Search NASA⌕ Search

SEARCH · Search NASA

Results for “relay orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

15 GHz space VLBI observations using an antenna on a TDRSS satellite

A 4.9 m diameter antenna in earth orbit, part of the Tracking and Data Relay Satellite System, was previously used for space VLBI observations at 2.3 GHz. It has now been used successfully with two ground antennas for VLBI measurements at 15 GHz. Although the sensitivity (gain/system temperature) of the orbiting antenna was a factor of 6 poorer at 15 GHz than at 2.3 GHz, 11 out of 22 extragalactic sources were detected on space-ground baselines, up to a maximum baseline of 1.63 earth diameters. The results suggest that the distribution of source visibilities at 15 and 2.3 GHz are similar for these baseline lengths. Model-dependent brightness temperatures of 1-2.5 x 10 to the 12th K were derived for six sources. This suggests that sources with brightness temperatures in this range are as common at 15 GHz as at 2.3 GHz. The coherence on space-ground baselines (this includes effects due to the phase transfer from the ground to the satellite and the reconstruction of the spacecraft orbit) was 0.76 for 340 s integrations.

Linfield, R. P.↗

The NASA Tracking and Data Relay Satellite System and its impact on spacecraft support in the space transportation system era

The space tracking, data acquisition and communication network systems and capabilities available to NASA are discussed, with emphasis on the Tracking and Data Relay Satellite System (TDRSS). Scheduled to come into operation in 1983, TDRSS will be the prime support system for communication with the Space Shuttle, Spacelab, and the automated spacecraft to be launched into earth orbit by the Space Transportation System. TDRSS will consist of two specialized data relay satellites in geosynchronous orbit, about 130 deg apart; each TDRSS spacecraft has a three-axis stabilized configuration, with sun-oriented solar panels, and will weigh about 2200 kg at launch. The NASA Spaceflight Tracking and Data Network, currently used to support 30-40 spacecraft per day, is described, and plans for changes in the network are discussed. The 26 antennas of the network will be consolidated into an expanded Deep Space Network, after TDRSS is in operation.

Smylie, R. E.↗

Spacecraft environmental testing

Physical testing of Relay I satellite to approximate environment and stress during handling, launch, and orbital flight

RELAY I SATELLITE↗

Telecommunications Relay Support of the Mars Phoenix Lander Mission

The Phoenix Lander, first of NASA's Mars Scout missions, arrived at the Red Planet on May 25, 2008. From the moment the lander separated from its interplanetary cruise stage shortly before entry, the spacecraft could no longer communicate directly with Earth, and was instead entirely dependent on UHF relay communications via an international network of orbiting Mars spacecraft, including NASA's 2001 Mars Odyssey (ODY) and Mars Reconnaissance Orbiter (MRO) spacecraft, as well as ESA's Mars Express (MEX) spacecraft. All three orbiters captured critical event telemetry and/or tracking data during Phoenix Entry, Descent and Landing. During the Phoenix surface mission, ODY and MRO provided command and telemetry services, far surpassing the original data return requirements. The availability of MEX as a backup relay asset enhanced the robustness of the surface relay plan. In addition to telecommunications services, Doppler tracking observables acquired on the UHF link yielded an accurate position for the Phoenix landing site.

Edwards, Charles D., Jr.↗

Computing and data transmission for the prediction steering of the Goonhilly satellite-communication aerial

The Goonhilly satellite-communication aerial uses an 85-ft. diameter paraboloidal reflector with waveguide feed at the focus. The aerial is movable in azimuth and elevation, and is provided with independent feedback control systems for these two motions. During a satellite pass, the aerial must be steered so that its axis points continuously, and with high accuracy, in the direction of the satellite. Of the various possible methods of achieving this result, that based on prediction of satellite position has been adopted for the first transatlantic communication experiments using the Telstar and Relay satellites. The process by which orbital predictions originating in the USA are converted to substantially continuous real-time azimuth and elevation pointing instructions at Goonhilly is described herein.

GROUND STATION↗

STADAN and data relay satellite simulation (emphasis on the scheduler)

A set of computer programs was developed which can be used to simulate the operation of NASA's Satellite Tracking and Data Acquisition Network (STADAN). The simulation consists of two major modules, a computerized algorithmic satellite scheduler (CASS) and a generalized evaluation model simulator (GEMS). CASS generates in-view time intervals of satellites over ground stations, and using these candidate passes, produces a schedule of service times for specific satellites to be serviced by specific ground stations in an attempt to fulfill certain inputted service requirements. GEMS than examines how well STADAN fulfills this schedule in terms of the availability and dependability of different (inputted) complements of equipment at the ground stations. The simulation was modified to allow for the introduction of one or more tracking and data relay satellites, which can serve as orbital receiving and command stations.

Kerne, B.↗

Multipath signal model development

The development and use of mathematical models of signals received through the multipath environmental of a TDRS-to-user spacecraft link and vice versa are discussed. The TDRS (tracking and data relay satellite) will be in synchronous orbit. The user spacecraft will be in a low altitude orbit between 200 and 4000 km.

Ghais, A. F.↗

Preliminary analysis of ERTS-relayed water resources data in the Delaware River Basin

Preliminary analysis of ERTS-DCS data from water-resources stations in the Delaware River Basin indicates that the Data-Collection System is performing well. Data-Collections Platforms have been successfully interfaced with five stream-gaging station and three ground-water observation wells and are being interfaced with 12 water-quality monitors in the basin. Data are being relayed during four or five ERTS orbital passes per day, which is within the design specifications of the ERTS-DCS.

Paulson, R. W.↗

Space Shuttle antenna subsystem design

The unique nature of the Shuttle Orbiter is that all of its systems must meet the design requirements of a spacecraft as well as the basic aircraft requirements for atmospheric flight. The Shuttle antenna system design, therefore, faces many unique problems. Some of the most significant of these problems include the interface with the Shuttle thermal protection system, the wide range of thermal extremes and rates to be encountered, the long life requirement, and the need for lightning protection. In addition, the radiation coverage requirements of some of the Orbiter antennas are complicated by the multiple requirement for operation during launch, from earth orbit to both ground station and relay satellites, and to the landing area during atmospheric flight. The unique engineering problems that result from these requirements will be described along with techniques that are planned for their solution.

Ellis, H.↗

Convolutional coding at 50 Mbps for the Shuttle Ku-band return link

Error correcting coding is required for 50 Mbps data link from the Shuttle Orbiter through the Tracking and Data Relay Satellite System (TDRSS) to the ground because of severe power limitations. Convolutional coding has been chosen because the decoding algorithms (sequential and Viterbi) provide significant coding gains at the required bit error probability of one in 10 to the sixth power and can be implemented at 50 Mbps with moderate hardware. While a 50 Mbps sequential decoder has been built, the highest data rate achieved for a Viterbi decoder is 10 Mbps. Thus, five multiplexed 10 Mbps Viterbi decoders must be used to provide a 50 Mbps data rate. This paper discusses the tradeoffs which were considered when selecting the multiplexed Viterbi decoder approach for this application.

Batson, B. H.↗

Retransmission of hydrometric data in Canada

The author has identified the following significant results. The LANDSAT program has demonstrated that polar orbiting satellites can be used to relay hydrologic data from any part of Canada to a user without difficulty and at low cost. These data can be used for many operational purposes, the most important of which were identified as follows: hydroelectric power plant operation; water supply for municipalities, industries, and irrigation; navigation; flood forecasting; operation of flood control structures and systems; and recreation.

Halliday, R. A.↗

Experiments in data collection technology using satellites

A variety of techniques potentially useful to data collection have been tested. An automatic data collection platform with a minicomputer collects and preprocesses data, then sends desired information when interrogated through a communication satellite. Position surveillance by tone-code ranging through communication satellites is automatic, real time and accurate. Emergency medical data transmissions from ambulances to hospitals can be extended to rural and remote areas by direct satellite links. A small platform can send emergency-related data through a satellite while the satellite is routinely relaying powerful communication signals. A low orbit satellite provides means to locate existing emergency locator beacons.

Anderson, R. E.↗

Potential problems relative to TDRS/IUS tilt table elevation with failed VRCS

Operational concerns and preliminary solution alternatives related to elevating the inertial upper stage/tracking and data relay satellite (IUS/TDRS) with a failed orbiter vernier reaction control system (VRCS) are presented. Problems arise from the combination of TDRS thermal constraints and tilt table constraints (the primary reaction control system (PRCS) cannot be used to hold attitude while the tilt table is being elevated), and the problems are compounded by the minimum PRCS attitude deadband. The potential solution options are affected by the launch window, flight profile, crew procedures, vehicle capability and constraints, and flight rules.

Bell, J.↗

The electronic switching spherical array antenna for the Earth Radiation Budget Spacecraft

The ESSA is a microprocessor-controlled antenna for low orbiting spacecraft for telemetry and command relay through the Tracking and Data Relay Satellite System (TDRSS). The array is a hemispherical shape covered with disk radiating elements. A group of radiating elements are continuously selected by the microprocessor controller to form a beam in the direction of a TDRS. A radial switching power divider uses PIN diodes to select the desired radiating elements. The antenna gain is a function of the size of the hemispherical dome. A 30-inch diameter dome is presently being built for the Earth Radiation Budget Spacecraft (ERBS). Gain of this antenna over a hemisphere is 14 dBi and polarization is lefthand circular. There are 145 radiating elements with 12 being used at one time to form a beam. The ESSA subsystem weights 74 pounds and power consumption is 20 watts. RF power handling capability is 30 watts. The S-Band radiating elements have a 10 percent bandwidth that allows simultaneous transmission and reception.

Kudrna, K.↗

VLBI System for Satellite Navigation

Report discusses proposed low cost very-long-baseline interferometric (VLBI) system for use with Tracking and Data Relay Satellite System (TDRSS) in determining orbits of user satellites. Theoretical accuracies of orbits to be measured by new system compared with similar orbital determinations by other satellite-navigation system, based on anticipated state of VLBI art in year 1990.

Ellis, J. M.↗

The Gamma-Ray Observatory: An overview

The Gamma-Ray Observatory (GRO) is a 16,000 kg spacecraft containing four instruments which span almost six decades of energy from about 50 keV to about 30 GeV. It will provide the first opportunity to make simultaneous observations over such a broad band of gamma-ray energies. GRO is assembled and undergoing testing prior to its scheduled June 4, 1990 launch aboard the Space Shuttle. The orbit will be circular with an altitude of 450 km and with an inclination of 28 degrees. Data will be recorded at 32 kilobits per second and dumped once per orbit via the Tracking and Data Relay Satellite System (TDRSS). The spacecraft is three-axis stabilized and timing will be maintained to .1 ms. The observing schedule will begin with an all sky survey, consisting of 30 two week pointings, covering the first 15 months of science operations. Following observations will emphasize source studies and deep searches. Originally selected as a Principal Class spacecraft with a two year mission, extension of the mission to six to ten years makes a vigorous Guest Investigator Program both possible and desirable. Such a program will be fully in place by the third year of the mission, with limited opportunities earlier. Each of the four instruments has a capability for observing both gamma-ray bursts and solar flare gamma-rays, and there is some solar neutron capability. Correlated observations with those at other wavelengths is also receiving considerable attention in the mission planning.

Kniffen, Donald A.↗

Project Longshot

Project Longshot is an unmanned probe to our nearest star system, Alpha Centauri, 4.3 light years away. The Centauri system is a trinary system consisting of two central stars (A and B) orbiting a barycenter, and a third (Proxima Centauri) orbiting the two. The system is a declination of -67 degrees. The goal is to reach the Centauri system in 50 years. This time space was chosen because any shorter time would be impossible of the relativistic velocities involved, and any greater time would be impossible because of the difficulty of creating a spacecraft with such a long lifetime. Therefore, the following mission profile is proposed: (1) spacecraft is assembled in Earth orbit; (2) spacecraft escapes Earth and Sun in the ecliptic with a single impulse maneuver; (3) spacecraft changed declination to point toward Centauri system; (4) spacecraft accelerates to 0.1c; (5) spacecraft coasts at 0.1c for 41 years; (6) spacecraft decelerates upon reaching Centauri system; and (7) spacecraft orbits Centauri system, conducts investigations, and relays data to Earth. The total time to reach the Centauri system, taking into consideration acceleration and deceleration, will be approximately 50 years.

West, J. Curtis↗