Search NASA⌕ Search

SEARCH · Search NASA

Results for “state variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Perturbation guidance for minimum time flight paths of spacecraft.

The problem of transferring a rocket vehicle from a given circular orbit to a larger coplanar circular orbit in minimum time, using a constant low-thrust rocket engine, is considered. Parameters are chosen to correspond to a transfer from the earth's orbit in heliocentric space to the orbit of Mars. A path satisfying the first order necessary conditions of variational calculus is shown to be locally minimizing by application of a set of second order conditions. A physical explanation is offered to justify the retrothrust period occurring during the flight. A neighboring optimum feedback control law, based on estimated time-to-go, is applied to this problem. State variable and terminal constraint feedback gains are calculated while one of the second order conditions, involving the backward integration of a matrix Riccati equation, is being tested.

Wood, L. J.↗
NASA NTRS1972

N-burn optimal analytic trajectories.

Derivation of N-burn analytic solutions for propellant-optimal transfer trajectories of a vehicle in a vacuum between arbitrary boundary conditions. Variational changes in the desired boundary conditions are expressed, in general, in terms of variational changes in the control vector and in the initial state vector. All coefficient matrices are computed recursively in terms of the analytic matrices established from the subarcs of the N-burn solution. The solution is applicable to shuttle ascent (exoatmospheric), rendezvous, and deorbit problems. Consideration is also given to state-variable and control-variable inequality constraints.

Jezewski, D. J.↗
NASA NTRS1972

Space Shuttle landing navigation using precision distance measuring equipment.

Precision distance measuring equipment (DME) aiding onboard inertial navigation can be used to meet the stringent landing navigation requirements of the Space Shuttle. The required accuracy is achieved by using a ten-state-variable Kalman filter to process the measured range and delta-range data from the DME. The DME transponders are required to meet the accuracy requirements: two are deployed under the final approach path and one is deployed to the side. Failure considerations require deployment of additional redundant transponders. Initialization of the landing navigation after hypersonic entry is accomplished using the transponders at the airport.

Widnall, W. S.↗
NASA NTRS1972

On the decomposition of a dynamical system into non-interacting subsystems.

It is shown that, under rather general conditions, it is possible to formally decompose the dynamics of an n-dimensional dynamical system into a number of non-interacting subsystems. It is shown that these decompositions are in general not simply related to the kinds of observational procedures in terms of which the original state variables of the system are defined. Some consequences of this construction for reductionism in biology are discussed.

Rosen, R.↗
NASA NTRS1973

Evaluation of glide paths for landing a VTOL airplane using linear regulator theory.

A method of evaluating certain characteristics of approach paths for VTOL airplanes is presented which is based on the solution of the matrix Riccati equation to obtain an optimal state variable feedback controller. The longitudinal equations of motion of the airplane are linearized about a preselected path and the resulting system of equations is treated as a linear, time-varying regulator. The controller which minimizes a quadratic cost function is applied to the linearized system to determine the airplane's ability to return to the prescribed path given a specified initial error in altitude. The procedure is applied to the XC-142A, tilt-wing, V/STOL airplane, under decelerating approach conditions with a glide path consisting of two segments, the first having a smaller angle of descent than the second.

Reid, G. F.↗
NASA NTRS1973

State space approach to mixed boundary value problems.

A state-space procedure for the formulation and solution of mixed boundary value problems is established. This procedure is a natural extension of the method used in initial value problems; however, certain special theorems and rules must be developed. The scope of the applications of the approach includes beam, arch, and axisymmetric shell problems in structural analysis, boundary layer problems in fluid mechanics, and eigenvalue problems for deformable bodies. Many classical methods in these fields developed by Holzer, Prohl, Myklestad, Thomson, Love-Meissner, and others can be either simplified or unified under new light shed by the state-variable approach. A beam problem is included as an illustration.

Chen, C. F.↗
NASA NTRS1973

Suboptimal design of a class of nonlinear controllers.

A systematic design procedure is presented for suboptimal nonlinear controller synthesis. Such a control yields faster response characteristics than are normally possible with a linear controller. The technique is geared to single-input linear systems where excursions of one state variable are of more importance than others. Design steps are formulated in terms of readily applicable algebraic equations. The proposed method is applied to several design examples and the advantages are shown by comparison with the results obtained from existing techniques.

Rouse, W. B.↗
NASA NTRS1973

Decoupling in linear time-varying multivariable systems

The necessary and sufficient conditions for the decoupling of an m-input, m-output, linear time varying dynamical system by state variable feedback is described. The class of feedback matrices which decouple the system are illustrated. Systems which do not satisfy these results are described and systems with disturbances are considered. Some examples are illustrated to clarify the results.

Sankaran, V.↗
NASA NTRS1973

Automatic control of a helicopter with a hanging load

An autopilot logic is designed here for controlling a helicopter with a hanging load. A 16th order model for the system is decoupled into four subsystems: (1) a second order system for yawing motion, (2) a second order system for vertical motion, (3) a sixth order system for longitudinal motion, and (4) a sixth order system for lateral motion. A measuring scheme, which could be used in remote areas, is developed and filters are designed to estimate the state variables from these measurements. The autopilot can be used to move the load over short distances without retracting the cables. This is done by automatically shifting the autopilot modes from position-hold (hover) to acceleration-hold to velocity-hold (cruise) to deceleration-hold to velocity-hold (near hover) to position-hold (hover). Use of such an autopilot might save considerable turnaround time. The Sikorsky S-61 helicopter is chosen as an example vehicle. The performance of the controlled system is studied in the presence of longitudinal and lateral winds.

Gupta, N. K.↗
NASA NTRS1973

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations (identification of lifting rotor system parameters from transient response data), Phase 7-B

System identification methods have been applied to rotorcraft to estimate stability derivatives from transient flight control response data. While these applications assumed a linear constant coefficient representation of the rotorcraft, the computer experiments used transient responses in flap-bending and torsion of a rotor blade at high advance ratio which is a rapidly time varying periodic system. It was found that a simple system identification method applying a linear sequential estimator also called least square estimator or equation of motion estimator, is suitable for this periodic system and can be used directly if only the acceleration data are noise polluted. In the case of noise being present also in the state variable data the direct application of the estimator gave poor results.

Hohenemser, K. H.↗
NASA NTRS1974

Display requirements for the final approach and landing phase of an RPV mission

A two part investigation was conducted to determine the display requirements for the final approach and landing phase of a remotely piloted vehicle (RPV) mission, and to assess the relative merits of several possible display configurations. The objective of the first part of the investigation was to obtain subjective assessments of several display configurations, and to select the most promising display concepts for subsequent evaluation in terms of performance measures. A basic display consisting of a perspective image of terrain and runway, a horizon bar and an aircraft symbol was used, and guidance symbology was added to the basic displaying selected state variables. Initial results suggested that as guidance symbology is added to the basic display, pilot acceptance tends to increase. A point of diminishing returns is eventually reached, however, when additional information produces too much clutter, and makes it difficult for the pilot to process the displayed information.

Howard, J. C.↗
NASA NTRS1974

Computer experiments in preparation of system identification from transient rotor model tests, part 2

System identification methods which can extract model rotor paramenters with reasonable accuracy from noise polluted blade flapping transient measurements were developed. Usually parameter identification requires data on the state variables, that is on deflections and on rate of deflections. The small size of rotor models makes it, however, difficult to measure more than the blade flapping deflections. For the computer experiments it was, therefore, assumed that only noisy deflection measurements are available. Parameter identifications were performed for one and two unknown parameters. Both rotating coordinates and multiblade coordinates were used. It was found that data processing with a digital filter allowed by numerical differentiation a sufficiently accurate determination of the rates of deflection and of the accelerations to obtain reasonable parameter estimates with a simple linear estimator.

Hohenemser, K. H.↗
NASA NTRS1974

Computer experiments on periodic systems identification using rotor blade transient flapping-torsion responses at high advance ratio

Computer experiments are described which used transient responses in flap-bending and torsion of a rotor blade at high advance ratio. It was found that a simple system identification method applying a linear sequential estimator also called equation of motion estimator, is suitable for this periodic system and can be used directly, if only the acceleration data are noise-polluted. In the case where noise is also present in the state-variable data, the direct application of the estimator gave poor results. However after prefiltering the data with a digital Graham filter having a cutoff frequency above the natural blade torsion frequency, the linear sequential estimator successfully recovered the parameters of the periodic coefficient analytical model.

Hohenemser, K. H.↗
NASA NTRS1974

Shuttle ascent trajectory optimization with function space quasi-Newton techniques

A Space Shuttle ascent trajectory optimization problem from lift-off to orbital insertion is solved with a function space version of a quasi-Newton parameter optimization method developed by Broyden. The problem includes five parameter and one bounded-function controls, two state-variable constraints, and four terminal conditions. The bounded controls are treated directly, while the remaining constraints are adjoined to the performance index (maximum payload) with penalty functions. The problem is formulated as a four-phase variational problem (liftoff, pitch-over, gravity-turn, linear tangent steering), and the appropriate gradients are developed by first variation theory. A projection operator is introduced to aid in the interpretation of the algorithm with mixed parameter and function controls.

Edge, E. R.↗
NASA NTRS1973

Application of modern control theory to the design of optimum aircraft controllers

A procedure is described for synthesis of optimal aircraft control systems by application of the concepts of optimal control theory to time-invariant linear systems with quadratic performance criteria. Essential in this synthesis procedure is the solution of the Riccati matrix equation which results in a constant linear feedback control law for an output regulator which maintains a plant in an equilibrium in the presence of impulse disturbances. An algorithm is derived for designing maneuverable output regulators with selected state variables for feedback.

Power, L. J.↗
NASA NTRS1974

Discrete optimal control approach to a four-dimensional guidance problem near terminal areas

Description of a computer-oriented technique to generate the necessary control inputs to guide an aircraft in a given time from a given initial state to a prescribed final state subject to the constraints on airspeed, acceleration, and pitch and bank angles of the aircraft. A discrete-time mathematical model requiring five state variables and three control variables is obtained, assuming steady wind and zero sideslip. The guidance problem is posed as a discrete nonlinear optimal control problem with a cost functional of Bolza form. A solution technique for the control problem is investigated, and numerical examples are presented. It is believed that this approach should prove to be useful in automated air traffic control schemes near large terminal areas.

Nagarajan, N.↗
NASA NTRS1974

Optimal control theory investigation of proprotor/wing response to vertical gust

Optimal control theory is used to design linear state variable feedback to improve the dynamic characteristics of a rotor and cantilever wing representing the tilting proprotor aircraft in cruise flight. The response to a vertical gust and system damping are used as criteria for the open and closed loop performance. The improvement in the dynamic characteristics achievable is examined for a gimballed rotor and for a hingeless rotor design. Several features of the design process are examined, including: (1) using only the wing or only the rotor dynamics in the control system design; (2) the use of a wing flap as well as the rotor controls for inputs; (3) and the performance of the system designed for one velocity at other forward speeds.

Frick, J. K. D.↗
NASA NTRS1975

Techniques for trajectory optimization using a hybrid computer

The use of a hybrid computer in the solution of trajectory optimization problems is described. The solution technique utilizes the indirect method and requires iterative computation of the initial condition vector of the co-state variables. Convergence of the iteration is assisted by feedback switching and contour modification. A simulation of the method in an on-line updating scheme is presented.

Neely, P. L.↗