Search NASA⌕ Search

SEARCH · Search NASA

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Vapor-Particle Separation Using Microporous Metallic Membrane in Crossflow Filtration

Simultaneous separation of vapor and particles in industrial processes could be a key step toward manufacturing of high-quality goods. The separation is critical for successful measurement of volatile or semi-volatile aerosol particles, which no reliable technique exists. We have developed a technique for separation of vapor and particles simultaneously using a specialty microporous metallic membrane. The separator allows the thermally denuded particles traverse straight through the membrane tube, while the vapor molecules permeate through the membrane, separate from the particles and are removed subsequently. The separation technique virtually eliminates the possibility of contamination by vapor re- condensation. We tested the prototype of the vapor-particle separator (VPS) using aerosols prepared from sodium chloride to represent non-volatile aerosols. Chemical like dioctyl phthalate was chosen to represent volatile particles. The test aerosol particles were generated by an atomizer followed by a tandem differential mobility analyser to produce a stream of monodisperse particles in the size range of 10 to 100 nm. In real world particles, we tested the VPS using diesel engine particles that is a mixture of complex chemical composition. Number concentration of the nonvolatile particles reduced as the temperature increased, but the mode diameter of the aerosol population remained unchanged. Number concentration of the volatile particles was also reduced as the temperature increased, but their mode diameters became smaller as particles shrunk in diameter. Differences in the thermal behaviour of the particles were attributed to its transition energy barrier and evaporation rate. Mass balance analysis suggests the separation of vapor and test particles was reasonably complete. Thus, we conclude the VPS could provide an effective means for quantitative characterization of aerosol volatility and separation of vapors from particles.

aerosol↗

Separability in consistent truncations

The separability of the Hamilton-Jacobi equation has a well-known connection to the existence of Killing vectors and rank-two Killing tensors. This paper combines this connection with the detailed knowledge of the compactification metrics of consistent truncations on spheres. The fact that both the inverse metric of such compactifications, as well as the rank-two Killing tensors can be written in terms of bilinears of Killing vectors on the underlying “round metric,” enables us to perform a detailed analyses of the separability of the Hamilton-Jacobi equation for consistent truncations. We introduce the idea of a separating isometry and show that when a consistent truncation, without reduction gauge vectors, has such an isometry, then the Hamilton-Jacobi equation is always separable. When gauge vectors are present, the gauge group is required to be an abelian subgroup of the separating isometry to not impede separability. We classify the separating isometries for consistent truncations on spheres, S n , for n = 2, …, 7, and exhibit all the corresponding Killing tensors. These results may be of practical use in both identifying when supergravity solutions belong to consistent truncations and generating separable solutions amenable to scalar probe calculations. Finally, while our primary focus is the Hamilton-Jacobi equation, we also make some remarks about separability of the wave equation.

79 ASTRONOMY AND ASTROPHYSICS↗

Separation of Refined Silicon from Al-Si Alloys by Air Pressure Filtration

The separation of refined silicon from Al-Si alloys through a solvent refining process was studied. Purified silicon particles were separated by air pressure filtration using stainless steel sieves as the filtration media. After the efficient removal of impurities in the refining process, the effects of the mesh number (N), separation temperature (T), silicon content in the alloy (ω{sub (a)}), and pressure differential (p) on the separation efficiency were evaluated. At N = 80, T = 873 K (600 °C), ω{sub (a)} = 45 wt pct and p = 0.25 MPa, the recovery rate of refined silicon was 98.2 pct, and the residual aluminum in the separated silicon was less than 8 wt pct. The separation process was efficient when N = 60 to 150. It was advisable for the separation temperature to approach the eutectic temperature. Efficient filtration could be achieved when ω{sub (a)} = 35 to 55 wt pct. The filtration efficiency was improved with a higher pressure differential, and the separation was efficient at p ≥ 0.10 MPa. The results show that air pressure filtration is a promising method to separate refined silicon.

36 MATERIALS SCIENCE↗

An application of the theory of planned behaviour to study the influencing factors of participation in source separation of food waste

Highlights: ► Theory of planned behaviour (TPB) has been conducted to identify the influencing factors for participation in source separation of food waste using self administered questionnaires. ► The findings suggested several implications for the development and implementation of waste separation at home programme. ► The analysis indicates that the attitude towards waste separation is determined as the main predictors where this in turn could be a significant predictor of the repondent’s actual food waste separation behaviour. ► To date, none of similar have been reported elsewhere and this finding will be beneficial to local Authorities as indicator in designing campaigns to promote the use of waste separation programmes to reinforce the positive attitudes. - Abstract: Tremendous increases in biodegradable (food waste) generation significantly impact the local authorities, who are responsible to manage, treat and dispose of this waste. The process of separation of food waste at its generation source is identified as effective means in reducing the amount food waste sent to landfill and can be reused as feedstock to downstream treatment processes namely composting or anaerobic digestion. However, these efforts will only succeed with positive attitudes and highly participations rate by the public towards the scheme. Thus, the social survey (using questionnaires) to analyse public’s view and influencing factors towards participation in source separation of food waste in households based on the theory of planned behaviour technique (TPB) was performed in June and July 2011 among selected staff in Universiti Putra Malaysia, Serdang, Selangor. The survey demonstrates that the public has positive intention in participating provided the opportunities, facilities and knowledge on waste separation at source are adequately prepared by the respective local authorities. Furthermore, good moral values and situational factors such as storage convenience and collection times are also encouraged public’s involvement and consequently, the participations rate. The findings from this study may provide useful indicator to the waste management authorities in Malaysia in identifying mechanisms for future development and implementation of food waste source separation activities in household programmes and communication campaign which advocate the use of these programmes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A novel process for separation of hazardous poly(vinyl chloride) from mixed plastic wastes by froth flotation

Highlights: • A novel method was proposed for separation of PVC by froth flotation. • Calcium hypochlorite treatment improves selectively surface wettablity. • Mechanism of surface treatment was examined by SEM, FTIR and XPS. •Binary plastics with different particle sizes were separated effectively. • Separation of PVC from mixed plastic wastes was obtained. - Abstract: A novel method, calcium hypochlorite (CHC) treatment, was proposed for separation of hazardous poly(vinyl chloride) (PVC) plastic from mixed plastic wastes (MPWs) by froth flotation. Flotation behavior of single plastic indicates that PVC can be separated from poly(ethylene terephthalate) (PET), poly(acrylonitrile-co-butadiene-co-styrene) (ABS), polystyrene (PS), polycarbonate (PC) and poly(methyl methacrylate) (PMMA) by froth flotation combined with CHC treatment. Mechanism of CHC treatment was examined by contact angle measurement, scanning electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy. Under the optimum conditions, separation of PVC from binary plastics with different particle sizes is achieved efficiently. The purity of PC, ABS, PMMA, PS and PET is greater than 96.8%, 98.5%, 98.8%, 97.4% and 96.3%, respectively. Separation of PVC from multi-plastics was further conducted by two-stage flotation. PVC can be separated efficiently from MPWs with residue content of 0.37%. Additionally, reusing CHC solution is practical. This work indicates that separation of hazardous PVC from MPWs is effective by froth flotation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Aqueous Interfaces in Chemical Separations

Chemical separations play a vital role in refinery and reprocessing of critical materials, such as platinum group metals, rare earths, and actinides. The choice of separation system─whether it is liquid–liquid extraction (LLE), sorbents, or membranes─depends on specific needs and applications. In almost all separation processes, the desired metal ions adsorb or transfer across an aqueous interface, such as the solid/liquid interface in sorbents or oil/water interfaces in LLE. Despite these separation technologies being extensively used for decades, our understanding of the molecular-scale mechanisms governing ion adsorption and transport at interfaces remains limited. This knowledge gap presents a significant challenge in meeting the increasing demands for these critical materials due to their growing use in advanced technologies. Fortunately, recent advancements in surface-specific experimental and computational techniques offer promising avenues to bridge this gap and facilitate the development of next-generation separation systems. Interestingly, unanswered questions regarding interfacial phenomena in chemical separations hold great relevance to various fields, including energy storage, geochemistry, and atmospheric chemistry. Therefore, the model interfacial systems developed for studying chemical separations, such as amphiphilic molecules assembled at a solid/water, air/water, or oil/water interface, may have far-reaching implications, extending beyond separations and opening doors to addressing a wide range of scientific inquiries. This perspective discusses recent interfacial studies elucidating amphiphile–ion interactions in chemical separations of metal ions. Finally, these studies provide direct, molecular-scale information about solute and solvent behavior at aqueous interfaces, including multivalent and complex ions in highly concentrated solutions, which play key roles in LLE of critical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kr/Xe Separation over a Chabazite Zeolite Membrane

Cryogenic distillation, the current conventional technology to separate Krypton and Xenon from air, and from nuclear reprocessing technologies, is an energy-intensive and expensive process. Membrane technology could potentially make this challenging industrial separation less energy intensive and economically viable. We demonstrate that chabazite zeolite SAPO-34 membranes effectively separated Kr/Xe gas mixtures at industrially relevant compositions. Control over membrane thickness and average crystal size led to industrial range permeances and high separation selectivities. Specifically, SAPO-34 membranes can separate Kr/Xe mixtures with Kr permeances as high as 361.4 GPU and separation selectivities of 34.8 for molar compositions close to typical concentrations of these two gases in air. In addition, SAPO-34 membranes separated Kr/Xe mixtures with Kr permeances as high as 525.7 GPU and separation selectivities up to 45.1 for molar compositions as might be encountered in nuclear reprocessing technologies. Molecular sieving and differences in diffusivities were identified as the dominant separation mechanisms.

Feng, Xuhui↗

Process and apparatus for separating solid mixtures

An elutriation column is installed in a separation tank. The elutriation column includes a vertical separation column having a first side feed arm and a second side overflow arm spaced above the first side feed arm. Water is forced upwardly through the vertical separation column at a controllable velocity. A solid feed mixture is fed through the first side feed arm to the vertical separation column. Water from the tank rising in the vertical separation column at the controlled velocity causes targeted floater materials to move upwardly in the vertical separation column and heavier sinker materials to continue to sink. The floater materials flow from an outlet in the side of the separation tank into the recovery tank. At a discharge, lower end of the vertical separation column, the heavier sinker materials are removed from the separation tank. A mechanism is provided for purging undesirable materials that can cause plugging from the feed arm.

Jody, Bassam J.↗

Separable Organic Evaluation: Waste Feed Delivery Impacts - 17563

The potential for separable organic materials to separate out from Hanford tank waste requires consideration for future Waste Feed Delivery operations. Separable organic materials are organic compounds of very limited solubility in bulk waste that can form a separate phase or layer. If the organic materials bound to waste separates during mixing and transfer operations, the feed batch would be disqualified under the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria for 'no visible immiscible layer.' Sample data and process history were used to identify tanks with the potential to contain separable organic materials. Centrifuge testing was performed on available archived tank samples and on waste simulants developed to mimic characteristics of the archived tank samples. A separable layer formed during centrifuge testing of archived samples 241-C-204, 241-SY-102, and for all developed simulants tested. Due to the formation of a separable organic layer during the centrifugation studies, an impact assessment was performed. This impact assessment identified forty-four potential tanks of concern regarding the release of organic material bound to solids during waste disturbing activities. A Hanford Tank Waste Operations Simulator model run was modified to trace the origin of each batch to the WTP. The outputs of the model run indicated that a separable organic layer would form during High Level Waste Feed Delivery operations and would cascade to all tanks containing or receiving significant amounts of organic solvents/diluents. Hence, there is a potential for a ripple effect across the feed batches. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanically and thermally robust microporous copolymer separators for lithium ion batteries

Next generation, multifunctional separators can enhance energy storage, power, and safety performance of lithium ion batteries but must be simple to fabricate and incorporate with existing roll-to-roll manufacturing. Here, this study presents a strategy to facilely prepare these separators using UV-initiated polymerization-induced phase separation (PIPS), wherein microporous polymer separators are fabricated directly from constituent monomers and ethylene carbonate (EC) porogen. This enables a wide compositional design space as co-monomers with specific chemical functionality can be readily incorporated into the PIPS precursor mixture. Herein, 1,4-butanediol diacrylate (BDDA) was copolymerized with poly(ethylene glycol) diacrylate (PEGDA) to increase the acrylate conversion in the photopolymerization and improve mechanical properties. By tuning the ratio of PEGDA and EC, separators with high porosity (41.3%) and effective ionic conductivity (2.09 mS cm –1 ) were prepared. Inclusion of PEGDA was essential to increasing the elastic modulus to > 345 MPa, which is required for cell assembly by roll-to-roll manufacturing. All separators prepared were shown to enable reversible cycling of lithium metal/LiNi 0.5 Mn 0.3 Co 0.2 O 2 half-cells for 100 cycles. Unlike conventional polyolefin separators, which were shown to melt at 160 °C and shrink by up to 29.8% at elevated temperatures, the PIPS separators possess exceptional, safety-enhancing thermomechanical properties, undergoing no phase transitions or thermal shrinkage.

25 ENERGY STORAGE↗

Protein-based approach for high-purity Sc, Y, and grouped lanthanide separation

Rare earth elements (REEs: Sc, Y, La- Lu) are irreplaceable components in many clean energy and consumer technologies. However, the extraction and subsequent separation of individual REEs from ore-based feedstocks remains a significant economic and environmental challenge. Here in this work, we investigated the intra-REE separation potential of lanmodulin (LanM), a natural protein from Methylorubrum extorquens that has emerged as a sustainable potential alternative to conventional solvent extraction-based separation. By determining the intra-REE selectivity of immobilized LanM and systematically testing pH-based and small chelator-based (i.e., citrate and malonate) desorption processes, we established the framework and methodology for achieving select individual and grouped REE separations from a mixed REE feedstock. We show that Sc forms the tightest complex with LanM among REEs but can be readily and selectively desorbed using malonate to generate high-purity Sc (>99 % purity, >99 % yield) in a single adsorption/desorption cycle. We further show that the intrinsic REE selectivity of LanM is sufficient to achieve heavy REE (HREE) separation from light and middle REEs (L-MREEs), yielding an yttrium-enriched product. This separation effect is further magnified by pairing LanM’s unique M-LREE preference with a HREE-preferring chelator in the desorption process, which enriches HREE and MREE fractions relative to low value, abundant La/Ce. Finally, by combining pH- and citrate-based desorption processes in a two-cycle separation scheme, we demonstrate the generation of fractions highly enriched in Y, Gd-Lu, Pr-Eu, and La-Ce. Collectively, these data support the application of a LanM-based approach for achieving impactful REE separations from mixed REE feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, the commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O 2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) was fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly showed that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating Rate Calorimetry test revealed that the practical 1 Ah LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dt max ) of only 3.7 °C s -1 compared to 131.6 °C s -1 in the case of Al 2 O 3 @PE macroporous separator. Furthermore, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al 2 O 3 @PE separator at high temperature without sacrificing specific capacity and rate capability.

25 ENERGY STORAGE↗

Topological origin of phase separation in hydrated gels

Depending on their composition, hydrated gels can be homogeneous or phase-separated, which, in turn, affects their dynamical and mechanical properties. However, the nature of the structural features, if any, that govern the propensity for a given gel to phase-separate remains largely unknown. Here, we argue that the propensity for hydrated gels to phase-separate is topological in nature. We employ reactive molecular dynamics simulations to model the early-age precipitation of calcium–alumino–silicate–hydrate (Csingle bondAsingle bondSsingle bondH) gels with varying compositions, i.e., (CaO) 1.7 (Al 2 O 3 ) x (SiO 2 ) 1 – x (H 2 O) 3.7 + x . By adopting topological constraint theory, we investigate the structural origin of phase separation in hydrated gels. We report the existence of a homogeneous-to-phase-separated transition, wherein Si-rich (x ≤ 0.10) Csingle bondAsingle bondSsingle bondH gels are homogeneous, whereas Al-rich (x > 0.10) Csingle bondAsingle bondSsingle bondH gels tend to phase-separate. Furthermore, we demonstrate that this transition is correlated to a topological flexible-to-rigid transition within the atomic network. Finally, we reveal that the propensity for topologically-overconstrained gels to phase-separate arises from the existence of some internal stress within their atomic network, which acts as an energy penalty that drives phase separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functionalized separator for next-generation batteries

Advancements in battery technology have dramatically increased demand for improvements in separator design, as the separator plays a critical role in ensuring the safety and electrochemical performance of the cells. Current separators, either in commercial usage or under investigation, have yet to meet the high stability and lifespan performance standards necessary to prevent deterioration in the efficiency and reliability of the battery technologies. Recently, considerable effort has been devoted to developing functionalized separators, ranging from designing a variety of new materials and modification methods, and increasingly, to optimizing advanced preparation processes. In order to understand how the mechanisms of separator performance are affected by different properties, we will first summarize recent research progress and then have in-depth discussions regarding the separator's significant contribution to enhancing the safety and performance of the cell. Additionally, we then provide our design strategy for future separators, which not only meets the requirements of different type of batteries, but also aims for multifunctionality. We hope such a perspective could provide new inspiration in the development of separator research for future battery technologies.

25 ENERGY STORAGE↗

Mo-99/Tc-99m Separation: An Assessment of Technical Options

Several strategies for the effective separation of 99mTc from 99Mo have been developed and validated. Due to the success of column chromatographic separation using acidic alumina coupled with high specific activity fission 99Mo (F 99Mo) for production of 99Mo/99mTc generators, however, most technologies until recently have generated little interest. The reduced availability of F 99Mo and consequently the shortage of 99Mo/99mTc column generators in the recent past have resurrected interest in the production of 99Mo as well as 99mTc by alternate routes. Most of these alternative production processes require separation techniques capable of providing clinical grade 99mTc from low specific activity 99Mo or irradiated Mo targets. For this reason there has been renewed interest in alternate separation routes. This paper reviews the reported separation technologies which include column chromatography, solvent extraction, sublimation and gel systems that have been traditionally used for the fabrication of 99Mo/99mTc generator systems. The comparative advantage, disadvantage, and technical challenges toward adapting the emerging requirements are discussed. New developments such as solid-phase column extraction, electrochemical separation, extraction chromatography, supported liquid membrane (SLM) and thermochromatographic techniques are also being evaluated for their potential application in the changed scenario of providing 99mTc from alternate routes. Based on the analysis provided in this review, it appears that some proven separation technologies can be quickly resurrected for the separation of clinical grade 99mTc from macroscopic levels of reactor or cyclotron irradiated molybdenum targets. Furthermore, emerging technologies can be developed further to respond to the expected changing modes of 99mTc production.

nuclear medicine↗

A novel process for separation of polycarbonate, polyvinyl chloride and polymethyl methacrylate waste plastics by froth flotation

Highlights: • KMnO{sub 4} treatment changes selectively flotation behavior of PC, PVC and PMMA plastics. • Ternary waste plastics are separated efficiently by froth flotation. • Recycling of KMnO{sub 4} solutions is conducted to make the process green. • A novel process is proposed for separation of waste plastics by froth flotation. - Abstract: A novel process was proposed for separation of ternary waste plastics by froth flotation. Pretreatment of plastics with potassium permanganate (KMnO{sub 4}) solution was conducted to aid flotation separation of polycarbonate (PC), polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) plastics. The effect of pretreatment parameters including KMnO{sub 4} concentration, treatment time, temperature and stirring rate on flotation recovery were investigated by single factor experiments. Surface treatment with KMnO{sub 4} changes selectively the flotation behavior of PC, PVC and PMMA, enabling separation of the plastics by froth flotation. Mechanism of surface treatment was studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectrum (XPS). Effect of frother concentration and flotation time on flotation behavior of plastic mixtures was further studied for flotation separation. The optimized conditions for separation of PC are KMnO{sub 4} concentration 2 mmol L{sup −1}, treatment time 10 min, temperature 60 °C, stirring rate 300 rpm, flotation time 1 min and frother concentration 17.5 mg L{sup −1}. Under optimum conditions, PVC and PMMA mixtures are also separated efficiently by froth flotation associated with KMnO{sub 4} treatment. The purity of PC, PVC and PMMA is up to 100%, 98.41% and 98.68%, while the recovery reaches 96.82%, 98.71% and 98.38%, respectively. Economic analysis manifests remarkable profits of the developed process. Reusing KMnO{sub 4} solution is feasible, enabling the process greener.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗

Microporous Crystalline Membranes for Kr/Xe Separation: Comparison between AlPO-18, SAPO-34, and ZIF-8

Herein we demonstrate the separation ability of AlPO-18 membranes for Kr/Xe gas mixtures. AlPO-18 membranes separated Kr/Xe mixtures with average Kr/Xe separation selectivity of 6.4 and unprecedented high average Kr permeance of 1.6 × 10-7 mol/m2·s·Pa. Diffusivity difference between Kr and Xe was identified as the dominant separation mechanism. We compared the separation performance of AlPO-18 membranes versus two other types of microporous crystalline membranes, namely, SAPO-34 and ZIF-8. SAPO-34 membranes displayed the best overall separation performance, while AlPO-18 membranes displayed the highest Kr permeances. We identified the key factors affecting both the separation selectivity and permeance. For these three distinctive types of microporous materials, the presence of rigid micropores with size lying between Kr and Xe atomic sizes, lower Xe/Kr uptakes (adsorption selectivity), and lower concentration of nonselective pores led to the highest observed s Kr/Xe separation selectivities among these three microporous crystals. The Kr permeances for these three microporous crystalline membranes decreased exponentially as membrane thickness increased.

microporous crystals, membranes, gas separations, ↗