Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample thickness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Optimization of Structurally Enhanced Solder Transient Liquid Phase Bonding

High temperature packaging technologies are a necessity for high temperature capable devices. SAC305 solder has an operational limit of 174°C imposed by creep effects which aligns well with current junction temperature limits of 175°C. Wide band gap semiconductor materials have the potential to reach junction temperatures of up to 800°C that are not currently attainable with significant reliability. Capitalizing on this potential will requires substrates and attachments that can operate well beyond the current 175°C standard. Silver sintering pastes have received widespread interest as a high temperature attachment alternative. However, the process requires high pressure bonding in an inert environment to achieve acceptable bond quality. Transient liquid phase (TLP) sintering is capable of good bond quality without pressure requirements but suffers from low thermal conductivity and only slightly reduced cost compared to silver sintering. SAC305 solder contains the same constituent materials for TLP as available copper-tin TLP sintering paste. By introducing engineered surface structures into the bond, intermetallic formation can be accelerated producing a bond similar to TLP sintering but in an ambient environment and for reduced cost. While this process has been demonstrated, it has not yet been optimized. Currently bonds are formed using a 75 μm stencil on substrate surface structures 24 μm tall, covering 19% of the bonding area. The process takes about 4 hours not including the formation of surface structures. Here, this study will center on the effects of stencil thickness and coating methods. Samples will be analyzed by scanning acoustic microscopy, die shear testing and cross sectional scanning acoustic microscopy.

42 ENGINEERING↗

Morphological and molecular characterization of a Sarcocystis bovifelis-like sarcocyst in American beef

Abstract Background Parasites in the apicomplexan genusSarcocystisinfect cattle worldwide. Assessing the economic importance of each such parasite species requires proper diagnosis.Sarcocystiscruzi,a thin-walled species, infects virtually all cattle. The prevalence of the other thin-walled parasite,Sarcocystisheydorni, remains less well established. The remaining six species all have thick (> 3 µm) cyst walls (Sarcocystishirsuta,S.hominis,S.bovifelis,S.bovini,S.sigmoideus, andS.rommeli). Thick-walled sarcocysts often induce inflammation in striated muscles (causing bovine eosinophilic myositis), leading to condemnation of carcasses at slaughter. One of these,S.hirsuta, can be seen macroscopically and lead to condemnation of beef. TwoSarcocystisspecies,S.hominisandS.heydorni, are zoonotic. AlthoughS.hominishas been reported as prevalent in Europe, the occurrence of thick-walled species in the US remains poorly known. Here, for the first time to our knowldge, we characterize a thick-walledSarcocystisspecies from a sample of beef from a local grocery store in Maryland. By morphological and genetic criteria, it closely, but not perfectly, resembles parasites previously ascribed toS.bovifelis. Methods Beef samples were examined forSarcocystisinfection, using acid-pepsin digestion to search for bradyzoites, microscopically by compression between a glass slide and coverslip, by histology of paraffin embedded sections stained with hematoxylin and eosin, and by transmission electron microscopy (TEM). Molecular characterization was attempted employing genetic markers:18SrRNA,28SrRNA,cox1,ITS1,gapdh1,ron3, andrpoB. Results Molecular evaluation revealed 100% identity withS.bovifelis-like sarcocysts from naturally infected cattle from Germany and Argentina; although the condition of the frozen material precludes complete characterization by TEM, we noted morphological features which differed from theS.bovifelisoriginally described from experimentally infected cattle from Germany. Conclusions A novelSarcocystisspecies is described from beef from the USA but not named until further evaluation. Graphical Abstract

Parasitology↗

Growth of Native Oxides of Niobium Thin Films

Both XPS and ToF-SIMS data and analysis suggest that Nb oxides grow rapidly and overwhelm Nb metal within the first 24 hours following a logarithmic growth. Nb2O5 growth is dominant out of all types of Nb oxide with reaching 80% At conc within 80 days. NbO2 is quickly saturated, maintaining 10% At conc over time with a logarithmic growth. NbO on the opposite follows an exponential decay. Oxide thickness growth also implies sample preparation techniques impact oxide saturation and growth rate.

Lei, Zhicheng↗

Estimating the Ages of FGK Dwarf Stars through the Use of GALEX FUV Magnitudes

Stellar age cannot be directly measured, yet age determinations are fundamental to understanding the evolution of stars, planets, and galaxies. The work presented here builds upon the idea of a stellar-activity age. We utilized far-ultraviolet (FUV) photometry acquired by the Galaxy Evolution Explorer (GALEX) space telescope as an indicator of chromospheric activity to infer ages of late-F, G, and K type dwarf stars. We derived a purely empirical correlation between FUV magnitudes and stellar age in conjunction with (B − V) color. Our attention is restricted to Sun-like stars with color range 0.55⩽(B−V)⩽0.71 and absolute magnitude range 4.3 ≤ M {sub V} ≤ 5.3. The correlation is defined in terms of a FUV-excess parameter Q(FUV−B,B−V). We related stellar age, τ, to Q through the relation log{sub e}(τ)=log{sub e}(a)+bQ, where a and b are fit parameters and functions of (B − V). This correlation is functional up to 6 Gyr for FGK dwarfs. With such a correlation, one only needs Johnson (B − V) and FUV measurements to estimate the stellar age for Population i dwarf stars of solar-like temperature and metallicity. Such a calibration has utility in population studies of FGK dwarfs for further understanding of the chemical evolution of the Milky Way. As an illustration of one such application, we have constructed activity and FUV–age distributions for a sample of thin and thick disk stars, as distinguished by their chemical abundances. Considerable overlap is found between the activity distribution and age range of the two populations. We discuss the possibility that some high-[α/Fe] thick disk stars were formed as a result of the accretion of dwarf galaxies as recently as 4 Gyr ago.

79 ASTRONOMY AND ASTROPHYSICS↗

Disentangling High Harmonic Generation from Surface and Bulk States of a Topological Insulator

The discovery of topological phases has introduced a new dimension to materials science. Three-dimensional (3D) topological insulators (TIs) are a remarkable class of matter that is insulating in the bulk while hosting conductive topological surface states (TSSs) with unique charge and spin properties. High-order harmonic generation (HHG) has emerged as a powerful tool to probe condensed matter systems by providing insights into their electronic structure and dynamic behavior. Here, we investigate HHG in the prototype 3D-TI Bi$_2$Se$_3$. We demonstrate that the contributions of bulk and surface states to the harmonic emission can be controlled by tuning the thickness of thin film samples. An ultrathin (6 nm) film substantially enhances HHG from the surface states, while the bulk states dominate HHG in a thicker (50 nm) film. By applying a quasi-static terahertz perturbing field, we disentangle the bulk and surface responses and reveal the significant impact of the surface states' shift vector and Berry curvature on HHG. Our study provides effective methods for isolating the optical responses of TSSs from those of the bulk, which opens the door to resolving an ongoing debate regarding whether it is possible to reliably extract topological signatures in HHG.

Atomic Physics (physics.atom-ph)↗

An investigation of RF sputter etched silicon surfaces using helium ion backscatter

The effect of RF sputter etching on the (111) surface of silicon was studied by observing backscatter spectra from a 2 MeV, He-4(+) beam oriented along the silicon 111 orientation channel. Silicon samples were RF sputter etched in an argon discharge at electrode bias potentials ranging from 0.5 to 2.5 kV. The samples were sputter etched for a time sufficient for the lattice damage to reach saturation. Analysis of these samples revealed that the thickness of this damage layer and the concentration of trapped argon increased with electrode bias potential. An annealing study of these damaged surfaces was carried out to 900 C.

Sachse, G. W.↗

Investigations related to the inviscid-viscous interaction in transonic flows about finite 3-D wings

Inviscid small-disturbance theory has been shown to predict three-dimensional transonic flows about finite wings reasonably well as long as viscous effects are negligible. In order to include these effects, the inviscid small-disturbance solution of Bailey and Ballhaus (1975) has been combined with a finite-difference solution for Prandtl's boundary-layer equations. This solution employs the conditionally stable Krause (1968) scheme, implicit in the direction normal to the wall, to cope with the domain-of-dependence problem that arises for reverse cross flow. To be consistent with the inviscid-flow solution, the boundary layer is computed in the representative wing planform plane which is transformed into rectangular shape in the computational domain. The flow has been assumed turbulent, and a scalar eddy-viscosity model is adopted. The interaction between inviscid and viscous flow is modeled with the help of the displacement surface which is added to the geometric wing shape. Sample distributions of displacement thickness for swept wings are presented for weak and strong interaction cases.

Kordulla, W.↗

Microwave radiometry for soil moisture sensing

Investigations have been conducted with truck-mounted radiometers to study the variation of microwave emissivity from a soil. It was found that the longer wavelength radiometers, (21 cm), are preferable for the remote sensing of soil moisture. Aircraft observations indicated a nonlinear dependence of microwave brightness temperature on soil moisture. The dielectric constants of soils are considered along with the radiative transfer in soils, and soil water characteristics. A description is presented of test flights conducted with a NASA aircraft, taking into account soil moisture measurements and instrumentation. The obtained results show that the surface emissivity of a soil is determined by the dielectric properties of the surface soil layer a few tenths of a wavelength thick while the thermal sampling depths are much greater. The capability of the 21-cm radiometer to sense soil-moisture variations through a moderate vegetation canopy, and the promising Skylab results encourage consideration of a radiometer operating at this wavelength for routine soil moisture observations.

Schmugge, T.↗

Thickness of Ridged Plains Materials in Hesperia Planum, Mars

The thickness distribution of plains-forming materials in Hesperia Planum is determined by the diameter of partially buried craters. As with all Martian thickness studies, the distribution of measured thicknesses is sparse due to a low number of suitable partially buried craters. The resulting isopach of plains materials has a low level of confidence but is sufficient for generalized thickness trends. The mean of the thickness estimates is 360 + or - 120 m. The isopach of plains-forming materials exhibits an uneven thickness distribution. Average thickness, determined by grid sampling over the region, is 216 + or - 153 m. Local lenses exceed 500 m. A fifth order trend surface provides a partial match (coefficient of correlation = 0.657) to the isopach.

Dehon, R. A.↗

Atomic oxygen effects on metals

The effect of specimen geometry on the attack of metals by atomic oxygen is addressed. This is done by extending the coupled-currents approach in metal oxidation to spherical and cylindrical geometries. Kinetic laws are derived for the rates of oxidation of samples having these geometries. It is found that the burn-up time for spherical particles of a given diameter can be as much as a factor of 3 shorter than the time required to completely oxidize a planar sample of the same thickness.

Fromhold, Albert T.↗

Preliminary investigations into UHCRE thermal control materials (A0178)

An overview of the initial work that was done in the ESTEC Materials and Processes Division to evaluate the effect of space environment on the thermal blankets of the Ultra-Heavy Cosmic Ray Nuclei Experiments (UHCRE) is presented. The topics covered include: (1) a preliminary survey of the perforations of the two-thirds of the thermal blanket returned to ESTEC; (2) thermo-optical properties and thickness recessions of three samples cut from each of the third center parts of the 16 thermal blankets were measured and effects of environments (sun illumination and atomic oxygen fluences); (3) contamination was analyzed on trays, external blanket and internal aluminized Kapton foil by IR technique and scanning electron microscopy SEM/EDX examination; (4) the pattern of contamination on the Al Kapton foils was observed, sketched, and related to atomic oxygen flow; and (5) the Long Duration Exposure Facility (LDEF) yaw angle misorientation was evaluated from the contaminated areas visible on some of the trays. In addition, impacts of micrometeoroids and space debris were experimentally simulated on spare flight thermal blankets. Relations between penetration/perforation hole characteristics and projectile parameters were established.

Levadou, Francois↗

Modeling the reflectance of CO2 frost with new optical constants: Application to Martian south polar cap spectra

New measurements of the absorption coefficients of CO2 ice, in most of the spectral range 0.2 to 3.9 microns where absorption coefficients are below 1.5 per cm, have recently been made. Although these measurements are preliminary, they contain spectral detail not seen previously in the literature. Therefore, it is useful to combine these new data with older data from spectral regions of stronger absorption and reformulate models of the albedo or reflectance of CO2 frost. These models can then be adjusted in an attempt to match measurements of Martian polar deposits, such as the set of spectra returned by the IRS instrument on Mariner 7 (1969). The new absorption coefficients of CO2 ice were measured on several samples of 41-mm thickness at 150-155 K. A portion of the spectrum from 1.9 to 3.9 microns wavelength is shown in the form of imaginary coefficient of refraction ( = linear absorption x wavelength / 4 pi). The data above 3x10(exp -5) are obtained from, except for the absorption line at 3.32 micrometers, which is extrapolated in a way that is consistent with laboratory frost measurements, but the peak level is still highly uncertain. This new imagary coefficient, combined with the real coefficient, can be immediately applied to the models for hemispherical albedo, resulting in markedly different results from those in that study. The results for an infinite optical depth layer and solar incidence of 60 degrees are plotted for a range of mean particle radii from 0.03 to 3 mm.

Hansen, Gary B.↗

1-D Transient Thermal Modeling of an Ablative Material (MCC-1) Exposed to a Simulated Convective Titan 4 Launch Environment

The purpose of the work is to demonstrate that the flat test panel substrate temperatures are consistent with analysis predictions for MCC-1 applied to a aluminum substrate. The testing was performed in an aerothermal facility on samples of three different thicknesses of MCC-1 on an aluminum substrate. The results of the test were compared with a Transient Thermal model. The key assumptions of the Transient Thermal model were: (1) a one-dimensional heat transfer; (2) a constant ablation recession rate (determined from pre and post-test measurements); (3) ablation temperature of 540 degrees F; (4) Char left behind the ablation front; and (5) temperature jump correction for incident heat transfer coefficient. Two methods were used to model the heating of bare MCC-1: (1) Directly input surface temperature as a function of time; and (2) Aerothermal heating using calibration plate data and subtracting the radiation losses to tunnel walls. The results are presented as graphs. This article is presented in Viewgraph format.

Reinarts, Thomas R.↗

Major and Trace Element Variations in Impact Crater Clay from Chicxulub, Lonar, and Mistastin, Implications for the Martian Soil

The catastrophic Chicxulub event should have generated a large hydrothermal system with volatile element mobilization, producing interesting alteration materials and clays. The Yaxcopoil-1 (YAX) drill hole is located in the annular trough, about 70 km southwest of the crater center, in an area where the impactite layers are relatively thin (approx. 100 m thick). We have analyzed samples from the YAX drill core and from other impact craters including Mistastin and Lonar to determine the nature of alteration and trace element mobilization.

Newsom, H. E.↗

Tomographic Location of Potential Melt-Bearing Phenocrysts in Lunar Glass Spherules

In 1971, Apollo 17 astronauts collected a 10 cm soil sample (74220) comprised almost entirely of orange glass spherules. Below this, a double drive-tube core sampled a 68 cm thick horizon comprised of orange glass and black beads (crystallized equivalents of orange glass). Primitive lunar glass spherules (e.g.-A17 orange glasses) are thought to represent ejecta from lunar mare fire fountains [1, 2]. The fire-fountains were apparently driven by a combination of C-O gas ex-solution from orange glass melt and the oxidation of graphite [3, 4]. Upon eruption, magmas lost their volatiles (e.g., S, CO, CO2) to space. Evidence for volatile escape remains as volatile-rich coatings on the exteriors of many spherules [e.g., 5,6]. Moreover, [7] showed that Type I and II Fe-Ni-rich metal particles found within orange glass olivine phenocrysts, or free-floating in the glass itself, are powerful evidence for the volatile driving force for lunar fire fountains.

Ebel, D. S.↗

Polyvinyl Alcohol and Medium Density Polyethylene Composite Materials for Neutron Radiation Shielding

Manned spacecraft venturing beyond the Earth’s Van Allen Belts will be subjected to high levels of radiation from both energetic particles emanating from the sun and from galactic atomic events, such as supernovae. The metal shell of a spacecraft offers some protection from gamma radiation and high energy particles originating from both the sun and cosmic sources. The interaction of these high energy particles and radiation with the spacecraft hull create secondary radiation and neutrons, additional hazards for astronauts and electronic systems. Shielding of neutrons is the most challenging of the high energy radiation, since neutrons have zero charge and are least affected by electrical fields, magnetic fields, and atomic forces. Previous studies showed that polyethylene is an effective neutron shielding material, due to its high hydrogen content. High energy neutrons are slowed to thermal neutrons through multiple collisions with the hydrogen atoms, increasing the effectiveness of neutron capture by boron-10 atoms. This study discusses the fabrication and testing of polyvinyl alcohol (PVOH) samples as a neutron shielding material, with comparison to medium density polyethylene (MDPE) composite samples to be used for neutron shielding for spacecraft. PVOH, an aqueous polymer, was chosen for hydrogen content and for enabling the use of organic reinforcement such as cellulose for secondary structural composites. OLTARIS (On-Line Tool for the Assessment of Radiation in Space) was used for radiation shielding simulation and compared with experimental data. Modeling indicates that the most effective shielding from radiation was in an aluminum layer backed by a polymer layer, either MDPE or PVOH. Cross-linked PVOH was also included in the OLTARIS modeling. All 3 polymer cases showed shielding improvement over aluminum alone, with similar dose equivalent reduction for galactic cosmic radiation(GCR)and for radiation from a solar particle event (SPE). Fourier Transform Infrared (FTIR) Spectroscopy was used to confirm the cross-linking in the PVOH sample and to determine the uniformity through the thickness. PVOH, cross-linked PVOH, and MDPE samples were tested for neutron shielding effectiveness using a 1 curie Americium-Beryllium neutron source. Test results indicated the most shielding in the cross-linked PVOH, followed by the pristine PVOH, and MDPE. Neutron testing suggests that polyvinyl alcohol is a good alternative to polyethylene for neutron shielding. The neutron shielding materials, PVOH and cross-linked PVOH developed under this research will enable the safe operation of spacecraft beyond the Earth’s protective Van Allen Radiation Belts. It will be crucial for NASA’s manned missions to the Moon or Mars to protect the health of astronauts and equipment from the harmful effects of excessive radiation.

neutron, shielding, radiation, polyvinyl alcohol, ↗

Phosphate Textural Diversity in CI Chondrites and C-Type Asteroids

Introduction: Apatite, Ca 5 (PO 4 ) 3 (CL/F/OH-), is a ubiquitous phosphate found throughout the solar system, including the most primitive solids, CI-chondrites [1,2] and related samples of carbonaceous asteroids Ryugu [3] and Bennu [4], returned by JAXA’s Hayabusa2 and NASA’s OSIRIS-REx missions, respectively. Apatite in these primitive solids is found as individual grains or mineral clusters and has been inferred to form from the hydrothermal sequence during cooling of their respective parent body or bodies. To better understand the formation history and reworking of these early phosphates we have undertaken a highly coordinated study of phosphate microstructures, geochemistry and U/Pb geochronology from a suite of CI meteorites and carbonaceous asteroid samples. These data have identified novel phosphate microstructures and complex relationships across a suite of apatite grains from the early solar system, indicating multiple episodes of growth and modification on the CI parent body(ies). Methods: Samples of CI chondrites, Alais, Ivuna, Orgueil, Oued Chebeika 002, Yamato (Y) 82162, Y980115, Y980134, and two chips of Hayabusa2 Ryugu particles (A0262 and C0263) have been acquired for analysis. The bulk texture of the samples were first scanned by X-ray Computed Tomography (XCT) using the Nikon XT H 320 within the XFACT facility at NASA JSC or the Xradia 620 Versa at the UTCT facility. Based on the identification of petrofabrics or features of interest from the XCT data, samples were chipped, oriented, potted in epoxy and thick sections were prepared. After anhydrously polishing the samples with silicon carbide and dry diamond powder down to 1 µm, the samples were ion polished using a Hitachi ArBlade. Energy dispersive Xray spectrometry (EDS) maps were collected to ID phosphates of interest using a JEOL 7900F SEM. The internal microstructures of identified phosphates were then mapped by electron backscatter diffraction (EBSD) using the JEOL 7900F. Based on the EDS and EBSD data, domains of interest were targeted for quantitative chemical analyses using a JEOL 8530 EPMA. Subsequently, in situ U-Pb and 207 Pb/ 206 Pb ages will be collected using a Cameca ims1290 secondary ion mass spectrometer at UCLA across a range of microstructures. Results: Apatite grains are ubiquitous throughout the CI chondrites and carbonaceous asteroid materials, found as individual grains, disseminated clusters or grain aggregates. Apatite grains are associated with serpentine, magnet-ite, and/or carbonate. Of particular interest, we have identified individual and aggregate polycrystalline grains ex-hibiting an internal ‘honeycomb’ texture (Fig. 1). Some of these grains appear overprinted by subsequent alteration while others remain unaltered. Apatite halogen sites are dominated by the missing component, assumed to be OH, and F, comparable to published values from Bennu, Ryugu and CM-chondrites [3-5]. However, the Yamato CI-like meteorites show a broader range of Cl values, and one grain from Alais is dominated by CL. Summary: Apatite growth features indicate a protracted and complex growth history, consistent with precipitation from an evolving fluid system. The ‘honeycomb’ texture identified in some CI meteorites is, to the best of our knowledge, the first report of such a microstructure in meteoritic phosphate. The microtextures and zoning will guide subsequent age analyses, to better constrain the formation and reworking of phosphate in CI(-like) materials. Acknowledgments: We thank the National Institute of Polar Research, Japan for samples of Y82162, 980115 and 980134 meteorites, ASU’s Buseck Center for Meteorite Studies for samples of Ivuna and Alais meteorites, and JAXA curation for chips of Ryugu material. This work was funded by NASA ROSES LARS grant 24-LARS24-0014. References: [1] Morlok et al., 2016, GCA 70:5371-5394. [2] Alfin g et al., 2019, Geochemistry 79:125532. [3] Nakamura et al. (2022) Science 379:1-15. [4] Seifert et al. (2026) MAPS 61:504-521. [5] Piralla et al. (2021) MAPS 56:809-828.

CI chondrites↗

5 Inch Thick 2219-T87 Plate Low Ductility Investigation - Material Analysis on Broken 2219 Tensile Samples

2219-T87 material used on a LOX tank baffle support on Artemis-I showed unusually low fracture elongation. Recent material data indicated 5” thick 2219-T87 plate stock had very low ductility (<1%) in the short transverse direction at the half-thickness location. Metallurgical analysis performed to understand the root cause that led to the drastic reduction in tensile ductility. The PowerPoint report details the key findings from material analysis by optical and scanning electron microscopy.

aluminum alloy 2219↗