SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using semiclassical Coulomb excitation theory, proton collisional excitation and deexcitation cross sections are calculated for all transitions between the Fe(+12) ground configuration levels. Rate constants pertaining to these processes are then derived for coronal temperatures. These rates are shown to be comparable in all cases to the corresponding electron rate constants.
The Apollo 11 high-K basalt samples are classified into three textural categories: vitrophyric, anti-insertal, and antiophitic. Low-pressure phase equilibrium experiments and cooling rate studies were performed on a synthetic analog of 10085, 832. The dynamic crystallization experiments were designed to study textural development with: (1) a variable cooling rate from a constant initial temperature above the liquidus, and (2) cooling at a constant rate from variable initial temperatures below the liquidus. These experiments show that a variety of cooling rates initiated from temperatures both below and above the liquidus can produce all the observed textures. The results are consistent with the interpretation that all of the high-K basalt samples were derived from a single lava flow or lava lake.
The reaction of hydrogen (H) atoms with butadiene (C4H2) was studied at room temperature in a pressure range between w mbar and 10 mbar. The primary step was an addition of H to C4H2 which is in its high pressure range at p 1 mbar. Under these conditions the following addition of a second H atom lies in the transition region between low and high pressure range. Vibrationally excited C4H4 can be deactivated to form buten-(1)-yne-(3)(C4H4) or decomposes into two C2H2 molecules. The rate constant at room temperature for primary step is given. The second order rate constant for the consumption of buten-(1)-yne-(3) is an H atom excess at room temperature is given.
To support technology development for future long-term missions, a metabolic simulator will be used in a closed chamber to test the functions of a Controlled Ecological Life Support System (CELSS). Methyl acetate (MA) was selected as the fuel because its metabolic respiratory quotient is near that of humans. A kinetic study of the catalytic oxidation of MA over Pt/Al203 was then conducted to support the design and operation of the simulator. Kinetic data were obtained as a conversion percentage of MA versus retention time. The reaction was studied at one atmosphere and temperatures from 220 to 340 deg. C. The inlet MA concentration was varied from 100 to 2000 ppm with retention times from 0.01 to 10 sec. A first-order rate law and a Langmuir-Hinshelwood rate equation were tested by nonlinear regression of the kinetic data to estimate rate constants in the rate law. Regression results of the L-H equation explain the kinetic data better than the results of the first-order rate law. A Taguchi experimental design was used to study the effects of temperature, retention time, and concentrations of MA, CO2, and O2 on the conversion of MA. Results indicate that temperature has greatest effect, followed by retention time, and finally MA concentration. It was further determined that the effects of CO2 and O2 concentrations, and the cross effects, are negligible.
The temperature dependence of the bimolecular reactions of Cl(+), HCl(+), CH(+), CH2(+), N(+), NH(+), and NH2(+) reacting with H2 have been investigated. For Cl(+) and HCl(+) rate constants have been determined over the temperature range of 150 to 400 K. Preliminary data have been obtained for the other systems. The Cl(+)/H2 system shows a weak, but significant positive temperature dependence that could be important in interstellar modeling studies. The HCl(+)/H2 system shows a substantial negative temperature dependence with the rate constant approaching the collision rate at low temperatures. The association reaction CH3(+) + HCN yields CH3 HCN(+) has been theoretically modeled using statistical phase space theory. Both radiative and collisional stabilization have been included. The results are compared with experiment with good agreement obtained over wide variations in T and p. This system is potentially important in the mechanism of large molecule synthesis in interstellar space.
Secondary organic aerosol (SOA) from acid-driven reactive uptake of isoprene epoxydiols (IEPOX) contributes up to 40% of organic aerosol (OA) mass in fine particulate matter. Our previous work showed substantial conversions of particulate inorganic sulfates to surface-active organosulfates (OSs) by IEPOX decreases aerosol acidity and creates a viscous organic-rich shell that poses as a diffusion barrier, inhibiting additional reactive uptake of IEPOX. In this study, to account for this “self-limiting” effect, a phase-separation box model was developed to evaluate parameterizations of IEPOX reactive uptake against time-resolved chamber measurements of IEPOX-SOA tracers, including 2-methyltetrols (2-MT) and methyltetrol sulfates (MTS), at ~ 50% relative humidity. The phase-separation model was most sensitive to mass accommodation coefficient, IEPOX diffusivity in the organic shell, and ratio of the third-order reaction rate constants forming 2-MT and MTS (k MT /k MTS ). In particular, k MT /k MTS had to be lower than 0.1 to bring model predictions of 2-MT and MTS in closer agreement with chamber measurements, while prior studies reported values larger than 0.71. The model-derived rate constants favor more particulate MTS formation due to 2-MT likely off-gassing at ambient-relevant OA loadings. Incorporating this parametrization into chemical transport models is expected to predict lower IEPOX-SOA mass and volatility due to the predominance of OSs.
Insufficient durability of commercial catalysts is a persistent issue for PEFC applications.1 Herein, Pt on Nb-doped-TiO 2 is reported as a highly durable electrocatalyst on which the direct 4-electron reduction of oxygen to water is more facile compared to Pt/C. All performance metrics are reported comparing Pt/Nb-TiO2 with a 15% Pt loading, against a commercial Pt/C catalyst (46.5% Pt loading, Tanaka, K. K.). Nb-doped-TiO 2 with high surface area and high electronic conductivity was synthesized using the supercritical fluid method. Initially, the durability of the catalyst was characterized using accelerated stability tests (ASTs) involving 10,000 high potential cycles (DOE/FCCJ protocol) and the Pt/Nb-TiO 2 was found to retain 78% of its initial electrochemically active surface area (ECSA) compared to the 57.6 % retained by Pt/C. These observations were in excellent agreement with previous reports that the Pt particle size of Pt/C grew from 2nm to 8nm during the AST protocol along with severe corrosion and amorphization of the carbon surface.2, 3 TEM and XPS studies of the Pt-Nb-doped-TiO 2 catalyst showed that the Pt particle size grew from 3nm to 6nm and the Nb(IV) and Ti(III) in the support were oxidized to Nb(V) and Ti(IV) after the durability test. Thus, the improvement in Pt/Nb-TiO 2 ECSA retention was attributed to the lower extent of particle growth and lack of oxidative support loss upon oxidation as compared to Pt/C. The oxygen reduction reaction (ORR) performance was characterized by linear polarization using a rotating disk electrode (RDE). The electrochemical surface areas of Pt/Nb-TiO 2 and Pt/C were found to be 48m2·g -1 and 83m2·g -1 respectively, and the mass activity for the ORR at 0.9V vs. RHE were found to be 150 mA·mg-1Pt and 124 mA·mg-1Pt respectively. The improved mass activity on Pt/Nb-TiO 2 was attributed to strong metal support interaction (SMSI) between the Nb-TiO 2 support and the Pt catalyst based on the 625 meV decrease in the binding energy of the Pt4f x-ray photo-electron spectroscopy (XPS) peaks of Pt/Nb-TiO 2 compared to Pt/C. To quantify the impact of the SMSI, a kinetic model was applied to calculate the elementary reaction rate constants for the various steps of the ORR on both catalysts. The reaction rate constant (k1) for the direct 4-electron transfer pathway to produce H 2 O was significantly larger in Pt/Nb-TiO 2 as compared to Pt/C. Thus, the reduction in the electron binding energy as observed in the XPS was found to aid the facile filling of the higher energy 2p orbitals of O 2 thereby leading to improved 4-electron transfer kinetics and improved overall activity.
Electron attachment cross sections are reported in the electron energy range 0-160 meV and at energy resolutions of 4.5-7.5 meV (FWHM) for the molecules c-C6F10 (perfluorocyclohexene), c-C6F12 (perfluoro-1,2-dimethylcyclobutane), C8F16 (perfluoro-1,3-dimethylcyclohexane) and 1,1,2-C2Cl3F3 (1,1,2-trichlorotrifluoroethane). Use is made of the Kr photoionization technique, and measured attachment lineshapes are converted to cross sections by normalization through attachment rate constants. Comparisons are made with attachment cross sections derived from swarm-measured rate constants. Similar to previous results in eight other molecules, the present four molecules exhibit resolution-limited onsets at a threshold consistent with an s-wave attachment behavior and with a neutral-negative-ion curve crossing at zero energy.
The present 1000 C and 1300 C oxidation tests on 111-oriented single-crystal Si and dense CVD Si3N4 notes the oxidation rates of the latter in wet O2, dry O2, wet inert gas, and steam atmosphere conditions to be several orders of magnitude lower than the rates for the former in identical atmospheric conditions. Although the parabolic rate constant for Si increased linearly as the water vapor pressure increased, the parabolic rate constant for Si3N4 exhibited a nonlinear dependency on water vapor pressure in the presence of O2. NO and NH3 formation at the reaction interface of Si3N4, and the counterpermeation of these reaction products, are noted to dominate reaction kinetics.
In this work, spectra of the dimer cations naphthalene (Nap 2 •+ ) and ethene (Ethene 2 •+ ) were measured in liquid dichloromethane (DCM). The spectra peak at very different energies, 1.2 and 3.3 eV. In DCM dimerization stabilizes Nap 2 •+ by Δ$G_\text{d}°$(Nap 2 •+ ) = -218 meV relative to the monomer Nap •+ as determined from the dimerization equilibrium constant. Both dimers can transfer a positive charge to hole acceptor molecules, but for both the rate constants rise more gradually with reaction energetics than do many charge transfer reactions previously studied. A striking observation finds that the rate constant for hole transfer from the Nap 2 •+ dimer to phenanthrene is smaller by two decades than that from biphenyl•+ monomer to Nap, although both reactions have the same –Δ$\textit{G}°$=0.05 eV. A plausible interpretation for these observations is the presence of an energy of reorganization, λ(M 2 ), for the dimer that involves movement apart of the two partners in the dimer. While the dimerization equilibrium cannot be measured for Ethene 2 •+ the charge transfer data imply that both Δ$G_\text{d}°$(Ethene 2 •+ ) and λ(Ethene 2 •+ ), are considerably larger, perhaps by factors of 2-4 than for Nap 2 •+ .
The Laurentide Ice Sheet (LIS) was the largest ice sheet during the last glacial period. An accurate representation of its behavior during the last deglaciation is critical to understanding its influence on and response to a changing climate. Here we use 10 Be dating and Bayesian modeling to track the recession of the southwest sector of the Labrador Dome of the LIS along an ~500-km-long transect west of Lake Superior during the last deglaciation. This transect reflects terrestrial ice-margin retreat and crosses multiple moraine sets, with the southwestern part of the transect deglaciated by ca. 19 ka and the northeastern part deglaciated by ca. 10 ka. The predominant behavior of the ice margin during this interval is near-constant retreat with retreat rates varying between ~59 m/a and 38 m/a. The moraine sets mark standstills and/or readvances that in total constitute only ~17% of the retreat interval. The spatial and temporal pattern of ice-margin retreat tracked here differs from existing reconstructions that are based on using isochrons to define ice-margin positions. Acknowledging the uncertainties associated with the modeled ages of ice-margin retreat, we suggest that the overall retreat pattern is consistent with forcing by a gradual increase in Northern Hemisphere, high-latitude summer insolation. The pattern of ice-margin retreat is inconsistent with Greenland ice-core temperature records, and thus these records may not be suitable to drive models of the LIS.
Hydrated electrons are created in virtually every radiation environment and in many photochemical or electrochemical environments where liquid water is present, so their reaction products and reaction rate constants are naturally important in applications. Thanks to the strong optical absorbance of (e - ) aq , these rate constants are easy to measure, and a large database has been accumulated. It is not generally appreciated that no working theory of hydrated electron reaction rates presently exists. We discuss key experimental observations of hydrated electron reactions in the context of recent progress in theoretical and simulation developments toward understanding them, made possible by ever increasing computational power.
Quantitative descriptions of non-adiabatic transition rates at intermediate temperatures are challenging due to the simultaneous importance of quantum and anharmonic effects. Here, in this paper, the interplay between quantum effects—for motion across or along the seam of crossing—and anharmonicity in the seam potential is considered within the weak coupling limit. The well-known expression for quantized 1-D motion across the seam (i.e., tunneling) in the linear terms approximation is derived in the thermal domain using the Lagrangian formalism, which is then applied to the case when tunneling is distributed along the seam of crossing (treating motion along the seam classically). For high-frequency quantum modes, a vibrationally adiabatic (VA) approach is developed that introduces to the non-adiabatic rate constant a factor associated with high-frequency wavefunction overlap; this approach treats the high-frequency motion along the seam quantum mechanically. To test these methodologies, the reaction N 2 O ↔ N 2 + O( 3 P) was chosen. CCSD(T)-F12b/cc-pVTZ-F12 explorations of the 3 A'- 1 A' seam of N 2 O revealed that seam anharmonicity has a strong effect on the rate constant (a factor of ~20 at 2000 K). Several quantum effects were found to be significant at intermediate/lower temperatures, including the quantum N–N vibration that was coupled with seam anharmonicity using the VA approach. Finally, a 1-D approximation to non-adiabatic instanton theory is presented to estimate the validity limit of the linear terms model at low temperatures (~ 250 K for N 2 O). We recommend that the assumptions built into many statistical theories for non-adiabatic reactions—harmonic behavior, classical motion, linear terms, and weak coupling—should be verified on a case-by-case basis.
Here, high pressure ammonia/methanol oxidation and NOx formations were investigated using a recently developed supercritical pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm with temperatures between 550 and 950 K and equivalence ratios of 0.138 and 1.15. The experimental results show that NH 3 oxidation at high pressure is significantly accelerated by the active OH radicals produced from CH 3 OH oxidation. Furthermore, the kinetic interactions between NH 3 and CH 3 OH are governed mainly by the reactions CH 3 OH + NH 2 = CH 2 OH + NH 3 , CH 3 OH + NH 2 = CH 3 O + NH 3 , and CH 2 O + NH 2 = HCO + NH 3 . A HP-Mech model for high-pressure NH 3 /CH 3 OH oxidation was developed in this study. It consists of the most recent NH 3 and CH 3 OH models including some new reactions and updated rate constants from the literature as well as NH 3 -CH 3 OH interactions where rate constants of CH 3 OH + NH 2 = CH 2 OH + NH 3 , CH 3 OH + NH 2 = CH 3 O + NH 3 , NH 2 + CH 2 O = NH 3 + HCO, and NH 2 + CH 2 O = NH 2 CHO + H were theoretically calculated in this study. Our model with these updates improves the prediction for the measured N 2 O/NO x temperature dependence at 100 atm. In addition, the reaction pathway and sensitivity analysis show that N 2 O/NO x /HONO interactions with HO 2 are very important, especially for a fuel-lean mixture at 100 atm. The HONO mole fraction for the fuel-lean mixture at 100 atm was then measured by off-axis integrated cavity output spectroscopy (ICOS) at wavenumber of 6638.26 cm -1 . The experimental data show a significant HONO formation at intermediate temperature that is strongly underpredicted by numerical simulation at 100 atm. Therefore, the HONO related reactions with notable uncertainty at high pressure such as NO + OH (+M) = HONO (+M) and H 2 NO + NO 2 = HONO + HNO need deeper exploration in the future.
Improved values of the proton impact excitation cross sections at coronal energies for all the Fe(+12) ground configuration transitions are presented. These were obtained by direct computer integration of the Schroedinger equation (with the states expressed in intermediate coupling) resulting from the semiclassical Coulomb excitation theory formulation of the process. Comparison is made with previous results. The associated rate constants at coronal temperatures are given and compared with the corresponding electron impact excitation rate constants.
This paper presents kinetic data from oxidation studies of the polar faces for 3C and 6H SiC in wet and dry oxidizing ambients. Values for the linear and parabolic rate constants were obtained, as well as preliminary results for the activation energies of the rate constants. Examples are presented describing how thermal oxidation can be used to map polytypes and characterize defects in epitaxial layers grown on low tilt angle 6H SiC substrates. Interface widths were measured using Auger electron spectroscopy (AES) with Ar ion beam depth profiling and variable angle spectroscopic ellipsometry (VASE) with effective medium approximation (EMA) models. Preliminary electrical measurements of MOS capacitors are also presented.
The collisional removal Of 02 molecules in selected vibrational levels of the c state is studied using a two-laser double-resonance technique. The output of the first laser excites the 02 to nu = 9 or 10 of the c Sigma - state, and the ultraviolet output of the second laser monitors specific rovibrational levels via resonance-enhanced ionization. The temporal evolution of the c Sigma u state vibrational level is observed by scanning the time delay between the two pulsed lasers. As the rate constants for 02 and N2 are similar in magnitude, N2 collisions dominate the removal rate in the earth's atmosphere. For v= 10 colliding with 02, we find a removal rate constant that is 2-5 times that for v=9 and that single quantum collision cascade is an important pathway for removal.
The rate constant and branching ratios of ethyl reaction with hydroperoxyl radical, C 2 H 5 + HO 2 (1), a key radical-radical reaction for intermediate temperature combustion chemistry, were measured in situ for the first time in a photolysis Herriott cell by using mid-IR Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS). The microsecond time-resolved diagnostic technique in this work enabled the direct rate measurements of the target reaction at 40 and 80 mbar and reduced the experimental uncertainty considerably. C 2 H 5 and HO 2 radicals were generated by the photolysis of (COCl) 2 /C 2 H 5 I/CH 3 OH/O 2 /He mixture at 266 nm. By direct measurements of the transient profiles of C 2 H 5 , HO 2 and OH concentrations, the overall rate constant for this reaction at 297 K was determined as k 1 (40 mbar) = (3.8 ± 0.8) × 10 –11 cm 3 molecule –1 s –1 and k 1 (80 mbar) = (4.1 ± 1.0) × 10 –11 cm 3 molecule –1 s –1 . As a result, the direct observation of hydroxyl radical (OH) indicated that OH formation channel was the major channel with a branching ratio of 0.8 ± 0.1.