Search NASA⌕ Search

SEARCH · Search NASA

Results for “strain effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Ignition, Burning, and Extinction of a Strained Fuel Strip

Flame structure and ignition and extinction processes associated with a strained fuel strip are explored numerically using detailed transport and complex kinetics for a propane-air reaction. Ignition modes are identified that are similar to those predicted by one-step activation energy asymptotics, i.e., modes in which diffusion flames can ignite as independent or dependent interfaces, and modes in which single premixed or partially premixed flames ignite. These ignition modes are found to be dependent on critical combinations of strain rate, fuel strip thickness, and initial reactant temperatures. Extinction in this configuration is seen to occur due to fuel consumption by adjacent flames, although viscosity is seen to have the effect of delaying extinction by reducing the effective strain rate and velocity field experienced by the flames.

Selerland, T.↗

The role of temperature on defect diffusion and nanoscale patterning in graphene

Graphene is of great scientific interest due to a variety of unique properties such as ballistic transport, spin selectivity, the quantum hall effect, and other quantum properties. Nanopatterning and atomic scale modifications of graphene are expected to enable further control over its intrinsic properties, providing ways to tune the electronic properties through geometric and strain effects, introduce edge states and other local or extended topological defects, and sculpt circuit paths. The focused beam of a scanning transmission electron microscope (STEM) can be used to remove atoms, enabling milling, doping, and deposition. Utilization of a STEM as an atomic scale fabrication platform is increasing; however, a detailed understanding of beam-induced processes and the subsequent cascade of aftereffects is lacking. Here, we examine the electron beam effects on atomically clean graphene at a variety of temperatures ranging from 400 to 1000 °C. We find that temperature plays a significant role in the milling rate and moderates competing processes of carbon adatom coalescence, graphene healing, and the diffusion (and recombination) of defects. The results of this work can be applied to a wider range of 2D materials and introduce better understanding of defect evolution in graphite and other bulk layered materials.

36 MATERIALS SCIENCE↗

New approaches for achieving more perfect transition metal oxide thin films

This perspective considers the enormous promise of epitaxial functional transition metal oxide thin films for future applications in low power electronic and energy applications since they offer wide-ranging and highly tunable functionalities and multifunctionalities, unrivaled among other classes of materials. It also considers the great challenges that must be overcome for transition metal oxide thin films to meet what is needed in the application domain. These challenges arise from the presence of intrinsic defects and strain effects, which lead to extrinsic defects. Current conventional thin film deposition routes often cannot deliver the required perfection and performance. Since there is a strong link between the physical properties, defects and strain, routes to achieving more perfect materials need to be studied. Several emerging methods and modifications of current methods are presented and discussed. The reasons these methods better address the perfection challenge are considered and evaluated.

36 MATERIALS SCIENCE↗

Reverse-Engineering Strain in Nanocrystallites by Tracking Trimerons

Although strain underpins the behavior of many transition-oxide-based magnetic nanomaterials, it is elusive to quantify. Since the formation of orbital molecules is sensitive to strain, a metal–insulator transition should be a window into nanocrystallite strain. Using three sizes of differently strained Fe 3 O 4 polycrystalline nanorods, the impact of strain on the Verwey transition and the associated formation and dissolution processes of quasiparticle trimerons is tracked. In 40 and 50 nm long nanorods, increasing isotropic strain results in Verwey transitions going from T V ≈ 60 K to 20 K. By contrast, 700 nm long nanorods with uniaxial strain along the (110) direction have T V ≈ 150 K—the highest value reported thus far. A metal–insulator transition, like T V in Fe 3 O 4 , can be used to determine the effective strain within nanocrystallites, thus providing new insights into nanoparticle properties and nanomagnetism.

36 MATERIALS SCIENCE↗

Ordering in GaAs co-doped with Bi and N

Introducing only a few atomic percent of Bi or N in GaAs has a large effect on the band gap of the material. Specifically Bi doped GaAs shows potential for local band gap engineering in optoelectronic applications. The incorporation of Bi and N into GaAs is difficult due to strain effects. In this work we study the ordering of these dopants at the atomic scale in order to get a better understanding of the behavior of these dopants in the host lattice. Cross-sectional scanning tunneling microscopy is used to find the exact position of Bi and N dopants in the GaAs matrix, allowing us to study both their nearest neighbor pair occurrences and pair correlation functions. An attractive interaction between Bi dopants at short ranges (1-2 nm) is found and a similar effect is observed between N dopants. Here, we find a repulsive interaction with a similar length scale between Bi and N dopants. A similar repulsion is found in the Bi-N nearest neighbor pairs. Density functional theory is used to calculate the different nearest neighbor pair energies and test these results to the experimental pair occurrences. It is concluded from the experimental and theoretical results that the growth conditions and N inclusion greatly affects the Bi distribution in GaAs.

36 MATERIALS SCIENCE↗

Effect of Static Strains on Diffusion

A theory is developed that gives the diffusion coefficient in strained systems as an exponential function of the strain. This theory starts with the statistical theory of the atomic jump frequency as developed by Vineyard. The parameter determining the effect of strain on diffusion is related to the changes in the inter-atomic forces with strain. Comparison of the theory with published experimental results for the effect of pressure on diffusion shows that the experiments agree with the form of the theoretical equation in all cases within experimental error.

Girifalco, L. A.↗

Distributed Fiber Optic Sensing for in-well hydraulic fracture monitoring

This study presents the results from in-well hydraulic fracture monitoring within a horizontal well in an unconventional reservoir utilizing Distributed Fiber Optic Sensing (DFOS). An in-house-developed Brillouin-based Distributed Strain Sensing (DSS) interrogator was deployed to obtain strain measurements, complemented by a commercial Raman-based Distributed Temperature Sensing (DTS) interrogator for temperature measurements and a commercial Rayleigh-based Low-Frequency Distributed Acoustic Sensing (LF-DAS) interrogator for strain-rate measurements. Examined over a ten-day period, the spatio-temporal distribution of temperature-compensated strain obtained from DSS and DTS revealed distinct signatures of the multi-stage hydraulic fracturing process. These signatures were analyzed with respect to fracture width growth and closure, residual strain effects, and fracture conductivity near the wellbore. Fracture widths within the fracture zone were estimated for individual stages. The findings were assessed with LF-DAS measurements for further evaluation. This work integrates DFOS-measured strain, temperature, and strain-rate data for monitoring in-well hydraulic fracturing, with the goal of supporting future studies in interpreting DFOS measurements for improved understanding of hydraulic fracturing in unconventional reservoirs.

58 GEOSCIENCES↗

Dissolution Kinetics of Epitaxial Cadmium Carbonate Overgrowths on Dolomite

Thin films grown on mineral surfaces can immobilize toxic metals in natural systems, but the effects of epitaxy and film thickness on dissolution rates of the overgrowth are typically unknown. To explore these effects, otavite (CdCO 3 ) films were grown on dolomite (104) surfaces from aqueous solutions containing [Cd] = [Ca] = [CO 3 ] = 0.2 mM for 1–48 h and then dissolved in deionized water. Films of various thicknesses and strain states were obtained by varying the growth reaction time. Growth for up to 3 h produced strained thin films with Cd coverages of <4.3 ± 0.6 equivalent monolayers (ML) (corresponding to a thickness of up to 17 Å), whereas reaction times of up to 48 h produced thicker films with as many as 114 ± 14 equivalent ML of Cd. Intrinsic dissolution rates were measured as a function of otavite film thickness by a combination of synchrotron X-ray fluorescence, specular X-ray reflectivity, and atomic force microscopy. As a result, the initial dissolution rates for unstrained films were comparable to those reported for synthetic otavite powders, whereas the thinnest films (<3.1 ± 1.1 ML) dissolved at a 50% slower rate, indicating that epitaxial strain effectively enhanced their stability. We discuss potential reasons for this difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong increase in superconducting T{sub c} for Nb{sub 2}InC under compressive strain

Using first-principles, we investigate strain effects on the phonon spectrum, heat capacity C{sub V}, Debye temperature θ{sub D}, and electron-phonon coupling of Nb{sub 2}InC. It finds that its heat capacity increases and Debye temperature decreases as strain increases. Analysis of the phonon spectrum and Eliashberg spectral function shows that the superconductivity of Nb{sub 2}InC mainly originates from C vibrations parallel to and Nb vibrations perpendicular to the Nb{sub 2}InC layers. A significant enhancement of the superconducting transition temperature T{sub c} up to 25.98 K is observed at η = −10% due to an increase of In atomic vibrations under strain. These results provide a means of tuning the superconducting properties of Nb{sub 2}InC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling of magnetic field and lattice strain and its impact on electronic phase separation in La{sub 0.335}Pr{sub 0.335}Ca{sub 0.33}MnO{sub 3}/ferroelectric crystal heterostructures

Phase-separated La{sub 0.335}Pr{sub 0.335}Ca{sub 0.33}MnO{sub 3} films were epitaxially grown on (001)- and (111)-oriented ferroelectric single-crystal substrates. Upon poling along the [001] or [111] direction, dramatic decrease in resistance, up to 99.98%, and complete melting of the charge-ordered phase were observed, caused by poling-induced strain rather than accumulation of electrostatic charge at interface. Such poling-induced strain effects can be effectively tuned by a magnetic field and mediated by electronic phase separation. In particular, our findings show that the evolution of the strength of electronic phase separation against temperature and magnetic field can be determined by measuring the strain-tunability of resistance [(ΔR/R){sub strain}] under magnetic fields.

36 MATERIALS SCIENCE↗

Strain-engineering the anisotropic electrical conductance in ReS{sub 2} monolayer

Rhenium disulfide (ReS{sub 2}) is a semiconducting layered transition metal dichalcogenide that exhibits a stable distorted 1 T (Re in octahedral coordination) phase. The reduced symmetry in ReS{sub 2} leads to in-plane anisotropy in various material properties. In this work, we performed a comprehensive first-principle computational study of strain effect on the anisotropic mechanical and electronic properties of ReS{sub 2} monolayers. We found that the anisotropic ratio in electron mobility along two principle axes is 2.36 while the ratio in hole mobility reaches 7.76. The study of strain applied along different directions shows that the elastic modulus is largest for out-of-plane direction, and the strain along a-direction induces indirect bandgap while strain along b- or c-direction does not. In addition, the carrier mobility can be significantly improved by the c-direction tensile strain. This study indicates that the ReS{sub 2} monolayer has promising applications in nanoscale strain sensor and conductance-switch FETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman Scattering in InSb Spherical Nanocrystals Ion-Synthesized in Silicon-Oxide Films

The Raman spectra of SiO{sub 2} films containing InSb spherical nanocrystals produced by ion-beam synthesis are studied. TO- and LO-like modes in the spectra of the InSb nanocrystals are detected at frequencies of 187 and 195 cm{sup –1}, respectively. The shift of these modes to high frequencies with respect to the corresponding frequencies in InSb bulk crystals is analyzed from the viewpoint of the influence of the quantum-confinement effect, strains in nanocrystals, the surface phonon frequency, and scattering at the frequency corresponding to stretched anion–cation modes at the surface of polar spherical nanocrystals. The position of the 195-cm{sup –1} mode corresponds to LO phonons in InSb nanocrystals hydrostatically compressed in the SiO{sub 2} matrix at pressures of about 10 kbar. The 187-cm{sup –1} mode corresponds to resonance at the Fröhlich frequency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanism for enhanced oxygen reduction kinetics at the (La,Sr)CoO 3–δ /(La,Sr) 2 CoO 4+δ hetero-interface

The recently reported fast oxygen reduction kinetics at the interface of (La,Sr)CoO 3–δ (LSC 113 ) and (La,Sr) 2 CoO 4+δ (LSC 214 ) phases opened up new questions for the potential role of dissimilar interfaces in advanced cathodes for solid oxide fuel cells (SOFCs). Using first-principles based calculations in the framework of density functional theory, we quantitatively probed the possible mechanisms that govern the oxygen reduction activity enhancement at this hetero-interface as a model system. Our findings show that both the strongly anisotropic oxygen incorporation kinetics on the LSC 214 and the lattice strain in the vicinity of the interface are important contributors to such enhancement. The LSC 214 (100) surface exposed to the ambient at the LSC 113 /LSC 214 interface facilitates oxygen incorporation because the oxygen molecules very favorably adsorb onto it compared to the LSC 214 (001) and LSC 113 (001) surfaces, providing a large source term for oxygen incorporation. Lattice strain field present near the hetero-interface accelerates oxygen incorporation kinetics especially on the LSC 113 (001) surface. At 500 °C, 4 × 10 2 times faster oxygen incorporation kinetics are predicted in the vicinity of the LSC 113 /LSC 214 hetero-interface with 50% Sr-doped LSC 214 compared to that on the single phase LSC 113 (001) surface. Contributions from both the anisotropy and the local strain effects are of comparable magnitude. Furthermore, the insights obtained in this work suggest that hetero-structures, which have a large area of (100) surfaces and smaller thickness in the [001] direction of the Ruddlesden–Popper phases, and larger tensile strain near the interface would be promising for high-performance cathodes.

(La,Sr)2CoO4+δ↗

Thermal effects on the Raman phonon of few-layer phosphorene

Two-dimensional phosphorene is a promising channel material for next generation transistor applications due to its superior carrier transport property. Here, we report the influence of thermal effects on the Raman phonon of few-layer phosphorene formed on hafnium-dioxide (HfO{sub 2}) high-k dielectric. When annealed at elevated temperatures (up to 200 °C), the phosphorene film was found to exhibit a blue shift in both the out-of-plane (A{sup 1}{sub g}) and in-plane (B{sub 2g} and A{sup 2}{sub g}) phonon modes as a result of compressive strain effect. This is attributed to the out-diffusion of hafnium (Hf) atoms from the underlying HfO{sub 2} dielectric, which compresses the phosphorene in both the zigzag and armchair directions. With a further increase in thermal energy beyond 250 °C, strain relaxation within phosphorene eventually took place. When this happens, the phosphorene was unable to retain its intrinsic crystallinity prior to annealing, as evident from the broadening of full-width at half maximum of the Raman phonon. These results provide an important insight into the impact of thermal effects on the structural integrity of phosphorene when integrated with high-k gate dielectric.

36 MATERIALS SCIENCE↗

Strain-induced creation and switching of anion vacancy layers in perovskite oxynitrides

Perovskite oxides can host various anion-vacancy orders, which greatly change their properties, but the order pattern is still difficult to manipulate. Separately, lattice strain between thin film oxides and a substrate induces improved functions and novel states of matter, while little attention has been paid to changes in chemical composition. Here we combine these two aspects to achieve strain-induced creation and switching of anion-vacancy patterns in perovskite films. Epitaxial SrVO 3 films are topochemically converted to anion-deficient oxynitrides by ammonia treatment, where the direction or periodicity of defect planes is altered depending on the substrate employed, unlike the known change in crystal orientation. First-principles calculations verified its biaxial strain effect. Like oxide heterostructures, the oxynitride has a superlattice of insulating and metallic blocks. Given the abundance of perovskite families, this study provides new opportunities to design superlattices by chemically modifying simple perovskite oxides with tunable anion-vacancy patterns through epitaxial lattice strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-dependent mechanical properties of single-layer molybdenum disulphide: Molecular dynamics nanoindentation simulations

The temperature-dependent mechanical properties of single-layer molybdenum disulphide (MoS{sub 2}) are obtained using molecular dynamics (MD) nanoindentation simulations. The Young's moduli, maximum load stress, and maximum loading strain decrease with increasing temperature from 4.2 K to 500 K. The obtained Young's moduli are in good agreement with those using our MD uniaxial tension simulations and the available experimental results. The tendency of maximum loading strain with different temperature is opposite with that of metal materials due to the short range Stillinger-Weber potentials in MoS{sub 2}. Furthermore, the indenter tip radius and fitting strain effect on the mechanical properties are also discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗