SEARCH · Search NASA

Results for “polar orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Second Time-Resolved Observations of Precipitation Structure and Storm Intensity With a Constellation of Smallsats (TROPICS) Mission Applications Workshop

The NASA Time-Resolved Observations of Precipitation structure and storm Intensity with a Constellation of Smallsats (TROPICS) mission is a constellation of state-of-the-science observing platforms that will measure temperature and humidity soundings and precipitation with spatial resolution comparable to current operational passive microwave (PMW) sounders but with unprecedented temporal resolution (Mission Website).1 TROPICS is a cost-capped ($30.2 million), Venture-class mission funded by the NASA Earth Science Division (ESD) and led by Principal Investigator Dr. William Blackwell from the Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). The mission consists of a constellation of six, three-unit (3U) CubeSats (approximately 10×10×34 cm), each hosting a 12-channel PMW spectrometer based on the Micro-sized Microwave Atmospheric Satellite-2 (MicroMAS-2) developed at MIT LL, but with a substantially improved design. TROPICS will provide imagery near 91 and 205 GHz, temperature sounding near 118 GHz, and moisture sounding near 183 GHz. Spatial resolution at nadir will be around 27 km for temperature and 17 km for moisture and precipitation with a swath width of approximately 2,000 km from a 550-km orbit altitude. Both the spatial resolution and swath width are similar to the Advanced Technology Microwave Sounder (ATMS) that is being flown as part of the Suomi National Polar-orbiting Partnership (SNPP) and National Oceanic and Atmospheric Administration (NOAA) Joint Polar Satellite System (JPSS). In addition, TROPICS meets many of the requirements outlined in the 2007 Decadal Survey for the Precision and All-Weather Tempera-ture and Humidity (PATH) mission, which was originally envisioned as a microwave instrument in geostationary orbit. TROPICS enables temporal resolution approaching that of geostationary orbit but at a much lower cost, demonstrating a technology that could impact the design of future Earth-observing missions. The satellites for the TROPICS mission were delivered to NASA in 2019 for launches planned in the 2021–2022 timeframe. The primary mission objective of TROPICS is to relate temperature, humidity, and precipitation structure to the evolution of tropical cyclone (TC) intensity.

remote sensing↗

NASA NTRS1979

Encounter with Venus

The orbiter and multiprobe components of the Pioneer Venus mission are briefly described. The orbiter was launched on May 20, 1978 and was placed into a highly eccentric near-polar orbit around Venus on December 4, 1978, while the multiprobe was launched on August 8, 1978 and reached Venus on December 9, 1978. Parameters of the orbiter orbit are presented, and modifications of the periapsis altitude are described. The time sequences of the probe entry events are reported for the large probe, north probe, day probe, and night probe, which, along with the bus, are the components of the multiprobe. The multiprobe entry and impact locations as well as related data are reported.

Colin, L.↗

NASA NTRS1986

Simulation and analysis of a geopotential research mission

A computer simulation was performed for a Geopotential Research Mission (GRM) to enable study of the gravitational sensitivity of the range/rate measurement between two satellites and to provide a set of simulated measurements to assist in the evaluation of techniques developed for the determination of the gravity field. The simulation, identified as SGRM 8511, was conducted with two satellites in near circular, frozen orbits at 160 km altitude and separated by 300 km. High precision numerical integration of the polar orbits was used with a gravitational field complete to degree and order 180 coefficients and to degree 300 in orders 0 to 10. The set of simulated data for a mission duration of about 32 days was generated on a Cray X-MP computer. The characteristics of the simulation and the nature of the results are described.

Schutz, B. E.↗

NASA NTRS1986

The Earth Radiation Budget Experiment - Early validation results

The primary techniques used to obtain and validate the data of the Earth Radiation Budget Experiment (ERBE) are described, together with preliminary results of the validation. The ERBE consists of radiometers aboard the ERB Satellite, dedicated to a 57-deg orbit, and each of the two NOAA meteorological spacecraft (NOAA 9 and NOAA G) in near polar orbits. The radiometers include scanning narrow field-of-view (FOV) and nadir-looking wide and medium FOV radiometers, and a solar monitoring channel. Measurements of the solar constant by the solar monitors, and the wide and medium FOV radiometers of the ERB and the NOAA 9 spacecraft agree within a fraction of a percent. Comparison of the wide and medium FOV radiometers with the scanning radiometers showed an agreement of 1 to 4 percent. The multiple ERBE satellites are acquiring the first global measurements of regional scale-diurnal variations in the earth's radiation budget. These were verified by comparison with the high-temporal-resolution geostationary satellite data.

Smith, G. L.↗

NASA NTRS1990

Model of the high-latitude ionospheric convection pattern during southward interplanetary magnetic field using DE 2 data

Data from the polar-orbiting satellite DE 2 are used to calculate one-dimensional electrostatic potential distributions across the polar cap region. Using passes that lie within + or - 3 hours MLT of the dawn-dusk line, various parameters of the polar potential distribution (location and magnitude of the maxima and minima, location of the zero potential point, etc.) are analyzed in relation to each other and to the IMF. The resulting dependences are used to derive a two-dimensional model of the distribution of the electrostatic potential in the high-latitude ionosphere during times of southward IMF. This model can be generated using as inputs either the ionospheric potential parameters or, based on the relationships analyzed here, the IMF conditions. The capabilities of the resulting mathematical model are illustrated, and the importance of retaining a flexibility in the model to accommodate individual observations is emphasized.

Hairston, M. R.↗

NASA NTRS1995

(abstract) Venus Gravity Field

A global gravity field model of Venus to degree and order 75 (5772 spherical harmonic coefficients) has been estimated from Doppler radio tracking of the orbiting spacecraft Pioneer Venus Orbiter (1979-1992) and Magellan (1990-1994). After the successful aerobraking of Magellan, a near circular polar orbit was attained and relatively uniform gravity field resolution (approximately 200 km) was obtained with formal uncertainties of a few milligals. Detailed gravity for several highland features are displayed as gravity contours overlaying colored topography. The positive correlation of typography with gravity is very high being unlike that of the Earth, Moon, and Mars. The amplitudes are Earth-like, but have significantly different gravity-topography ratios for different features. Global gravity, geoid, and isostatic anomaly maps as well as the admittance function are displayed.

Venus gravity field model gravity-topography ratio↗

NASA NTRS2015

Lunar Flashlight

The Lunar Flashlight is a Jet Propulsion Laboratory project, with NASA Marshall Space Flight Center (MSFC) serving as the principal investigator and providing the solar sail propulsion system. The goal of Lunar Flashlight is to determine the presence and abundance of exposed lunar water ice within permanently shadowed regions (PSRs) at the lunar south pole, and to map its concentration at the 1-2 kilometer scale to support future exploration and use. After being ejected in cis-lunar space by the launch vehicle, Lunar Flashlight deploys solar panels and an 85-square-meter solar sail and maneuvers into a low-energy transfer to lunar orbit. The solar sail and attitude control system work to bring the satellite into an elliptical polar orbit, spiraling down over a period of 18 months to a perilune of 30-10 kilometers above the south pole for data collection. Lunar Flashlight uses its solar sail to shine reflected sunlight onto the lunar surface, measuring surface reflectance with a four-filter point spectrometer. The spectrometer measures water ice absorption features (1.5, 1.95 microns) and the continuum between them (1.1, 1.9 microns). The ratios of water ice bands to the continuum will provide a measure of the abundance of surface frost and its variability across PSRs. Water ice abundance will be correlated with other data from previous missions, such as the Lunar Reconnaissance Orbiter and Lunar Crater Observation and Sensing Satellite, to provide future human and robotic explorers with a map of potential resources. The mission is enabled by the use of an 85-square-meter solar sail being developed by MSFC.

Baker, John↗

NASA NTRS2018

Sentinel-5P/TROPOMI and S-NPP/OMPS Data Support at GES DISC

The TROPspheric Monitoring Instrument (TROPOMI) on the Sentinel-5 Precursor (Sentinel-5P) is the first of the Atmospheric Composition Sentinels by the European Space Agency (ESA) that provides measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The early afternoon orbit of Sentinel-5P mission provides a strong synergy with the U.S. Suomi National Polar-orbiting Partnership (S-NPP) satellite, especially in that the S-NPP Ozone Monitoring and Profiling Suite (OMPS) facilitates high vertically resolved stratospheric and lower mesospheric ozone profiles. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) supports over a thousand data collections in the Focus Areas of Atmospheric Composition, Water & Energy Cycles, and Climate Variability and it is the Distributed Active Archive Center (DAAC) that is curating both offline Sentinel-5P TROPOMI and S-NPP OMPS Level-1B (L1B) and Level-2 (L2) products. Through its convenient and enhanced tools/services such as OPeNDAP and L2 Subsetting, GES DISC offers air quality remote sensing user communities facile solutions for complex Earth science data and applications. This presentation will demonstrate TROPOMI and OMPS products including earthview radiance, solar irradiance, and currently available L2 datasets, as well as easy ways to access, visualize and subset data. The implementation of the End User License Agreement (EULA) between NASA GES DISC and all data users accessing data at GES DISC will be emphasized as well.

TROPOMI↗

NASA NTRS1985

Automated testing of low-orbiting satellites

This paper describes the hardware, software, and test procedures implemented at a ground station for the automated testing of a polar-orbiting satellite in a low orbit. The satellite passes during the testing were characterized by short visibility times of no more than 18 min and by high rates of change of the link parameters as seen by the ground station. The advantages of automated testing became apparent for these dynamic conditions. Under computer control throughout the pass, programmable test instruments were commanded and data was collected and stored. Data reduction was performed after the pass.

Barbiere, D.↗

NASA NTRS2020

SNPP VIIRS RSB on-orbit radiometric calibration algorithms Version 2.0 and the performances. Part I: The algorithms

The first VIIRS instrument is aboard the Suomi National Polar-orbiting Partnership satellite. The instrument has 14 reflective solar bands (RSBs) to passively collect photons reflected from the Earth surface in the design wavelengths from 412 to 2250 nm. The instrument uses a solar diffuser (SD) to radiometrically calibrate its RSBs. When lit by the Sun through an attenuation screen (the SD screen), the SD diffusely reflects off the incident sunlight to act as a radiance source for the calibration. An onboard solar diffuser stability monitor (SDSM) yields the on-orbit change of the SD bidirectional reflectance distribution function (BRDF) by comparing the signal strength from the SD with that from the Sun attenuated by another attenuation screen (the SDSM screen). Complications arise due to the discovery that the on-orbit change of the BRDF is angle dependent. Additionally, the SDSM does not cover the wavelengths for the short-wave infrared bands in the RSBs. Furthermore, satellite yaw maneuvers were performed in the early mission to yield data for refining the prelaunch SDSM screen relative effective transmittance and the relative product of the SD screen transmittance and the BRDF at the mission start. But the yaw maneuver data are coarse in the solar azimuth angles and thus are unable to yield accurate values between the measurement angles. Over the years of performing on-orbit radiometric calibration through the SD for the VIIRSRSBs, we have developed several highly effective calibration algorithms to address the issues mentioned above. This paper reviews these algorithms.

on-orbit cailbration↗

NASA NTRS2020

SNPP VIIRS RSB on-orbit radiometric calibration algorithms Version 2.0 and the performances. Part I: The algorithms

Ning Lei↗

NASA NTRSDate not supplied

Applications of Nuclear Thermal Propulsion Systems for Deep Space Science Missions

Nuclear thermal propulsion (NTP) systems occupy a unique area in the space propulsion technology landscape due to their ability to combine moderate-to-high thrust systems normally seen in chemical propulsion systems with specific impulses that are closer to those observed in some electric propulsion systems. Consequently, NTP systems have the potential to greatly expand access to deep space and can enable a variety of missions that achieve the science goals outlined in NASA’s decadal surveys. This paper leverages previous analysis performed to show the applicability of NTP systems for notional science missions, expanding the analyzed portfolio to encompass additional science mission profiles and demonstrating how the use of NTP affects various mission parameters, such as trip time and delivered mass. This paper also outlines efforts to improve the fidelity of the existing NTP design concepts and vehicles that are utilized by leveraging previous work on nuclear propulsion systems for human-Mars missions. The fidelity of the analysis in this work is improved over previous studies, permitting commensurate improvements in the analyses of previous mission concept studies –the Triton lander, the solar polar orbiter, and the interstellar medium probe missions.

Nuclear thermal propulsion↗

NASA NTRS1981

The International Solar Polar Mission - United States and Europe plan for a new look at the sun

A three-dimensional polar orbit exploration of the sun and solar-related phenomena in the heliosphere through the International Solar Polar Mission (ISPM) is discussed. The characteristics of the out-of-the-ecliptic mission are mentioned and a detailed list of the scientific objectives is given: properties of the solar corona, the solar wind, the structure of the sun-wind interface, the heliospheric magnetic field, solar and non-solar cosmic rays, solar radio bursts and plasma waves, and the interstellar/interplanetary neutral gas and dust. Measurements of the Jovian magnetosphere during the Jupiter flyby phase and interplanetary physics investigations during the initial earth-Jupiter phase are pointed out as secondary objectives. The Nasa spacecraft with a sun-pointing despun platform on which the White Light Coronagraph/X-Ray and Extreme Ultraviolet Telescope (CXX), and the Mass Separating Ion Instrument are mounted, is detailed. The operational configuration of EASA, a spin stabilized spacecraft, is given and characteristics of special features such as the large paraboloidal high gain antenna, the radio-isotope thermoelectric generator, the radial boom and the central equipment compartment are described and shown in a diagram. The mission design and launch parameters block diagrams are given.

Purdy, W. I., Jr.↗

NASA NTRS1985

Interactions measurement payload for Shuttle

The Interactions Measurement Payload for Shuttle (IMPS) consisted of engineering experiments to determine the effects of the space environment on projected Air Force space systems. Measurements by IMPS on a polar-orbit Shuttle flight will lead to detailed knowledge of the interaction of the low-altitude polar-auroral environment on materials, equipment and technologies to be used in future large, high-power space systems. The results from the IMPS measurements will provide direct input to MIL-STD design guidelines and test standards that properly account for space-environment effects.

Guidice, D. A.↗

NASA NTRS1989

Influence of charging environments on spacecraft materials and system performance

An overview is presented of potential interactions that can occur on spacecraft operating in space environments. These interactions are discussed in detail. The environment acts on spacecraft in such a way that charging of exterior surfaces occurs. The consequences from this charging then affect system operational performance. Hence, it is the coupling of this exterior charging to system performance that is of concern here. These interactions were first discovered in the spacecraft charging phenomena in which the geomagnetic substorms charged external surfaces to a level that discharges occurred. As a result of the discharge, electronic systems either changed logic state (anomalous switching) or failed. These interactions can occur in all orbits. The type associated with geosynchronous orbits is called passive since the environment provides the charging mechanism. This type can also occur in polar orbits due to auroral charging environments. In low Earth orbits, the thermal plasma alleviates charging environment concerns, but system operations can induce similar effects.

Stevens, N. John↗

NASA NTRS1989

Mars Observer mission design

The spacecraft for the Mars Observer mission is described, and an interplanetary trajectory design maximizing the spacecraft dry mass delivered into its mapping orbit is presented, along with an orbit insertion strategy minimizing spacecraft propulsive requirements. Emphasis is placed on the mapping orbit designed to meet the science requirements for a low-altitude near-circular near-polar orbit which is sun-synchronous with the dayside equatorial crossing at 2 PM local mean solar time. Additional requirements on the design are that the mapping orbit have a repeating groundtrack of no more than 7 sols and comply with the NASA Planetary Protection requirements. It is planned to operate the spacecraft and instruments in a repetitive fashion to minimize mission operation complexity and cost.

Beerer, Joseph G.↗

NASA NTRS2004

Space Technology 5: Enabling Future Micro-Sat Constellation Science Missions

The Space Technology 5 (ST-5) Project is part of NASA s New Millennium Program. ST-5 will consist of a constellation of three micro-satellites, each approximately 25 kg in mass. The mission goals are to demonstrate the research-quality science capability of the ST-5 spacecraft; to operate the three spacecraft as a constellation; and to design, develop and flight-validate three capable micro-satellites with new technologies. ST-5 is designed to measurably raise the utility of small satellites by providing high functionality in a low mass, low power, and low volume package. The whole of ST-5 is greater than the sum of its parts: the collection of components into the ST-5 spacecraft allows it to perform the functionality of a larger scientific spacecraft on a micro-satellite platform. The ST-5 mission was originally designed to be launched as a secondary payload into a Geosynchronous Transfer Orbit (GTO). Recently, the mission has been replanned for a Pegasus XL dedicated launch into an elliptical polar orbit. A three-month flight demonstration phase, beginning in March 2006, will validate the ability to perform science measurements, as well as the technologies and constellation operations. ST- 5 s technologies and concepts will then be transferred to future micro-sat science missions.

Carlisle, Candace C.↗

NASA NTRS2004

Space Technology 5: Enabling Future Micro-Sat Constellation Science Missions

The Space Technology 5 (ST-5) Project is part of NASA s New Millennium Program. ST-5 will consist of a constellation of three micro-satellites, each approximately 25 kg in mass. The mission goals are to demonstrate the research-quality science capability of the ST-5 spacecraft, to operate the three spacecraft as a constellation; and to design, develop and flight-validate three capable micro-satellites with new technologies. ST-5 is designed to measurably raise the utility of small satellites by providing high functionality in a low mass, low power, and low volume package. The whole of ST-5 is greater than the sum of its parts: the collection of components into the ST-5 spacecraft allows it to perform the functionality of a larger scientific spacecraft on a micro-satellite platform. The ST-5 mission was originally designed to be launched as a secondary payload into a Geosynchronous Transfer Orbit (GTO). Recently, the mission has been replanned for a Pegasus XL dedicated launch into an elliptical polar orbit. A three-month flight demonstration phase, beginning in March 2006, will validate the ability to perform science measurements, as well as the technologies and constellation operations. ST- 5 s technologies and concepts will then be transferred to future micro-sat science missions.

Carlisle, Candace C.↗