Search NASA⌕ Search

SEARCH · Search NASA

Results for “subsurface data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Sample Return from Ancient Hydrothermal Springs

Hydrothermal spring deposits on Mars would make excellent candidates for sample return. Molecular phylogeny suggests that that life on Earth may have arisen in hydrothermal settings [1-3], and on Mars, such settings not only would have supplied energy-rich waters in which martian life may have evolved [4-7] but also would have provided warm, liquid water to martian life forms as the climate became colder and drier [8]. Since silica, sulfates, and clays associated with hydrothermal settings are known to preserve geochemical and morphological remains of ancient terrestrial life [9-11], such settings on Mars might similarly preserve evidence of martian life. Finally, because formation of hydrothermal springs includes surface and subsurface processes, martian spring deposits would offer the potential to assess astrobiological potential and hydrological history in a variety of settings, including surface mineralized terraces, associated stream deposits, and subsurface environments where organic remains may have been well protected from oxidation. Previous attempts to identify martian spring deposits from orbit have been general or limited by resolution of available data [12-14]. However, new satellite imagery from HiRISE has a resolution of 28 cm/pixel, and based on these new data, we have interpreted several features in Vernal Crater, Arabia Terra as ancient hydrothermal springs [15, 16].

Allen, Carlton C.↗
NASA NTRS2018

Mission Concept for a Europa Lander

A NASA HQ-directed study team led by the Jet Propulsion Laboratory (JPL) with partners including Applied Physics Lab, Marshall Space Flight Center, Goddard Space Flight Center, Langley Research Center and Sandia National Laboratory has recently presented a mission concept for a Europa Lander that would search for bio-signatures and signs of life in the near-subsurface of the Jovian moon. The mission would follow the Europa Clipper multiple-flyby mission, planned for launch in June of 2022, which would provide reconnaissance imagery and other data to the Lander for use in selecting a scientifically compelling site and certifying it for engineering safety. The Europa Lander concept accommodates the Model Payload identified by the Europa Lander Science Definition Team (SDT) and documented in the Europa Lander Study 2016 Report released in February of 2017. The currently envisioned Europa Lander would launch on an SLS Block 1B as early as October of 2025 into a VEGA trajectory, arriving in the Jovian system as early as July of 2030. The baseline design of the integrated flight system includes a dedicated Carrier and Relay Stage, a Deorbit Vehicle composed of a Deorbit Stage consisting of a solid rocket motor (SRM), an MSL-like sky-crane Descent Stage, and a Lander which accommodates the instrument suite. The Lander would be powered by primary batteries over a 20-day surface mission. The science goals envisioned by the SDT require five samples taken from a depth of 10cm, a depth chosen to ensure minimal radiation processing of the potential biomarkers. Mission challenges include the large launch mass, unknown terrain topography, surface composition and materials properties, the high radiation environment, and complying with stringent planetary protection requirements. The mission concept uses a strategy of early risk reduction and overlapping requirements to provide robustness to harsh and uncertain environments. Early risk reduction efforts are aimed at maturing technologies associated with the sampling system, the intelligent landing system, high specific energy batteries, low mass and power motor controllers, and a thermal sterilization system.

Dooley, Jennifer↗
NASA NTRSDate not supplied

Phyllosilicate Formation on Early Mars Via Open-System Acid Alteration of Basaltic Glass

Smectites are widespread on Mars, but neutral/alkaline conditions favorable for smectite formation have surprisingly not led to abundant carbonates. Smectite formation on Mars could also occur in acidic environments unfavorable for carbonate formation. Acidic smectite formation has been demonstrated in batch (closed hydrologic) systems, however, the mechanisms and octahedral composition of smectite forming in acidic flow-through (open hydrologic) systems are not fully understood. Stapafell basaltic glass was hydrothermally altered (190◦C) at two flow rates corresponding to low and high water to rock ratio (W/R) and initial pH (pH_0) values of 2, 3, 4 and 6, and a batch low W/R experiment was conducted at pH_0 2. Kaolinite, montmorillonite and chlorite formed at pH_0 2 at low W/R; no phyllosilicates formed at pH_0 2 at high W/R; and lizardite formed at pH_0 ≥3 at both W/R ratios. Lizardite, kaolinite, and montmorillonite in these experiments formed by precipitation from solution and chlorite likely formed through alteration of montmorillonite and/or basalt. Saponite formed at pH_0 2 in batch conditions by alteration of basaltic glass. Comparison of experimental data with martian phyllosilicate assemblages indicated that smectite formation on Mars likely occurred under water-limited conditions. Al-rich smectite could form in open-system low W/R subsurface environments under a narrow range of pH (pH <3) while saponite could form in closed low W/R systems under acidic to alkaline conditions. Combined open and closed hydrological regimes could be responsible for development of clay mineral stratigraphies observed on Mars. The acidic conditions required for formation of Al-rich smectite were unfavorable for carbonate precipitation, but carbonate precipitation could occur together with Fe/Mg-smectite in closed systems at pH >4. The lack of carbonates occurring together with Fe/Mg-smectite could be cause by low pCO2 in subsurface closed environments and/or by overall lack of carbonate precipitation despite significant oversaturation.

S J Ralston↗
NASA NTRS2024

Surface Gravimetry Using Rover Navigation Systems

This prototype seeks to demonstrate the utility of repurposing a Micro-ElectroMechancical (MEMS) Inertial measurement Unit (IMU) to perform surface gravimetry on a rover. Gravimetry is a common analytical tool used for probing density distributions in the subsurface of a planetary body. Historically, extraterrestrial gravimetry has been confined to orbital platforms. While orbital surveys allow for the construction of global gravity models, the spatial resolution of the data is constrained by the platform’s orbital altitude and high inherent speed. Data collected at or near the surface would increase spatial resolution and allow finer-scale crustal structure to be resolved. To date, there have been only two extraterrestrial surface gravity surveys: the Apollo 17 Traverse Gravimeter Experiment and a survey using the MEMS accelerometers contained within the Curiosity rover’s IMUs. The Curiosity survey highlighted the potential of using MEMS technology to perform planetary gravimetry, albeit with lower sensitivities than traditional surface gravimeters. MEMS accelerometers are included on every rover platform as part of the IMU navigation systems. MEMS accelerometers have low mass, cost, and power requirements while being robust across a range of environments, whereas traditional gravimeters are fragile, costly, and relatively massive (≥8kg versus ≈50g for MEMS IMUs). Thus, the emergence of MEMS gravimeters provides a low-risk and cost-effective method for performing planetary surface gravimetry [3,4]. Here, we present a method to recalibrate the MEMS accelerometers in rover IMUs to collect gravimetric measurements. Such measurements could assist current and future rover missions and support wider efforts to mature MEMS gravimeters.

C S Lawson↗
NASA NTRS2024

Clear Lake Volcanic Field Disasters: Creating a Deformation Record Using InSAR to Assess Hazards and Detect Volcanic Unrest in Clear Lake Volcanic Field

Clear Lake Volcanic Field (CLVF) in northern California is at a high threat potential for volcanic hazards. Eruptions leading to increased seismic activity could result in silicic domes, cinder cones, and flows that would be dangerous to the residential areas near the volcanic field. Remotely sensed Earth observations can reveal volcanic processes in the subsurface, which are essential to the timely monitoring of potential volcanic activity. In particular, Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Digital Elevation Model (DEM) data capture relative surface deformation at unprecedented high spatial and temporal resolutions. Leveraging C-SAR and DEMs, we conducted interferometric analysis from January 2016 to December 2023. Our results demonstrate 1) the mean surface displacement velocity of the Clear Lake Volcanic Field is measured to undergo 5 to 10-centimeter scale deformation and shows a strong relationship with the surrounding faults, 2) apparent seasonal differences in rates of surface change, and 3) seismic activity associated with the geyser geothermal field has a strong association with cumulative surface displacement, with active fault zones having 2 to 5 cm of additional displacement. Results indicate that deformation is linked to deep pressure sources causing stresses on the surficial environment that should be considered in hazard mitigation. This study provides a baseline of historic deformation, aiding hazard analysts in communication efforts and streamlining decision-making for potential risks to region residents.

remote sensing↗
NASA NTRSDate not supplied

Creating a Deformation Time Series Utilizing InSAR to Assess Hazards and Detect Volcanic Unrest in Clear Lake Volcanic Field, California

According to the U.S Geological Survey, the Clear Lake Volcanic Field (CLVF) in northern California is at a high threat potential for volcanic hazards. Eruptions leading to increased seismic activity could result in silicic domes, cinder cones, and flows that would be dangerous to the residential areas near the volcanic field. Remotely sensed Earth observations can reveal volcanic processes in the subsurface, which are essential to the timely monitoring of potential volcanic activity. In particular, Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Digital Elevation Model (DEM) data capture relative surface deformation at unprecedented high spatial and temporal resolutions. Leveraging C-SAR and DEMs, we conducted interferometric analysis from January 2016 to December 2023. Our results demonstrate 1) the mean surface displacement velocity of the Clear Lake Volcanic field is measured to undergo 5 to 10-centimeter scale deformation and shows a strong correlation with the surrounding faults, 2) apparent seasonal differences in rates of surface change, and 3) seismic activity associated with the geyser geothermal field has a strong correlation with cumulative surface displacement, with active fault zones having 2 to 5 cm of additional displacement. Results indicate that deformation is linked to deep pressure sources causing stresses on the surficial environment that should be considered in hazard mitigation. This study provides a baseline of historic deformation, aiding hazard analysts in communication efforts and streamlining decision-making for potential risks to region residents.

Ivan Tochimani-Hernandez↗
NASA NTRS1999

Visualization of Subsurface Defects in Composites using a Focal Plane Array Infrared Camera

A technique for enhanced defect visualization in composites via transient thermography is presented in this paper. The effort targets automated defect map construction for multiple defects located in the observed area. Experimental data were collected on composite panels of different thickness with square inclusions and flat bottom holes of different depth and orientation. The time evolution of the thermal response and spatial thermal profiles are analyzed. The pattern generated by carbon fibers and the vignetting effect of the focal plane array camera make defect visualization difficult. An improvement of the defect visibility is made by the pulse phase technique and the spatial background treatment. The relationship between a size of a defect and its reconstructed image is analyzed as well. The image processing technique for noise reduction is discussed.

Plotnikov, Yuri A.↗
NASA NTRS2015

The Radiation Stability of Glycine in Solid CO2 - In Situ Laboratory Measurements with Applications to Mars

The detection of biologically important, organic molecules on Mars is an important goal that may soon be reached. However, the current small number of organic detections at the martian surface may be due to the harsh UV and radiation conditions there. It seems likely that a successful search will require probing the subsurface of Mars, where penetrating cosmic rays and solar energetic particles dominate the radiation environment, with an influence that weakens with depth. Toward the goal of understanding the survival of organic molecules in cold radiation-rich environments on Mars, we present new kinetics data on the radiolytic destruction of glycine diluted in frozen carbon dioxide. Rate constants were measured in situ with infrared spectroscopy, without additional sample manipulation, for irradiations at 25, 50, and 75 K with 0.8-MeV protons. The resulting half-lives for glycine in CO2-ice are compared to previous results for glycine in H2O-ice and show that glycine in CO2-ice is much less stable in a radiation environment, with destruction rate constants approximately 20-40 times higher than glycine in H2O-ice. Extrapolation of these results to conditions in the martian subsurface results in half-lives estimated to be less than 100-200 Myr even at depths of a few meters.

Ices↗
NASA NTRS1974

Microwave remote sensing of ice and snow

A composite theoretical model is proposed to account for effects on emissivity caused by layering, absorption, anisotropy, surface roughness, inhomogeneities and subsurface scattering. The emissivity as a function of frequency is calculated for a two layer model simulating ice or snow covered water or land. The theoretical results are compared with experimental data.

Kong, J. A.↗
NASA NTRS1992

Thermally distinct ejecta blankets from Martian craters

The study of ejecta blankets on Mars gives information about the Martian surface, subsurface, geologic history, atmospheric history, and impact process. In Feb. and Mar. 1989, the Termoskan instrument on board the Phobos 1988 spacecraft of the USSR acquired the highest spatial resolution thermal data ever obtained for Mars, ranging in the resolution from 300 meters to 3 km per pixel. Termoskan simultaneously obtained broad band visible channel data. The data covers a large portion of the equatorial region from 30 degrees S latitude to 6 degrees N latitude. Utilizing the data set we have discovered tens of craters with thermal infrared distinct ejecta (TIDE) in the equatorial regions of Mars. In order to look for correlations within the data, we have compiled a database which currently consists of 110 craters in an area rich in TIDE's and geologic unit variations. For each crater, we include morphologic information from Barlow's Catalog of Large Martian Impact Craters in addition to geographic, geologic, and physical information and Termoskan thermal infrared and visible data.

Betts, B. H.↗
NASA NTRS1981

Application of millimeter-wave remote sensing to the investigation of comets

It is pointed out the despite years of investigation, the solid, quasi-permanent component of comets, the nucleus, remains largely a mystery. The composition and thermal properties of the nucleus determine the evolution of the more familiar and often spectacular cometary features, the coma and tail. Under certain circumstances, the nucleus may be obscured by a dust cloud of much higher temperature. The most appropriate technology for the investigation of the surface and subsurface layers of the nucleus is considered to be millimeter-wave sensing from an interplanetary spacecraft. Simple radiative transfer models, adapted from methods employed for the interpretation of remote-sensing data on terrestrial ice and snow fields, are used to predict the millimeter-wave spectra of representative model nuclei. The spectra determine the choice of the minimum set of observing frequencies that is required. An instrument configuration driven by these requirements and guided by available technology and the restraints of a proposed NASA spacecraft is then derived.

Hobbs, R. W.↗
NASA NTRS1992

Primary production estimates from recordings of solar-stimulated fluorescence in the equatorial Pacific at 150 deg W

Biological, optical, and hydrographical data were collected on the WEC88 cruise along 150 deg W and during a 6-day time-series station on the equator during February/March 1988. This area was characterized by a subsurface chlorophyll maximum (SCM), located at 50-70 m depth at the equator and descending down to 120-125 m at the north and south end of the transect. Highest primary production rates were near-surface and confined to the equatorial region and stations between 7 deg and 11 deg N. To determine the relationship between solar-stimulated fluorescence (centered at 683 nm wavelength) and primary production, a production-fluorescence model based on phytoplankton physiology and marine optics is described. Results of model calculations predict that there is a linear relation between production and fluorescence. A comparison between morning and midday measurements of the production-fluorescence relation showed that there was some difference between the two, whereas evening measurements, on the other hand, were distinctly different from the morning/midday ones. This seems to suggest that diurnal variations contribute significantly to variability in the quantum yield of photochemical processes. The ratio of the quantum yield of photosynthesis to the quantum yield of fluorescence ranged between 0.24 and 0.44 molC/Ein for all stations. The highest value for this ratio occurred at the equatorial stations, indicating that latitudinal variability could have an effect on the production-fluorescence relation.

Stegmann, P. M.↗
NASA NTRS1992

Eddy current inspection of weld defects in tubing

An approach using differential probes for the inspection of weld defects in tubing is studied. Finite element analysis is used to model the weld regions and defects. Impedance plane signals are predicted for different weld defect types and compared wherever possible with signals from actual welds in tubing. Results show that detection and sizing of defects in tubing is possible using differential eddy current techniques. The phase angle of the impedance plane trajectory gives a good indication of the sizing of the crack. Data on the type of defect can be obtained from the shape of the impedance plane trajectory and the phase. Depending on the skin depth, detection of outer wall, inner wall, and subsurface defects is possible.

Katragadda, G.↗
NASA NTRS2004

Martian Surface Properties: Inferences from Resolved Differences in Crater Geometries

Impact craters are a natural probe of planetary sub-surfaces, both from the excavated material and from crater geometries, which are sensitive to material properties of the target. One of the most intriguing aspects of Martian craters is the morphology of the ejecta blankets. All fresh and many older Martian craters larger than a few km are surrounded by ejecta blankets which appear fluidized, with morphologies believed to form by entrainment of liquid water. In addition to the ejecta morphology, quantitative information about the subsurface composition may be derived from geometrical measurements, e.g., rim uplift height and ejecta blanket volumes. In order to use craters to derive subsurface composition or test rampart morphology formation hypotheses, accurate measurements with quantified error estimates are required. We have developed and tested a toolkit for measurements of crater geometry using the MOLA altimetry data. Here, we present the results from geometry measurements on fresh craters in Lunae Planum and Utopia Planitia.

Valiant, G. J.↗
NASA NTRS2012

Phytoplankton Assemblage Patterns in the Southern Mid-Atlantic Bight

As part of the Wallops Coastal Oceans Observing Laboratory (Wa-COOL) Project, we sampled a time-series transect in the southern Mid-Atlantic Bight (MAB) biweekly. Our 2-year time-series data included physical parameters, nutrient concentrations, and chlorophyll a concentrations. A detailed phytoplankton assemblage structure was examined in the second year. During the 2-year study, chlorophyll a concentration (and ocean color satellite imagery) indicated that phytoplankton blooms occurred in January/February during mixing conditions and in early autumn under stratified conditions. The chlorophyll a concentrations ranged from 0.25 microgram 1(exp -1) to 15.49 microgram 1(exp -1) during the 2-year period. We were able to discriminate approximately 116 different species under phase contrast microscopy. Dominant phytoplankton included Skeletonema costatum, Rhizosolenia spp., and Pseudo-nitzschia pungens. In an attempt to determine phytoplankton species competition/succession within the assemblage, we calculated a Shannon Weaver diversity index for our diatom microscopy data. Diatom diversity was greatest during the winter and minimal during the spring. Diatom diversity was also greater at nearshore stations than at offshore stations. Individual genera appeared patchy, with surface and subsurface patches appearing abruptly and persisting for only 1-2 months at a time. The distribution of individual species differed significantly from bulk variables of the assemblage (chlorophyll a ) and total phytoplankton assemblage (cells), which indicates that phytoplankton species may be limited in growth in ways that differ from those of the total assemblage. Our study demonstrated a highly diverse phytoplankton assemblage throughout the year, with opportunistic species dominating during spring and fall in response to seasonal changes in temperature and nutrients in the southern MAB.

Mid-Atlantic↗
NASA NTRS2004

A Subsurface Soil Composition and Physical Properties Experiment to Address Mars Regolith Stratigraphy

Previous in-situ measurements of soil-like materials on the surface of Mars, in particular during the on-going Mars Exploration Rover missions, have shown complex relationships between composition, exposure to the surface environment, texture, and local rocks. In particular, a diversity in both compositional and physical properties could be established that is interpreted to be diagnostic of the complex geologic history of the martian surface layer. Physical and chemical properties vary laterally and vertically, providing insight into the composition of rocks from which soils derive, and environmental conditions that led to soil formation. They are central to understanding whether habitable environments existed on Mars in the distant past. An instrument the Mole for Soil Compositional Studies and Sampling (MOCSS) - is proposed to allow repeated access to subsurface regolith on Mars to depths of up to 1.5 meters for in-situ measurements of elemental composition and of physical and thermophysical properties, as well as for subsurface sample acquisition. MOCSS is based on the compact PLUTO (PLanetary Underground TOol) Mole system developed for the Beagle 2 lander and incorporates a small X-ray fluorescence spectrometer within the Mole which is a new development. Overall MOCSS mass is approximately 1.4 kilograms. Taken together, the MOCSS science data support to decipher the geologic history at the landing site as compositional and textural stratigraphy if they exist - can be detected at a number of places if the MOCSS were accommodated on a rover such as MSL. Based on uncovered stratigraphy, the regional sequence of depositional and erosional styles can be constrained which has an impact on understanding the ancient history of the Martian near-surface layer, considering estimates of Mars soil production rates of 0.5... 1.0 meters per billion years on the one hand and Mole subsurface access capability of approximately 1.5 meters. An overview of the MOCSS, XRS instrument accomodation and the impact that these instruments have on Mars science is discussed.

Richter, L.↗
NASA NTRS2010

Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Solar Dynamics Observatory-Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler-velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time - distance helioseismology pipeline (Zhao et al., Solar Phys. submitted, 2010) has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross-covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time - distance helioseismology: a Gabor-wavelet fitting (Kosovichev and Duvall, SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, Astrophys. J. 571, 966, 2002), and a linearized version of the minimization method (Gizon and Birch, Astrophys. J. 614, 472, 2004). Using Doppler-velocity data from the Michelson Doppler Imager (MDI) instrument onboard SOHO, we tested and compared these definitions for the mean and difference traveltime perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet-Sun region, the method of Gizon and Birch (Astrophys. J. 614, 472, 2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997) and Gizon and Birch (Astrophys. J. 571, 966, 2002). We investigated the relationships among these three travel-time definitions, their sensitivities to fitting parameters, and estimated the random errors that they produce.

HMI↗
NASA NTRS1973

Ten-micron eclipse observations of Io, Europa, and Ganymede.

Eclipse observations of Jupiter's satellites Io, Europa, and Ganymede have been obtained in an 8 to 14-micron band pass during 1971. The simplest thermal model able to explain the data for each satellite is a two-layer surface structure with an upper layer, only a few millimeters thick, having low thermal conductivity consistent with fine rock powder or frost, and a subsurface having high thermal conductivity consistent with solid rock or dense ice. The upper layer on Io appears to be different from that on Europa and Ganymede, but the two-layer model fits all three satellites.

Hansen, O. L.↗