Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Collisions of low-energy electrons with formamide

We present integral and momentum transfer cross sections for elastic scattering of low-energy electrons by formamide (HCONH{sub 2}) from 1 to 12 eV. To calculate the cross sections we employed the Schwinger multichannel method with pseudopotentials in the static-exchange and in the static-exchange-polarization approximations. We found a {pi}{sup *} shape resonance belonging to the A{sup ''} symmetry which is located at around 4.5 eV in the static-exchange approximation, and at around 2.5 eV in the static-exchange-polarization approximation. This result is in close agreement with the observations of Seydou et al. [Eur. Phys. J. D 35, 199 (2005)] which reported the value of 2.05 eV to the vertical electron attachment energy, and is lower than the value of 3.77 eV computed by Goumans et al. [J. Chem. Theory Comp. 5, 217 (2009)]. We carried out additional minimal basis set electronic structure calculations to help in the interpretation of our results. Our results support the conclusions of Goumans et al., namely, that this resonance may initiate the indirect dissociation mechanism of formamide by electron impact.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dipole strength in {sup 139}La below the neutron-separation energy

The {gamma}-ray strength function is an important input quantity for the determination of the photoreaction rate and the neutron capture rate for astrophysics as well as for nuclear technologies. To test model predictions, the photoabsorption cross section of {sup 139}La up to the neutron-separation energy was measured using bremsstrahlung produced at the electron accelerator ELBE of Forschungszentrum Dresden-Rossendorf with an electron beam of 11.5 MeV kinetic energy. The experimental data were analyzed by applying Monte Carlo simulations of {gamma}-ray cascades to obtain the intensities of the ground-state transitions and their branching ratios. We found a significant enhancement of electric dipole strength in the energy range from 6 to 10 MeV that may be related with a pygmy dipole resonance. The present data are combined with photoneutron cross sections for {sup 139}La and compared with results of calculations on the basis of a quasiparticle-random-phase approximation using an instantaneous-shape sampling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modification of roton instability due to the presence of a second dipolar Bose-Einstein condensate

We study the behavior of two coupled purely dipolar Bose-Einstein condensates (BECs), each located in a cylindrically symmetric pancake-shaped external confining potential, as the separation b between the traps along the tight confining direction is varied. The solutions of the coupled Gross-Pitaevskii and Bogoliubov-de Gennes equations, which account for the full dynamics, show that the system behavior is modified by the presence of the second dipolar BEC. For sufficiently small b, the presence of the second dipolar BEC destabilizes the system dramatically. In this regime, the coupled system collapses through a mode that is notably different from the radial roton mode that induces the collapse of the uncoupled system. Finally, we comment on the shortcomings of an approach that employs a separable wavefunction, which is assumed to be a good approximation for highly pancake-shaped dipolar BECs in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Consideration for the dynamic depolarization in the effective-medium model for description of optical properties for anisotropic nanostructured semiconductors

The effective-medium model has been generalized within the dipole approximation, with allowance for the shape anisotropy and dynamic depolarization of semiconductor nanoparticles. The calculations revealed nonmonotonic dependences for the birefringence and dichroism on the nanoparticle size. Comparison of the measured and calculated refractive index dispersion of birefringent porous silicon layers in the near-IR region indicates that consideration for the dynamic depolarization gives a better description of the optical properties for this material in comparison with the generally used effective-medium electrostatic approximation.

36 MATERIALS SCIENCE↗

Winds from accretion disks - Ultraviolet line formation in cataclysmic variables

Winds from accretion disks in cataclysmic variable stars are ubiquitous. Observations by IUE reveal P Cygni-shaped profiles of high-ionization lines which are attributed to these winds. We have studied the formation of UV emission lines in cataclysmic variables by constructing kinematical models of biconical rotating outflows from disks around white dwarfs. The photoionization in the wind is calculated taking into account the radiation fields of the disk, the boundary layer, and the white dwarf. The 3D radiative transfer is solved in the Sobolev approximation. Effects on the line shapes of varying basic physical parameters of the wind are shown explicitly. We identify and map the resonant scattering regions in the wind which have strongly biconical character regardless of the assumed velocity and radiation fields. Rotation at the base of the wind introduces a radial shear which decreases the line optical depth and reduces the line core intensity. We find that it is possible to reproduce the observed P Cygni line shapes and make some predictions to be verified in high-resolution observations.

Shlosman, Isaac↗

THE THERMAL STRUCTURE OF GRAVITATIONALLY DARKENED CLASSICAL Be STAR DISKS

The effect of gravitational darkening on models of the thermal structure of Be star disks is systematically studied for a wide range of Be star spectral types and rotation rates. Gravitational darkening causes a reduction of the stellar effective temperature toward the equator and a redirection of energy toward the poles. It is an important physical effect in these star-disk systems because the photoionizing radiation from the central B star is the main energy source for the disk. We have added gravitational darkening to the BEDISK code to produce circumstellar disk models that include both the variation in the effective temperature with latitude and the non-spherical shape of the star in the calculation of the stellar photoionizing radiation field. The effect of gravitational darkening on global measures of disk temperature is generally significant for rotation rates above 80% of critical rotation. For example, a B0V model rotating at 95% of critical has a density-averaged disk temperature Almost-Equal-To 2500 K cooler than its non-rotating counterpart. However, detailed differences in the temperature structure of disks surrounding rotating and non-rotating stars reveal a complex pattern of heating and cooling. Spherical gravitational darkening, an approximation that ignores the changing shape of the star, gives good results for disk temperatures for rotation rates less than Almost-Equal-To 80% of critical. However for the highest rotation rates, the distortion of the stellar surface caused by rotation becomes important.

79 ASTRONOMY AND ASTROPHYSICS↗

A vortex sheet based analytical model of the curled wake behind yawed wind turbines

Motivated by the need for compact descriptions of the evolution of non-classical wakes behind yawed wind turbines, we develop an analytical model to predict the shape of curled wakes. Interest in such modelling arises due to the potential of wake steering as a strategy for mitigating power reduction and unsteady loading of downstream turbines in wind farms. We first estimate the distribution of the shed vorticity at the wake edge due to both yaw offset and rotating blades. By considering the wake edge as an ideally thin vortex sheet, we describe its evolution in time moving with the flow. Vortex sheet equations are solved using a power series expansion method, and an approximate solution for the wake shape is obtained. The vortex sheet time evolution is then mapped into a spatial evolution by using a convection velocity. Apart from the wake shape, the lateral deflection of the wake including ground effects is modelled. Our results show that there exists a universal solution for the shape of curled wakes if suitable dimensionless variables are employed. For the case of turbulent boundary layer inflow, the decay of vortex sheet circulation due to turbulent diffusion is included. Finally, we modify the Gaussian wake model by incorporating the predicted shape and deflection of the curled wake, so that we can calculate the wake profiles behind yawed turbines. Model predictions are validated against large-eddy simulations and laboratory experiments for turbines with various operating conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radar investigation of asteroids

For 80 Sappho, 356 Liguria, 694 Ekard, and 2340 Hathor, data were taken simultaneously in the same sense of circular polarization as transmitted (SC) as well as in the opposite (OC) sense. Graphs show the average OC and SC radar echo power spectra soothed to a resolution of EFB Hz and plotted against Doppler frequency. Radar observations of the peculiar object 2201 Oljato reveal an unusual set of echo power spectra. The albedo and polarization ratio remain fairly constant but the bandwidths range from approximately 0.8 Hz to 1.4 Hz and the spectral shapes vary dramatically. Echo characteristics within any one date's approximately 2.5-hr observation period do not fluctuate very much. Laboratory measurements of the radar frequency electrical properties of particulate metal-plus-silicate mixtures can be combined with radar albedo estimates to constrain the bulk density and metal weight, fraction in a hypothetical asteroid regolith having the same particle size distribution as lab samples.

Ostro, S. J.↗

Derivation and test of elevated temperature thermal-stress-free fastener concept

Future aerospace vehicles must withstand high temperatures and be able to function over a wide temperature range. New composite materials are being developed for use in designing high-temperature lightweight structures. Due to the difference between coefficients of thermal expansion for the new composite materials and conventional high-temperature metallic fasteners, innovative joining techniques are needed to produce tight joints at all temperatures without excessive thermal stresses. A thermal-stress-free fastening technique is presented that can be used to provide structurally tight joints at all temperatures even when the fastener and joined materials have different coefficients of thermal expansion. The derivation of thermal-stress-free fasteners and joint shapes is presented for a wide variety of fastener materials and materials being joined together. Approximations to the thermal-stress-free shapes that result in joints with low-thermal-stresses and that simplify the fastener/joint shape are discussed. The low-thermal-stress fastener concept is verified by thermal and shear tests in joints using oxide-dispersion-strengthened alloy fasteners in carbon-carbon material. The test results show no evidence of thermal stress damage for temperatures up to 2000 F and the resulting joints carried shear loads at room temperature typical of those for conventional joints.

Sawyer, J. W.↗

OCCULTATION OBSERVATIONS OF SATURN'S B RING AND CASSINI DIVISION

The outer edge of Saturn's B ring is strongly affected by the nearby 2:1 inner Lindblad resonance of Mimas and is distorted approximately into a centered elliptical shape, which at the time of the Voyager 1 and 2 encounters was oriented with its periapse toward Mimas. Subsequent observations have shown that the actual situation is considerably more complex. We present a complete set of historical occultation measurements of the B-ring edge, including the 1980 Voyager 1 and 1981 Voyager 2 radio and stellar occultations, the 1989 occultation of 28 Sgr, two independently analyzed occultations observed with the Hubble Space Telescope in 1991 and 1995, and a series of ring profiles from 12 diametric (ansa-to-ansa) occultations observed in 2005, using the Cassini Radio Science Subsystem (RSS). After making an approximate correction for systematic errors in the reconstructed spacecraft trajectories, we obtain orbit fits to features in the rings with rms residuals well under 1 km, in most cases. Fits to the B-ring edge in the RSS data reveal a systematic variation in the maximum optical depth at the very edge of the ring as a function of its orbital radius. We compare the B-ring measurements to an m = 2 distortion aligned with Mimas, and show that there have been substantial phase shifts over the past 25 years. Finally, we present freely precessing equatorial elliptical models for 16 features in the Cassini Division. The inner edges of the gaps are generally eccentric, whereas the outer edges are nearly circular, with ae < 0.5 km.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis of offset dual shaped subreflector antennas for control of Cassegrain aperture distributions

The method presented for antenna upgrading involves a redesign of only the subreflector portion of a Cassegrain antenna or the introduction of a subreflector feed system for a paraboloid. A pair of offset subreflectors are synthesized which will produce a controllable high gain amplitude distribution in the aperture of the large paraboloid. The synthesis method is based on the approximate formulation for an offset dual shaped high gain antenna first presented by Galindo-Israel and Mittra (1977). It is pointed out that in their approximate formulation, the geometrical optics energy was scattered from a subreflector and then from a second large reflector, which reflected a uniform phase distribution. In the offset dual shaped subreflector (DSS) antenna proposed here, the second reflection is from a smaller (sub) reflector, and it scatters a spherical wave that feeds a hyperboloid or feeds a large paraboloid directly. The DSS synthesis is tested on the 210-ft-diameter Cassegrain antenna at Goldstone, California.

Galindo-Israel, V.↗

Energy Feedback from X-ray Binaries in the Early Universe

X-ray photons, because of their long mean-free paths, can easily escape the galactic environments where they are produced, and interact at long distances with the intergalactic medium, potentially having a significant contribution to the heating and reionization of the early universe. The two most important sources of X-ray photons in the universe are active galactic nuclei (AGNs) and X-ray binaries (XRBs). In this Letter we use results from detailed, large scale population synthesis simulations to study the energy feedback of XRBs, from the first galaxies (z (redshift) approximately equal to 20) until today.We estimate that X-ray emission from XRBs dominates over AGN at z (redshift) greater than or approximately equal to 6-8. The shape of the spectral energy distribution of the emission from XRBs shows little change with redshift, in contrast to its normalization which evolves by approximately 4 orders of magnitude, primarily due to the evolution of the cosmic star-formation rate. However, the metallicity and the mean stellar age of a given XRB population affect significantly its X-ray output. Specifically, the X-ray luminosity from high-mass XRBs per unit of star-formation rate varies an order of magnitude going from solar metallicity to less than 10% solar, and the X-ray luminosity from low-mass XRBs per unit of stellar mass peaks at an age of approximately 300 Myr (million years) and then decreases gradually at later times, showing little variation for mean stellar ages 3 Gyr (Giga years, or billion years). Finally, we provide analytical and tabulated prescriptions for the energy output of XRBs, that can be directly incorporated in cosmological simulations.

galaxies↗

An automated pipette puller for fabrication of glass micropipettes

Glass micropipettes are versatile probing tools for performing micro- and nano-manipulation tasks. This paper presents the design and development of an automated pipette puller system for fabrication of glass micropipettes. The pipette puller employs a new strategy for fabrication of micropipettes that enables achieving independent control of their taper, tip diameter, and bend-angle, and also facilitates theoretical derivation of simple, approximate relationships between the pipette shape and the pulling parameters. Subsequently, the design and fabrication of the pipette puller is described, which include that of the pipette heating system, the mechanical motion stages, and the control electronics of the pipette puller. The fabricated pipette puller is experimentally evaluated to demonstrate control of the taper, tip diameter, and the bend-angle of the micropipette. Further, the dependence of the taper and tip diameter on the pulling parameters is evaluated and is shown to be in alignment with the proposed theoretical relationships.

36 MATERIALS SCIENCE↗

The synthesis of porous Co{sub 3}O{sub 4} micro cuboid structures by solvothermal approach and investigation of its gas sensing properties and catalytic activity

Graphical abstract: - Highlights: • Micro cuboid Co{sub 3}O{sub 4} particle prepared by solvothermal method. • Study of morphology of synthesized cuboids before and after calcinations. • Investigation of formation mechanism of porous Co{sub 3}O{sub 4} from cuboid CoCO{sub 3}. • Investigation of gas sensing properties of porous Co{sub 3}O{sub 4}. • Study of catalytic activity of product. - Abstract: The cobalt carbonate cuboids are prepared by adopting a simple solvothermal approach by using diethylene glycol and water in specific ratio as solvent. The prepared cobalt carbonate is subjected to different instrumentation to investigate its morphology and other properties. It is clear from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the product is distinct cuboid in shape with a size of approximately 3 μm from each face of the cube. Each particle of cuboid cobalt carbonate seems to comprise of layer by layer assembly of unit cells that consequently leads to a cuboid geometry. The cuboid cobalt carbonate was calcined at 700 °C in a furnace under argon atmosphere that decompose cobalt carbonate into porous Co{sub 3}O{sub 4} with the loosely packed arrangement of nano architectures. The gas sensing properties and catalytic activity of porous cuboids Co{sub 3}O{sub 4} are also investigated.

36 MATERIALS SCIENCE↗

ISEE particle observations of surface waves at the magnetopause boundary layer

The dual-spacecraft ISEE mission provides a unique opportunity to study the motions of the magnetopause and adjacent boundary layer. By comparing high-time-resolution energetic particle data from ISEE 1 to those of ISEE 2, the velocity and orientation of the inner boundary of the boundary layer can be determined. Two cases are presented. In one, tailward propagating sinusoidally shaped surface waves with a wavelength in excess of 42,000 km and an amplitude of approximately 5000 km are found. In the other, surface waves are indicated with a wavelength of approximately 40,000 km and an amplitude of approximately 11,000 km having steepened nonsinusoidal shapes. The existence of such large-amplitude waves suggests that the particle dynamics near the magnetopause support nonlinear processes.

Couzens, D.↗

Neck curve polynomials in neck rupture model

The Neck Rupture Model is a model that explains the scission process which has smallest radius in liquid drop at certain position. Old fashion of rupture position is determined randomly so that has been called as Random Neck Rupture Model (RNRM). The neck curve polynomials have been employed in the Neck Rupture Model for calculation the fission yield of neutron induced fission reaction of {sup 280}X{sub 90} with changing of order of polynomials as well as temperature. The neck curve polynomials approximation shows the important effects in shaping of fission yield curve.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laser-induced nonsequential double ionization at and above the recollision-excitation-tunneling threshold

We perform a rigorous, semianalytic study of the recollision excitation with subsequent tunneling ionization (RESI) mechanism in laser-induced nonsequential double ionization (NSDI), based on the strong-field approximation. We show that the shapes of the electron momentum distributions carry information about the bound state with which the first electron collides, the bound state to which the second electron is excited, and the type of electron-electron interaction. Furthermore, one may define a driving-field intensity threshold for the RESI physical mechanism. At the threshold, the kinetic energy of the first electron, upon return, is just sufficient to excite the second electron. We compute the distributions for helium and argon in the threshold and above-threshold intensity regimes. In the latter case, we relate our findings to existing experiments. The electron momentum distributions encountered are symmetric with respect to all quadrants of the plane spanned by the momentum components parallel to the laser-field polarization, instead of concentrating on only the second and fourth quadrants. The above-mentioned momentum constraints, together with the strong dependence of the distributions on the bound states involved, may be important for singling out the RESI mechanism in actual physical situations and using NSDI in ultrafast imaging.

74 ATOMIC AND MOLECULAR PHYSICS↗

Computational aspects of sensitivity calculations in linear transient structural analysis

The calculation of sensitivities of displacements, velocities, accelerations, and stresses in linear, structural, and transient response problems is studied. Several existing sensitivity calculation methods and two new methods are compared for three example problems. Approximation vectors such as vibration mode shapes are used to reduce the dimensionality of the finite model. To be computationally practical in large-order problems, the overall finite difference methods must use the approximation vectors from the original design in the analyses of the perturbed models. This was found to result in poor convergence of stress sensitivities in several cases. Two semianalytical techniques are developed to overcome this poor convergence. Both new methods result in very good convergence of the stress sensitivities; the computational cost is much less than would result if the vibration modes were recalculated and then used in an overall finite difference method.

Greene, W. H.↗