of comparable importance was the objective of providing a flexible command methodology and structure to enable seven day operational planning employing stored program command and real time command capability. The pointing control system hardware, software, safemode control schemes, ground system monitoring capability, and in-orbit results are reviewed.

Bradley, A.↗
NASA NTRS1992

Structure of the magnetopause current layer at the subsolar point

Attention is given to a 1D electromagnetic particle simulation model developed for the magnetopause current layer between the shocked solar wind and the dipole magnetic field at the subsolar point, which was extended to include the IMF in the solar wind. Interaction of the solar wind with the vacuum dipole field as well as the dipole field filled with a low-density magnetospheric plasma are investigated. The width and structure of the magnetopause current layer are found to differ markedly depending on the direction of the IMF. When the IMF is pointing southward, the current layer between the solar wind and the dipole field is narrow, and the magnetic field has a single ramp structure caused by the reflection of the solar wind at that point. The current layer becomes several times wider and the magnetic field develops a multiple ramp structure when the IMF is northward. Comparisons of these simulation results with the recent spacecraft data of the magnetopause crossing near the subsolar point are provided.

Okuda, H.↗
NASA NTRS1991

A vision-based end-point control for a two-link flexible manipulator

The measurement and control of the end-effector position of a large two-link flexible manipulator are investigated. The system implementation is described and an initial algorithm for static end-point positioning is discussed. Most existing robots are controlled through independent joint controllers, while the end-effector position is estimated from the joint positions using a kinematic relation. End-point position feedback can be used to compensate for uncertainty and structural deflections. Such feedback is especially important for flexible robots. Computer vision is utilized to obtain end-point position measurements. A look-and-move control structure alleviates the disadvantages of the slow and variable computer vision sampling frequency. This control structure consists of an inner joint-based loop and an outer vision-based loop. A static positioning algorithm was implemented and experimentally verified. This algorithm utilizes the manipulator Jacobian to transform a tip position error to a joint error. The joint error is then used to give a new reference input to the joint controller. The convergence of the algorithm is demonstrated experimentally under payload variation. A Landmark Tracking System (Dickerson, et al 1990) is used for vision-based end-point measurements. This system was modified and tested. A real-time control system was implemented on a PC and interfaced with the vision system and the robot.

Obergfell, Klaus↗
NASA NTRS1993

An efficient method to compute microlensed light curves for point sources

We present a method to compute microlensed light curves for point sources. This method has the general advantage that all microimages contributing to the light curve are found. While a source moves along a straight line, all micro images are located either on the primary image track or on the secondary image tracks (loops). The primary image track extends from - infinity to + infinity and is made of many sequents which are continuously connected. All the secondary image tracks (loops) begin and end on the lensing point masses. The method can be applied to any microlensing situation with point masses in the deflector plane, even for the overcritical case and surface densities close to the critical. Furthermore, we present general rules to evaluate the light curve for a straight track arbitrary placed in the caustic network of a sample of many point masses.

Witt, Hans J.↗
NASA NTRS1993

Pointing and figure control system for a space-based far-IR segmented telescope

A pointing and figure control system for two space-based far-IR telescopes, the 10-20 m Large Deployable Reflector and the 3.6 m Submillimeter Intermediate Mission, is described. The figure maintenance control system is designed to counter the optical elements translational and rotational changes induced by long-term thermal drifts that the support structure may experience. The pointing system applies optical truss to telescope pointing; a laser metrology system is used to transfer pointing informaton from an external fine guidance sensor to the telescope optical boresight, defined by the primary mirror, secondary mirror, and focal plane assembly.

Lau, Kenneth↗
NASA NTRS1934

A complete tank test of a flying-boat hull with a pointed step -N.A.C.A. Model No. 22

The results of a complete tank test of a model of a flying-boat hull of unconventional form, having a deep pointed step, are presented in this note. The advantage of the pointed-step type over the usual forms of flying-boat hulls with respect to resistance at high speeds is pointed out. A take-off example using the data from these tests is worked out, and the results are compared with those of an example in which the test data for a hull of the type in general use in the United States are applied to a flying boat having the same design specifications. A definite saving in take-off run is shown by the pointed-step type.

Shoemaker, James M↗
NASA NTRS1938

A method of rapidly estimating the position of the laminar separation point

A method is described of rapidly estimating the position of the laminar separation point from the given pressure distribution along a body; the method is applicable to a fairly wide variety of cases. The laminar separation point is found by the von Karman-Millikan method for a series of velocity distributions along a flat plate, which consist of a region of uniform velocity followed by a region of uniform decreased velocity. It is shown that such a velocity distribution can frequently replace the actual velocity distribution along a body insofar as the effects on laminar separation are concerned. An example of the application of the method is given by using it to calculate the position of the laminar separation point on the NACA 0012 airfoil section at zero lift. The agreement between the position of the separation point calculated according to the present method and that found from more elaborate computations is very good.

Von Doenhoff, Albert E↗
NASA NTRS1946

Properties of low-aspect-ratio pointed wings at speeds below and above the speed of sound

Low-aspect-ratio wings having pointed plan forms are treated on the assumption that the flow potentials in planes at right angles to the long axis of the airfoils are similar to the corresponding two-dimensional potentials. For the limiting case of small angles of attack and low aspect ratios the theory brings out the following significant properties: (1) The lift of a slender, pointed airfoil moving in the direction of its long axis depends on the increase in width of the sections in a downstream direction. Sections behind the section of maximum width develop no lift. (2) The spanwise loading of such an airfoil is independent of the plan form and approaches the distribution giving a minimum induced drag. (3) The lift distribution of a pointed airfoil travelling point-foremost is relatively unaffected by the compressibility of the air below or above the speed of sound. A best of a triangular airfoil at a Mach number of 1.75 verified the theoretical values of lift and center of pressure.

WINGS, DELTA↗
NASA NTRS1944

Some Notes on the Determination of the Stick-Free Neutral Point from Wind-Tunnel Data

Two graphical methods are presented for determining the stick-free neutral point, and they are extensions of the methods commonly used to determine the stick-free neutral point. A mathematical formula for computing the stick-free neutral point is also given. These methods may be applied to determine approximately the increase in tail size necessary to shift the neutral point (stick fixed or free) to any desired location on an airplane having inadequate longitudinal stability.

STABILITY CALCULATIONS↗
NASA NTRS1991

Using a focal-plane array to estimate antenna pointing errors

The use of extra collecting horns in the focal plane of an antenna as a means of determining the Direction of Arrival (DOA) of the signal impinging on it, provided it is within the antenna beam, is considered. Our analysis yields a relatively simple algorithm to extract the DOA from the horns' outputs. An algorithm which, in effect, measures the thermal noise of the horns' signals and determines its effect on the uncertainty of the extracted DOA parameters is developed. Both algorithms were implemented in software and tested in simulated data. Based on these tests, it is concluded that this is a viable approach to the DOA determination. Though the results obtained are of general applicability, the particular motivation for the present work is their application to the pointing of a mechanically deformed antenna. It is anticipated that the pointing algorithm developed for a deformed antenna could be obtained as a small perturbation of the algorithm developed for an undeformed antenna. In this context, it should be pointed out that, with a deformed antenna, the array of horns and its associated circuitry constitute the main part of the deformation-compensation system. In this case, the pointing system proposed may be viewed as an additional task carried out by the deformation-compensation hardware.

Zohar, S.↗
NASA NTRS1994

Development of POINTS as a planetology instrument

During the reporting period, we carried out investigations required to enhance our design of POINTS as a tool for the search for and characterization of extra-solar planetary systems. The results of that work were included in a paper on POINTS as well as one on Newcomb, which will soon appear in the proceedings of SPIE Conference 2200. (Newcomb is a spinoff of POINTS. It is a small astrometric interferometer now being developed jointly by SAO and the U.S. Navy. It could help establish some of the technology needed for POINTS.) These papers are appended.

Reasenberg, Robert D.↗
NASA NTRS1994

Application of two procedures for dual-point design of transonic airfoils

Two dual-point design procedures were developed to reduce the objective function of a baseline airfoil at two design points. The first procedure to develop a redesigned airfoil used a weighted average of the shapes of two intermediate airfoils redesigned at each of the two design points. The second procedure used a weighted average of two pressure distributions obtained from an intermediate airfoil redesigned at each of the two design points. Each procedure was used to design a new airfoil with reduced wave drag at the cruise condition without increasing the wave drag or pitching moment at the climb condition. Two cycles of the airfoil shape-averaging procedure successfully designed a new airfoil that reduced the objective function and satisfied the constraints. One cycle of the target (desired) pressure-averaging procedure was used to design two new airfoils that reduced the objective function and came close to satisfying the constraints.

Mineck, Raymond E.↗
NASA NTRS1992

A dual purpose optical truss laser metrology system for a space-based far-IR segmented telescope: Figure maintenance and pointing control

To obtain imaging performance as for monolithic mirrors, large segmented reflectors used for astronomy must be actively aligned and pointed to extreme levels of precision. A system concept for a dual purpose optical truss laser metrology system is described which is used for both figure and alignment maintenance and telescope pointing. A two-stage figure active control approach was developed for several proposed spaceborne far infrared segmented telescopes, one of which is the 10-20 meters Large Deployable Reflector (LDR). The first active control stage, the figure initialization control system, aligns the optical elements (i.e., the primary segments, secondary and focal plane assembly) based on images obtained. The second stage, the figure maintenance control system, maintains the alignment between re-initializations using measurements provided by laser interferometers arranged in an optical truss configuration. It measures the relative positions and alignments of the telescope segments so that a controller can reposition them appropriately. The application of this optical truss for figure maintenance control is the subject of the first part of this paper. The second portion of this paper discusses the application of the optical truss to telescope pointing. Here, the laser metrology system is used to transfer pointing information from an external fine guidance sensor (FGS) to the telescope optical boresight as defined by the primary mirror, secondary mirror, and focal plane assembly. Thus, any alignment variations between the two boresights can be observed and accounted for.

Lau, Kenneth↗
NASA NTRS1993

Virtual egocenters as a function of display geometric field of view and eye station point

The accurate location of one's virtual egocenter in a geometric space is of critical importance for immersion technologies. This experiment was conducted to investigate the role of field of view (FOV) and observer station points in the perception of the location of one's egocenter (the personal viewpoint) in virtual space. Rivalrous cues to the accurate location of one's egocenter may be one factor involved in simulator sickness. Fourteen subjects viewed an animated 3D model, of the room in which they sat, binocularly, from Eye Station Points (ESP) of either 300 or 800 millimeters. The display was on a 190 by 245 mm monitor, at a resolution of 320 by 200 pixels with 256 colors. They saw four models of the room designed with four geometric field of view (FOVg) conditions of 18, 48, 86, and 140 degrees. They drew the apparent paths of the camera in the room on a bitmap of the room as seen from infinity above. Large differences in the paths of the camera were seen as a function of both FOVg and ESP. Ten of the subjects were then asked to find the position for each display that minimized camera motion. The results fit well with predictions from an equation that took the ratio of human FOV (roughly 180 degrees) to FOVg times the Geometric Eye Point (GEP) of the imager: Zero Station Point = (180/FOVg)*GEP

Psotka, Joseph↗
NASA NTRS1996

Program Converts VAX Floating-Point Data To UNIX

VAX Floating Point to Host Floating Point Conversion (VAXFC) software converts non-ASCII files to unformatted floating-point representation of UNIX machine. This is done by reading bytes bit by bit, converting them to floating-point numbers, then writing results to another file. Useful when data files created by VAX computer must be used on other machines. Written in C language.

Alves, Marcos↗