Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Real-time estimation and control of divertor surface heat flux on the DⅢ-D tokamak

We report Future tokamaks will require robust technologies for the mitigation of heat exhaust onto the plasma-facing components. As a first step towards this development, a system has been developed at DIII-D that estimates and controls in real-time the heat flux to the PFCs. Real-time estimation of the peak power flux from this model-based approach is validated with off-line infra-red measurements for various DIII-D plasma discharges. A nonlinear free-boundary simulation code (GSevolve) is used for simulating the closed loop response and for the off-line determination of the control parameters. The implementation and first experimental results of the application during the DIII-D plasma campaign are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coherent dynamic structure factors of strongly coupled plasmas: A generalized hydrodynamic approach

A generalized hydrodynamic fluctuation model is proposed to simplify the calculation of the dynamic structure factor S(ω, k) of non-ideal plasmas using the fluctuation-dissipation theorem. In this model, the kinetic and correlation effects are both included in hydrodynamic coefficients, which are considered as functions of the coupling strength (Γ) and collision parameter (kλ{sub ei}), where λ{sub ei} is the electron-ion mean free path. A particle-particle particle-mesh molecular dynamics simulation code is also developed to simulate the dynamic structure factors, which are used to benchmark the calculation of our model. A good agreement between the two different approaches confirms the reliability of our model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling thermal radiation waves in silica plasmas for the Mooncat NIF experiment

The Mooncat experiment on the National Ignition Facility uses a laser-driven hohlraum to create a thermal radiation wave in a titanium-doped silica plasma. The titanium dopant enables absorption spectroscopy measurements to infer the temperature of the wave as it propagates. This measurement can be used to constrain multi-physics simulation codes to better understand when simulations do not match an experiment. In this paper, we present radiation-hydrodynamics simulations of the thermal radiation wave in the first full-platform shots of the Mooncat experiment. We examine the important parameters of the simulation, focusing on the radiation temperature source, the material model of the silica plasma as it pertains to radiation transport, and lateral leakage through a beryllium tube enclosing the silica. We compare different simulation modeling strategies to an analytic model of diffusive radiation transport and find that the simulation agrees with the analytic model when it is sufficiently simplified. These simulations show how radiation energy couples to matter to develop a shock wave in a radiative heat wave, an important topic in astrophysics and nuclear fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma flux expansion control on the DIII-D tokamak

A new controller has been developed with help of the flexible divertor poloidal-field coil set of the DIII-D tokamak, to aid in the precise control of the flux expansion in the scrape-off layer (SOL). Here, the single-input multiple-output (SIMO) architecture ensures flexibility through a complementary set of orthogonal actuator direction to guarantee minimum effect on existing controlled variables, e.g. radial and vertical position control of the X-point. A non-linear free-boundary simulation code (GSevolve) is used for simulating the closed-loop response and for verifying the implementation of the control algorithm on the DIII-D plasma control system (PCS). First results of the experimental commissioning of the new controller during 2020 DIII-D campaign are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Report on SNL RCBC control options

The attractive performance of the S-CO 2 recompression cycle arises from the thermo-physical properties of carbon dioxide near the critical point. However, to ensure efficient operation of the cycle near the critical point, precise control of the heat removal rate by the Printed Circuit Heat Exchanger (PCHE) upstream of the main compressor is required. Accomplishing this task is not trivial because of the large variations in fluid properties with respect to temperature and pressure near the critical point. The use of a model-based approach for the design of a robust feedback regulator is being investigated to achieve acceptable control of heat removal rate at different operating conditions. A first step in this procedure is the development of a dynamic model of the heat exchanger. In this work, a one-dimensional (1-D) control-oriented model of the PCHE was developed using the General Plant Analyzer and System Simulator (GPASS) code. GPASS is a transient simulation code that supports analysis and control of power conversion cycles based on the S-CO 2 Brayton cycle. This modeling capability was used this fiscal year to analyze experiment data obtained from the heat exchanger in the SNL recompression Brayton cycle. The analysis suggested that the error in the water flowrate measurement was greater than required for achieving precise control of heat removal rate. Accordingly, a new water flowmeter was installed, significantly improving the quality of the measurement. Comparison of heat exchanger measurements in subsequent experiments with code simulations yielded good agreement establishing a reliable basis for the use of the GPASS PCHE model for future development of a model-based feedback controller.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Achieving Higher Fidelity Pulsed-Power Simulations Using Advanced Gap Closure Modeling

This project has progressed several physics models in the EMPIRE plasma simulation code to achieve higher fidelity simulations of high-current diode operation in pulsed-power accelerators. In this report, we present details for the following major work products: (1) a set of verification problems covering all key processes involved in gap closure physics has been designed; this suite has facilitated feature vetting and overall model maturation, (2) a new EMPIRE exemplar has been developed: the Radiographic Integrated Test Stand 6 (RITS-6) diode, and (3) An exemplar for the Saturn accelerator exemplar was enabled by the models matured under this work to self-consistently simulate further into the diode pulse than previously possible (bipolar flow regime). These developments have lead to the highest confidence EMPIRE power flow predictions of the Saturn accelerator to date. Additionally, three modeling approaches for simulating electrode plasmas have been investigated. We report on these results and provide recommendations.

43 PARTICLE ACCELERATORS↗

The Validity of 21 cm Spin Temperature as a Kinetic Temperature Indicator in Atomic and Molecular Gas

The gas kinetic temperature ( T {sub K} ) of various interstellar environments is often inferred from observations that can deduce level populations of atoms, ions, or molecules using spectral line observations; H i 21 cm is perhaps the most widely used, and has a long history. Usually the H i 21 cm line is assumed to be in thermal equilibrium and the populations are given by the Boltzmann distribution. A variety of processes, many involving Ly α , can affect the 21 cm line. Here we show how this is treated in the spectral simulation code Cloudy, and present numerical simulations of environments where this temperature indicator is used, with a detailed treatment of the physical processes that determine level populations within H{sup 0}. We discuss situations where this temperature indicator traces T {sub K}, cases where it fails, as well as the effects of Ly α pumping on the 21 cm spin temperature. We also show that the Ly α excitation temperature rarely traces the gas kinetic temperature.

79 ASTRONOMY AND ASTROPHYSICS↗

Primordial Black Hole Dark Matter Simulations Using PopSyCLE

Abstract Primordial black holes (PBHs), theorized to have originated in the early Universe, are speculated to be a viable form of dark matter. If they exist, they should be detectable through photometric and astrometric signals resulting from gravitational microlensing of stars in the Milky Way. Population Synthesis for Compact-object Lensing Events, or PopSyCLE , is a simulation code that enables users to simulate microlensing surveys, and is the first of its kind to include both photometric and astrometric microlensing effects, which are important for potential PBH detection and characterization. To estimate the number of observable PBH microlensing events, we modify PopSyCLE to include a dark matter halo consisting of PBHs. We detail our PBH population model, and demonstrate our PopSyCLE + PBH results through simulations of the Optical Gravitational Lensing Experiment-IV (OGLE-IV) and Nancy Grace Roman Space Telescope (Roman) microlensing surveys. We provide a proof-of-concept analysis for adding PBHs into PopSyCLE , and thus include many simplifying assumptions, such as f DM , the fraction of dark matter composed of PBHs, and m ¯ PBH , mean PBH mass. Assuming m ¯ PBH = 30 M ⊙ , we find ∼3.6 f DM times as many PBH microlensing events than stellar evolved black hole events, a PBH average peak Einstein crossing time of ∼91.5 days, estimate on order of 10 2 f DM PBH events within the 8 yr OGLE-IV results, and estimate Roman to detect ∼1000 f DM PBH microlensing events throughout its planned microlensing survey.

79 ASTRONOMY AND ASTROPHYSICS↗

thornado+FLASH-X: A Hybrid Discontinuous Galerkin–Implicit-explicit and Finite-volume Framework for Neutrino-radiation Hydrodynamics in Core-collapse Supernovae

We present neutrino-transport algorithms implemented in the toolkit for high-order neutrino-radiation hydrodynamics (thornado) and their coupling to self-gravitating hydrodynamics within the adaptive mesh refinement–based multiphysics simulation framework FLASH-X. thornado, developed primarily for simulations of core-collapse supernovae (CCSNe), employs a spectral, six-species two-moment formulation with algebraic closure and special-relativistic observer corrections accurate to $\mathcal{O}(v/c)$, and uses discontinuous Galerkin (DG) methods for phase-space discretization combined with implicit-explicit time stepping. A key development is a nonlinear neutrino–matter coupling algorithm based on nested fixed-point iteration with Anderson acceleration, enabling fully implicit treatment of collisional processes, including energy-coupling interactions such as neutrino–electron scattering and pair production. Coupling to finite-volume (FV) hydrodynamics is achieved through a hybrid DG-FV representation of the fluid variables and operator-split evolution within FLASH-X. The implementation is verified using basic transport tests with idealized opacities and relaxation and deleptonization problems with tabulated microphysics. Spherically symmetric CCSN simulations demonstrate accuracy and robustness of the coupled scheme, including close agreement with the CCSN simulation code Chimera. An axisymmetric CCSN simulation further demonstrates the viability of DG-based neutrino transport for multidimensional supernova modeling within FLASH-X. thornado’s neutrino-transport solver is GPU-enabled using OpenMP offloading or OpenACC, and all CCSN applications included in this work use the GPU implementation. Together, these results establish a foundation for future enhancements in physics fidelity, numerical algorithms, and computational performance, for increasingly realistic large-scale CCSN simulations.

Endeve, Eirik [Oak Ridge National Laboratory (ORNL↗

A theory manual for multi-physics code coupling in LIME.

The Lightweight Integrating Multi-physics Environment (LIME) is a software package for creating multi-physics simulation codes. Its primary application space is when computer codes are currently available to solve different parts of a multi-physics problem and now need to be coupled with other such codes. In this report we define a common domain language for discussing multi-physics coupling and describe the basic theory associated with multiphysics coupling algorithms that are to be supported in LIME. We provide an assessment of coupling techniques for both steady-state and time dependent coupled systems. Example couplings are also demonstrated.

99 GENERAL AND MISCELLANEOUS↗

Toward a physics design for NDCX-II, an ion accelerator for warm dense matter and HIF target physics studies

The Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL), a collaborationof LBNL, LLNL, and PPPL, has achieved 60-fold pulse compression of ion beams on the Neutralized Drift Compression eXperiment (NDCX) at LBNL. In NDCX, a ramped voltage pulse from an induction cell imparts a velocity"tilt" to the beam; the beam's tail then catches up with its head in a plasma environment that provides neutralization. The HIFS-VNL's mission is to carry out studies of Warm Dense Matter (WDM) physics using ion beams as the energy source; an emerging thrust is basic target physics for heavy ion-driven Inertial Fusion Energy (IFE). These goals require an improved platform, labeled NDCX-II. Development of NDCX-II at modest cost was recently enabled by the availability of induction cells and associated hardware from the decommissioned Advanced Test Accelerator (ATA) facility at LLNL. Our initial physics design concept accelerates a ~;;30 nC pulse of Li+ ions to ~;;3 MeV, then compresses it to ~;;1 ns while focusing it onto a mm-scale spot. It uses the ATA cells themselves (with waveforms shaped by passive circuits) to impart the final velocity tilt; smart pulsers provide small corrections. The ATA accelerated electrons; acceleration of non-relativistic ions involves more complex beam dynamics both transversely and longitudinally. We are using analysis, an interactive one-dimensional kinetic simulation model, and multidimensional Warp-code simulations to develop the NDCX-II accelerator section. Both LSP and Warp codes are being applied to the beam dynamics in the neutralized drift and final focus regions, and the plasma injection process. The status of this effort is described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toward a physics design for NDCX II, an ion accelerator for warm dense matter and HIF target physics studies

The Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL), a collaboration of LBNL, LLNL, and PPPL, has achieved 60-fold pulse compression of ion beams on the Neutralized Drift Compression eXperiment (NDCX) at LBNL. In NDCX, a ramped voltage pulse from an induction cell imparts a velocity 'tilt' to the beam; the beam's tail then catches up with its head in a plasma environment that provides neutralization. The HIFS-VNL's mission is to carry out studies of warm dense matter (WDM) physics using ion beams as the energy source; an emerging thrust is basic target physics for heavy ion-driven inertial fusion energy (IFE). These goals require an improved platform, labeled NDCX-II. Development of NDCX-II at modest cost was recently enabled by the availability of induction cells and associated hardware from the decommissioned advanced test accelerator (ATA) facility at LLNL. Our initial physics design concept accelerates an {approx} 30 nC pulse of Li{sup +} ions to {approx} 3 MeV, then compresses it to {approx} 1 ns while focusing it onto a mm-scale spot. It uses the ATA cells themselves (with waveforms shaped by passive circuits) to impart the final velocity tilt; smart pulsers provide small corrections. The ATA accelerated electrons; acceleration of non-relativistic ions involves more complex beam dynamics both transversely and longitudinally. We are using an interactive one-dimensional kinetic simulation model and multidimensional Warp-code simulations to develop the NDCX-II accelerator section. Both LSP and Warp codes are being applied to the beam dynamics in the neutralized drift and final focus regions, and the plasma injection process. The status of this effort is described.

43 PARTICLE ACCELERATORS↗

A Study of Physics-Informed Deep Learning for System Fluid Dynamics Closures

The sub-grid-scale (SGS) physics models, or so-called closure relations (CR), are essential in thermal-fluid modeling and simulation codes, ranging from large-eddy simulation to system-level thermo-fluid dynamic problems. While details vary, all thermo-fluid codes solve coupled mass-momentum-energy conservation partial differential equations (PDE). Traditionally, the analytical form of closure models has to be known, and then we calibrate the model using data from a set of applicable experiments. Characteristically, it takes long effort to gain insights and mechanistic understanding needed for developing closure models. Such a model is a compact form of data. The long time required for new model development limits the pace of model application while dealing with new geometries, new coolants or system conditions, particularly in newly designed systems. Alternative to mechanistic and semi-analytical models, it is possible to discover the pattern of closure relations by applying the modern machine learning methods to the body of relevant experimental data. Deep learning (DL) is a relatively new branch in the machine learning family, and a major breakthrough has been achieved since Hinton introduces a fast algorithm to efficiently train a feed-forward neural network (NN) with multilayer perceptrons. Generally, any NN with more than two layers is considered as deep learning, and it contains a large number of hyper-parameters to achieve pattern recognition or regression for complex datasets. Hornik shows that multilayer NN is compatible with universal approximation theorem. There is no constraint for a multilayer NN to capture the properties of any measurable information. This capability makes DL attractive for closure models in a system thermal-hydraulic code. As system geometry and/or operating conditions change, new physical experiments (increasingly sophisticated) are conducted to support evaluation and revision of closure models. Such a so-called data-driven modeling relaxes the structural form of system codes to directly assimilate data instead of hard-wiring the model to pre-calibrated correlations. The objective of this research is to enable cost-effective development of a DL-based closure that reflects the data. The previous work on applying machine learning techniques to fluid dynamics focused on statistical learning with basic NN from direct numerical simulations (DNS) dataset. In the present work, we show that DL-based closure models can cause the fluid calculation to diverge if multilayer NN is used. To address the issue, we investigate conditions by which the DL-based closure models work compatibly, stably, and effectively with PDE-constrained forward prediction problems. Optimally meeting the compatibility conditions constitutes a physics-informed deep learning (PIDL) strategy. We refer to this process as PDE-constrained machine learning or PDE-ML. To develop the technical basis for PDE-ML using DL-based fluid dynamics closure, numerical experiments are performed for manufactured problems of increasing complexity. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Beam Optics Studies for Larger Beampipe Diameters for the LAMP-PSR

The proposed beampipe diameter increase of the PSR beamlines for the LAMP PSR upgrade is expected decrease beam loss due to tuning errors and misalignment. However, a larger beampipe diameter would require increasing the pole-to-pole gap height within all magnets in the PSR (dipole gap, quadrupole bore, etc.). This would in turn affect the extent and profile of the fringe fields at the ends of the magnets, altering the effective length of the magnets and thus the magnetic optics. In this work, we used the simulation code MAD-X to model the PSR lattice for different beampipe diameters. The results of these simulations will be later used to benchmark particle simulations using the code pyORBIT. The MAD-X simulations are described, and the simulation results are discussed in this technote.

43 PARTICLE ACCELERATORS↗

The AGORA High-resolution Galaxy Simulations Comparison Project. IV. Halo and Galaxy Mass Assembly in a Cosmological Zoom-in Simulation at z ≤ 2

In this fourth paper from the AGORA Collaboration, we study the evolution down to redshift z = 2 and below of a set of cosmological zoom-in simulations of a Milky Way mass galaxy by eight of the leading hydrodynamic simulation codes. We also compare this CosmoRun suite of simulations with dark matter-only simulations by the same eight codes. We analyze general properties of the halo and galaxy at z = 4 and 3, and before the last major merger, focusing on the formation of well-defined rotationally supported disks, the mass–metallicity relation, the specific star formation rate, the gas metallicity gradients, and the nonaxisymmetric structures in the stellar disks. Codes generally converge well to the stellar-to-halo mass ratios predicted by semianalytic models at z ~ 2. We see that almost all the hydro codes develop rotationally supported structures at low redshifts. Most agree within 0.5 dex with the observed mass–metallicity relation at high and intermediate redshifts, and reproduce the gas metallicity gradients obtained from analytical models and low-redshift observations. We confirm that the intercode differences in the halo assembly history reported in the first paper of the collaboration also exist in CosmoRun, making the code-to-code comparison more difficult. We show that such differences are mainly due to variations in code-dependent parameters that control the time stepping strategy of the gravity solver. We find that variations in the early stellar feedback can also result in differences in the timing of the low-redshift mergers. All the simulation data down to z = 2 and the auxiliary data will be made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

BEPAM-E Model Code and CABBI Simulation Results for "Repeal of the Clean Power Plan: Social Cost and Distributional Implications"

The dataset consists of results and various input data that are used in the GAMS model for the publication "Repeal of the Clean Power Plan: Social Cost and Distributional Implications". All the data are either excel files or in the .inc format which can be read within GAMS or Notepad. Main data sources include: agriculture, transportation and electricity data. Model details can be found in the paper and the GAMS model package.

carbon abatement↗

Inclusion of Scatter in HADES: Final Report

Covert nuclear attack is one of the foremost threats facing the United States and is a primary focus of the War on Terror. The Domestic Nuclear Detection Office (DNDO), within the Department of Homeland Security (DHS), is chartered to develop, and improve domestic systems to detect and interdict smuggling for the illicit use of a nuclear explosive device, fissile material or radiologica1 material. The CAARS (Cargo Advanced Automated Radiography System) program is a major part of the DHS effort to enhance US security by harnessing cutting-edge technologies to detect radiological and nuclear threats at points of entry to the United States. DNDO has selected vendors to develop complete radiographic systems. It is crucial that the initial design and testing concepts for the systems be validated and compared prior to the substantial efforts to build and deploy prototypes and subsequent large-scale production. An important aspect of these systems is the scatter which interferes with imaging. Monte Carlo codes, such as MCNP (X-5 Monte Carlo Team, 2005 Revision) allow scatter to be calculatied, but these calculations are very time consuming. It would be useful to have a fast scatter estimation algorithm in a fast ray tracing code. We have been extending the HADES ray-tracing radiographic simulation code to model vendor systems in a flexible and quick fashion and to use this tool to study a variety of questions involving system performance and the comparative value of surrogates. To enable this work, HADES has been linked to the BRL-CAD library (BRL-CAD Open Source Project, 2010), in order to enable the inclusion of complex CAD geometries in simulations, scanner geometries have been implemented in HADES, and the novel detector responses have been included in HADES. A major extension of HADES which has been required by this effort is the inclusion of scatter in these radiographic simulations. Ray tracing codes generally do not easily allow the inclusion of scatter, because these codes define a source and a grid of detector pixels and only compute the attenuation along rays between these points. Scatter is an extremely complex set of processes which can involve rays which change directions many times between the source and detector. Scatter from outside the field of view of the imaging system, as well as within the field of view, can have an important role in image formation. In this report, we will describe how we implemented a treatment of scatter in HADES. We begin with a discussion of how we define scatter in Section 2, followed by a description of how single Compton scatter is now included in HADES in Section 3. In Section 4 we report a set of verification tests against MCNP and tests of how the technique scales with image size, number of scatters allowed and number of processors used in the calculations. In Section 5, we describe how we plan to extend this approach to other forms of scatter and conclude in Section 6. It should be emphasized that the purpose of this report is to show that a form of scatter has been implemented in HADES and has been verified against MCNP. Validation, the process of comparing simulation and experiment, is a future task.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗